RESUMO
Chiral 3D perovskites pose challenges compared to lower-dimensional variants due to limited chiral organic cation options. Here, we present a universal and controlled method for synthesizing chiral 3D lead halide perovskites using organic amines or alcohols as chiral templates. Introducing these templates to PbCl2 in N,N-dimethylformamide (DMF) under acidic conditions induces the crystallization of R/S [DMA]PbCl3 (DMA = dimethylamine). The resulting structure aligns with the templates used, stemming from the helical Pb2Cl95- chain as verified by single-crystal X-ray diffraction. Furthermore, the chiral perovskite exhibits absorption and circular dichroism (CD) signals in the high-energy band, enabling the circularly polarized light (CPL) detection in the UV spectrum. A CPL detector constructed by this chiral perovskite demonstrates excellent performance, boasting an anisotropy factor for photocurrent (gIph) of 0.296. Our work not only introduces a novel and controllable method for crafting chiral perovskites but also opens new avenues for circularly polarized light detection.
RESUMO
An asymmetric structure is an important strategy for designing highly conductive molecular wires for a gap-fixed molecular circuit. As the conductance enhancement in the current strategy is still limited to about 2 times, we inserted a methylene group as a spacer in a conjugated structure to modulate the structural symmetry. We found that the conductance drastically enhanced in the asymmetric molecular wire to 1.5 orders of magnitude as high as that in the symmetric molecular wire. First-principles quantum transport studies attributed the effective enhancement to the synchronization of improved energy alignment and nearly symmetric coupling between the frontier orbitals and the electrodes.
RESUMO
Conventional fluorescent materials frequently exhibit narrow-band emissions with a small full width at half-maximum (fwhm) due to localized-state characteristics, but electroluminescence is less efficient owing to the utilization of only singlet excitons. In this work, taking advantage of naphthalimide (NAI)-acetylide derivatives with a rigid planar structure and localized transition characteristics, we elaborately designed two mononuclear Pt(II) complexes with weak double emissions of fluorescence and phosphorescence. Taking them as synthetic precursors, we prepared three PtAu2 heteronuclear clusters and successfully attained highly efficient narrow-band red phosphorescence with the fwhm below 30 nm. Both theoretical and experimental results suggest that the phosphorescence of PtAu2 clusters mainly originates from the naphthalimide-localized 3IL (intraligand) triplet state. Solution-processed organic light-emitting diodes (OLEDs) achieved highly efficient narrow-band red electroluminescence with an external quantum efficiency (EQE) of 16.7%. The CIE coordinates of the electroluminescence (0.69, 0.31) closely match the standard red emission for ultrahigh-definition display.
RESUMO
An accurate rule for predicting conductance is the cornerstone of developing molecular circuits and provides a promising solution for miniaturizing electric circuits. The successful prediction of series molecular circuits has proven the possibility of establishing a rule for molecular circuits under quantum mechanics. However, the quantitatively accurate prediction has not been validated by experiments for parallel molecular circuits. Here we used 1,3-dihydrobenzothiophene (DBT) to build the parallel molecular circuits. The theoretical simulation and single-molecule conductance measurements demonstrated that the conductance of the molecule containing one DBT is the unprecedented linear combination of the conductance of the two individual channels with respective contribution weights of 0.37 and 0.63. With these weights, the conductance of the molecule containing two DBTs is predicted as 1.81 nS, matching perfectly with the measured conductance (1.82 nS). This feature offers a potential rule for quantitatively predicting the conductance of parallel molecular circuits.
RESUMO
As the simplest oligomeric acceptors, dimerized acceptors (DAs) are easier to synthesize, and more importantly, they can retain good intermolecular interaction and photovoltaic properties of their parent small-molecule acceptors (SMAs). Nevertheless, currently most efficient DAs are derived from banana-shaped acceptors and they might suffer from inferior device stability with high diffusion coefficients. Herein, we design and synthesize two planar DAs (DMT-FH and DMT-HF) by bridging two linear-shaped M-series SMAs with a thiophene unit. The effects of fluorination position on the diffusion coefficients, power conversion efficiencies (PCEs) and stability of the DAs are systematically studied. Our results suggest that DMT-HF with fluorination on the ending indanone groups shows enhanced intermolecular interactions, improved PCE and stability compared with the counterpart (DMT-FH) with fluorination on the central indanone groups. Further optimization on the DMT-HF-based devices yields an outstanding PCE of 17.17%, which is the highest among all linear-shaped SMA-based DAs. Notably, with the low diffusion coefficient (3.36×10-24 cm2 s-1) of DMT-HF, the resulting device retains over 93% of the initial PCE after 5000 h of continuous heating at 85 oC, suggesting its excellent thermal stability. The results highlight the importance of intermolecular interaction and fluorination for achieving efficient and stable polymer solar cells.
RESUMO
Diradicaloids are generally high-energy molecules with open-shell configuration and are quite reactive. In this work, we report a feasible synthetic approach to attaining exceptionally stable copper(I) metallacyclopentadiene diradicaloids through ligand engineering. Copper(I)-hybrid cyclopentadiene diradicaloids 1c-6c that absorb intensely in visible regions were successfully prepared in stoichiometrical yields under UV light irradiation. The diradicaloids originate from the C-C bonding coupling of two side-by-side-arranged ethynyl groups in complexes 1-6 upon photocyclization. By rational selection of substituents in triphosphine ligands, we systematically modulate the kinetic behavior of diradicaloids 1c-6c in the thermal decoloration process. With precise ligand design, we are able to obtain exceptionally stable copper(I)-hybrid cyclopentadiene diradicaloids with a half-life as long as ca. 40 h in CH2Cl2 solution at ambient temperature. As demonstrated by electron paramagnetic resonance (EPR) and variable-temperature magnetic studies, the diradicaloids manifest a singlet ground state, but they are readily populated to a triplet excited state through thermal activation in view of a small singlet-triplet energy gap of -0.39 kcal mol-1. The diradicaloids show two-step quasi-reversible reduction waves at about -0.5 and -1.0 V ascribed to successive one-electron-accepting processes, coinciding perfectly with the characteristics of diradicals.
RESUMO
Reaction of [Au(tht)2](ClO4) (tht = tetrahydrothiophene), [Cu(CH3CN)4](ClO4), 3,6-di-tert-butyl-1,8-diethynyl-9H-carbazole (H3decz), and bis(2-diphenylphosphinophenyl)ether (POP) in the presence of triethylamine (NEt3) gave the cluster complex Au4Cu2(decz)2(POP)2 as yellow crystals. As revealed by X-ray crystallography, the Au4Cu2 cluster exhibits scissor-like structure sustained by two decz and two POP ligands and stabilized by Au-Cu and Au-Au interactions. The Au4Cu2 cluster shows bright yellow to orange photoluminescence upon irradiation at >300 nm, arising from 3[π (decz)â5d (Au)] 3LMCT (ligand-to-metal charge transfer) and 3[πâπ* (decz)] 3IL (intraligand) triplet states as revealed by theoretical and computational studies. When it is mechanically ground, reversible phosphorescence conversion from yellow to red is observed owing to more compact molecular packing and thus stronger intermetallic interaction. Variable-temperature luminescence studies reveal that it displays distinct red-shifts of the emission whether the temperature is elevated or lowered from ambient temperature, suggestive of exceptional thermochromic phosphorescence characteristics.
RESUMO
An in-depth study on a stimuli-responsive tetranuclear cuprous luminescent complex is reported and gives new insights into the origin and possible use of the observed stimuli-responsive luminescence. Its crystalline polymorphs with two different shapes are obtained by using different crystallization solvents and show distinct emissions, with one being blue emissive and the other being yellow emissive. Upon grinding, only the blue-emitting polymorph has a marked change in the emission color from blue to yellow, and its ground sample exhibits a yellow emission similar to that of the yellow-emitting polymorph. Interestingly, the yellow-emitting polymorph after exposure to acetone vapor can emit a blue emission and display luminescence mechanochromism similar to that of the blue-emitting polymorph. Single-crystal structural analyses of the two different polymorphs reveal the relationship between the mechanochromic luminescence and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit and intramolecular "pyridyl/phenyl" π···π interactions, supported as well by their PXRD, FT-IR, TGA, and PL studies in various states and by TD-DFT analyses. The results demonstrate the different roles of switchable intramolecular π···π interactions and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit in this stimuli-responsive luminescence and potential applications of such stimuli-responsive luminescence in optical sensing and anticounterfeiting encryption technologies and deepen the understanding of such stimuli-responsive luminescence originating from switchable intramolecular π···π interactions. In addition, it is clearly suggested that the rational utilization of switchable intramolecular π···π interactions is a feasible route for developing stimuli-responsive intelligent luminescent materials and devices.
RESUMO
Unveiling the internal dynamics of rotation in molecular machine at single-molecule scale is still a challenge. In this work, three crank-shaped molecules are elaborately designed with the conformational flipping between syn and anti fulfilled by two naphthyl groups rotating freely along 1,3-butadiynyl axis. By investigating the single-molecule conductance using scanning tunnelling microscope break junction (STM-BJ) technique and theoretical simulation, the internal rotation of these crank-shaped molecules is well identified through low and high conductance corresponding to syn- and anti-conformations. As demonstrated by theoretically computational study, the orbital energy changes with the conformational flipping and influences the intraorbital quantum interference, thus eventually modulating the single-molecule conductance. This work demonstrates single-molecule conductance measurement to be a rational approach for characterizing the internal rotation of molecular machines.
Assuntos
Conformação Molecular , Nanotecnologia , Rotação , Simulação por ComputadorRESUMO
Two heteroctanuclear Au4Ag4 cluster complexes of 4,5-diethynylacridin-9-one (H2L) were prepared through the self-assembly reactions of [Au(tht)2](CF3SO3), Ag(tht)(CF3SO3), H2L and PPh3 or PPh2Py (2-(diphenylphosphino)pyridine). The Au4Ag4 cluster consists of a [Au4L4]4- and four [Ag(PPh3)]+ or [Ag(PPh2Py)]+ units with Au4L4 framework exhibiting a twisted paper clip structure. In CH2Cl2 solutions at ambient temperature, both compounds show ligand fluorescence at ca. 463 nm as well as phosphorescence at 650 nm for 1 and 630 nm for 2 resulting from admixture of 3IL (intraligand) of L ligand, 3LMCT (from L ligand to Au4Ag4) and 3MC (metal-cluster) triplet states. Crystals or crystalline powders manifest bright yellow-green phosphorescence with vibronic-structured emission bands at 530 (568sh) nm for complex 1 and 536 (576sh) nm for complex 2. Upon mechanical grinding, yellow-green emission in the crystalline state is dramatically converted to red luminescence centered at ca. 610 nm with a drastic redshift of the emission after crystal packing is destroyed.
Assuntos
Luminescência , LigantesRESUMO
As low-dimensional lead-free hybrids with higher stability and lower toxicity than those of three-dimensional lead perovskites, organic antimony(III) halides show great application potential in opt-electronic field owing to diverse topologies along with exceptional optical properties. We report herein an antimony(III) hybrid (MePPh3 )2 SbCl5 with a zero-dimensional (0D) structure, which exhibits brilliant orange emission peaked at 593â nm with near-unity photoluminescent quantum yield (99.4 %). The characterization of photophysical properties demonstrates that the broadband emission with a microsecond lifetime (3.24â µs) arises from self-trapped emission (STE). Electrically driven organic light-emitting diodes (OLEDs) based on neat and doped films of (MePPh3 )2 SbCl5 were fabricated. The doped devices show significant improvement in comparison to non-doped OLEDs. Owing to the much improved surface morphology and balanced carrier transport in light-emitting layers of doped devices, the peak luminance, current efficiency (CE) and external quantum efficiency (EQE) are boosted from 82â cd m-2 to 3500â cd m-2 , 1.1â cd A-1 to 6.8â cd A-1 , and 0.7 % to 3.1 % relative to non-doped devices, respectively.
RESUMO
Nonfullerene acceptors (MQ3, MQ5, MQ6) are synthesized using asymmetric and symmetric ladder-type heteroheptacene cores with selenophene heterocycles. Although MQ3 and MQ5 are constructed with the same number of selenophene heterocycles, the heteroheptacene core of MQ5 is end-capped with selenophene rings while that of MQ3 is flanked with thiophene rings. With the enhanced noncovalent interaction of Oâ â â Se compared to that of Oâ â â S, MQ5 shows a bathochromically shifted absorption band and greatly improved carrier transport, leading to a higher power conversion efficiency (PCE) of 15.64 % compared to MQ3, which shows a PCE of 13.51 %. Based on the asymmetric heteroheptacene core, MQ6 shows an improved carrier transport induced by the reduced π-π stacking distance, related with the increased dipole moment in comparison with the nonfullerene acceptors based on symmetric cores. MQ6 exhibits a PCE of 16.39 % with a VOC of 0.88â V, a FF of 75.66 %, and a JSC of 24.62â mA cm-2 .
RESUMO
The reaction of 3,6-ditert-butyl-1,8-bis(diphenylphosphino)-9-methyl-9H-carbazole (L) with CuBr resulted in the isolation of tetranuclear copper(I) complex Cu4Br4L2 as two colorless crystal morphs, i.e., green-emitting 1G and yellow-emitting 1Y. As demonstrated by X-ray crystallography, the Cu4Br4 moiety in both 1G and 1Y adopts the same chair conformations. When L is bonded perpendicularly to the Cu4 plane, 1G with green emission is obtained, while it gives a yellow emission of 1Y once the L is parallelly bonded to Cu4 plane. Theoretical computational studies suggest that the variation in ligand orientation results in a different degree of structural distortion in triplet state and thus different luminescent energy. Particularly, 1Y undergoes dramatic structural distortion from the ground (S0) to triplet excied state (T1). Interestingly, 1G can be converted into 1Y upon exposed to saturated hexane vapor, which would return to 1G upon exposure to acetonitrile vapor. As demonstrated experimentally and theoretically, the reversible luminescence transformation between 1G and 1Y is ascribed to the variation of ligand L orientations.
RESUMO
Mechanochromic luminescence materials have attracted rapidly growing interest. Nevertheless, the designed synthesis of such materials remains a challenge, and there have been few examples based on weak intramolecular interactions. Herein, we report a new approach for preparing mechanochromic luminescence materials of Cu(I) complexes, i.e., constructing a photoluminescence system that bears a large coplanar multinuclear Cu(I) unit showing weak intramolecular π···π interactions with the planar rings of the coordinated ligands in the molecule. Using it, a series of novel mechanochromic luminescent tetranuclear Cu(I) complexes have been successfully designed and synthesized. As revealed by single-crystal X-ray crystallography, these Cu(I) complexes share an identical {Cu4[µ3-η2(N,N),η1(N),η1(N)-pyridyltetrazole]2}2+ planar fragment whose coplanar pyridyl rings exhibit weak intramolecular π···π interactions with the phenyl rings of the coordinated phosphine ligands in the molecule. All of these Cu(I) complexes exhibit reversible mechanochromic luminescence, which can be attributed to the change in the rigidity of the molecular structure resulting from the disruption and restoration of intramolecular π···π interactions between the pyridyl and phenyl rings triggered by grinding and CH2Cl2 vapor, as supported by powder X-ray diffraction and Fourier transform infrared spectrometry. In addition, the results might provide a new route for developing mechanochromic luminescence materials of Cu(I) complexes for intelligent responsive luminescent devices.
RESUMO
A new sublimable dicopper(I) complex bearing 1,2-bis(diphenylphosphino)ethane and 5-trifluoromethyl-3-(2'-pyridyl)pyrazolate ligands has been designed and synthesized, and its crystalline solvated and nonsolvated compounds have also been obtained and investigated. It is shown that only the crystalline solvated compound exhibits reversible and selective luminescence vapochromism, arising from its unique "pyridyl/CH2Cl2/pyridyl" organic sandwich-like stacking arrangement revealed by X-ray crystallography, as supported by time-dependent density functional theory calculations. Additionally, the neutral Cu(I) complex has excellent thermal stability and sublimability, good solid-state luminescence properties, and TADF character, and it is suggested to be a good emitter for vapor-deposited organic light-emitting diodes.
RESUMO
Dinuclear Cu(I) complexes bearing hexadentate, macrocyclic N-heterocyclic carbene (NHC) ligands, [Cu2(L1)(CH3CN)][PF6]2 (1) and [Cu2(L2)(CH3CN)]2[Cu2(L2)(CH3CN)2][PF6]6 (2), have been synthesized by the reactions of [H4L][PF6]4 (L = L1, L2) with excess Cu2O in acetonitrile. Crystallizations of the heat-treated samples of 1 and 2 from acetone/methanol/ether or CH3NO2/ether result in [Cu2(L1)][PF6]2 (3) and [Cu2(L2)][PF6]2 (4). Complexes 1-4 are emissive with luminescent maxima at 464, 472, 540, and 488 nm in the solid state, respectively. The origin of the red shift of the emission maximum of 3 relative to the other three complexes has been studied by theoretical calculations, showing the cuprophilic interactions in the excited state of 3. The mechanochromic luminescent properties of 1-4 have been studied. After grinding in a mortar, a significant emission color change is found with a red shift of 98 nm for 1, 82 nm for 2, 20 nm for 3, and 64 nm for 4, respectively. These mechanochromic transformations are found to be a crystalline-to-amorphous conversion, which can be reverted by adding drops of the organic solvent or recrystallization. The possible correlations between the luminescent properties and structural modifications such as Cu···Cu distances are discussed.
RESUMO
An asymmetric bis(dithienylethene-acetylide) ruthenium(II) complex trans-Ru(dppe)2(L1o)(L2o) (1oo) incorporating two different dithienylethene-acetylides (L1o and L2o) was designed to modulate multistate photochromism in view of the well separated ring-closing absorption bands between L1o and L2o. Upon irradiation with appropriate wavelengths of light, complex 1 undergoes stepwise photocyclization and selective photocycloreversion to afford four states (1oo, 1co, 1oc, and 1cc). As a contrast, symmetric complexes trans-Ru(dppe)2(L1o)2 (2oo) and trans-Ru(dppe)2(L2o)2 (3oo) with two identical dithienylethene-acetylides were synthesized, and the corresponding photochromic behavior was investigated. The photochromic properties of the oxidized species (1oo+/1co+/1oc+/1cc+, 2oo+/2co+/2cc+, and 3oo+/3co+/3cc+) were also investigated. The ring-closing absorption bands of one-electron oxidized species 1oo+, 2oo+, and 3oo+ show obvious blue shifts relative to those of 1oo, 2oo, and 3oo, respectively. The ring-closing absorption bands in both neutral and oxidized species grow progressively following oo â oc/co â cc and oo+ â oc+/co+ â cc+. As revealed by spectroscopic, electrochemical, and computational studies, complex 1 displays eight switchable states through stepwise photocyclization, selective cycloreversion, and a reversible redox process.
RESUMO
1,2-Bis[[(diphenylphosphino)methyl](phenyl)phosphino]ethane (dpmppe) was prepared as a new tetraphosphine, and the corresponding rac and meso stereoisomers were successfully separated in view of their solubility difference in acetone. The substitution of PPh3 into Pt(PPh3)2(C≡CR)2 (R = aryl) with rac- or meso-dpmppe gives Pt(rac-dpmppe)(C≡CR)2 or Pt(meso-dpmppe)(C≡CR)2, respectively. Using Pt(rac-dpmppe)(C≡CR)2 or Pt(meso-dpmppe)(C≡CR)2 as a precursor, PtAg2 heterotrinuclear cluster complexes were synthesized and characterized by X-ray crystallography. Depending on the conformations of tetraphosphine, the structures of PtAg2 complexes supported with rac- and meso-dpmppe are quite different. The higher molecular rigidity of rac-dpmppe-supported PtAg2 complexes results in stronger phosphorescent emission than that of PtAg2 species with meso-dpmppe. The high phosphorescent quantum yields (as high as 90.5%) in doping films warrant these PtAg2 complexes as excellent phosphorescent dopants in organic light-emitting diodes (OLEDs). The peak current and external quantum efficiencies in solution-processed OLEDs are 61.0 cd A-1 and 18.1%, respectively. Electroluminescence was elaborately modulated by modifying the substituent in aromatic acetylide and the conformations in tetraphosphine so as to achieve cyan, green, green-yellow, yellow, and orange-red emission.
RESUMO
A new series of bimetallic Cu(I) complexes 1-5 triply bridged by a monoanionic or charge-neutral functionalized 3-(2'-pyridyl)-1,2,4-triazole in a µ-η1(N),η2(N,N) tridentate binding mode and two bis(diphenylphosphino)methane (dppm) ligands have been synthesized. Complexes 1-5 are singly or doubly charged dinuclear Cu(I) species with an eight-membered Cu2C2P4 ring of {Cu(µ-dppm)2Cu} unit, in which 3 and 4 adopt the boat-boat conformation, while 1, 2, and 5 display the chair-boat form. In these dimeric copper(I) complex cations, one of the two Cu(I) ions is four-coordinated, in a highly distorted N2P2 tetrahedral environment and the other is three-coordinated, in a distorted NP2 trigonal planar arrangement. All these Cu(I) complexes exhibit a comparatively weak low-energy absorption in CH2Cl2 solution, ascribed to the charge-transfer transitions with appreciable 1MLCT contribution, as suggested by time-dependent density functional theory (TDDFT) analyses. Complexes 1-5 display good emission properties in both solution and solid states at ambient temperature, which are well-modulated via structural modification of 3-(2'-pyridyl)-1,2,4-triazole, including the alteration of the substituent type (-CF3, -H, -CH3, and -C(CH3)3) and position (ortho-, meta-, and para-position). Furthermore, the variation of the substituent (-CF3 and -C(CH3)3) on the 5-site of the 1,2,4-triazolyl ring markedly influences the proton activity of the 1,2,4-triazolyl-NH, thus leading to the formation of both singly and doubly charged bimetallic Cu(I) species regulated by the NHâ¯ââ¯N- conversion, resulting from NH deprotonation of the 1,2,4-triazolyl ring.
RESUMO
Pt(II) metal complexes [Pt(C^C)(X^X)] comprising three functional dianionic azolate chelates (X^XH2: bipzH2 = 5,5'-di(trifluoromethyl)-3,3'-bipyrazole, bitzH2 = 5,5'-di(trifluoromethyl)-3,3'-bi-1,2,4-triazole, and phpzH2 = 3-(trifluoromethyl)-5-(4-(trifluoromethyl)phenyl)-1H-pyrazole), together with three different charge-neutral dicarbene chelates (i.e., C^C = 1,1'-methylene bis(3-methyl-imidazol-2-ylidene), 1,1'-methylene bis(3-isopropyl-imidazol-2-ylidene), and 1,1'-(propane-1,3-diyl) bis(3-isopropyl-imidazol-2-ylidene), were synthesized and found to show bright solid-state emission depending on the associated X^X and C^C chelates. Pt(II) complexes 1a, 2, and 6 were examined by X-ray diffraction studies, confirming the square-planar skeleton. These Pt(II) metal complexes are found to be nonemissive in degassed solution at RT. The photophysical measurements as neat powder reveals emission maxima ranging from purple to sky blue emission and with high quantum yields for the majority of them. (Time-dependent) density functional theory (DFT/TD-DFT) calculations were executed to elucidate the emission process that was predominated by the combined3LLCT/(3)LMCT/(3)IL character, where LLCT and LMCT and IL stand for ligand-to-ligand charge transfer, ligand-to-metal charge transfer, and intraligand ππ* transition processes. Organic light-emitting devices comprising complex 5a achieved high efficiency (8.9%, 19.4 cd·A(-1), 22.5 lm·W(-1)) with a sky blue emission showing CIEx,y coordinates of (0.18, 0.32).