A three-years survey of microbial contaminants in industrial hemp inflorescences from two Italian cultivation sites.

BACKGROUND: The use of industrial Cannabis sativa L. for recreational, cosmeceutical, nutraceutical, and medicinal purposes has gained momentum due to its rich content of valuable phytochemicals, such as cannabidiol (CBD) and cannabigerol (CBG). However, there are concerns regarding the risk of microbial contamination in plants grown outside controlled environments. Microbes associated with hemp can be either epiphytes or endophytes and may pose a risk of infectious illness for humans. METHODS: Seven Italian hemp genotypes, including Bernabeo, Carmagnola, Carmaleonte, Codimono, CS, Eletta Campana, and Fibranova, were cultivated in two distinct geographic locations, Catania and Rovigo, for three consecutive years from 2019 to 2021. Total aerobic microbes (TAMC), total combined yeasts/moulds (TYMC), the presence of bile-tolerant Gram-negative bacteria, and the absence of Escherichia coli and Salmonella spp. were evaluated and compared. The main phytocannabinoid content was measured and correlated with microbial contamination. RESULTS: Most samples analyzed in this study did not meet the European Pharmacopoeia microbiological limits. The detection of potential pathogens, such as E. coli and Salmonella spp., in the samples indicates that the use of inflorescences may represent a possible source of infection. Microbial contamination varied among harvesting seasons and production sites, with agroclimatic conditions influencing microbial load and composition. The presence of potentially pathogenic bacteria was less associated with seasonal climate variability and more likely affected by sporadic contamination from external sources. CBD concentration exhibited a negative correlation with bile-tolerant Gram-negative bacteria and total yeasts/moulds levels. Samples with lower CBD content were more contaminated than those with higher CBD levels, suggesting a potential protective effect of this phytochemical on the plant. CONCLUSIONS: The threshing residues (inflorescences, floral bracts, and leaves) of industrial hemp varieties represent a valuable product and a source of beneficial phytochemicals that warrants further exploration. While post-harvest sterilization methods may reduce microbiological risks, they may also degrade heat- and light-sensitive bioactive phytochemicals. The most promising strategy involves implementing best agronomic practices to maintain healthy and uncontaminated cultures. Rigorous monitoring and quality certification protocols are essential to mitigate the microbiological risk associated with the consumption of hemp-derived products.

Hemp Flour Particle Size Affects the Quality and Nutritional Profile of the Enriched Functional Pasta.

The rheological and chemical quality of pasta samples, which were obtained using the durum wheat semolina fortified with the hemp seed solid residue, after oil extraction, sieved at 530 µm (Hemp 1) or 236 µm (Hemp 2) at different percentages of substitution (5%, 7.5%, and 10%, were evaluated. The total polyphenolic content in hemp flour was quantified in the range of 6.38-6.35 mg GAE/g, and free radical scavenging was included in the range from 3.94-3.75 mmol TEAC/100 g in Hemp 1 and Hemp 2, respectively. The phenolic profiles determined by UHPLC-ESI/QTOF-MS showed that cannabisin C, hydroxycinnamic and protocatechuic acids were the most abundant phenolic compounds in both hemp flours. Among the amino acids, isoleucine, glutamine, tyrosine, proline, and lysine were the most abundant in raw materials and pasta samples. Although the hemp seeds were previously subjected to oil extraction, hemp flours retain about 8% of oil, and the fatty acids present in the largest amount were linoleic acid and α-linolenic acid. Characterization of the minerals showed that the concentration of macro and trace elements increased according to fortification percentage. Sensory evaluation and cooking quality indicated that the best performance in terms of process production and consumer acceptance was obtained using Hemp 2 at 7.5%. Hemp supplementation could be a potential option for producing high-quality, nutritionally rich, low-cost pasta with good color and functionality.

Untargeted cannabinomics reveals the chemical differentiation of industrial hemp based on the cultivar and the geographical field location.

Cannabis sativa has long been harvested for industrial applications related to its fibers. Industrial hemp cultivars, a botanical class of Cannabis sativa with a low expression of intoxicating Δ9-tetrahydrocannabinol (Δ9-THC) have been selected for these purposes and scarcely investigated in terms of their content in bioactive compounds. Following the global relaxation in the market of industrial hemp-derived products, research in industrial hemp for pharmaceutical and nutraceutical purposes has surged. In this context, metabolomics-based approaches have proven to fulfill the aim of obtaining comprehensive information on the phytocompound profile of cannabis samples, going beyond the targeted evaluation of the major phytocannabinoids. In the present paper, an HRMS-based metabolomics study was addressed to seven distinct industrial hemp cultivars grown in four experimental fields in Northern, Southern, and Insular Italy. Since the role of minor phytocannabinoids as well as other phytocompounds was found to be critical in discriminating cannabis chemovars and in determining its biological activities, a comprehensive characterization of phytocannabinoids, flavonoids, and phenolic acids was carried out by LC-HRMS and a dedicated data processing workflow following the guidelines of the metabolomics Quality Assurance and Quality Control Consortium. A total of 54 phytocannabinoids, 134 flavonoids, and 77 phenolic acids were annotated, and their role in distinguishing hemp samples based on the geographical field location and cultivar was evaluated by ANOVA-simultaneous component analysis. Finally, a low-level fused model demonstrated the key role of untargeted cannabinomics extended to lesser-studied phytocompound classes for the discrimination of hemp samples.

A Comparative Assessment of Agronomic and Baking Qualities of Modern/Old Varieties and Landraces of Wheat Grown in Calabria (Italy).

The cultivation of wheat has been part of the evolution of human civilisation since ancient times. Wheat breeding has modified some of its characteristics to obtain improved varieties with high production potential that better meet the demands of the bread and pasta industry. Even today, there are still old varieties, landraces, adapted to particular environments. They are still cultivated in some areas because of the interest shown by the market in typical bakery products expressing the cultural heritage of local communities. The aim of this work was to evaluate the bio-agronomic and bakery characteristics of four modern genotypes, one old cultivar and two landraces of wheat typically grown in Calabria (Southern Italy). The experiment was carried out over two years in two different locations, during which the main bio-agronomic and quality traits related to bread making aptitude were detected. A marked difference was found between the landraces and the other genotypes in both agronomic and technological characteristics. Despite the higher protein and gluten content, landraces were found to have a significantly lower gluten index.

Improvement of Fatty Acid Profile in Durum Wheat Breads Supplemented with Portulaca oleracea L. Quality Traits of Purslane-Fortified Bread.

The addition of functional ingredients to breads could have effects on preventing cardiovascular diseases, cancers and inflammation. The incorporation of 0-5-10-15% of three populations of dried purslane flour on the rheological, sensorial and nutritional quality of fortified durum wheat breads were evaluated. The increase in dried purslane (up to 15%) caused an increase in the resistance to the mixture and a consequent reduction in its extensibility. The "panel test" gave a largely positive evaluation in 10% of enrichment. The fatty acids in breads resulted higher with the 5% substitution. Contrary to what has been imagined, the increase in percentage of substitution to 10 and 15% did not lead to an increase in linoleic (omega-3) and α-linolenic (omega-6) acid and probably the cause is in the cooking. The total phenols content and the antioxidant potential, evaluated by ferric reducing antioxidant potential (FRAP) and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays of the enriched breads increased with the percentage of the dry purslane substitution. The enrichment of the durum wheat flour with 5% purslane resulted in a good compromise to obtain good rheological characteristics of loaves and breads with decreased omega-6/omega-3 ratio and good antioxidant properties.

Genomic Regions From an Iranian Landrace Increase Kernel Size in Durum Wheat.

Kernel size and shape are important parameters determining the wheat profitability, being main determinants of yield and its technological quality. In this study, a segregating population of 118 recombinant inbred lines, derived from a cross between the Iranian durum landrace accession "Iran_249" and the Iranian durum cultivar "Zardak", was used to investigate durum wheat kernel morphology factors and their relationships with kernel weight, and to map the corresponding QTLs. A high density genetic map, based on wheat 90k iSelect Infinium SNP assay, comprising 6,195 markers, was developed and used to perform the QTL analysis for kernel length and width, traits related to kernel shape and weight, and heading date, using phenotypic data from three environments. Overall, a total of 31 different QTLs and 9 QTL interactions for kernel size, and 21 different QTLs and 5 QTL interactions for kernel shape were identified. The landrace Iran_249 contributed the allele with positive effect for most of the QTLs related to kernel length and kernel weight suggesting that the landrace might have considerable potential toward enhancing the existing gene pool for grain shape and size traits and for further yield improvement in wheat. The correlation among traits and co-localization of corresponding QTLs permitted to define 11 clusters suggesting causal relationships between simplest kernel size trait, like kernel length and width, and more complex secondary trait, like kernel shape and weight related traits. Lastly, the recent release of the T. durum reference genome sequence allowed to define the physical interval of our QTL/clusters and to hypothesize novel candidate genes inspecting the gene content of the genomic regions associated to target traits.