A Comprehensive Study of Gemfibrozil Complexation with ß-Cyclodextrins in Aqueous Solution Using Different Analytical Techniques.

Gemfibrozil (GEM) is a hypolipidemic agent, which is effective in reducing serum cholesterol and triglyceride levels. Complexation of GEM with native ß-cyclodextrin (ß-CD) and with the derivatives hydroxypropyl-ß- and randomly methylated ß-CD (HPß-CD and Meß-CD) was studied in aqueous solution of pH 2.8 and 7.0. The stability constants were determined by spectrofluorimetry, 1H-NMR spectroscopy and solubility assays. Considering the well-known difficulties to obtain similar stability constants by different techniques, the agreement of the values obtained supports the reliability of the results presented. The advantages and drawbacks of each analytical technique for the study of inclusion complexation were discussed as well. In addition, the thermodynamic parameters of complexation, enthalpy (ΔH) and entropy (ΔS), were determined and related to the type of molecular interactions that take place between GEM and the different cyclodextrins. Finally, solid dispersions were prepared by co-evaporation, kneading, vacuum desiccation, and coprecipitation, and complexation was evaluated by X-ray diffraction.

Aging Studies on Food Packaging Films Containing ß-Cyclodextrin-Grafted TiO2 Nanoparticles.

Polymeric materials, such as polyvinyl alcohol (PVA) and ethylene-PVA copolymers (EVOH) are widely used in the food sector as packaging materials because of their excellent properties. TiO2 nanoparticles (NPs) show photocatalytic activity; when added to the aforementioned polymers, on the one hand, they are expected to provide bactericidal capacity, whereas on the other hand, they could favor nanocomposite degradation. These types of nanoparticles can be derivatized with cyclodextrin macromolecules (CDs), which can act as food preservative carriers, increasing the packaging food protective properties. In this work, films containing ß-Cyclodextrin (ßCD)-grafted TiO2 nanoparticles and PVA or EVOH were prepared. Regarding the photocatalytic activity of the nanoparticles and the possible environmental protection, accelerated aging tests for PVA, EVOH, and their composites with cyclodextrin-grafted TiO2 nanoparticle (NP) films were performed by two methods, namely, stability chamber experiments at different conditions of temperature and relative humidity and UV light irradiation at different intensities. After analyzing the systems color changes (CIELAB) and Fourier transform infrared spectroscopy (FTIR) spectra, it was observed that the film degradation became more evident when increasing the temperature (25-80 °C) and relative humidity percentage (28-80%). There was no significant influence of the presence of CDs during the degradation process. When irradiating the films with UV light, the largest color variation was observed in the nanocomposite films, as expected. Moreover, the color change was more relevant with increasing NP percentages (1-5%) due to the high photocatalytic activity of TiO2. In addition, films were characterized by FTIR spectroscopy and variation in the signal intensities was observed, suggesting the increase of the material degradation in the presence of TiO2 NPs.

Plasmid-Templated Control of DNA-Cyclodextrin Nanoparticle Morphology through Molecular Vector Design for Effective Gene Delivery.

Engineering self-assembled superstructures through complexation of plasmid DNA (pDNA) and single-isomer nanometric size macromolecules (molecular nanoparticles) is a promising strategy for gene delivery. Notably, the functionality and overall architecture of the vector can be precisely molded at the atomic level by chemical tailoring, thereby enabling unprecedented opportunities for structure/self-assembling/pDNA delivery relationship studies. Beyond this notion, by judiciously preorganizing the functional elements in cyclodextrin (CD)-based molecular nanoparticles through covalent dimerization, here we demonstrate that the morphology of the resulting nanocomplexes (CDplexes) can be tuned, from spherical to ellipsoidal, rod-type, or worm-like nanoparticles, which makes it possible to gain understanding of their shape-dependent transfection properties. The experimental findings are in agreement with a shift from chelate to cross-linking interactions on going from primary-face- to secondary-face-linked CD dimers, the pDNA partner acting as an active payload and as a template. Most interestingly, the transfection efficiency in different cells was shown to be differently impacted by modifications of the CDplex morphology, which has led to the identification of an optimal prototype for tissue-selective DNA delivery to the spleen in vivo.

Release of ß-galactosidase from poloxamine/α-cyclodextrin hydrogels.

All mammals lose their ability to produce lactase (ß-galactosidase), the enzyme that cleaves lactose into galactose and glucose, after weaning. The prevalence of lactase deficiency (LD) spans from 2 to 15% among northern Europeans, to nearly 100% among Asians. Following lactose consumption, people with LD often experience gastrointestinal symptoms such as abdominal pain, bowel distension, cramps and flatulence, or even systemic problems such as headache, loss of concentration and muscle pain. These symptoms vary depending on the amount of lactose ingested, type of food and degree of intolerance. Although those affected can avoid the uptake of dairy products, in doing so, they lose a readily available source of calcium and protein. In this work, gels obtained by complexation of Tetronic 90R4 with α-cyclodextrin loaded with ß-galactosidase are proposed as a way to administer the enzyme immediately before or with the lactose-containing meal. Both molecules are biocompatible, can form gels in situ, and show sustained erosion kinetics in aqueous media. The complex was characterized by FTIR that evidenced an inclusion complex between the polyethylene oxide block and α-cyclodextrin. The release profiles of ß-galactosidase from two different matrices (gels and tablets) of the in situ hydrogels have been obtained. The influence of the percentage of Tetronic in media of different pH was evaluated. No differences were observed regarding the release rate from the gel matrices at pH 6 (t 50 = 105 min). However, in the case of the tablets, the kinetics were faster and they released a greater amount of 90R4 (25%, t 50 = 40-50 min). Also, the amount of enzyme released was higher for mixtures with 25% Tetronic. Using suitable mathematical models, the corresponding kinetic parameters have been calculated. In all cases, the release data fit quite well to the Peppas-Sahlin model equation, indicating that the release of ß-galactosidase is governed by a combination of diffusion and erosion processes. It has been observed that the diffusion mechanism prevails over erosion during the first 50 minutes, followed by continued release of the enzyme due to the disintegration of the matrix.

Antibacterial and degradable properties of ß-cyclodextrin-TiO2 cellulose acetate and polylactic acid bionanocomposites for food packaging.

Polylactic acid (PLA) and cellulose acetate (CA) as biodegradable polymers are being highly exploited in the development of innovative materials across several industrial sectors. PLA and CA composite films with TiO2 nanoparticles (NPs) and ß-cyclodextrin grafted TiO2 NPs were prepared. Thermo- and photo-degradation studies were performed on PLA and CA films and noticed that higher amount of TiO2 induce greater color variations, structure modifications and weight losses. It has been observed 9.3 % and 5.1 % maximum weight loss for 5 % TiO2 CA and PLA matrices, respectively. ßCD-modified TiO2 NPs increased the photo-degradation of the plain polymers to a lesser extent than TiO2 NPs. Benzoic acid (BA) and sorbic acid (SA) were incorporated to ßCD-TiO2 NPs and the antibacterial activity of PLA and CA composite films was studied by inactivation of Escherichia coli and Staphylococcus aureus. CA film filled with 5 % TiO2 NPs presented the highest antibacterial activity and achieved 71 % inhibition of E. coli and 88 % inhibition of S. aureus. CA composite films showed potential to be used as antimicrobial food packaging.

Cyclodextrin-grafted nanoparticles as food preservative carriers.

Photocatalytic properties of titanium dioxide nanoparticles (TiO2 NPs) have encouraged their use as fillers in polymer-based nanocomposites for application in food packaging. The surface modification of TiO2 NPs with cyclodextrins (CDs) can improve their functionality in a large extent. With this purpose, sorbic acid (SA) and benzoic acid (BA), commonly used as antifungal and antibacterial food preservatives, respectively, have been encapsulated in CD-grafted NPs. Inclusion complex formation of SA and BA with α and ßCDs in water has been assessed first by means of 1H NMR and UV-Vis spectroscopy to determine the affinity of the preservatives for the macrocycles and the stoichiometry of the complexes. The association constants of both preservatives were found to be lower for ßCD, however, the loading efficiency in ßCD-grafted NPs was higher than that exhibited by αCD-NPs. Release kinetics from the CD-grafted NPs have been carried out. In the case of SA, the αCD-grafted NPs showed a prolonged and sustained release profile, suggesting its application as microbial growth inhibition system if incorporated into packaging materials.

A Freeze-Thawing Method to Prepare Chitosan-Poly(vinyl alcohol) Hydrogels Without Crosslinking Agents and Diflunisal Release Studies.

Chitosan-poly(vinyl alcohol) hydrogels can be produced by the freeze-thawing method without using toxic crosslinking agents. The applications of these systems are limited by their characteristics (e.g., porosity, flexibility, swelling capacity, drug loading and drug release capacity), which depend on the freezing conditions and the kind and ratio of polymers. This protocol describes how to prepare hydrogels from chitosan and poly(vinyl alcohol) at 50/50 w/w % of polymer composition and varying the freezing temperature (-4 °C, -20 °C, -80 °C) and freeze-thawing cycles (4, 5, 6 freezing cycles). FT-IR spectra, SEM micrograph and porosimetry data of hydrogels were obtained. Also, the swelling capacity and drug loading and release of diflunisal were assessed. Results from SEM micrographs and porosimetry show that the pore size decreases, while the porosity increases at lower temperatures. The swelling percentage was higher at the minor freezing temperature. The release of diflunisal from the hydrogels has been studied. All the networks maintain the drug release for 30 h and it has been observed that a simple diffusion mechanism regulates the diflunisal release according to Korsmeyer-Peppas and Higuchi models.

Influence of soluble and insoluble cyclodextrin polymers on drug release from hydroxypropyl methylcellulose tablets.

BACKGROUND: The influence of beta-cyclodextrin (beta-CD) polymers on drug release from hydroxypropyl methylcellulose (HPMC) matrices has not been reported in the literature. AIM: The influence of monomeric beta-CD and both soluble and insoluble beta-CD polymers on drug release from tablets containing either 30% or 50% hydroxypropyl methylcellulose has been studied using diflunisal (DF) as model drug. METHOD: The DF-beta-CD inclusion complex (1:1 M) was prepared by coevaporation and characterised using X-ray diffraction, differential thermal analysis, and IR spectroscopy. The dissolution assays were performed according to the USP paddle method. RESULTS: The incorporation of beta-CD in the complexed form increases drug release from hydroxypropyl methylcellulose tablets in comparison with the physical mixture because of the better solubilization of the drug. The soluble polymer promotes drug release to a higher extent than the physical mixture with monomeric beta-CD, but the insoluble polymer, which is itself a hydrogel, gives rise to the most retarded release profile, probably by retention of the drug in its structure. The formulations containing physical mixtures with either beta-CD or the soluble polymer present an optimum adjustment to zero-order release kinetics, and the inclusion complex followed non-Fickian diffusion according to the Korsmeyer-Peppas model. CONCLUSION: The release profile of DF from a HPMC matrix can be modulated in different ways by the use of either monomeric or polymeric beta-CD.

Trehalose-based Siamese twin amphiphiles with tunable self-assembling, DNA nanocomplexing and gene delivery properties.

An original family of multivalent vectors encompassing gemini and facial amphiphilicity, namely cationic Siamese twin surfactants, has been prepared from the disaccharide trehalose; molecular engineering lets us modulate the self-assembling properties and the topology of the nanocomplexes with plasmid DNA for efficient gene delivery in vitro and in vivo.

Drug Release Properties of Diflunisal from Layer-By-Layer Self-Assembled κ-Carrageenan/Chitosan Nanocapsules: Effect of Deposited Layers.

Engineering of multifunctional drug nanocarriers combining stability and good release properties remains a great challenge. In this work, natural polymers κ-carrageenan (κ-CAR) and chitosan (CS) were deposited onto olive oil nanoemulsion droplets (NE) via layer-by-layer (LbL) self-assembly to study the release mechanisms of the anti-inflammatory diflunisal (DF) as a lipophilic drug model. The nano-systems were characterized by dynamic light scattering (DLS), zeta potential (ζ-potential) measurements, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (XEDS) and Fourier transform infrared spectroscopy (FTIR) to confirm the NE-coating with polymer layers. In addition, kinetic release studies of DF were developed by the dialysis diffusion bag technique. Mathematical models were applied to investigate the release mechanisms. The results showed that stable and suitably sized nanocapsules (~300 nm) were formed. Also, the consecutive adsorption of polyelectrolytes by charge reversal was evidenced. More interestingly, the drug release mechanism varied depending on the number of layers deposited. The nanosized systems containing up to two layers showed anomalous transport and first order kinetics. Formulations with three and four layers exhibited Case II transport releasing diflunisal with zero order kinetics. Hence, our results suggest that these polyelectrolyte nanocapsules have great potential as a multifunctional nanocarrier for drug delivery applications.

Preparation and Characterization of Polymer Composite Materials Based on PLA/TiO2 for Antibacterial Packaging.

Polymer composite materials based on polylactic acid (PLA) filled with titanium dioxide (TiO2) nanoparticles were prepared. The aim of this work was to investigate the antibacterial action of TiO2 against a strain of E. coli (DH5α) to obtain information on their potential uses in food and agro-alimentary industry. PLA/TiO2 systems were prepared by a two-step process: Solvent casting followed by a hot-pressing step. Characterization was done as a function of particle size (21 nm and <100 nm) and particle content (0%, 1%, 5%, 10%, and 20%, wt %). Structural characterization carried out by X-ray diffraction (XRD) and Fourier Transformed Infrared spectroscopy (FTIR) did not reveal significant changes in polymer structure due to the presence of TiO2 nanoparticles. Thermal characterization indicated that thermal transitions, measured by differential scanning calorimetry (DSC), did not vary, irrespective of size or content, whereas thermogravimetric analysis (TGA) revealed a slight increase in the temperature of degradation with particle content. Bacterial growth and biofilm formation on the surface of the composites against DH5α Escherichia coli was studied. Results suggested that the presence of TiO2 nanoparticles decreases the amount of extracellular polymeric substance (EPS) and limits bacterial growth. The inhibition distances estimated with the Kirby-Bauer were doubled when 1% TiO2 nanoparticles were introduced in PLA, though no significant differences were obtained for higher contents in TiO2 NPs.

Drug Carrier Systems Based on Cyclodextrin Supramolecular Assemblies and Polymers: Present and Perspectives.

The pharmaceutical applications of cyclodextrins (CDs), cyclic oligosaccharides capable of including hydrophobic molecules inside their cavities, have been known for decades. Besides the solubilising and encapsulating abilities of natural and modified CDs due to the formation of inclusion complexes, there is an increasing interest in organized macrostructures based on CDs as potential drug delivery devices and gene carrier systems. The present review discusses first the case of drug carriers based on monomeric modified CDs (amphiphilic and CD core-star polymers), in which self-assembly plays a major role. Polyrotaxanes, i.e., CDs threaded onto a polymer chain, are then reviewed in relation to their pharmaceutical applications. Finally, covalently linked CDs, either by grafting or crosslinking, are analyzed, including more complex structures formed by assembling CDcontaining networks or chains. We have tried along this review to cover the most recent developments on these structures for drug delivery in a "beyond the cyclodextrin" approach. The review will be helpful, both for readers who want to be introduced into the world of these remarkable structures, or for specialists who are doing research in this field.

HPLC and solubility study of the interaction between pindolol and cyclodextrins.

The complexation with beta-cyclodextrin (beta-CD) has been investigated using reversed-phase liquid chromatography. The compounds tested have been pindolol and, for comparison purposes, indole and 4-methoxyindole. The retention behaviour has been analysed on a Kromasil 100 C18 column and the mobile phase used was methanol-pH 6 phosphate buffer (15/85v/v) in which beta-CD was incorporated as a mobile phase additive. The decrease in the retention times with increasing concentrations of beta-CD enables the determination of the apparent stability constants of the complexes. In addition, the low solubility of pindolol, a weak base, in pH 12 aqueous solution has been improved by complexation with different cyclodextrins. The solubility enhancements with 1.4 x 10(-2) M beta-, hydroxypropyl-beta, and gamma-CD have been 1.9, 1.8 and 1.4-fold, respectively, with 2.4 x 10(-2) M methyl-beta-CD it was 2.8-fold whilst no effect was observed with alpha-CD. The stability constants of the complexes at pH 12 have been determined from the solubility isotherms.

In Vitro release from reverse poloxamine/α-cyclodextrin matrices: modelling and comparison of dissolution profiles.

Gels obtained by complexation of octablock star polyethylene oxide/polypropylene oxide copolymers (Tetronic 90R4) with α-cyclodextrin (α-CD) were evaluated as matrices for drug release. Both molecules are biocompatible so they can be potentially applied to drug delivery systems. Two different types of matrices of Tetronic 90R4 and α-CD were evaluated: gels and tablets. These gels are capable to gelifying in situ and show sustained erosion kinetics in aqueous media. Tablets were prepared by freeze-drying and comprising the gels. Using these two different matrices, the release of two model molecules, L-tryptophan (Trp), and a protein, bovine serum albumin (BSA), was evaluated. The release profiles of these molecules from gels and tablets prove that they are suitable for sustained delivery. Mathematical models were applied to the release curves from tablets to elucidate the drug delivery mechanism. Good correlations were found for the fittings of the release curves to different equations. The results point that the release of Trp from different tablets is always governed by Fickian diffusion, whereas the release of BSA is governed by a combination of diffusion and tablet erosion.

Characterization of complexes between naftifine and cyclodextrins in solution and in the solid state.

Naftifine (NF) is an antifungal drug poorly soluble in basic aqueous solutions. Complexation with cyclodextrins (CDs) improves the physicochemical characteristics of many drugs. The aim of this work is to characterize the interactions between NF and alpha-CD, beta-CD, hydroxypropylbeta-CD, methylbeta-CD, and gamma-CD. The studies have been developed in pH 12 aqueous solutions at 25 degrees C and in the solid state. The apparent stability constants of the complexes have been determined from phase-solubility diagrams. In the solid state, crystalline and amorphous complexes have been characterized using X-ray diffraction patterns, thermal analysis, and Fourier transform infrared spectroscopy. The solubility of NF improves with all the CDs studied, with the exception of alpha-CD. Different types of diagrams have been found depending on the CD used. The interaction between NF and hydroxypropylbeta-CD is stronger than that with beta-CD due to the specific properties of the substituents. The coevaporation method can be said the best method in preparing the solid complexes, except for NF-alpha-CD; again, there is no evidence of complexation. Furthermore, the presence of different types of CD structures upon complexation (i.e., cage or channel) has been discussed. Dissolution rate studies have been performed, and a positive influence of complexation in the solid state has been observed.

A fluorimetric study of pindolol and its complexes with cyclodextrins.

Spectrofluorimetric characteristics of pindolol have been investigated with the aim of using this technique for analytical determinations. Other monosubstituted indole derivatives, 4-methoxy and 5-methoxyindole, have been also studied for comparative purposes. Corrected excitation and emission wavelengths in different solvents are reported and the effect of solvent on the Stokes shifts of these compounds has been analysed using the Lippert equation. In addition, the Stokes shift of pindolol has been determined in dioxan-water solvent mixtures and the presence of specific solvent effects is discussed. The fluorescence of pindolol is pH dependent, the quantum yields determined in water are lower than those in other solvents. With respect to the sensitivity, it has been found that the detection limits in aqueous solutions are improved in the presence of beta and methyl-beta-cyclodextrin. Finally, a fluorimetric analysis of the interaction between pindolol and different cyclodextrins has been carried out in order to determine the apparent stability constants of the complexes and the thermodynamic parameters associated to complexation.