Melamine Polymerization Promotes Compact Phosphorus/Carbon Composite for High-Performance and Safe Lithium Storage.

Phosphorus is regarded as a promising material for high-performance lithium-ion batteries (LIBs) due to its high theoretical capacity, appropriate lithiation potential, and low lithium-ion diffusion barrier. Phosphorus/carbon composites (PC) are engineered to serve as high-capacity high-rate anodes; the interaction between phosphorus and carbon, long-term capacity retention, and safety problems are important issues that must be well addressed simultaneously. Herein, an in situ polymerization approach to fabricate a poly-melamine-hybridized (pMA) phosphorus/carbon composite (pMA-PC) is employed. The pMA hybridization enhances the density and electrical conductivity of the PC, improves the structural integrity, and facilitates stable electron transfer within the pMA-PC composite. Moreover, the pMA-PC composite exhibits efficient adsorption of lithium polysulfides, enabling stable transport of Li+ ions. Therefore, the pMA-PC anode demonstrates a high specific charging capacity of 1,381 mAh g-1 at 10 A g-1, and a great capacity retention of 86.7% at 1 A g-1 over 500 cycles. The synergistic effect of phosphorus and nitrogen further confers excellent flame retardant properties to the pMA-PC anode, including self-extinguishing in 2.5 s, and a much lower combustion temperature than PC. The enhanced capacity and safety performance of pMA-PC show potential in future high-capacity and high-rate LIBs.

Fabrication of Single-Crystal Violet Phosphorus Flakes For Ultrasensitive Photodetection.

Violet phosphorus (VP) has attracted a lot of attention for its unique physicochemical properties and emerging potential in photoelectronic applications. Although VP has a van der Waals (vdW) structure similar to that of other 2D semiconductors, direct synthesis of VP on a substrate is still challenging. Moreover, optoelectronic devices composed of transfer-free VP flakes have not been demonstrated. Herein, a bismuth-assisted vapor phase transport technique is designed to grow uniform single-crystal VP flakes on the SiO2 /Si substrate directly. The size of the crystalline VP flakes is an order of magnitude larger than that of previous liquid-exfoliated samples. The photodetector fabricated with the VP flakes shows a high responsivity of 12.5 A W-1 and response/recovery time of 3.82/3.03 ms upon exposure to 532 nm light. Furthermore, the photodetector shows a small dark current (<1 pA) that is beneficial to high-sensitivity photodetection. As a result, the detectivity is 1.38 × 1013 Jones that is comparable with that of the vdW p-n heterojunction detector. The results reveal the great potential of VP in optoelectronic devices as well as the CVT technique for the growth of single-crystal semiconductor thin films.

Knockdown of lncRNA AU020206 could inhibit microglia apoptosis in ischemic stroke.

The diagnostic biomarkers associated with ischemic stroke (IS) that may have clinical utility remain elucidated. Thus, the potential functional lncRNAs in IS were explored. The Gene Expression Omnibus database provided the transcriptome profile of IS for download. WGCNA analysis and integrated bioinformatics were used to find genes that were differentially expressed (DEGs). The Starbase database created the lncRNA-based ceRNA network. In order to investigate the molecular mechanism and involved pathways of DEGs in IS, functional enrichment analysis was carried out. Using qRT-PCR, lncRNAs identified as putative IS biomarkers were confirmed to be expressed in a permanent middle cerebral artery occlusion (MCAO) model. Using the annexin V/PI apoptosis test, the amount of apoptosis in oxygen-glucose deprivation (OGD) cells was measured. A total of 1600 common differentially expressed - protein-coding RNA (DE-pcRNAs) and 26 DE-lncRNAs were identified. The results of enrichment analysis indicate that the cytokine may be regulated by common DE-pcRNAs and are vital in the progress of IS. A lncRNAs-mediated ceRNA network including lncRNAs AU020206, Brip1os, F630028O10Rik and 9530082P21Rik was constructed. The expression of these lncRNAs was significantly increased in MCAO model. Knockdown of lncRNA AU020206 inhibited microglia apoptosis in OGD cell model. We constructed a lncRNAs-mediated ceRNA network and found that lncRNA AU020206 inhibited microglia apoptosis in OGD cell model. These findings provided further evidence for the diagnosis and a novel avenue for targeted therapy of IS.

Development and Validation of a Liquid Chromatography-Tandem Mass Spectrometry Method for Screening Potential Citrate Lyase Inhibitors from a Library of Marine Compounds.

Tuberculosis, a persistent illness caused by Mycobacterium tuberculosis, remains a significant global public health challenge. The widespread use of anti-tuberculosis drugs has resulted in the emergence of drug-resistant strains, which complicates treatment efforts. Addressing this issue is crucial and hinges on the development of new drugs that can effectively target the disease. This involves identifying novel therapeutic targets that can disrupt the bacterium's survival mechanisms in various environments such as granulomas and lesions. Citrate lyase, essential for the survival of Mycobacterium species at lesion sites and in granulomatous conditions, is a potential target for the treatment of tuberculosis. This manuscript aimed to construct an efficient enzyme inhibitor screening platform using ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry (UHPLC-QTOF MS). This system can accurately identify compounds with enzyme inhibitory activity from a library of marine terpenoids and phenolic compounds. Utilizing the screened herbal enzyme inhibitors as a starting point, we analyzed their chemical structures and skillfully built a library of marine compounds based on these structures. The results showed that all of the tested compounds from the phenolics library inhibited citrate lyase by more than 50%, and a significant portion of terpenoids also demonstrated inhibition, with these active terpenoids comprising over half of the terpenoids tested. The study underscores the potential of marine-derived phenolic and terpenoid compounds as potent inhibitors of citrate lyase, indicating a promising direction for future investigations in treating tuberculosis and associated disorders.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment.

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Pecan (Carya illinoinensis (Wangenh.) K. Koch) nuts as an emerging source of protein: extraction, physicochemical and functional properties.

BACKGROUND: The increasing demand for sustainable alternatives to traditional protein sources, driven by population growth, underscores the importance of protein in a healthy diet. Pecan (Carya illinoinensis (Wangenh.) K. Koch) nuts are currently underutilized as plant-based proteins but hold great potential in the food industry. However, there is insufficient information available on pecan protein, particularly its protein fractions. This study aimed to explore the physicochemical and functional properties of protein isolate and the main protein fraction glutelin extracted from pecan nuts. RESULTS: The results revealed that glutelin (820.67 ± 69.42 g kg-1) had a higher crude protein content compared to the protein isolate (618.43 ± 27.35 g kg-1), while both proteins exhibited amino acid profiles sufficient for adult requirements. The isoelectric points of protein isolate and glutelin were determined to be pH 4.0 and pH 5.0, respectively. The denaturation temperature of the protein isolate (90.23 °C) was higher than that of glutelin (87.43 °C), indicating a more organized and stable conformation. This is further supported by the fact that the protein isolate had a more stable main secondary structure than glutelin. Both proteins demonstrated improved solubility, emulsifying, and foaming properties at pH levels deviating from their isoelectric points in U-shaped curves. Compared to the protein isolate, glutelin displayed superior water and oil absorption capacity along with enhanced gelling ability. CONCLUSION: The protein isolate and glutelin from pecan nuts exhibited improved stability and competitive functional properties, respectively. The appropriate utilization of these two proteins will support their potential as natural ingredients in various food systems. © 2024 Society of Chemical Industry.

Heteropolyacids: An Ultrasensitive Ionic Volume-Enhanced Raman Scattering Platform.

Surface-enhanced Raman scattering (SERS) is regarded as the most direct and powerful tool to identify chemical fingerprints. However, current SERS substrate materials still face some critical challenges, including low molecular utilization efficiency and low selectivity. Herein, a novel oxygen vacancy heteropolyacid─H10Fe3Mo21O51 (HFMO)─is developed as a high-performance volume-enhanced Raman scattering (VERS)-active platform. Due to its merit of water solubility, HFMO forms a special coordination bond with the probe molecule at the molecular level, which allows its enhancing ability to be comparable to that of noble metals. An enhancement factor of 1.26 × 109 and a very low detection limit of 10-13 M for rhodamine 6G were obtained. A robust O-N coordination bond was formed between the anion of HFMO and the probe molecule, resulting in a special electron transfer path (Mo-O-N) with high selectivity, which is verified using X-ray photoelectron spectroscopy analysis and density functional theory calculations. That is to say, the proposed HFMO platform has excellent VERS enhancing effect, specifically for the molecules containing the imino group (e.g., methyl blue, detection limit: 10-11 M), offering the merits of high reproducibility and uniformity, high-temperature resistance, long-time laser irradiation, and strong acid resistance. Such an initial effort on the ionic type VERS platform may enable the further development of highly sensitive, highly selective, and water-soluble VERS technology.

Interfacial Engineering Enables Perovskite Heteroepitaxial Growth on Black Phosphorus for Flexible X-ray Detectors.

2D materials with atomic-scale thickness and mechanical robustness are required for flexible devices. The superior optoelectronic properties and high-Z atoms in metal halide perovskites render them desirable for X-ray detection, but the intrinsic brittleness is an obstacle hampering the applications in flexible detectors. Herein, an interfacial engineering strategy is demonstrated for the epitaxial growth of methylammonium lead bromide (MAPbBr3 ) on black phosphorus (BP) for flexible X-ray detectors. The mechanically robust, high-quality heterostructure consisting of a Pb transition layer is synthesized for the two-way bridging of BP and MAPbBr3 . Excellent optoelectronic properties such as a high X-ray sensitivity of 1,609 ± 122 µC Gy-1  cm-2 (80 times higher than that of the commercial amorphous Se), a fast response time of 40 ± 5 ms, as well as a low detection limit of 3 µGys-1 (about a fifteenth of the medical chest X-ray dose rate) are achieved from the simple and planar direct X-ray detector fabricated on an organic filter membrane. More importantly, these flat and simple devices are bendable and mechanically durable by exhibiting only 10% photocurrent degradation after 200 bending cycles. The novel heterostructure has great potential in large-area, flexible, and sensitive X-ray detection applications.

Time-ordering japonica/geng genomes analysis indicates the importance of large structural variants in rice breeding.

Temperate japonica/geng (GJ) rice yield has significantly improved due to intensive breeding efforts, dramatically enhancing global food security. However, little is known about the underlying genomic structural variations (SVs) responsible for this improvement. We compared 58 long-read assemblies comprising cultivated and wild rice species in the present study, revealing 156 319 SVs. The phylogenomic analysis based on the SV dataset detected the putatively selected region of GJ sub-populations. A significant portion of the detected SVs overlapped with genic regions were found to influence the expression of involved genes inside GJ assemblies. Integrating the SVs and causal genetic variants underlying agronomic traits into the analysis enables the precise identification of breeding signatures resulting from complex breeding histories aimed at stress tolerance, yield potential and quality improvement. Further, the results demonstrated genomic and genetic evidence that the SV in the promoter of LTG1 is accounting for chilling sensitivity, and the increased copy numbers of GNP1 were associated with positive effects on grain number. In summary, the current study provides genomic resources for retracing the properties of SVs-shaped agronomic traits during previous breeding procedures, which will assist future genetic, genomic and breeding research on rice.

Adsorptive removal of Cr(III)-EDTA chelate from an aqueous solution by magnetic mesoporous silica microspheres.

The 3-aminopropyltrimethoxysilane-modified magnetic mesoporous adsorbent (FNMs/APTES) was synthesized and applied to remove Cr(III)-EDTA chelates from water. The characterization of FNMs/APTES showed that the prepared adsorbent with a magnetic mesoporous structure was successfully grafted by APTES, which has good stability under acid conditions. The maximum capacities of FNMs/APTES for Cr(III)-EDTA adsorption at 15, 25 and 35 °C and pH 4.0 were 12.58, 13.13 and 14.00 mg·g-1, respectively. The adsorption isotherm of FNMs/APTES for Cr(III)-EDTA conforms to the Freundlich model, and the adsorption kinetic model accords with the pseudo-second-order kinetic model. Adsorption of Cr(III)-EDTA on the adsorbent was not affected in the presence of Na+, K+ and Ca2+ even at 100 mmol·L-1. Cr(III)-EDTA was anchored on FNMs/APTES through electrostatic interaction between protonated amino groups of adsorbents and Cr(III)-EDTA anions, and Cr(III)-EDTA chelates were adsorbed as a whole on the adsorbent. The Cr(III)-EDTA-saturated adsorbent can be readily regenerated in HCl solution and 83.03% of the initial Cr(III)-EDTA adsorption capacity remains after four adsorption-regeneration experiment cycles. The results highlighted that the FNMs/APTES as a potential adsorbent can be applied for the minimization of Cr(III)-EDTA chelates from water.

Phosphorus-Based Materials for High-Performance Alkaline Metal Ion Batteries: Progress and Prospect.

Alkaline metal-ion batteries (AIBs) such as lithium-ion batteries (LIBs), sodium-ion batteries (NIBs), and potassium-ion batteries (KIBs) are potential energy storage systems. Currently, although LIBs are widely used in consumer electronics and electric vehicles, the electrochemical performance, safety, and cost of current AIBs are still unable to meet the needs for many future applications, such as large-scale energy storage, due to the low theoretical capacity of cathode/anode materials, flammability of electrolytes and limited Li resources. It is thus imperative to develop new materials to improve the properties of AIBs. Several promising cathodes, anodes, and electrolytes have been developed and among the new battery materials, phosphorus-based (P-based) materials have shown great promise. For example, P and metal phosphide anodes have high theoretical capacity, resource abundance, and environmental friendliness boding well for future high-energy-density AIBs. Besides, phosphate cathode materials have the advantages of low cost, high safety, high voltage, and robust stability, and P-based materials like LiPF6 and lithium phosphorus oxynitride are widely used electrolytes. In this paper, the latest development of P-based materials in AIBs, challenges, effective solutions, and new directions are discussed.

Fabricating Black-Phosphorus/Iron-Tetraphosphide Heterostructure via a Solid-Phase Solution-Precipitation Method for High-Performance Nitrogen Reduction.

Although constructing heterostructures is considered as one of the most successful strategies to improve the activity of a catalyst, the heterostructures usually suffer from the cumbersome preparation treatments and low-yield. Inspired by a solid-phase solution-precipitation (SPSP) process, an approach for interface intensive heterostructures with high yield is developed. Herein, a black-phosphorus/iron-tetraphosphide (BP/FeP4 ) heterostructure is prepared mechanochemically with high transient pressure by the solid-phase ball milling approach. The BP/FeP4 heterostructure delivers excellent catalytic performance in the nitrogen reduction reaction (NRR) as exemplified by an NH3 yield of 77.6 µg h-1 mg cat . - 1 \[{\rm{mg}}_{{\rm{cat}}{\rm{.}}}^{{\bm{ - }}1}\] and Faradic efficiency of 62.9% (-0.2 V), which are superior to that of most NRR catalysts recently reported. Experimental investigation and density-functional theory calculation indicate the importance of excess phosphorus in the heterostructures on the NRR activity, which assists the Fe atom to activate N2 via adsorbing the H atom. The results demonstrate the great potential of this new type of heterostructures prepared by the SPSP approach. Benefiting from the simple preparation process and low cost, the heterostructures offer a new insight into the development of highly efficient catalysts.

Carbon Nitride with Rationally Designed π-Conjugated Structure for Bright Blue-Violet Light-Emitting Diodes.

Carbon nitride consisting of the broken π-conjugated structure (bc-CN) is designed as the emitting layer in a blue-violet light emitting diode (LED). The bc-CN is prepared by a metal-oxide (MgO) template-assisted method, in which the low reaction temperature and nano MgO jointly control the degree of polymerization to form cyano groups and broken π-conjugation in the bc-CN nanosheets (bc-CN NS) which emit intense blue-violet photoluminescence at 412 nm. The broken π-conjugated heptazine-ring structure in the bc-CN NS mitigates non-radiation energy loss and promotes the d*-LP transition. As a result, a high quantum efficiency of 73.1% is achieved. The excellent dispersing ability of the bc-CN NS enables solution-based fabrication of the light emitting diode (LED). The LED exhibits intense electroluminescence of 236 cd m-2 at 412 nm with an external quantum efficiency of 0.46%. The broken π-conjugation modulates the optical properties of the polymerized carbon nitride semiconductor giving rise to intense blue-violet electroluminescence, which is very desirable for printable and wide-color-gamut display devices.

Efficient saccharification of Lycium barbarum leaf biomass by using enzyme cocktails produced by a novel fungus Aspergillus costaricensis LS18.

The utilization of agro-industrial residues is an interesting issue contributing to sustainable development and environmental protection. Lycium barbarum leaves (LBL) are agro-industrial residues of the L. barabrum berry cultivation and seriously underutilized, leading to resource waste and environmental pollution. In this study, we prepared cost-effective enzyme cocktails with high xylanase activity from a novel soil-derived fungal strain Aspergillus costaricensis LS18. The xylanase activity of these on-site produced enzyme cocktails was 3.49 ± 0.55 U/mL. Through the hydrolysis using the enzyme cocktails with 6% substrate loading at 45 °C for 12 h, 86.57 ± 1.81% of total reducing sugars (RS) from LBL was released. The concentration of RS in the hydrolysates reached 8.17 ± 0.33 mg/mL. In this study, LBL were added values by two mutually independent bioprocess ways. On the one hand, LBL were used as the only nutrients in the medium for the on-site production of enzyme cocktails by fermentation. On the other hand, through hydrolysis using this enzyme cocktail, LBL biomass was efficiently hydrolyzed and fermentable monosugars were gained. This study could benefit to the exploitation of LBL resources and provide the references for utilization of other agro-industrial residues.

Rapid solidification of simulated radioactive contaminated soil by continuous microwave sintering: Effects of temperature and doping level.

In order to find a rapid, efficient, safe and reliable treatment technology for radioactive contaminated soil, the microwave sintering method was used to sinter the simulated radioactive contaminated soil with different CeO2 content at 1100 °C, 1200 °C and 1300 °C for 30 min to achieve vitrification. The phase, microstructure, morphology, mechanical properties, and chemical durability of the sintered samples were investigated. XRD and SEM-EDS results showed that Ce4+ did not participate in the formation of the glass network, but was fixed in the glass network structure. The amorphous fraction of the samples sintered at 1300 °C can reach up to 98%. EDS results showed that the element distribution was uniform. In addition, the density and hardness values of the sintered matrices were in the range of 1.875-2.543 g/cm3 and 6.667-7.112 GPa, respectively. Our results show that the density and hardness values are related to the sintering temperature and CeO2 content. The normalized leaching rate of Ce in samples reached 10-7 g/(m2·d) after 28 d.

Influence of cascade reservoir operation in the Upper Mekong River on the general hydrological regime: A combined data-driven modeling approach.

Cross-border impact assessment of cascade reservoir operation on hydrological regimes is a vital prerequisite for the sustainable development and management of transboundary waters. However, assessment based on traditional hydrological modeling for transboundary rivers is limited by the availability of meteorological and hydrological data. In this study, a combined data-driven model (CV-LSTM) was built to simulate natural runoff without dam construction in the Upper Mekong River. Then, the simulated natural runoff was compared against the observation runoff influenced by dam operation to assess the impacts of reservoirs on flood and drought events. The research results are as follows: (1) CV-LSTM improved simulation performance by effectively utilizing spatial information from more extensive and diversified data, and it could overcome the limitation of classic data-driven models in that the spatial heterogeneity of input variables cannot be sufficiently considered. (2) Reservoir operation decreased the annual streamflow of the Upper Mekong River by 1.07% during the 2001-2016. In particular, with the operation of two mega reservoirs (Xiaowan and Nuozadu) after 2008, the annual streamflow decreased by 3.95%. (3) The upstream reservoirs exerted significant runoff regulative effects on the Lower Mekong during 2001-2016. Drought duration and severity significantly decreased at the Chiang Sean hydrological station, flood frequency decreased by 11%, and the mean day of flood occurrence decreased by 30%. This study developed an innovative approach, CV-LSTM, based on open-source spatial information, which could effectively analyze the cross-border impact of cascade reservoir operation. The results provide new insights into the quantitative assessment of the transboundary influence of upstream-downstream runoff change induced by cascade dams in international rivers.

Incidence of workplace violence against nurses among Chinese hospitals: A meta-analysis.

AIMS: To explore the incidence of workplace violence against nurses in Chinese hospitals. BACKGROUND: Previous systematic reviews on the incidence of workplace violence against Chinese health care workers did not include many articles published in Chinese. Although several studies have investigated cases of violence against health care providers in China, no meta-analysis has been conducted to assess the incidence of violence against Chinese nurses. EVALUATION: In this study, relevant data were retrieved from studies published up to July 2020. A meta-analysis was conducted using R software (Version 4.0). KEY FINDINGS: The 12-month incidence of workplace violence among Chinese nurses was 71% (95% CI 67%-75%), and verbal violence was the most common sub-type of violence (63%, 95% CI 58%-67%). CONCLUSION: Chinese nurses are at a high risk of violence at workplace. Hospital managers should explore ways to reduce violence against their employees, especially the younger nurses who work in secondary hospitals. IMPLICATIONS FOR NURSING MANAGEMENT: The findings of this study highlight the need to enhance the legal system in terms of laws meant to effectively mitigate violence against nurses in Chinese hospitals. Measures should be particularly taken to protect younger nurses who work in secondary hospitals.

Lnc00462717 regulates the permeability of the blood-brain tumor barrier through interaction with PTBP1 to inhibit the miR-186-5p/Occludin signaling pathway.

Blood-brain tumor barrier (BTB) severely restricts the efficient delivery of chemotherapeutic drugs into brain tumor tissue, which is a critical obstacle for glioma treatment. Recently, long noncoding RNAs (lncRNAs) have shown as regulation factors of numerous biological processes. In this study, we identified that Lnc00462717 was upregulated in glioma endothelial cells (GECs), and that knockdown of Lnc00462717 significantly increased the BTB permeability. Both bioinformatics and RNA immunoprecipitation (RIP) results revealed that Lnc00462717 interacts with polypyrimidine tract binding protein (PTBP1). Moreover, overexpression of PTBP1 significantly reversed the increase in BTB permeability caused by siLnc00462717. Furthermore, the binding sites between miR-186 and PTBP1 as well as between miR-186 and 3'UTR of Occludin mRNA were confirmed by RIP and luciferase assays, respectively. And the interaction of Lnc00462717 and PTBP1 significantly facilitated the binding of PTBP1 to 3'UTR of Occludin mRNA and then blocked the miR-186-5p-induced downregulation of Occludin. In addition, we identified that knockdown of Lnc00462717 or overexpression of miR-186-5p increased the accumulation of doxorubicin (Dox) in brain glioma via the ultrafast liquid chromatography-mass spectrometry system (UFLC-MS/MS system) and decreased the intracranial glioma volume in BALB/c nude mice. Taken together, these results show a novel molecular pathway in BTB that may provide a potential innovative strategy for glioma therapy.

Enhanced removal of Cr(III)-EDTA chelates from high-salinity water by ternary complex formation on DETA functionalized magnetic carbon-based adsorbents.

A novel amino-functionalized magnetic adsorbent (Fe3O4@C@DETA) was developed for adsorption of Cr(III) and Cr(III)-EDTA from wastewater. Fe3O4@C@DETA were successfully prepared by modification of Fe3O4@C with diethylenediamine (DETA), which exhibits a core-shell structure and sufficient saturation magnetization. Fe3O4@C@DETA exhibits much better adsorption performance for Cr(III) and its chelates than the Fe3O4@C because of newly introduced amino active sites. The enhanced adsorption capacity of Fe3O4@C@DETA for Cr(III) is 44.74 mg g-1 (at 25 °C and pH 3.0), which is due to the surface coordination with the newly introduced amino functional sites. The Cr(III)-EDTA anions as a whole was adsorbed through the electrostatic interaction with protonated amino species of the Fe3O4@C@DETA and have maximum adsorption capacity of 47.27 mg g-1 (at 25 °C and pH 3.0). The adsorption data of free and EDTA coordinated Cr(III) were followed the Langmuir equation, while the adsorption dynamics was well explained by pseudo second order model indicating the chemical nature of adsorption process. The higher concentration of Ca2+ ions in the wastewater compete for adsorption sites and inhibit the Cr(III) removal, while on other hand Ca2+ ions promotes the adsorption of Cr(III)-EDTA, because of electrostatic interaction with adsorbent active sits. Furthermore, the adsorbent can be easily separated by external magnetic field and regenerated in acidic solution. The adsorbent is stable, recyclable and have more than 75% regeneration efficiency and can be repeatedly used in the adsorption process.

From Octahedron Crystals to 2D Silicon Nanosheets: Facet-Selective Cleavage and Biophotonic Applications.

2D silicon nanosheets (SiNSs) are promising materials for biomedicine but facile synthesis of SiNSs remains a challenge. Herein, by means of a sulfur-iodine co-assisted chemical vapor transport method, octahedron silicon (oct-Si) crystals with fully exposed {111} planes are prepared as precursors for efficient synthesis of SiNSs by facet-selective exfoliation. The 13 nm thick SiNSs have good biocompatibility and the sharp Raman scattering signal facilitates intracellular Raman imaging upon exposure to a near-infrared (NIR) laser. Furthermore, the SiNSs have excellent NIR photothermal characteristics such as a large extinction coefficient of 11.3 L g-1 cm-1 and high photothermal conversion efficiency of 21.4% at 1064 nm. In vitro experiments demonstrate superior NIR-II photothermal therapeutic effects in killing cancer cells. Comparing to conventional methods, the novel facet-selective cleavage strategy is more controllable and environmentally friendly boding well for the fabrication of non-van der Waals 2D materials. The multimodal photonic behavior also suggests large potential of the SiNSs pertaining to integrated multi-NIR biophotonic techniques using single nanomaterials.