Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 14 de 14
Filtrar
1.
Environ Sci Technol ; 56(2): 1267-1277, 2022 01 18.
Artigo em Inglês | MEDLINE | ID: mdl-34981927

RESUMO

Polymers reinforced with virgin carbon fibers (VCF) are being used to make spar caps of wind turbine (WT) blades and polymers with glass fibers (GF) to make skins of the blade components. Here, we assess the life cycle environmental performance of the hybrid blades with spar caps based on VCF and the shells and shear webs based on RCF (recycled CF) composites (RCF-hybrid). The production of the WT blades and associated reinforced polymers is assumed to occur in Sweden, with their uses and end-of-life management in the European region. The functional unit is equivalent to three blades in an offshore WT with the market incumbent blades solely based on the GF composite or the hybrid option. The RCF-hybrid blades offer 12-89% better environmental performance in nine out of 10 impact categories and 6-26% better in six out of 10 impact categories. The RCF-hybrid blades exhibit optimum environmental performance when the VCF manufacturing facilities are equipped with pollution abatement systems including regenerative thermal oxidizers to reduce ammonia and hydrogen cyanide emissions; spar caps are made using VCF epoxy composites through pultrusion and resin infusion molding, and the blade scrap is mechanically recycled at the end of life. The energy and carbon payback times for the RCF-hybrid blades were found to be 5-13% lower than those of the market incumbents.


Assuntos
Carbono , Reciclagem , Fibra de Carbono , Suécia
2.
Environ Sci Technol ; 49(17): 10294-302, 2015 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-26247853

RESUMO

Silicon carbide and gallium nitride, two leading wide band gap semiconductors with significant potential in electric vehicle power electronics, are examined from a life cycle energy perspective and compared with incumbent silicon in U.S. light-duty electric vehicle fleet. Cradle-to-gate, silicon carbide is estimated to require more than twice the energy as silicon. However, the magnitude of vehicle use phase fuel savings potential is comparatively several orders of magnitude higher than the marginal increase in cradle-to-gate energy. Gallium nitride cradle-to-gate energy requirements are estimated to be similar to silicon, with use phase savings potential similar to or exceeding that of silicon carbide. Potential energy reductions in the United States vehicle fleet are examined through several scenarios that consider the market adoption potential of electric vehicles themselves, as well as the market adoption potential of wide band gap semiconductors in electric vehicles. For the 2015-2050 time frame, cumulative energy savings associated with the deployment of wide band gap semiconductors are estimated to range from 2-20 billion GJ depending on market adoption dynamics.


Assuntos
Conservação de Recursos Energéticos , Eletricidade , Veículos Automotores , Semicondutores , Compostos Inorgânicos de Carbono/química , Conservação de Recursos Energéticos/economia , Custos e Análise de Custo , Compostos de Silício/química , Estados Unidos , Emissões de Veículos/análise
3.
Environ Sci Technol ; 48(2): 1194-205, 2014 Jan 21.
Artigo em Inglês | MEDLINE | ID: mdl-24328392

RESUMO

Carbon nanotube (CNT) field emission displays (FEDs) are currently in the product development stage and are expected to be commercialized in the near future because they offer image quality and viewing angles comparable to a cathode ray tube (CRT) while using a thinner structure, similar to a liquid crystal display (LCD), and enable more efficient power consumption during use. To address concerns regarding the environmental performance of CNT-FEDs, a screening-level, cradle-to-grave life cycle assessment (LCA) was conducted based on a functional unit of 10,000 viewing hours, the viewing lifespan of a CNT-FED. Contribution analysis suggests the impacts for material acquisition and manufacturing are greater than the combined impacts for use and end-of-life. A scenario analysis of the CNT paste composition identifies the metal components used in the paste are key contributors to the impacts of the upstream stages due to the impacts associated with metal preparation. Further improvement of the manufacturing impacts is possible by considering the use of plant-based oils, such as rapeseed oil, as alternatives to organic solvents for dispersion of CNTs. Given the differences in viewing lifespan, the impacts of the CNT-FED were compared with a LCD and a CRT display to provide more insight on how to improve the CNT-FED to make it a viable product alternative. When compared with CRT technology, CNT-FEDs show better environmental performance, whereas a comparison with LCD technology indicates the environmental impacts are roughly the same. Based on the results, the enhanced viewing capabilities of CNT-FEDs will be a more viable display option if manufacturers can increase the product's expected viewing lifespan.


Assuntos
Equipamentos e Provisões Elétricas , Meio Ambiente , Nanotubos de Carbono/química , Modelos Teóricos , Incerteza
4.
Sci Total Environ ; 876: 162797, 2023 Jun 10.
Artigo em Inglês | MEDLINE | ID: mdl-36907394

RESUMO

The increased water scarcity, depletion of freshwater resources, and rising environmental awareness are stressing for the development of sustainable wastewater treatment processes. Microalgae-based wastewater treatment has resulted in a paradigm shift in our approach toward nutrient removal and simultaneous resource recovery from wastewater. Wastewater treatment and the generation of biofuels and bioproducts from microalgae can be coupled to promote the circular economy synergistically. A microalgal biorefinery transforms microalgal biomass into biofuels, bioactive chemicals, and biomaterials. The large-scale cultivation of microalgae is essential for the commercialization and industrialization of microalgae biorefinery. However, the inherent complexity of microalgal cultivation parameters regarding physiological and illumination parameters renders it challenging to facilitate a smooth and cost-effective operation. Artificial intelligence (AI)/machine learning algorithms (MLA) offer innovative strategies for assessing, predicting, and regulating uncertainties in algal wastewater treatment and biorefinery. The current study presents a critical review of the most promising AI/MLAs that demonstrate a potential to be applied in microalgal technologies. The most commonly used MLAs include artificial neural networks, support vector machine, genetic algorithms, decision tree, and random forest algorithms. Recent developments in AI have made it possible to combine cutting-edge techniques from AI research fields with microalgae for accurate analysis of large datasets. MLAs have been extensively studied for their potential in microalgae detection and classification. However, the ML application in microalgal industries, such as optimizing microalgae cultivation for increased biomass productivity, is still in its infancy. Incorporating smart AI/ML-enabled Internet of Things (IoT) based technologies can help the microalgal industries to operate effectively with minimum resources. Future research directions are also highlighted, and some of the challenges and perspectives of AI/ML are outlined. As the world is entering the digitalized industrial era, this review provides an insightful discussion about intelligent microalgal wastewater treatment and biorefinery for researchers in the field of microalgae.


Assuntos
Microalgas , Purificação da Água , Inteligência Artificial , Biocombustíveis , Aprendizado de Máquina , Biotecnologia , Biomassa
5.
ACS Nano ; 17(1): 137-145, 2023 01 10.
Artigo em Inglês | MEDLINE | ID: mdl-36535017

RESUMO

Dehydrogenation of methanol (CH3OH) into direct current (DC) in fuel cells can be a potential energy conversion technology. However, their development is currently hampered by the high cost of electrocatalysts based on platinum and palladium, slow kinetics, the formation of carbon monoxide intermediates, and the requirement for high temperatures. Here, we report the use of graphene layers (GL) for generating DC electricity from microbially driven methanol dehydrogenation on underlying copper (Cu) surfaces. Genetically tractable Rhodobacter sphaeroides 2.4.1 (Rsp), a nonarchetypical methylotroph, was used for dehydrogenating methanol at the GL-Cu surfaces. We use electrochemical methods, microscopy, and spectroscopy methods to assess the effects of GL on methanol dehydrogenation by Rsp cells. The GL-Cu offers a 5-fold higher power density and 4-fold higher current density compared to bare Cu. The GL lowers charge transfer resistance to methanol dehydrogenation by 4 orders of magnitude by mitigating issues related to pitting corrosion of underlying Cu surfaces. The presented approach for catalyst-free methanol dehydrogenation on copper electrodes can improve the overall sustainability of fuel cell technologies.


Assuntos
Fontes de Energia Bioelétrica , Grafite , Metanol/química , Cobre/química , Grafite/química , Eletrodos
6.
Sci Total Environ ; 793: 148560, 2021 Nov 01.
Artigo em Inglês | MEDLINE | ID: mdl-34328971

RESUMO

The increasing use of engineered nanoparticles (ENPs) in consumer products has led to their increased presence in natural water systems. Here, we present a critical overview of the studies that analyzed the fate and transport behavior of ENPs using real environmental samples. We focused on cerium dioxide, titanium dioxide, silver, carbon nanotubes, and zinc oxide, the widely used ENPs in consumer products. Under field scale settings, the transformation rates of ENPs and subsequently their physicochemical properties (e.g., toxicity and bioavailability) are primarily influenced by the modes of interactions among ENPs and natural organic matter. Other typical parameters include factors related to water chemistry, hydrodynamics, and surface and electronic properties of ENPs. Overall, future nanomanufacturing processes should fully consider the health, safety, and environmental impacts without compromising the functionality of consumer products.


Assuntos
Nanopartículas , Nanotubos de Carbono , Poluentes Químicos da Água , Óxido de Zinco , Nanopartículas/toxicidade , Prata , Poluentes Químicos da Água/análise
7.
Environ Pollut ; 265(Pt A): 114990, 2020 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-32585398

RESUMO

Increasing demand for biofuel production and global competition for the use of natural resources are key factors in finding new and environmentally safe routes for methanol production. In the present study, life cycle assessment was used to analyse the potential environmental impact and environmental cost of a novel methanol production process from wood compared to a conventional processes. Both the novel and the conventional process were divided into three stages: pre-treatment, gasification, and syngas cleaning and methanol synthesis. The environmental impacts were assessed and compared using Simapro 9 (ecoinvent 3.5 database) and the ReCiPe 2016 (World-H) midpoint method. The results, expressed per tonne methanol, showed that the impact categories of global warming potential (GWP) and marine ecotoxicity potential were lower in the novel process in comparison to the conventional process (48.2 kg CO2 eq. vs. 63.1 kg CO2 eq., and 4.55 kg 1,4-DCB vs. 6.35 kg 1,4-DCB respectively). However, the novel process had a higher environmental impact in the pre-treatment stage. The results of the sensitivity analysis showed that the GWP of the novel process increased from 48.2 kg CO2 eq. to 216 kg CO2 eq. due to the replacement of Na2CO3 by K2CO3. The human toxicity impact categories showed significant impact on environmental cost. These findings will help relevant industries to reduce their environmental impact and improve the production efficiency of methanol from wood.


Assuntos
Metanol , Madeira , Biocombustíveis , Biomassa , Meio Ambiente , Humanos
8.
Water Res ; 43(1): 148-56, 2009 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-18929383

RESUMO

Adsorption equilibrium and kinetics of Bacillus subtilis spores on single-walled carbon nanotube aggregates were investigated to explore the possibility of using single-walled carbon nanotubes for concentration, detection and removal of pathogens from contaminated water sources. Batch adsorption experiments were conducted to determine adsorption kinetics and adsorption equilibrium of B. subtilis spores on single-walled carbon nanotube aggregates, activated carbon and NanoCeram. The adsorption kinetics data were analyzed with both the Lagergren pseudo first order and a pseudo second order models. The adsorption equilibrium data on three porous media were quantified by the Henry's law constant. It was observed that both the Lagergren first order rate model and the pseudo second order model correlate the adsorption kinetic data well although the calculated adsorption rate constants vary with adsorbate concentrations. The Henry's law adsorption equilibrium constant of B. subtilis spores on single-walled carbon nanotube aggregates is about 27-37 times higher than those on activated carbon and NanoCeram. The high adsorption affinity of carbon nanotubes towards the B. subtilis spores is due to the mesoporous structure and unique surface properties of carbon nanotubes. These results suggest that single-walled carbon nanotube aggregates are good candidates as biosensors and adsorbent media for concentrating, detecting and removal of pathogens from contaminated water resources.


Assuntos
Bacillus subtilis/metabolismo , Carvão Vegetal/metabolismo , Recuperação e Remediação Ambiental , Nanopartículas/microbiologia , Nanotubos de Carbono/microbiologia , Adsorção , Bacillus subtilis/ultraestrutura , Cinética , Porosidade , Esporos Bacterianos/metabolismo , Esporos Bacterianos/ultraestrutura , Propriedades de Superfície , Temperatura
9.
Water Sci Technol ; 58(1): 179-84, 2008.
Artigo em Inglês | MEDLINE | ID: mdl-18653952

RESUMO

Batch adsorption studies to determine adsorption kinetics of Escherichia coli (E.coli) K12 and Staphylococcus aureus (S.aureus) SH 1000 bacterial cells on single-walled carbon nanotube aggregates were performed at two different initial concentrations. The diffusivity of E. coli cells in single-walled carbon nanotube aggregates obtained was 6.54 x 10(-9) and 8.98 x 10(-9) cm(2)/s, whereas that of S. aureus was between 1.00 x 10(-7) and 1.66 x 10(-7) cm(2)/s respectively. In addition to batch adsorption studies, electron microscopy studies were also conducted. The results suggest that diffusion kinetics of bacterial cells is concentration dependent as well as bacteria dependent. Diffusivity of S. aureus is two orders of magnitude greater than E. coli cells. This proves to be beneficial from an adsorption perspective where it is desired to filter microorganisms (water pretreatment and wastewater post treatment) and from nanotube biosensor perspective where it is desired to simultaneously capture and detect biothreat agents in a shorter span of time.


Assuntos
Escherichia coli/isolamento & purificação , Nanotubos de Carbono , Esgotos/microbiologia , Staphylococcus aureus/isolamento & purificação , Microbiologia da Água , Adsorção , Bioterrorismo/prevenção & controle , Contagem de Colônia Microbiana/métodos , Difusão , Escherichia coli/ultraestrutura , Cinética , Microscopia Eletrônica
10.
ACS Nano ; 12(3): 2242-2252, 2018 03 27.
Artigo em Inglês | MEDLINE | ID: mdl-29432687

RESUMO

We report the use of a single layer of two-dimensional hexagonal boron nitride (SL-hBN) as the thinnest insulating barrier to microbial corrosion induced by the sulfate-reducing bacteria Desulfovibrio alaskensis G20. We used electrochemical methods to assess the corrosion resistance of SL-hBN on copper against the effects of both the planktonic and sessile forms of the sulfate-reducing bacteria. Cyclic voltammetry results show that SL-hBN-Cu is effective in suppressing corrosion effects of the planktonic cells at potentials as high as 0.2 V ( vs Ag/AgCl). The peak anodic current for the SL-hBN coatings is ∼36 times lower than that of bare Cu. Linear polarization resistance tests confirm that the SL-hBN coatings serve as a barrier against corrosive effects of the G20 biofilm when compared to bare Cu. The SL-hBN serves as an impermeable barrier to aggressive metabolites and offers ∼91% corrosion inhibition efficiency, which is comparable to much thicker commercial coatings such as polyaniline. In addition to impermeability, the insulating nature of SL-hBN suppresses galvanic effects and improves its ability to combat microbial corrosion.


Assuntos
Biofilmes , Compostos de Boro/química , Cobre/química , Desulfovibrio/fisiologia , Biofilmes/efeitos dos fármacos , Corrosão , Desulfovibrio/efeitos dos fármacos , Técnicas Eletroquímicas , Eletrodos , Propriedades de Superfície
11.
Environ Sci Process Impacts ; 19(2): 141-153, 2017 Feb 22.
Artigo em Inglês | MEDLINE | ID: mdl-28091679

RESUMO

Biodiesel is a widely used fuel that meets the renewable fuel standards developed under the Energy Policy Act of 2005. However, biodiesel is known to pose a series of abiotic and biotic corrosion risks to storage tanks. A typical practice (incumbent system) used to protect the tanks from these risks include (i) coating the interior surface of the tank with a solvent-free epoxy (SFE) liner, and (ii) adding a biocide to the tank. Herein, we present a screening-level life-cycle assessment study to compare the environmental performance of a graphene oxide (GO)-epoxy (GOE) liner with the incumbent system. TRACI was used as an impact assessment tool to model the midpoint environmental impacts in ten categories: global warming potential (GWP, kg CO2 eq.); acidification potential (AP, kg SO2 eq.); potential human health damage impacts due to carcinogens (HH-CP, CTUh) and non-carcinogens (HH-NCP, CTUh); potential respiratory effects (REP, kg PM2.5 eq.); eutrophication potential (EP, kg N eq.); ozone depletion potential (ODP kg CFC-11 eq.); ecotoxicity potential (ETXP, CTUe); smog formation potential (SFP kg O3 eq.) and fossil fuel depletion potential (FFDP MJ surplus). The equivalent functional unit of the LCA study was designed to protect 30 m2 of the interior surface (unalloyed steel sheet) of a 10 000 liter biodiesel tank against abiotic and biotic corrosion during its service life of 20 years. Overall, this LCA study highlights the improved environmental performance for the GOE liner compared to the incumbent system, whereby the GOE liner showed 91% lower impacts in ODP impact category, 59% smaller in REP, 62% smaller in AP, 67-69% smaller in GWP and HH-CP, 72-76% smaller in EP, SFP, and FFDP, and 81-83% smaller ETXP and HH-NCP category results. The scenario analysis study revealed that these potential impacts change by less than 15% when the GOE liners are functionalized with silanized-GO nanosheets or GO-reinforced polyvinyl carbazole to improve the antimicrobial properties. The results from an uncertainty analysis indicated that the impacts for the incumbent system were more sensitive to changes in the key modeling parameters compared to that for the GOE liner system.


Assuntos
Biocombustíveis , Resinas Epóxi , Grafite , Aço , Corrosão , Meio Ambiente , Eutrofização , Combustíveis Fósseis , Aquecimento Global , Humanos , Modelos Teóricos , Medição de Risco
12.
Anal Chim Acta ; 715: 1-18, 2012 Feb 17.
Artigo em Inglês | MEDLINE | ID: mdl-22244163

RESUMO

There is a great necessity for development of novel sensory concepts supportive of smart sensing capabilities in defense and homeland security applications for detection of chemical and biological threat agents. A smart sensor is a detection device that can exhibit important features such as speed, sensitivity, selectivity, portability, and more importantly, simplicity in identifying a target analyte. Emerging nanomaterial based sensors, particularly those developed by utilizing functionalized gold nanoparticles (GNPs) as a sensing component potentially offer many desirable features needed for threat agent detection. The sensitiveness of physical properties expressed by GNPs, e.g. color, surface plasmon resonance, electrical conductivity and binding affinity are significantly enhanced when they are subjected to functionalization with an appropriate metal, organic or biomolecular functional groups. This sensitive nature of functionalized GNPs can be potentially exploited in the design of threat agent detection devices with smart sensing capabilities. In the presence of a target analyte (i.e., a chemical or biological threat agent) a change proportional to concentration of the analyte is observed, which can be measured either by colorimetric, fluorimetric, electrochemical or spectroscopic means. This article provides a review of how functionally modified gold colloids are applied in the detection of a broad range of threat agents, including radioactive substances, explosive compounds, chemical warfare agents, biotoxins, and biothreat pathogens through any of the four sensory means mentioned previously.


Assuntos
Produtos Biológicos/análise , Técnicas Biossensoriais/métodos , Substâncias para a Guerra Química/análise , Ouro/química , Nanopartículas Metálicas/química , Colorimetria/métodos , Técnicas Eletroquímicas/métodos , Fluorometria/métodos , Coloide de Ouro/química , Compostos Orgânicos/química , Análise Espectral Raman/métodos , Ressonância de Plasmônio de Superfície/métodos
13.
Biotechnol Adv ; 28(6): 802-16, 2010.
Artigo em Inglês | MEDLINE | ID: mdl-20599491

RESUMO

The ability of carbon nanotubes (CNTs) to undergo surface modification allows them to form nanocomposites (NCs) with materials such as polymers, metal nanoparticles, biomolecules, and metal oxides. The biocidal nature, protein fouling resistance, and fouling release properties of CNT-NCs render them the perfect material for biofouling prevention. At the same time, the cytotoxicity of CNT-NCs can be reduced before applying them as substrates to promote biofilm formation in environmental biotechnology applications. This paper reviews the potential prospects of CNT-NCs to accomplish two widely varying objectives in environmental engineering applications: (i) preventing biofouling, and (ii) promoting the formation of desirable biofilms on materials surface. This paper addresses practical issues such as costs, risks to human health, and ecological impacts that are associated with the application, development and commercialization of CNT-NC technology.


Assuntos
Materiais Biocompatíveis/química , Biofilmes/crescimento & desenvolvimento , Incrustação Biológica/prevenção & controle , Recuperação e Remediação Ambiental , Nanocompostos/química , Nanotubos de Carbono/química
14.
Sci Total Environ ; 408(1): 1-13, 2009 Dec 15.
Artigo em Inglês | MEDLINE | ID: mdl-19819525

RESUMO

Carbon nanotube (CNT) adsorption technology has the potential to support point of use (POU) based treatment approach for removal of bacterial pathogens, natural organic matter (NOM), and cyanobacterial toxins from water systems. Unlike many microporous adsorbents, CNTs possess fibrous shape with high aspect ratio, large accessible external surface area, and well developed mesopores, all contribute to the superior removal capacities of these macromolecular biomolecules and microorganisms. This article provides a comprehensive review on application of CNTs as adsorbent media to concentrate and remove pathogens, NOM, and cyanobacterial (microcystin derivatives) toxins from water systems. The paper also surveys on consideration of CNT based adsorption filters for removal of these contaminants from cost, operational and safety standpoint. Based on the studied literature it appears that POU based CNT technology looks promising, that can possibly avoid difficulties of treating biological contaminants in conventional water treatment plants, and thereby remove the burden of maintaining the biostability of treated water in the distribution systems.


Assuntos
Bactérias/isolamento & purificação , Nanotubos de Carbono/química , Poluentes da Água/isolamento & purificação , Purificação da Água/métodos , Abastecimento de Água , Adsorção , Filtração , Poluentes da Água/química , Poluentes da Água/toxicidade , Purificação da Água/economia , Purificação da Água/normas
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA