Liquid Metal Droplet and Graphene Co-Fillers for Electrically Conductive Flexible Composites.

Colloidal liquid metal alloys of gallium, with melting points below room temperature, are potential candidates for creating electrically conductive and flexible composites. However, inclusion of liquid metal micro- and nanodroplets into soft polymeric matrices requires a harsh auxiliary mechanical pressing to rupture the droplets to establish continuous pathways for high electrical conductivity. However, such a destructive strategy reduces the integrity of the composites. Here, this problem is solved by incorporating small loading of nonfunctionalized graphene flakes into the composites. The flakes introduce cavities that are filled with liquid metal after only relatively mild press-rolling (<0.1 MPa) to form electrically conductive continuous pathways within the polymeric matrix, while maintaining the integrity and flexibility of the composites. The composites are characterized to show that even very low graphene loadings (≈0.6 wt%) can achieve high electrical conductivity. The electrical conductance remains nearly constant, with changes less than 0.5%, even under a relatively high applied pressure of >30 kPa. The composites are used for forming flexible electrically-conductive tracks in electronic circuits with a self-healing property. The demonstrated application of co-fillers, together with liquid metal droplets, can be used for establishing electrically-conductive printable-composite tracks for future large-area flexible electronics.

Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites.

Graphene platelets (GnPs) are a class of novel 2D nanomaterials owing to their very small thickness (∼3 nm), high mechanical strength and electric conductivity (1460 S cm(-1)), and good compatibility with most polymers as well as cost-effectiveness. In this paper we present a low-cost processing technique for producing modified GnPs and an investigation of the electrical and mechanical properties of the resulting composites. After dispersing GnPs in solvent N-methyl-2-pyrrolidone, a long-chain surfactant (Jeffamine D 2000, denoted J2000) was added to covalently modify GnPs, yielding J2000-GnPs. By adjusting the ratio of GnPs to the solvent, the modified GnPs show different average thickness and thus electrical conductivity ranging from 694 to 1200 S cm(-1). To promote the exfoliation and dispersion of J2000-GnPs in a polymeric matrix, they were dispersed in the solvent again and further modified using diglycidyl ether of bisphenol A (DGEBA) producing m-GnPs, which were then compounded with an epoxy resin for the development of epoxy/m-GnP composites. A percolation threshold of electrical volume resistivity for the resulting composites was observed at 0.31 vol%. It was found that epoxy/m-GnP composites demonstrated far better mechanical properties than those of unmodified GnPs of the same volume fraction. For example, m-GnPs at 0.25 vol% increased the fracture energy release rate G1c from 0.204 ± 0.03 to 1.422 ± 0.24 kJ m(-2), while the same fraction of unmodified GnPs increased G1c to 1.01 ± 0.24 kJ m(-2). The interface modification also enhanced the glass transition temperature of neat epoxy from 58.9 to 73.8 °C.

Quality factor effect on the wireless range of microstrip patch antenna strain sensors.

Recently introduced passive wireless strain sensors based on microstrip patch antennas have shown great potential for reliable health and usage monitoring in aerospace and civil industries. However, the wireless interrogation range of these sensors is limited to few centimeters, which restricts their practical application. This paper presents an investigation on the effect of circular microstrip patch antenna (CMPA) design on the quality factor and the maximum practical wireless reading range of the sensor. The results reveal that by using appropriate substrate materials the interrogation distance of the CMPA sensor can be increased four-fold, from the previously reported 5 to 20 cm, thus improving considerably the viability of this type of wireless sensors for strain measurement and damage detection.

Advanced Energy Harvesters and Energy Storage for Powering Wearable and Implantable Medical Devices.

Wearable and implantable active medical devices (WIMDs) are transformative solutions for improving healthcare, offering continuous health monitoring, early disease detection, targeted treatments, personalized medicine, and connected health capabilities. Commercialized WIMDs use primary or rechargeable batteries to power their sensing, actuation, stimulation, and communication functions, and periodic battery replacements of implanted active medical devices pose major risks of surgical infections or inconvenience to users. Addressing the energy source challenge is critical for meeting the growing demand of the WIMD market that is reaching valuations in the tens of billions of dollars. This review critically assesses the recent advances in energy harvesting and storage technologies that can potentially eliminate the need for battery replacements. With a key focus on advanced materials that can enable energy harvesters to meet the energy needs of WIMDs, this review examines the crucial roles of advanced materials in improving the efficiencies of energy harvesters, wireless charging, and energy storage devices. This review concludes by highlighting the key challenges and opportunities in advanced materials necessary to achieve the vision of self-powered wearable and implantable active medical devices, eliminating the risks associated with surgical battery replacement and the inconvenience of frequent manual recharging.

Biomimetic Electronic Skin through Hierarchical Polymer Structural Design.

Human skin comprises multiple hierarchical layers that perform various functions such as protection, sensing, and structural support. Developing electronic skin (E-skin) with similar properties has broad implications in health monitoring, prosthetics, and soft robotics. While previous efforts have predominantly concentrated on sensory capabilities, this study introduces a hierarchical polymer system that not only structurally resembles the epidermis-dermis bilayer structure of skin but also encompasses sensing functions. The system comprises a polymeric hydrogel, representing the "dermis", and a superimposed nanoporous polymer film, forming the "epidermis". Within the film, interconnected nanoparticles mimic the arrangement of interlocked corneocytes within the epidermis. The fabrication process employs a robust in situ interfacial precipitation polymerization of specific water-soluble monomers that become insoluble during polymerization. This process yields a hybrid layer establishing a durable interface between the film and hydrogel. Beyond the structural mimicry, this hierarchical structure offers functionalities resembling human skin, which includes (1) water loss protection of hydrogel by tailoring the hydrophobicity of the upper polymer film; (2) tactile sensing capability via self-powered triboelectric nanogenerators; (3) built-in gold nanowire-based resistive sensor toward temperature and pressure sensing. This hierarchical polymeric approach represents a potent strategy to replicate both the structure and functions of human skin in synthetic designs.

Bulk Schottky Junctions-Based Flexible Triboelectric Nanogenerators to Power Backscatter Communications in Green 6G Networks.

This work introduces a novel method to construct Schottky junctions to boost the output performance of triboelectric nanogenerators (TENGs). Perovskite barium zirconium titanate (BZT) core/metal silver shell nanoparticles are synthesized to be embedded into electrospun polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) nanofibers before they are used as tribo-negative layers. The output power of TENGs with composite fiber mat exhibited >600% increase compared to that with neat polymer fiber mat. The best TENG achieved 1339 V in open-circuit voltage, 40 µA in short-circuit current and 47.9 W m-2 in power density. The Schottky junctions increased charge carrier density in tribo-layers, ensuring a high charge transfer rate while keeping the content of conductive fillers low, thus avoiding charge loss and improving performance. These TENGs are utilized to power radio frequency identification (RFID) tags for backscatter communication (BackCom) systems, enabling ultra-massive connectivity in the 6G wireless networks and reducing information communications technology systems' carbon footprint. Specifically, TENGs are used to provide an additional energy source to the passive tags. Results show that TENGs can boost power for BackCom and increase the communication range by 386%. This timely contribution offers a novel route for sustainable 6G applications by exploiting the expanded communication range of BackCom tags.

Advances in Wearable Piezoelectric Sensors for Hazardous Workplace Environments.

Recent advances in wearable energy harvesting technology as solutions to occupational health and safety programs are presented. Workers are often exposed to harmful conditions-especially in the mining and construction industries-where chronic health issues can emerge over time. While wearable sensors technology can aid in early detection and long-term exposure tracking, powering them and the associated risks are often an impediment for their widespread use, such as the need for frequent charging and battery safety. Repetitive vibration exposure is one such hazard, e.g., whole body vibration, yet it can also provide parasitic energy that can be harvested to power wearable sensors and overcome the battery limitations. This review can critically analyze the vibration effect on workers' health, the limitations of currently available devices, explore new options for powering different personal protective equipment devices, and discuss opportunities and directions for future research. The recent progress in self-powered vibration sensors and systems from the perspective of the underlying materials, applications, and fabrication techniques is reviewed. Lastly, the challenges and perspectives are discussed for reference to the researchers who are interested in self-powered vibration sensors.

Artificial Muscles and Soft Robotic Devices for Treatment of End-Stage Heart Failure.

Medical soft robotics constitutes a rapidly developing field in the treatment of cardiovascular diseases, with a promising future for millions of patients suffering from heart failure worldwide. Herein, the present state and future direction of artificial muscle-based soft robotic biomedical devices in supporting the inotropic function of the heart are reviewed, focusing on the emerging electrothermally artificial heart muscles (AHMs). Artificial muscle powered soft robotic devices can mimic the action of complex biological systems such as heart compression and twisting. These artificial muscles possess the ability to undergo complex deformations, aiding cardiac function while maintaining a limited weight and use of space. Two very promising candidates for artificial muscles are electrothermally actuated AHMs and biohybrid actuators using living cells or tissue embedded with artificial structures. Electrothermally actuated AHMs have demonstrated superior force generation while creating the prospect for fully soft robotic actuated ventricular assist devices. This review will critically analyze the limitations of currently available devices and discuss opportunities and directions for future research. Last, the properties of the cardiac muscle are reviewed and compared with those of different materials suitable for mechanical cardiac compression.

Scalable Manufacturing Process and Multifunctional Performance of Cotton Fibre-Reinforced Poly(Lactic Acid) (PLA) Bio-Composites Coated by Graphene Oxide.

Natural fibre biopolymer composites with both fibres and matrix being derived from biomaterials are increasingly used in demanding applications, such as sensing, packaging, building, and transport, and require good electrical, thermal, and flame retardant properties. Herein, an investigation of the effectiveness of functionalising nonwoven cotton/poly(lactic acid) (PLA) fibre mats with graphene oxide nanosheets has been reported by using a facile dip-coating method followed by thermal reduction for enhancing the electric, thermal, and abrasion-resistance properties. The manufacturing processes for preparing biocomposites and introducing functionality are readily scalable. Experimental results reveal that with the addition of less than 0.5 wt% graphene nanoplatelets, the biocomposites showed significant improvements in abrasion resistance, electrical conductivity, thermal conductivity, and diffusivity. Furthermore, the composite shows excellent piezo-resistivity to act as strain sensors with a gauge factor of 2.59 at strains up to 1%.

Functional Ultra-High Molecular Weight Polyethylene Composites for Ligament Reconstructions and Their Targeted Applications in the Restoration of the Anterior Cruciate Ligament.

The selection of biomaterials as biomedical implants is a significant challenge. Ultra-high molecular weight polyethylene (UHMWPE) and composites of such kind have been extensively used in medical implants, notably in the bearings of the hip, knee, and other joint prostheses, owing to its biocompatibility and high wear resistance. For the Anterior Cruciate Ligament (ACL) graft, synthetic UHMWPE is an ideal candidate due to its biocompatibility and extremely high tensile strength. However, significant problems are observed in UHMWPE based implants, such as wear debris and oxidative degradation. To resolve the issue of wear and to enhance the life of UHMWPE as an implant, in recent years, this field has witnessed numerous innovative methodologies such as biofunctionalization or high temperature melting of UHMWPE to enhance its toughness and strength. The surface functionalization/modification/treatment of UHMWPE is very challenging as it requires optimizing many variables, such as surface tension and wettability, active functional groups on the surface, irradiation, and protein immobilization to successfully improve the mechanical properties of UHMWPE and reduce or eliminate the wear or osteolysis of the UHMWPE implant. Despite these difficulties, several surface roughening, functionalization, and irradiation processing technologies have been developed and applied in the recent past. The basic research and direct industrial applications of such material improvement technology are very significant, as evidenced by the significant number of published papers and patents. However, the available literature on research methodology and techniques related to material property enhancement and protection from wear of UHMWPE is disseminated, and there is a lack of a comprehensive source for the research community to access information on the subject matter. Here we provide an overview of recent developments and core challenges in the surface modification/functionalization/irradiation of UHMWPE and apply these findings to the case study of UHMWPE for ACL repair.

Recent developments of hybrid piezo-triboelectric nanogenerators for flexible sensors and energy harvesters.

Hybrid piezo-triboelectric nanogenerators constitute a new class of self-powered systems that exploit the synergy of piezoelectric and triboelectric mechanisms to improve energy harvesting efficencies and address the energy and power needs of portable and wearable electronic devices. The unique, synergistic electrical coupling mechanisms of piezoelectric and triboelectric effects increase the electric outputs and energy conversion efficiency of hybrid generators to beyond a linear summation of the contributions from individual triboelectric and piezoelectric mechanisms. Due to their large surface-area-to-volume ratios and outstanding mechanical, electronic and thermal properties, nanomaterials are favourable building blocks for constructing hybrid nanogenerators and represent a large family of flexible energy harvesting electronic structures and devices. Herein, we review the recent advances of hybrid piezo-triboelectric nanogenerators, with a particular focus on microstructure design, synergy mechanisms, and future research opportunities with significant potential for physiological monitoring, health care applications, transportation, and energy harvesting. The main strategies for improving electrical output performance are identified and examined, including novel nanostructures for increasing the contact area of the triboelectric pair, and nano-additives for enhancing the surface potential difference between the triboelectric pair and piezoelectric layers. Future applications and commercialization opportunities of these nanogenerators are also reviewed.

Mindlin plate theory for damage detection: imaging of flexural inhomogeneities.

The scattering of plate waves by localized damage or defects that can be modeled as flexural inhomogeneities is examined within the framework of Mindlin plate theory. These inhomogeneities are characterized by variations in one or more of the four plate-theory parameters: the bending stiffness, shear stiffness, rotary inertia, and transverse inertia. It is shown that the Born approximation for the scattered field leads to a plate-theory analog of the Fourier diffraction theorem, which relates the far-field scattering amplitude to the spatial Fourier transform of the inhomogeneity variations. The application of this result is illustrated by using synthetic data derived for an idealized model of a delamination as a flexural inhomogeneity, ignoring mode coupling effects. A computationally efficient implementation of the filtered back-propagation algorithm, based on the eigensystem of the scattering operator, is employed for image reconstruction. The implications for in-situ imaging of structural damage in plate-like structures are briefly discussed, and some directions for further work are indicated.

Wearable Temperature Sensors with Enhanced Sensitivity by Engineering Microcrack Morphology in PEDOT:PSS-PDMS Sensors.

Wearable temperature sensors with high sensitivity, linearity, and flexibility are required to meet the increasing demands for unobtrusive monitoring of temperature changes indicative of the onset of infections and diseases. Herein, we present a new method for engineering highly sensitive and flexible temperature sensors made by sandwiching a poly(3,4-ethylenedioxythiophene):polystyrene (PEDOT:PSS) sensing film between two poly(dimethylsiloxane) (PDMS) substrates. Pre-stretching the sensor to a certain strain can create stable microcracks in the sensing layer that bestow high senstivity and linearity. The average length and density of the microcracks, which dictate the sensor's temperature sensitivity, can be engineered by controlling three key processing parameters, incuding (a) pre-stretching strain, (b) sulfuric acid treatment time, and (c) surface roughness of the substrate. For a given acid treatment time and surface roughness condition, the density and average length of the microcracks increase pre-stretching strain. A smooth PDMS substrate tends to yield long and straight cracks in the PEDOT:PSS film, compared to shorter microcracks with higher density on rough surfaces. Crack density can be further increased via sulfuric acid treatment with an optimum duration of approximately 3 h. Prolonged treatment would result in weak adhesion between the PEDOT:PSS film and the PDMS substrate, which in turn reduces the microcrack density but increases the crack length. By optimizing the three design parameters we have designed a high performance PEDOT:PSS-PDMS sensor that provides a combined high temperature sensitivity of 0.042 °C-1 with an excellent linearity of 0.998 (from 30 to 55 °C), better than the highest temperature sensitivity of PEDOT:PSS based sensors reported in the literature. With a good optical transparency, high temperature sensitivity, excellent linearity, and high flexibility, this microcrack-based sensor is a very promising wearable temperature-sensing solution.

Direct 3D Printing of Highly Anisotropic, Flexible, Constriction-Resistive Sensors for Multidirectional Proprioception in Soft Robots.

A key missing technology for the emerging field of soft robotics is the provision of highly selective multidirectional tactile sensing that can be easily integrated into a robot using simple fabrication techniques. Conventional strain sensors, such as strain gauges, are typically designed to respond to strain in a single direction and are mounted on the external surface of a structure. Herein, we present a technique for three-dimensional (3D) printing of multidirectional, anisotropic, and constriction-resistive strain sensors, which can be directly integrated into the interior of soft robots. Using a carbon-nanotube-reinforced polylactic acid (PLA-CNT), both the sensing element and the conductive interconnect of the sensor system are 3D-printed. The sensor's sensitivity and anisotropy can be adjusted by controlling the air gap between printed adjacent tracks, infill density, and build orientation relative to the main loading direction. In particular, sensors printed with a near-zero air gap, i.e., adjacent tracks forming a kissing bond, can achieve a gauge factor of ∼1342 perpendicular to the raster orientation and a gauge factor of ∼1 parallel to the raster orientation. The maximum directional selectivity of this ultrasensitive sensor is 31.4, which is approximately 9 times greater than the highest value reported for multidirectional sensors so far. The high sensitivity stems from the progressive opening and closing of the kissing bond between adjacent tracks. The potential of this type of sensors and the simple manufacturing process are demonstrated by integrating the sensor with a soft robotic actuator. The sensors are able to identify and quantify the bending deformation and angle in different directions. The ability to fabricate sensors with tailored footprints and directional selectivity during 3D printing of soft robotic systems paves the way toward highly customizable, highly integrated multifunctional soft robots that are better able to sense both themselves and their environments.

Multimodal Capacitive and Piezoresistive Sensor for Simultaneous Measurement of Multiple Forces.

Quantitative information on the magnitudes and directions of multiple contacting forces is crucial for a wide range of applications including human-robot interaction, prosthetics, and bionic hands. Herein we report a highly stretchable sensor integrating capacitive and piezoresistive mechanisms that can simultaneously determine multiple forces. The sensor consists of three layers in a sandwich design. The two facesheets serve as both piezoresistive sensors and electrodes for the capacitive sensor, with the core being a porous structure made by using a simple sugar particle template technique to give them high stretchability. The two facesheets contain segregated conductive networks of silver nanowires (AgNWs) and carbon nanofibers (CNFs). By measuring the changes in the electrical resistance of the facesheets and the capacitance between the facesheets, three separate mechanical stimuli can be determined, including normal pressure, in-plane stretch, and transverse shear force. The newly developed multidirectional sensor offers a significant opportunity for the next generation of wearable sensors for human health monitoring and bionic skin for robots.

Magnetic and Conductive Liquid Metal Gels.

Liquid metals are fast becoming a new class of universal and frictionless additives for the development of multifunctional soft and flexible materials. Herein, nanodroplets of eutectic gallium-indium alloy, which is liquid at room temperature, were used as a platform for the formulation of electrically conductive and magnetically responsive gels with the incorporation of Fe3O4 nanoparticles. The nanoadditives were prepared in situ within a water-based solution of polyvinyl alcohol. A borax cross-linking reaction was then performed to yield multifunctional flexible and self-healing gels. The physicochemical properties and changes in the nanoadditives at each step of the gel preparation method were characterized. Oxidation and complexation reactions between the liquid metal and iron oxide nanoadditives were observed. A mixture of nanosized functional magnetic Fe3O4/Fe2O3 and In-Fe oxide complexes was found to enable the magnetic susceptibility of the gels. The mechanical and self-healing properties of the gels were assessed, and finally, this flexible and multifunctional material was used as an electronic switch via remote magnetic actuation. The developed conductive and magnetic gels demonstrate great potential for the design of soft electronic systems.

MXene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions.

MXene/chitosan nanocoating for flexible polyurethane foam (PUF) was prepared via layer-by-layer (LbL) approach. MXene (Ti3C2) ultra-thin nanosheets were obtained through etching process of Ti3AlC2 followed by exfoliation. The deposition of MXene/chitosan nanocoating was conducted by alternatingly immersing the PUF into a chitosan solution and a Ti3C2 aqueous dispersion, which resulted in different number of bilayers (BL) ranging from 2, 5 and 8. Owing to the utilization of ultra-thin Ti3C2 nanosheets, the weight gain was only 6.9% for 8 BL coating of PUF, which minimised the unfavourable impact on the intrinsic properties of PUF. The Ti3C2/chitosan coating significantly reduced the flammability and smoke releases of PUF. Compared with unmodified PUF, the 8 BL coating reduced the peak heat release rate by 57.2%, alongside with a 65.5% reduction in the total heat release. The 8 BL coating also showed outstanding smoke suppression ability with total smoke release decreased by 71.1% and peak smoke production rate reduced by 60.3%, respectively. The peak production of CO and CO2 gases also decreased by 70.8% and 68.6%, respectively. Furthermore, an outstanding char formation performance of 37.2 wt.% residue was obtained for 8 BL coated PUF, indicating the excellent barrier and carbonization property of the hybrid coating.

Multifunctional Polymer Nanocomposites Reinforced by Aligned Carbon Nanomaterials.

Carbon nanomaterials such as carbon black (CB), carbon nanotubes (CNTs), and graphene have demonstrated significant potential as fillers to improve the electrical, thermal, and mechanical properties of polymers and their fiber-reinforced polymer composites. The level of improvement has been found to depend significantly on the degree of alignment of carbon nanomaterials. Due to the very small scale and complex interactions of carbon nanomaterials with polymers and structural fibers, alignment in a given direction has been a major challenge. Over the past decade, considerable effort has been devoted to developing effective strategies to align carbon nanomaterials in polymer matrices. However, significant technological challenges remain, and there is still a lack of understanding of the alignment mechanisms and their effects on the properties of polymers and composites. This paper reviews in situ alignment techniques including shear deformation, mechanical stretching, electrospinning, and application of an external magnetic or electric field, and ex situ techniques including using vertically grown CNTs or graphene. This review particularly focuses on physical mechanisms underpinning the magnetic or electric field-induced alignment and theoretical analyses that describe the different motions occurring and the major parameters controlling alignment. Moreover, this review highlights the recent research findings of the effects of alignment on the properties of polymer nanocomposites. The outlook towards the challenges and opportunities in this field are also discussed in this review.

Ultrasensitive and Stretchable Strain Sensors Based on Mazelike Vertical Graphene Network.

Here, we report a new type of strain sensors consisting of vertical graphene nanosheets (VGNs) with mazelike network, sandwiched between poly(dimethylsiloxane) (PDMS) substrates. The new sensors outperform most graphene thin-film-based sensors reported previously and show an outstanding combination of high stretchability of ∼120%, excellent linearity over the entire detection range, and high sensitivity with a gauge factor of ∼32.6. The sensitivity can be tuned by controlling the thickness of VGNs, with sensors consisting of thicker VGNs showing higher sensitivity but slightly lower stretchability (the maximum gauge factor is ∼88.4 with a maximum detection strain of ∼55%). Detailed microscopic examinations reveal that the ultrahigh sensitivity stems from the formation of microcracks initiated in the buffer layer. These microcracks are bridged by strings of graphene/PDMS, enabling the conductive network to continue to function up to a strain level significantly higher than that of previously reported graphene thin-film-based sensors. Furthermore, the present sensors have been found to be insensitive to temperatures and various liquids, including water and 0.1 mol L-1 sodium chloride solution (similar to the sweat on human skin). Demonstrations are presented to highlight the new sensors' potential as wearable devices for human motion detection and pressure distribution measurement.

Novel Electrically Conductive Porous PDMS/Carbon Nanofiber Composites for Deformable Strain Sensors and Conductors.

Highly flexible and deformable electrically conductive materials are vital for the emerging field of wearable electronics. To address the challenge of flexible materials with a relatively high electrical conductivity and a high elastic limit, we report a new and facile method to prepare porous polydimethylsiloxane/carbon nanofiber composites (denoted by p-PDMS/CNF). This method involves using sugar particles coated with carbon nanofibers (CNFs) as the templates. The resulting three-dimensional porous nanocomposites, with the CNFs embedded in the PDMS pore walls, exhibit a greatly increased failure strain (up to ∼94%) compared to that of the solid, neat PDMS (∼48%). The piezoresistive response observed under cyclic tension indicates that the unique microstructure provides the new nanocomposites with excellent durability. The electrical conductivity and the gauge factor of this new nanocomposite can be tuned by changing the content of the CNFs. The electrical conductivity increases, while the gauge factor decreases, upon increasing the content of CNFs. The gauge factor of the newly developed sensors can be adjusted from approximately 1.0 to 6.5, and the nanocomposites show stable piezoresistive performance with fast response time and good linearity in ln(R/R0) versus ln(L/L0) up to ∼70% strain. The tunable sensitivity and conductivity endow these highly stretchable nanocomposites with considerable potential for use as flexible strain sensors for monitoring the movement of human joints (where a relatively high gauge factor is needed) and also as flexible conductors for wearable electronics (where a relatively low gauge factor is required).