RESUMO
Recent far-reaching advances in synthetic biology have yielded exciting tools for the creation of new materials. Conversely, advances in the fundamental understanding of soft-condensed matter, polymers and biomaterials offer new avenues to extend the reach of synthetic biology. The broad and exciting range of possible applications have substantial implications to address grand challenges in health, biotechnology and sustainability. Despite the potentially transformative impact that lies at the interface of synthetic biology and biomaterials, the two fields have, so far, progressed mostly separately. This Perspective provides a review of recent key advances in these two fields, and a roadmap for collaboration at the interface between the two communities. We highlight the near-term applications of this interface to the development of hierarchically structured biomaterials, from bioinspired building blocks to 'living' materials that sense and respond based on the reciprocal interactions between materials and embedded cells.
Assuntos
Materiais Biocompatíveis , Biologia Sintética , PolímerosRESUMO
Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.
Assuntos
Anti-Infecciosos , Peptídeos Antimicrobianos , Humanos , Hidrogéis/farmacologia , Hidrogéis/química , Anti-Infecciosos/farmacologia , Anti-Infecciosos/química , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Antibacterianos/química , Materiais Biocompatíveis/farmacologia , Materiais Biocompatíveis/químicaRESUMO
Stem and progenitor cells that exhibit significant regenerative potential and critical roles in cancer initiation and progression remain difficult to characterize. Cell fates are determined by reciprocal signaling between the cell microenvironment and the nucleus; hence parameters derived from nuclear remodeling are ideal candidates for stem/progenitor cell characterization. Here we applied high-content, single cell analysis of nuclear shape and organization to examine stem and progenitor cells destined to distinct differentiation endpoints, yet undistinguishable by conventional methods. Nuclear descriptors defined through image informatics classified mesenchymal stem cells poised to either adipogenic or osteogenic differentiation, and oligodendrocyte precursors isolated from different regions of the brain and destined to distinct astrocyte subtypes. Nuclear descriptors also revealed early changes in stem cells after chemical oncogenesis, allowing the identification of a class of cancer-mitigating biomaterials. To capture the metrology of nuclear changes, we developed a simple and quantitative "imaging-derived" parsing index, which reflects the dynamic evolution of the high-dimensional space of nuclear organizational features. A comparative analysis of parsing outcomes via either nuclear shape or textural metrics of the nuclear structural protein NuMA indicates the nuclear shape alone is a weak phenotypic predictor. In contrast, variations in the NuMA organization parsed emergent cell phenotypes and discerned emergent stages of stem cell transformation, supporting a prognosticating role for this protein in the outcomes of nuclear functions.
Assuntos
Antígenos Nucleares/metabolismo , Núcleo Celular/metabolismo , Transformação Celular Neoplásica , Células-Tronco Mesenquimais/citologia , Proteínas Associadas à Matriz Nuclear/metabolismo , Adipócitos/citologia , Antígenos Nucleares/genética , Proteínas de Ciclo Celular , Diferenciação Celular , Linhagem Celular , Núcleo Celular/ultraestrutura , Separação Celular/métodos , Células Cultivadas , Humanos , Células-Tronco Mesenquimais/metabolismo , Proteínas Associadas à Matriz Nuclear/genética , Osteócitos/citologia , Análise de Célula Única/métodosRESUMO
The relationship between ECM mechanics and cell behavior is dynamic, as cells remodel and respond to changes in their local environment. Most inâ vitro substrates are static and supraphysiologically stiff; thus, platforms with dynamic and reversible mechanical changes are needed. Herein, we developed hyaluronic acid-based substrates capable of sequential photodegradation and photoinitiated crosslinking reactions to soften and then stiffen the hydrogels over a physiologically relevant range of moduli. Reversible mechanical signaling to adhered cells was demonstrated with human mesenchymal stem cells. Inâ situ hydrogel softening (from ca. 14 to 3.5â kPa) led to a decrease in the cell area and nuclear localization of YAP/TAZ, and subsequent stiffening (from ca. 3.5 to 28â kPa) increased the cell area and nuclear localization of YAP/TAZ. Each photoreaction was cytocompatible and tunable, rendering this platform amenable to studies of dynamic mechanics on cell behavior across many cell types and contexts.
Assuntos
Microambiente Celular , Hidrogéis/química , Células-Tronco Mesenquimais/citologia , Sondas Moleculares/química , Proteínas Adaptadoras de Transdução de Sinal/metabolismo , Biomimética , Núcleo Celular/metabolismo , Células Cultivadas , Matriz Extracelular/metabolismo , Humanos , Ácido Hialurônico/química , Peptídeos e Proteínas de Sinalização Intracelular/metabolismo , Células-Tronco Mesenquimais/metabolismo , Microscopia de Força Atômica , Fosfoproteínas/metabolismo , Processos Fotoquímicos , Polímeros/química , Reologia , Transativadores , Fatores de Transcrição , Proteínas com Motivo de Ligação a PDZ com Coativador Transcricional , Proteínas de Sinalização YAPRESUMO
Surface erosion has been recognized as a valuable design tool for resorbable biomaterials within the context of drug delivery devices, surface coatings, and when precise control of strength retention is critical. Here we report on high tensile strength, aromatic-aliphatic polycarbonates based on natural phenols, tyrosol (Ty) and homovanillyl alcohol (Hva), that exhibit enzymatic surface erosion by lipase. The Young's moduli of the polymers for dry and fully hydrated samples are 1.0 to 1.2 GPa and 0.8 to 1.2 GPa, respectively. Typical characteristics of enzymatic surface erosion were confirmed for poly(tyrosol carbonate) films with concomitant mass-loss and thickness-loss at linear rates of 0.14 ± 0.01 mg cm(-2) d(-1) and 3.0 ± 0.8 µm d(-1), respectively. The molecular weight and the mechanical properties of the residual films remained constant. Changing the ratio of Ty and Hva provided control over the glass transition temperature (T(g)) and the enzymatic surface erosion: increasing the Hva content in the polymers resulted in higher T(g) and lower enzymatic erosion rate. Polymers with more than 50 mol % Hva were stable at 37 °C in enzyme solution. Analysis on thin films using quartz crystal microbalance with dissipation (QCM-D) demonstrated that the onset temperature of the enzymatic erosion was approximately 20 °C lower than the wet T(g) for all tested polymers. This new finding demonstrates that relatively high tensile strength polycarbonates can undergo enzymatic surface erosion. Moreover, it also sheds light on the connection between T(g) and enzymatic degradation and explains why few of the high strength polymers follow an enzyme-meditated degradation pathway.
Assuntos
Ácido Homovanílico/química , Lipase/química , Álcool Feniletílico/análogos & derivados , Cimento de Policarboxilato/química , Materiais Biocompatíveis/química , Álcool Feniletílico/química , Poliésteres/química , Propriedades de Superfície , Temperatura , Resistência à TraçãoRESUMO
Background: We compared rates of successful polyethylene glycol (PEG) nerve fusion between two epineural suture repairs (2SR) and five epineural suture repairs (5SR) in a rat sciatic nerve transection neurorrhaphy model. We hypothesise that the two and five epineural neural suture repair groups will achieve a similar rate of PEG fusion. Methods: Twenty-five Lewis rats underwent bilateral sciatic nerve transection. Primary neurorrhaphy (PN) consisting of 2SR in one hind limb and 5SR in the contralateral hind limb was performed utilizing PEG fusion. Successful PEG fusion was confirmed by a distal muscle twitch after nerve stimulation proximal to the nerve fusion site. Sciatic nerve conduction velocity (SNCV) across the repair site and the force generated by tibialis anterior muscle (TAM) contraction were also compared between the 2SR and 5SR groups. Results: Success rates were 100% for the 2SR and the 5SR groups. No statistically significant differences in SNCV (P = 0.444) or isometric tetanic TAM contractile force (P = 0.820) were observed between 2SR and 5SR in the setting of PEG fusion. Conclusion: These findings demonstrate no significant difference in successful PEG fusion between the 2SR and 5SR groups. In addition, the findings demonstrate no statistically significant differences in SNCV or isometric tetanic TAM contractile force following sciatic nerve transection when performing a 2SR or 5SR PN in the setting of PEG fusion. Successful PEG fusion can be achieved acutely with either a two or five-epineural suture repair in a rat model.
RESUMO
Osteoporosis is the most common chronic metabolic bone disease, and the prevalence of osteoporotic fractures is rapidly increasing with the aging population. While bisphosphonates can reduce bone loss and risk of fracture, these drugs are systemic, rely on long-term use, and patient compliance is low. Recombinant human bone morphogenetic protein-2 (BMP-2) is an FDA-approved protein that can offer a more targeted therapeutic than systemic treatments. DWIVA is a peptide sequence corresponding to the wrist epitope of BMP-2, and DWIVA-functionalized hydrogels feature osteoinductive propertiesin vitro and in vivo. This study reports that self-forming DWIVA-functionalized hydrogels injected into the intramedullary canal of rat femurs induce a local increase in trabecular bone in as little as 2 weeks. Increases in bone volume, trabecular thickness, and trabeculae count from DWIVA-laden hydrogels persist for at least 4 weeks, and the inclusion of mesenchymal stem cells (MSCs) significantly enhances the development of mineralized bone. Histological analysis of decalcified femurs also shows that hydrogel injections containing DWIVA peptide and MSCs stimulate unmineralized bone tissue formation and induce an increased count of osteoblasts and osteoclasts at the injection site after 4 weeks. Overall, the MSC-laden DWIVA peptide-functionalized hydrogels presented rapidly induce targeted bone formation and have the potential to form nascent bone within bones in jeopardy of an osteoporotic fracture such as the femur.
Assuntos
Proteína Morfogenética Óssea 2 , Hidrogéis , Células-Tronco Mesenquimais , Proteína Morfogenética Óssea 2/administração & dosagem , Animais , Células-Tronco Mesenquimais/efeitos dos fármacos , Ratos Sprague-Dawley , Feminino , Transplante de Células-Tronco Mesenquimais/métodos , Fêmur/efeitos dos fármacos , Ratos , Osteogênese/efeitos dos fármacos , Desenvolvimento Ósseo/efeitos dos fármacos , Peptídeos/administração & dosagem , Peptídeos/farmacologiaRESUMO
Staphylococcus aureus (S. aureus) is an opportunistic pathogen that lives on surfaces and skin and can cause serious infections inside the body. Antimicrobial peptides (AMPs) are part of the innate immune system and can eliminate pathogens, including bacteria and viruses, and are a promising alternative to antibiotics. Although studies have reported that AMP-functionalized hydrogels can prevent bacterial adhesion and biofilm formation, AMP dosing and the combined effects of multiple AMPs are not well understood. Here, three AMPs with different antibacterial properties were synthesized and the soluble minimum inhibitory concentrations (MICs) of each AMP against methicillin-susceptible S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) were determined. Hydrogels with immobilized AMPs at their MIC (DD13-RIP 27.5 µM; indolicidin 43.8 µM; P10 120 µM) were effective in preventing MRSA adhesion and biofilm formation. Checkerboard AMP screens identified synergy between indolicidin (3.1 µM) and P10 (12.5 µM) based on soluble fractional inhibitory concentration indices (FICIs) against MRSA, and hydrogels formed with these AMPs at half of their synergistic concentrations (total peptide concentration, 7.8 µM) were highly efficacious in killing MRSA. Mammalian cells cultured atop these hydrogels were highly viable, demonstrating that these AMP hydrogels are biocompatible and selectively eradicate bacteria, based on soluble checkerboard-screening data.
RESUMO
Fiber-reinforcement approaches have been used to replace aligned tissues with engineered constructs after injury or surgical resection, strengthening soft biomaterial scaffolds and replicating anisotropic, load-bearing properties. However, most studies focus on the macroscale aspects of these scaffolds, rarely considering the cell-biomaterial interactions that govern remodeling and extracellular matrix organization toward aligned neo-tissues. As initial cell-biomaterial responses within fiber-reinforced microenvironments likely influence the long-term efficacy of repair and regeneration strategies, here we elucidate the roles of spatial orientation, substrate stiffness, and matrix remodeling on early cell-fiber interactions. Bovine mesenchymal stromal cells (MSCs) were cultured in soft fibrin gels reinforced with a stiff 100 µm polyglycolide-co-caprolactone fiber. Gel stiffness and remodeling capacity were modulated by fibrinogen concentration and aprotinin treatment, respectively. MSCs were imaged at 3 days and evaluated for morphology, mechanoresponsiveness (nuclear Yes-associated protein [YAP] localization), and spatial features including distance and angle deviation from fiber. Within these constructs, morphological conformity decreased as a function of distance from fiber. However, these correlations were weak (R2 = 0.01043 for conformity and R2 = 0.05542 for nuclear YAP localization), illustrating cellular heterogeneity within fiber-enforced microenvironments. To better assess cell-fiber interactions, we applied machine-learning strategies to our heterogeneous dataset of cell-shape and mechanoresponsive parameters. Principal component analysis (PCA) was used to project 23 input parameters (not including distance) onto 5 principal components (PCs), followed by agglomerative hierarchical clustering to classify cells into 3 groups. These clusters exhibited distinct levels of morpho-mechanoresponse (combination of morphological conformity and YAP signaling) and were classified as high response (HR), medium response (MR), and low response (LR) clusters. Cluster distribution varied spatially, with most cells (61%) closest to the fiber (0-75 µm) belonging to the HR cluster, and most cells (55%) furthest from the fiber (225-300 µm) belonging to the LR cluster. Modulation of gel stiffness and fibrin remodeling showed differential effects for HR cells, with stiffness influencing the level of mechanoresponse and remodeling capacity influencing the location of responding cells. Together, these novel findings demonstrate early trends in cellular patterning of the fiber-reinforced microenvironment, showing how spatial orientation, substrate biophysical properties, and matrix remodeling may guide the amplitude and localization of cellular mechanoresponses. These trends may guide approaches to optimize the design of microscale scaffold architecture and substrate properties for enhancing organized tissue assembly at the macroscale.
RESUMO
Background: Polyethylene glycol (PEG) is a synthetic, biodegradable, and hyperosmotic material promising in the treatment of acute peripheral nerve injuries. Our team set out to investigate the impact of fibrin glue upon PEG fusion in a rat model. Methods: Eighteen rats underwent sciatic nerve transection and PEG fusion. Electrophysiologic testing was performed to measure nerve function and distal muscle twitch. Fibrin glue was applied and testing repeated. Due to preliminary findings, fibrin glue was applied to an uncut nerve in five rodents and testing was conducted before and after glue application. Mann-Whitney U tests were used to compare median values between outcome measures. A Shapiro-Wilk test was used to determine normality of data for each comparison, significance set at a P value less than 0.05. Results: PEG fusion was confirmed in 13 nerves with no significant change in amplitude (P = 0.054), latency (P = 0.114), or conduction velocity (P = 0.114). Stimulation of nerves following PEG fusion produced distal muscle contraction in 100% of nerves. Following application of fibrin glue, there was a significant reduction in latency (P = 0.023), amplitude (P < 0.001), and conduction velocity (P = 0.023). Stimulation of the nerve after application of fibrin glue did not produce distal muscle twitch. Five uncut nerves with fibrin glue application blocked distal muscle contraction following stimulation. Conclusions: Our data suggest that fibrin glue alters the nerve's function. The immediate confirmation of PEG fusion via distal muscle twitch is blocked with application fibrin glue in this experimental model. Survival and functional outcome studies are necessary to understand if this has implications on the long-term functional outcomes.
RESUMO
Hydrogels are a class of soft biomaterials and the material of choice for a myriad of biomedical applications due to their biocompatibility and highly tunable mechanical and biochemical properties. Specifically, light-mediated thiol-norbornene click reactions between norbornene-modified macromers and di-thiolated crosslinkers can be used to form base hydrogels amenable to spatial biochemical modifications via subsequent light reactions between pendant norbornenes in the hydrogel network and thiolated peptides. Macromers derived from natural sources (e.g., hyaluronic acid, gelatin, alginate) can cause off-target cell signaling, and this has motivated the use of synthetic macromers such as poly(ethylene glycol) (PEG). In this study, commercially available 8-arm norbornene-modified PEG (PEG-Nor) macromers were reacted with di-thiolated crosslinkers (dithiothreitol, DTT) to form synthetic hydrogels. By varying the PEG-Nor weight percent or DTT concentration, hydrogels with a stiffness range of 3.3 kPa-31.3 kPa were formed. Pendant norbornene groups in these hydrogels were used for secondary reactions to either increase hydrogel stiffness (by reacting with DTT) or to tether mono-thiolated peptides to the hydrogel network. Peptide functionalization has no effect on bulk hydrogel mechanics, and this confirms that mechanical and biochemical signals can be independently controlled. Using photomasks, thiolated peptides can also be photopatterned onto base hydrogels, and mesenchymal stem cells (MSCs) attach and spread on RGD-functionalized PEG-Nor hydrogels. MSCs encapsulated in PEG-Nor hydrogels are also highly viable, demonstrating the ability of this platform to form biocompatible hydrogels for 2D and 3D cell culture with user-defined mechanical and biochemical properties.
RESUMO
A major aim in the field of synthetic biology is developing tools capable of responding to user-defined inputs by activating therapeutically relevant cellular functions. Gene transcription and regulation in response to external stimuli are some of the most powerful and versatile of these cellular functions being explored. Motivated by the success of chimeric antigen receptor (CAR) T-cell therapies, transmembrane receptor-based platforms have been embraced for their ability to sense extracellular ligands and to subsequently activate intracellular signal transduction. The integration of transmembrane receptors with transcriptional activation platforms has not yet achieved its full potential. Transient expression of plasmid DNA is often used to explore gene regulation platforms in vitro. However, applications capable of targeting therapeutically relevant endogenous or stably integrated genes are more clinically relevant. Gene regulation may allow for engineered cells to traffic into tissues of interest and secrete functional proteins into the extracellular space or to differentiate into functional cells. Transmembrane receptors that regulate transcription have the potential to revolutionize cell therapies in a myriad of applications, including cancer treatment and regenerative medicine. In this review, we will examine current engineering approaches to control transcription in mammalian cells with an emphasis on systems that can be selectively activated in response to extracellular signals. We will also speculate on the potential therapeutic applications of these technologies and examine promising approaches to expand their capabilities and tighten the control of gene regulation in cellular therapies.
Assuntos
Terapia Baseada em Transplante de Células e Tecidos , Regulação da Expressão Gênica , Animais , Transdução de Sinais , Ligantes , MamíferosRESUMO
Although photopolymerization reactions are commonly used to form hydrogels, these strategies rely on light and may not be suitable for delivering therapeutics in a minimally invasive manner. Here, hyaluronic acid (HA) macromers are modified with norbornene (Nor) or tetrazine (Tet) and upon mixing click into covalently crosslinked Nor-Tet hydrogels via a Diels-Alder reaction. By incorporating a high degree of Nor and Tet substitution, Nor-Tet hydrogels with a broad range in elastic moduli (5 to 30 kPa) and fast gelation times (1 to 5 min) are achieved. By pre-coupling methacrylated HANor macromers with thiolated peptides via a Michael addition reaction, Nor-Tet hydrogels are peptide-functionalized without affecting their physical properties. Mesenchymal stem cells (MSCs) on RGD-functionalized Nor-Tet hydrogels adhere and exhibit stiffness-dependent differences in matrix mechanosensing. Fluid properties of Nor-Tet hydrogel solutions allow for injections through narrow syringe needles and can locally deliver viable cells and peptides. Substituting HA with enzymatically degradable gelatin also results in cell-responsive Nor-Tet hydrogels, and MSCs encapsulated in Nor-Tet hydrogels preferentially differentiate into adipocytes or osteoblasts, based on 3D cellular spreading regulated by stable (HA) and degradable (gelatin) macromers.
Assuntos
Hidrogéis , Células-Tronco Mesenquimais , Hidrogéis/farmacologia , Hidrogéis/química , Gelatina , Norbornanos/química , Ácido Hialurônico/farmacologia , Ácido Hialurônico/químicaRESUMO
Recent developments in digital light processing (DLP) can advance the structural and biochemical complexity of perfusablein vitromodels of the blood-brain barrier. Here, we describe a strategy to functionalize complex, DLP-printed vascular models with multiple peptide motifs in a single hydrogel. Different peptides can be clicked into the walls of distinct topologies, or the peptide motifs lining channel walls can differ from those in the bulk of the hydrogel. The flexibility of this approach is used to both characterize the effects of various bioactive domains on endothelial coverage and tight junction formation, in addition to facilitating astrocyte attachment in the hydrogel surrounding the endothelialized vessel to mimic endothelial-astrocyte interaction. Peptides derived from proteins mediating cell-extracellular matrix (e.g. RGD and IKVAV) and cell-cell (e.g. HAVDI) adhesions are used to mediate endothelial cell attachment and coverage. HAVDI and IKVAV-lined channels exhibit significantly greater endothelialization and increased zonula-occluden-1 (ZO-1) localization to cell-cell junctions of endothelial cells, indicative of tight junction formation. RGD is then used in the bulk hydrogel to create an endothelial-astrocyte co-culture model of the blood-brain barrier that overcomes the limitations of previous platforms incapable of complex topology or tunable bioactive domains. This approach yields an adjustable, biofabricated platform to interrogate the effects of cell-matrix interaction on blood-brain barrier mechanobiology.
Assuntos
Barreira Hematoencefálica , Células Endoteliais , Barreira Hematoencefálica/metabolismo , Peptídeos/química , Hidrogéis/química , Impressão Tridimensional , OligopeptídeosRESUMO
Cells encapsulated in 3D hydrogels exhibit differences in cellular mechanosensing based on their ability to remodel their surrounding hydrogel environment. Although cells in tissue interfaces feature a range of mechanosensitive states, it is challenging to recreate this in 3D biomaterials. Human mesenchymal stem cells (MSCs) encapsulated in methacrylated gelatin (GelMe) hydrogels remodel their local hydrogel environment in a time-dependent manner, with a significant increase in cell volume and nuclear Yes-associated protein (YAP) localization between 3 and 5 days in culture. A finite element analysis model of compression showed spatial differences in hydrogel stress of compressed GelMe hydrogels, and MSC-laden GelMe hydrogels were compressed (0-50%) for 3 days to evaluate the role of spatial differences in hydrogel stress on 3D cellular mechanosensing. MSCs in the edge (high stress) were significantly larger, less round, and had increased nuclear YAP in comparison to MSCs in the center (low stress) of 25% compressed GelMe hydrogels. At 50% compression, GelMe hydrogels were under high stress throughout, and this resulted in a consistent increase in MSC volume and nuclear YAP across the entire hydrogel. To recreate heterogeneous mechanical signals present in tissue interfaces, porous polycaprolactone (PCL) scaffolds were perfused with an MSC-laden GelMe hydrogel solution. MSCs in different pore diameter (~280-430 µm) constructs showed an increased range in morphology and nuclear YAP with increasing pore size. Hydrogel stress influences MSC mechanosensing, and porous scaffold-hydrogel composites that expose MSCs to diverse mechanical signals are a unique biomaterial for studying and designing tissue interfaces.
RESUMO
Introduction: Plant tissues are plentiful, diverse, and due to convergent evolution are structurally similar to many animal tissues. Decellularized plant tissues feature microtopographies that resemble cancellous bone (porous parenchyma) and skeletal muscle (fibrous vascular bundles). However, the use of plant tissues as an inexpensive and abundant biomaterial for controlling stem cell behavior has not been widely explored. Methods: Celery plant tissues were cut cross-sectionally (porous parenchyma) or longitudinally (fibrous vascular bundles) and decellularized. Human mesenchymal stem cells (MSCs) were then cultured atop plant tissues and confocal imaging of single cells was used to evaluate the early effects of microtopography on MSC adhesion, morphology, cytoskeletal alignment, Yes-associated protein (YAP) signaling, and downstream lineage commitment to osteogenic or myogenic phenotypes. Results: Microtopography was conserved post plant tissue decellularization and MSCs attached and proliferated on plant tissues. MSCs cultured on porous parenchyma spread isotropically along the periphery of plant tissue pores. In contrast, MSCs cultured on vascular bundles spread anisotropically and aligned in the direction of fibrous vascular bundles. Differences in microtopography also influenced MSC nuclear YAP localization and actin anisotropy, with higher values observed on fibrous tissues. When exposed to osteogenic or myogenic culture medium, MSCs on porous parenchyma had a higher percentage of cells stain positive for bone biomarker alkaline phosphatase, whereas myoblast determination protein 1 (MyoD) was significantly upregulated for MSCs on fibrous vascular bundles. Conclusions: Together, these results show that plant tissues are an abundant biomaterial with defined microarchitecture that can reproducibly regulate MSC morphology, mechanosensing, and differentiation. Supplementary Information: The online version of this article contains supplementary material available 10.1007/s12195-022-00737-9.
RESUMO
The clinical translation of mesenchymal stem cells (MSCs) is limited by population heterogeneity and inconsistent responses to engineered signals. Specifically, the extent in which MSCs respond to mechanical cues varies significantly across MSC lines. Although induced pluripotent stem cells (iPSCs) have recently emerged as a novel cell source for creating highly homogeneous MSC (iMSC) lines, cellular mechanosensing of iMSCs on engineered materials with defined mechanics is not well understood. Here, we tested the mechanosensing properties of three human iMSC lines derived from iPSCs generated using a fully automated platform. Stiffness-driven changes in morphology were comparable between MSCs and iMSCs cultured atop hydrogels of different stiffness. However, contrary to tissue derived MSCs, no significant changes in iMSC morphology were observed between iMSC lines atop different stiffness hydrogels, demonstrating a consistent response to mechanical signals. Further, stiffness-driven changes in mechanosensitive biomarkers were more pronounced in iMSCs than MSCs, which shows that iMSCs are more adaptive and responsive to mechanical cues than MSCs. This study reports that iMSCs are a promising stem cell source for basic and applied research due to their homogeneity and high sensitivity to engineered mechanical signals.
Assuntos
Células-Tronco Pluripotentes Induzidas , Células-Tronco Mesenquimais , Biomarcadores/metabolismo , Diferenciação Celular , Humanos , Hidrogéis/metabolismoRESUMO
Osteoporosis is a disease characterized by a decrease in bone mineral density, thereby increasing the risk of sustaining a fragility fracture. Most medical therapies are systemic and do not restore bone in areas of need, leading to undesirable side effects. Injectable hydrogels can locally deliver therapeutics with spatial precision, and this study reports the development of an injectable hydrogel containing a peptide mimic of bone morphogenetic protein-2 (BMP-2). To create injectable hydrogels, hyaluronic acid was modified with norbornene (HANor) or tetrazine (HATet) which upon mixing click into covalently crosslinked Nor-Tet hydrogels. By modifying HANor macromers with methacrylates (Me), thiolated BMP-2 mimetic peptides were immobilized to HANor via a Michael addition reaction, and coupling was confirmed with 1H NMR spectroscopy. BMP-2 peptides presented in soluble and immobilized form increased alkaline phosphatase (ALP) expression in MSCs cultured on 2D and encapsulated in 3D Nor-Tet hydrogels. Injection of bioactive Nor-Tet hydrogels into hollow intramedullary canals of Lewis rat femurs showed a local increase in trabecular bone density as determined by micro-CT imaging. The presented work shows that injectable hydrogels with immobilized BMP-2 peptides are a promising biomaterial for the local regeneration of bone tissue and for the potential local treatment of osteoporosis.
RESUMO
The extracellular matrix (ECM) of bone and cartilage presents stem cells with a dynamic and complex array of biochemical and biomechanical signals that regulate proliferation and differentiation into bone and cartilage tissue-producing cells. Due to the multitude of signals present in this ECM, it is challenging to develop biomaterials that accurately recapitulate bone and cartilage tissues, thereby limiting the ability to present cells with multiple factors for enhanced biomaterial-induced osteogenic and chondrogenic differentiation. Conventional techniques to evaluate stem cell responses to engineered materials are laborious and time-consuming, and high-throughput screening techniques can address these limitations. Our review overviews developmental environments and signals present in bone and cartilage ECM, with a focus on applying hydrogel-based screening approaches to identify biomaterial environments that promote stem cell-mediated bone and cartilage tissue regeneration.
Assuntos
Osso e Ossos/fisiologia , Cartilagem/fisiologia , Hidrogéis/farmacologia , Regeneração/efeitos dos fármacos , Animais , Osso e Ossos/efeitos dos fármacos , Cartilagem/efeitos dos fármacos , Comunicação Celular/efeitos dos fármacos , Matriz Extracelular/efeitos dos fármacos , Matriz Extracelular/metabolismo , HumanosRESUMO
Mechanical cues induce a variety of downstream effects on cells, including the regulation of stem cell behavior. Cell fate is typically characterized on biomaterial substrates where mechanical and chemical properties can be precisely tuned; however, most of these substrates do not recapitulate the biological complexity of the extracellular matrix (ECM). Here, hydrogels are engineered for mechanobiological studies using two major components of the ECM: hyaluronic acid (HA) and fibronectin (FN). Rather than typical surface chemisorption of FN to substrates, the system contains full-length FN covalently crosslinked to HA throughout the hydrogel. The control over the mechanical properties of the hydrogel independent of the concentration of FN and the ability to culture viable cells either on top or encapsulated within the hydrogels are shown. Interestingly, human mesenchymal stem cells (MSCs) experience an increase in nuclear translocation of the yes-associated protein (YAP) to the nucleus when cultured on (2D) substrates with increasing amounts of FN while maintaining constant hydrogel stiffness. However, this FN dependence on nuclear YAP translocation is not observed for MSCs encapsulated in (3D) hydrogels. This work develops complex hydrogels that recapitulate features of the ECM for the control of stem cells in both 2D and 3D environments.