Blood Blister-Like Aneurysms of the Internal Carotid Artery.

Internal carotid artery blood blister-like aneurysms are challenging lesions that arise from the artery trunk at non-branching sites. They have been recognized since 1969 and are distinct from typical saccular aneurysms. Usually, these aneurysms are broad-based, with no clearly identifiable neck and have extremely friable and fragile walls, thus with a great propensity to cause subarachnoid hemorrhage and to rupture during treatment. Apparently, blister-like aneurysms are formed through an acquired defect of the inner layers (tunica intima and media) of the internal carotid artery wall, probably due to hemodynamic stress in the carotid siphon.Several surgical and endovascular techniques have been described for the treatment of these aneurysms, however, there is still no consensus on the best technique or method, exposing how challenging the treatment of internal carotid artery blister-like aneurysms is, for both neurosurgeons and neurointerventionists. In this chapter, we review the main aspects of the pathogenesis, diagnosis, and therapeutics and report our experience in the microsurgical treatment of these formidable lesions.

Spina bifida folate fortification in Brazil, update 2022: a cross-sectional study.

INTRODUCTION: Despite improving maternal-child indicators in Brazil, congenital malformations are still the second cause of mortality in the first years of life. This work aims to compare statistical data before and after flour fortification with folic acid (FA) in Brazil. METHODS: A cross-sectional Brazilian-population-based study compares the spina bifida (SB) rates pre- and post-fortification of the flour with folate. Data collected from the public database of the Live Birth Information System (SINASC/SUS) was performed. The period 1999-2004 (pre-fortification) was compared with 2005-2010 (post-maize and wheat fortification with FA), and another analysis comparing 2005-2010 and 2011-2020 (cassava flour fortification) was performed. The estimator was the prevalence ratio (PRR); the confidence interval selected was 95%. We used a random effects analysis model and inverse variance. RESULTS: The review showed a tendency to decrease the PRR after flour fortification; however, there is no statistical significance between studies. DATASUS data analysis comparing 5 years before and 5 years after mandatory maize and wheat flour fortification demonstrated a rate ratio of 1.05 (95% CI 0.99-1.1; p = 0.075). Furthermore, comparing 10 years after additional cassava flour folate fortification, the rate ratio increased to 1.4 (95% CI 1.34-1.45; p < 0.01). CONCLUSION: This study demonstrated an increase in SB after FA fortification. Possible explanations rely on national registry improvement, not fortified staple food, or further unidentified causes. Moreover, suggestions can be made for creating a mandatory registry for malformations, inspecting the concentrations of FA in the flour, and fortifying all food.

Comparison of Manual (2D) and Digital (3D) Methods in the Assessment of Simulated Facial Edema.

BACKGROUND: An edema assessment following dental surgeries is essential to improving the dental surgeon's technique and, consequentially, patient comfort. PURPOSE: Two-dimensional (2D) methods are limited in analyzing 3-dimensional (3D) surfaces. Currently, 3D methods are used to investigate postoperative swelling. However, there are no studies that directly compare 2D and 3D methods. The goal of this study is to directly compare 2D and 3D methods used in the assessment of postoperative edema. STUDY DESIGN AND SAMPLE: The investigators implemented a prospective, cross-sectional study with each subject serving as its own control. The sample was composed of dental student volunteers without facial deformities. PREDICTOR VARIABLE: The predictor variable is the method used to measure edema. After simulating edema, manual (2D) and digital (3D) techniques were used to measure edema. The manual method used direct facial perimeter measurements. The two digital methods were photogrammetry using a smartphone (iPhone 11, Apple Inc, Cupertino, California), and facial scanning with a smartphone application (Bellus3D FaceApp, Bellus3D Inc, Campbell, California) [3D measurements] MAIN OUTCOME VARIABLE: The coefficient of variation (CV) (CV = standard deviation /mean) was used to assess homogeneity of edema measurements. ANALYSIS: The Shapiro-Wilk and equal variance tests were applied to assess data homogeneity. Next, one-way analysis of variance was performed, followed by a correlation analysis. Finally, the data were submitted to Tukey's test. The statistical significance threshold was set at 5% (P < .05). RESULTS: The sample was composed of 20 subjects aged 18-38 years. The CV showed higher values using the manual (2D) method (47%; 4.88% ± 2.99), compared with the photogrammetry method (18%; 8.55 mm ± 1.52) and the smartphone application (21%; 8.97 mm ± 1.93). A statistically significant difference was observed between the manual method values and those of the other two groups (P < .001). There was no difference between the facial scanning and photogrammetry groups (3D methods) (P = .778) CONCLUSION AND RELEVANCE: Both digital measuring methods (3D) demonstrated greater homogeneity than the manual method in analyzing facial distortions caused by the same swelling simulation. Therefore, it can be affirmed that digital methods may be more reliable that manual methods for assessing facial edema.

Accuracy of Manual and Virtual Predictive Tracings in Patients Submitted to Orthognathic Surgery.

Cephalometric tracing done manually was considered gold standard for the cephalometric analysis in the last decades. The digital radiographs began to be commonly used in order to make that in a digital way. The objective was to define the accuracy of the predictive and final cephalometric tracings performed manually and virtually. The authors selected 20 patients submitted to bimaxillary orthognathic surgery. The data were collected from lateral cephalometric radiographs, in the preoperative and postoperative periods. The interest were: points, angles (Sella-Nasion to A point angle; Sella-Nasion to B point angle; Frankfurt plane to Mandibular plane angle; Frankfurt plane to occlusal plane angle; Upper and lower central incisors long axes angle; Incisor to Mandibular plane angle; Upper incisor axis to Sella-Nasion plane angle) distances (Co-A; Co-Gn). Data were submitted to the Shapiro-Wilk, analysis of variance, and Kruskal-Wallis tests. The measurement differences were compared using a t test. Descriptive statistics were performed in Excel 2013 and SPSS software, P <0.05 being considered significant. No statistically significant difference was found between the mean values predictive and postoperative of the angles and distances within the manual and digital groups. When comparing the means of the differences between the predictive values and the final values, only the 1:1 angle presented a statistically significant difference, indicating a greater accuracy of the digital predictive tracing for this measure. In conclusion, both methods for obtaining predictive tracings are accurate, which shows that clinical results can be successfully simulated by the most accessible technique.

An alternative approach for the surgical correction of unilateral crossbite.

This case report aims to describe a modified surgically assisted rapid palatal expansion technique to treat an asymmetrical posterior crossbite with no mandibular shift without causing an interincisal diastema. A clinical patient with an asymmetrical crossbite, large tooth-size-arch length, and Bolton discrepancy is used to illustrate the modified technique. Instead of traditional osteotomies, in this technique, the osteotomy is done between the maxillary right canine and lateral incisor (connecting the piriform aperture to the alveolar process) along with a unilateral LeFort I osteotomy. The expansion forces are produced by the activation of a conventional hyrax appliance. The skeletal unilateral crossbite was corrected without major changes to the opposite side and without causing an anesthetic diastema between the maxillary central incisors. A mandibular incisor extraction produced the space needed to treat the tooth size-arch length and corrected the Bolton discrepancy. This allowed a successful treatment of the problems initially presented by the patient.

The Interplay of Raloxifene and Sonochemical Bio-Oss in Early Maxillary Sinus Bone Regeneration: A Histological and Immunohistochemical Analysis in Rabbits.

The study aimed to assess the efficacy of using Raloxifene with ultrasonic processing to enhance Bio-Oss®, a bone graft substitute, for maxillary sinus bone height reconstruction. A total of 24 rabbit maxillary sinuses were distributed into three groups, each receiving different treatments: Bio-Oss® only, sonicated Bio-Oss, and sonicated Bio-Oss® with Raloxifene. Surgical procedures and subsequent histomorphometric and immunohistochemistry analyses were conducted to evaluate the bone formation, connective tissue, and remaining biomaterial, as well as the osteoblastic differentiation and maturation of collagen fibers. Results indicated that the sonicated Bio-Oss® and Bio-Oss® groups showed similar histological behavior and bone formation, but the Raloxifene group displayed inflammatory infiltrate, low bone formation, and disorganized connective tissue. The statistical analysis confirmed significant differences between the groups in terms of bone formation, connective tissue, and remaining biomaterial. In conclusion, the study found that while sonicated Bio-Oss® performed comparably to Bio-Oss® alone, the addition of Raloxifene led to an unexpected delay in bone repair. The findings stress the importance of histological evaluation for accurate bone repair assessment and the necessity for further investigation into the local application of Raloxifene. Future research may focus on optimizing bone substitutes with growth factors to improve bone repair.

Are the popliteofibular ligament, the arcuate ligament, and the fibular insertion of the popliteus muscle the same structure? An anatomic and terminological study.

Lesions in the lateral region of the knee can result in severe disability due to instability and articular degeneration. The structures in the posterolateral side of the knee function as a unit contributes to rotation and translation limits. Anatomical descriptions of the lateral corner of the knee are incomplete and contradictory. This study aims to verify, through anatomical dissections in cadavers, if the fibular insertion of the popliteus muscle, the arcuate ligament, and the popliteofibular ligament are distinct or the same structure with different terminology and descriptions in the literature. Fifteen cadavers were dissected. Photographs were taken, and in some cases, a video was recorded. Also, the correct terminology for ligament and insertion was searched. The dissections allowed the popliteus muscle to be identified proximally in the lateral femoral condyle, in the fibula head's posterolateral region, and through a meniscocapsular insertion. In none of the anatomy books reviewed, this fibular insertion of the popliteus muscle is mentioned. However, our findings and data from other experimental studies provide evidence of its presence. The aponeurotic portion of the arcuate ligament is distinguished from the short lateral ligament, which is the fibular insertion of the popliteus muscle with its tendinous attachment. Therefore, the term popliteofibular ligament should be abandoned based on the anatomic terminology, and the term "fibular insertion of the popliteus muscle" should be used instead.

Initial experience in the microsurgical treatment of ruptured brain aneurysms in the endovascular era: characteristics and safety of the learning curve in the first 300 consecutively treated patients.

PURPOSE: Currently, there is an increasing tendency to refer only complex aneurysms for microsurgery. The formation of new neurosurgeons dedicated to open vascular neurosurgery becomes challenging in a situation in which complex aneurysms must be dealt with early in the career, raising questions about the safety of the learning curve. METHODS: We analyzed the characteristics and surgical results of the first 300 consecutively treated patients after subarachnoid hemorrhage by a single neurosurgeon. The incidence of surgical complications and clinical outcomes during the learning curve were analyzed, looking for critical periods regarding patient safety. Microsurgical operative times were also studied. RESULTS: A high frequency of wide-necked aneurysms was observed (70.3%), and, as a result, large (> 10 mm), MCA and paraclinoid aneurysms were overrepresented. A statistically significant correlation between surgical experience and clinical outcomes was observed, with progressive surgical experience resulting in a lower incidence of unfavorable outcomes. We also observed a higher frequency of major surgical complications, unfavorable clinical outcomes, and lower complete occlusion rates among the first 40 patients. Microsurgical operative times progressively and significantly decreased during the learning curve. CONCLUSIONS: We observed a high prevalence of wide-necked aneurysms. Young neurosurgeons must be trained and prepared to deal with these aneurysms early in their careers. Although we observed a decrease in unfavorable results with cumulative surgical experience, the first 40 cases were associated with higher rates of major surgical complications, worse clinical outcomes, and lower complete occlusion rates, indicating that this period may be more critical to patient safety.

Sverzut Nasotracheal Tube Support Device: Ergonomic Management and Airway Safety in Cervicomaxillofacial Surgery.

Nasotracheal intubation is the preferred route for general anesthesia maintenance in patients undergoing maxillofacial surgery or dental procedures. However, compression of the tracheal tube may cause superficial necrosis of the nasal wing and deformation of the external nose. Thus, proper fixation of the tracheal tube during nasotracheal intubation is important for the patient's safety as well as that of the medical staff. Recently, a nasotracheal tube support device has been developed; thus, in this study, the aim was to present and describe the Sverzut nasotracheal tube support device and discuss the advantages of its use during nasal intubation in cervicomaxillofacial surgery. Findings from this study show that the Sverzut nasotracheal tube support device can contribute to the stabilization of the nasotracheal tube and all its connectors, aiding in the maintenance of the airway patency and minimizing the complications related to this type of intubation.

Which Histometric Analysis Approach Is More Reliable for Assessing Histological Bone Tissue Samples?

This study aims to evaluate the grid of Merz and ImageJ methods for histometric quantification, verifying which is more reliable and defining which is most suitable based on the time required to perform. Thirty histological samples of maxillary sinuses grafted with xenografts were evaluated using an optical light microscope attached to an image capture camera and connected to a microcomputer. The images were digitalized and recorded as a TIFF image, and the new bone formation was evaluated using the grid of Merz and ImageJ. The Bland-Altman analysis was used to identify the agreement between the methods and determine suitable future research options. The timing of the quantification was also performed to identify a possible advantage. The mean value for the quantification analysis timing for the grid of Merz was 194.9 ± 72.0 s and for ImageJ was 871.7 ± 264.4, with statistical significance between the groups (p = 0.0001). The Bland-Altman analysis demonstrated a concordance between the methods, due to the bias being next to the maximum concordance (-1.25) in addition to the graphic showing the scattering points next to the mean of differences and inside of limits of agreement. Thus, it was demonstrated that the grid of Merz presents reliable outcomes and advantages over the ImageJ methodology regarding the time spent to contour the areas of interest.

Early Pediatric Multiple Facial Fractures Treatment With Resorbable Fixation.

ABSTRACT: The facial skeleton in pediatric patients can undergo several changes during development, according to their growth zones and the traumas they suffer. Thus, some of these traumas can lead to multiple complications if not treated properly. Epidemiology can vary according to the social, cultural, and environmental aspects of each individual. Therefore, each case must be treated individually, and it is important to consider age-specific aspects, such as the high osteogenic potential, which leads to faster bone healing. The use of resorbable fixation materials in facial fractures of pediatric patients is widespread, with good acceptance and great advantages over conventional titanium materials, mainly for the elimination of a second surgery to remove the materials. The present study aims to report a series of clinical cases of infants, who suffered trauma and evolved with fractures in the facial bones. Surgical treatment was instituted to reduce and fix fractures, using the resorbable system. Patients are followed up with periodic outpatient follow-up visits and have a good case evolution.

Management of Complications Related to Removal of the Buccal Fat Pad.

ABSTRACT: Removal of the buccal fat pad (BFP) is an important topic of discussion in the literature. Several studies have reported improvements in facial esthetics as a result of this technique. The BFP is close to vital structures, such as the facial nerve, parotid duct, and vessels. Injuries related to these structures may occur during the surgical procedure. This manuscript aimed to report and discuss 2 clinical cases of the complications after removal of the BFP. Besides the case presentation, a comprehensive review of the literature was also provided. The reported cases were 2 patients aged 31 and 38 years who were attended by the oral and maxillofacial surgery teams after a complication in the BFP surgery. The first case involved swelling due to Stensen's duct injury, and the second involved uncontrolled bleeding from the internal maxillary artery. Removal of the BFP must have precise indications. Complications may occur during or after surgery; hence, anatomical knowledge is fundamental to appropriate patient management.

Evaluation of Alveolar Bone Quality: Correlation Between Histomorphometric Analysis and Lekholm and Zarb Classification.

OBJECTIVES: This study evaluated the bone quality of the maxilla and mandible by using the classification proposed by Lekholm and Zarb (L & Z) and histomorphometry. METHODS: Sixty edentulous areas were evaluated. The classification by L & Z was obtained through the evaluation of periapical and panoramic radiographs associated with the surgeon's tactile perception during milling and implant installation. Before implant installation, bone biopsies of standardized sizes were performed for histological evaluation. RESULTS: Type III bone quality was more frequent in the posterior (73.33%) and anterior (73.33%) maxilla, whereas type II bone quality was more frequent in the posterior (53.33%) and anterior (60.00%) mandible. Through histometry, statistical difference was observed for the amount of bone tissue of the posterior region of the maxilla in relation to the anterior and posterior regions of the mandible (P ≤ 0.043). However, there was no difference in osteocyte counts between alveolar regions (P = 0.2946). In the female gender, the age showed a low positive correlation with the L & Z classification (rho = 0.398; P = 0.006) and in the male gender, a moderate negative correlation was observed (rho = -0.650, P = 0.016). CONCLUSIONS: Both methods detected differences in the bone quality of the alveolar regions of the maxilla/mandible and that the classification by L & Z is a reliable method, since it was consistent with histomorphometry, considered the "gold standard" method for the evaluation of bone quality and greater bone density was observed in older men.

Algorithm for Treatment of Supernumerary Nasal Tooth.

ABSTRACT: The presence of a tooth in the nasal cavity is a rare condition. There is an even more rare association, which is the presence with the mineral's deposition and formation of rhinoliths. This report shows a case of rare nasal tooth associated with rhinolithiasis and describes its surgical treatment based on an algorithm. The diagnosis was made by endoscopy with the aid of computed tomography, followed by surgical endoscopy excision. The algorithm and the proposed treatment was successful in its execution and the patient presents no complaints or complications at 3 years after surgery.

Harpoon Suicide Attempt: A Dramatic Experience of the Multidisciplinary Approach.

ABSTRACT: Craniofacial harpoon injuries are extremely rare, especially when caused by attempted suicide. The approach to surgical removal becomes dependent on the characteristics of the device, with or without barbs on the spear, and its path, which presents with significant changes between accidents and suicide attempts. This report presents the successful treatment carried out in a dramatic case of harpoon suicide attempt. The approaches to complete and cautious removal of the spear from the occipital region, reconstruction of the orbital cavity, evisceration of the left eyeball due to amaurosis and psychiatric follow-up were successful, which allowed the restoration of the patient's physical and mental health.

Augmented reality and physical hybrid model simulation for preoperative planning of metopic craniosynostosis surgery.

OBJECTIVE: The main objective of neurosurgery is to establish safe and reliable surgical techniques. Medical technology has advanced during the 21st century, enabling the development of increasingly sophisticated tools for preoperative study that can be used by surgeons before performing surgery on an actual patient. Laser-printed models are a robust tool for improving surgical performance, planning an operative approach, and developing the skills and strategy to deal with uncommon and high-risk intraoperative difficulties. Practice with these models enhances the surgeon's understanding of 3D anatomy but has some limitations with regard to tactile perception. In this study, the authors aimed to develop a preoperative planning method that combines a hybrid model with augmented reality (AR) to enhance preparation for and planning of a specific surgical procedure, correction of metopic craniosynostosis, also known as trigonocephaly. METHODS: With the use of imaging data of an actual case patient who underwent surgical correction of metopic craniosynostosis, a physical hybrid model (for hands-on applications) and an AR app for a mobile device were created. The hybrid customized model was developed by using analysis of diagnostic CT imaging of a case patient with metopic craniosynostosis. Created from many different types of silicone, the physical model simulates anatomical conditions, allowing a multidisciplinary team to deal with different situations and to precisely determine the appropriate surgical approach. A real-time AR interface with the physical model was developed by using an AR app that enhances the anatomic aspects of the patient's skull. This method was used by 38 experienced surgeons (craniofacial plastic surgeons and neurosurgeons), who then responded to a questionnaire that evaluated the realism and utility of the hybrid AR simulation used in this method as a beneficial educational tool for teaching and preoperative planning in performing surgical metopic craniosynostosis correction. RESULTS: The authors developed a practice model for planning the surgical cranial remodeling used in the correction of metopic craniosynostosis. In the hybrid AR model, all aspects of the surgical procedure previously performed on the case patient were simulated: subcutaneous and subperiosteal dissection, skin incision, and skull remodeling with absorbable miniplates. The pre- and postoperative procedures were also carried out, which emphasizes the role of the AR app in the hybrid model. On the basis of the questionnaire, the hybrid AR tool was approved by the senior surgery team and considered adequate for educational purposes. Statistical analysis of the questionnaire responses also highlighted the potential for the use of the hybrid model in future applications. CONCLUSIONS: This new preoperative platform that combines physical and virtual models may represent an important method to improve multidisciplinary discussion in addition to being a powerful teaching tool. The hybrid model associated with the AR app provided an effective training environment, and it enhanced the teaching of surgical anatomy and operative strategies in a challenging neurosurgical procedure.

Orbital Trapdoor Facture in Child: More Predictable Outcomes and Less Consequences.

Orbital trapdoor fractures are characterized by tissue entrapment between the fractured bone fragment and the remnant of the orbital floor. This entrapment can result in immediate local and systemic complications and poor outcomes when approached late. This article presents the case of an orbital floor fracture in a child with dystopia, pain, edema and entrapment of the inferior rectus muscle and consequent limitation of ocular motility. The strategy proposed in the early approach to orbital floor reconstruction and release of incarcerated tissue allowed the patient to achieve satisfactory results without morbidity, as compared to the outcomes of corrective sequel surgery.

Lip Synechia Resulting From Toxic Epidermal Necrolysis: A Rare Condition.

Toxic epidermal necrolyses represent a severe epidermolytic reaction characterized by cutaneous erythema and target lesions affecting >30% of the body surface, skin, and mucous membranes. Ulcerative lesions on the labial mucosa may evolve during healing, resulting in rare complications, such as lip adhesions. This report shows the successful treatment of a lip synechia resulting from the healing of mucosal lesions in a patient with toxic epidermal necrolysis caused by the use of Lamotrigine and Ibuprofen. Although the treatment of the presented lip synechia was simple, this sequela can be avoided by measures such as hydration, hygiene and lip lubrication.

Maxillofacial Manifestation of a Giant Dimension Cranial Osteoma.

Osteoma is the most frequent benign tumor in the craniomaxillofacial region. The most common initial manifestation is facial pressure or headache.The clinical examination showed increased volume in the right supraorbital region, asymmetry of the orbital contour, exophthalmia, dystopia, proptosis and clinical restraint of ocular movement for supraversion. The lesion measured approximately 4 cm in diameter with irregular contour. Osteotomy was performed with saw surrounding the tumor, with aid of a surgical piezo on the orbital medial wall.The result of histopathological examination was osteoma. The patient is 2.5 years postoperatively and so far without complications.

Strategy for the Treatment of Zygomatic-Coronoid Ankylosis.

Zygomatic-coronoid ankylosis is a rare complication in maxillofacial trauma. Currently, less of 30 cases reported in the literature. The aim of this study was to report a case of zygomatic-coronoid ankylosis after trauma. A 26-year-old male, with zygomatic-coronoid ankylosis after 7 years of facial trauma, was treated by intraoral bilateral coronoidectomy. However, the literature continues to discuss the best approach, intraorally or extraorally. This study observed that the intraoral approach was easily performed and without complications.