A simple method to improve the antibiotic elution profiles from polymethylmethacrylate bone cement spacers by using rapid absorbable sutures.

OBJECTIVE: Antibiotic-loaded bone cement beads and spacers have been widely used for orthopaedic infection. Poor antibiotic elution is not capable of eradicating microbial pathogens and could lead to treatment failure. The elution profiles differ among different cement formulations. Although Simplex P cement has the least release amount, it is widely used due to its ready availability. Previous methods aiming to improve the elution profiles were not translated well to clinical practice. We sought to address this by using easily available materials to improve the elution profile of antibiotics from PMMA, which allows clinicians to implement the method intraoperatively. METHODS: Vancomycin was mixed with Simplex P cement. We used Vicryl Rapide sutures to fabricate sustained-release cement beads by repetitively passing the sutures through the beads and/or mixing suture segments into the cement formulation. Vancomycin elution was measured for 49 days. The mechanism of antibiotic release was observed with gross appearance and scanning electron microscopic images. The antimicrobial activities against MRSA were tested using an agar disk diffusion bioassay. RESULTS: Passing Vicryl Rapide sutures through cement beads significantly improved the elution profiles in the 7-week period. The increased ratios were 9.0% on the first day and 118.0% from the 2nd day to the 49th day. Addition of suture segments did not increase release amount. The Vicryl Rapide sutures completely degraded at the periphery and partially degraded at the center. The antibiotic particles were released around the suture, while antibiotic particles kept densely entrapped in the control group. The antimicrobial activities were stronger in passing suture groups. CONCLUSION: Passing fast absorbable sutures through PMMA cement is a feasible method to fabricate sustained-release antibiotic bone cement. Intra-cement tunnels can be formed, and the effect can last for at least 7 weeks. It is suitable for a temporary spacer between two stages of a revision surgery.

Finite element analysis after rod fracture of the spinal hybrid elastic rod system.

BACKGROUND: The spinal hybrid elastic (SHE) rod dynamic stabilization system can provide sufficient spine support and less adjacent segment stress. This study aimed to investigate the biomechanical effects after the internal fracture of SHE rods using finite element analysis. METHODS: A three-dimensional nonlinear finite element model was developed. The SHE rod comprises an inner nitinol stick (NS) and an outer polycarbonate urethane (PCU) shell (PS). The fracture was set at the caudal third portion of the NS, where the maximum stress occurred. The resultant intervertebral range of motion (ROM), intervertebral disc stress, facet joint contact force, screw stress, NS stress, and PCU stress were analyzed. RESULTS: When compared with the intact spine model, the overall trend was that the ROM, intervertebral disc stress, and facet joint force decreased in the implanted level and increased in the adjacent level. When compared with the Ns-I, the trend in the Ns-F decreased and remained nearly half effect. Except for torsion, the PS stress of the Ns-F increased because of the sharing of NS stress after the NS fracture. CONCLUSIONS: The study concluded the biomechanical effects still afford nearly sufficient spine support and gentle adjacent segment stress after rod fracture in a worst-case scenario of the thinnest PS of the SHE rod system.

A self-assembled layer-by-layer surface modification to fabricate the neuron-rich model from neural stem/precursor cells.

BACKGROUND/PURPOSE: In vitro neural cell-based models have been widely used to mimic the in vivo neural tissue environments and quantitatively understand the effects of pharmaceutical molecules on neural diseases. Recently, several biomimetic neural tissue models have been widely developed by using biomaterials or surface modification. However, the complex protocols of material synthesis or surface modification lack an easy execution to fabricate the neuron favorite environment. METHODS: In this study, we utilized a layer-by-layer technique as a surface modification method for regulating the behaviors of neural stem/precursor cells (NSPCs) on material surfaces. Polyelectrolyte multilayers (PEMs) via alternate deposition of poly (allylamine hydrochloride) (PAH) and poly (sodium-4-styrenesulfonate) (PSS) were used to culture NSPCs. After incubation for 7 days, the neuronal differentiation of NSPCs and synapse function of differentiated neurons were identified by immunocytochemistry for lineage specific markers. RESULTS: Compared with the only PAH film, the PSS-ending film (neuron-rich model) was shown to significantly promote differentiation of NSPCs into neurons (more than 50%), form a neuronal network structure; and differentiated neurons exhibiting functional synaptic activity. CONCLUSION: This study shows that the PEMs provided an easily alternative approach to modify the surface properties; and might be a method to obtain a neuron-rich model for the biological/pharmaceutical applications.

The correlation of sagittal osteotomy inclination and the anteroposterior translation in medial open-wedge high tibial osteotomy-one of the causes affecting the patellofemoral joint?

PURPOSE: For opening-wedge high tibial osteotomy, previous studies have shown that most osteotomies were anterior-inclined. The purpose of this study was to determine the effect of sagittal osteotomy inclination on the anteroposterior translation of osteomized fragments and discuss its possible impact on the patellofemoral joint. METHODS: We retrospectively measured the angle between the joint line and the sagittal osteotomy line. We also evaluated the anteroposterior translation of osteomized fragments by measuring the distance from the most posterior point of the tibial plateau to the tibial tuberosity and the anterior cortical line. Correlation between the sagittal osteotomy inclination and the anteroposterior translation of fragments was analyzed. RESULTS: The mean sagittal osteotomy inclination was 6.3 ± 8.4° anteriorly to the joint line and 82% of osteotomies were anterior-inclined. The anteroposterior translation of the osteomized fragments was moderately correlated to the sagittal inclination. Anterior-inclined osteotomy tends to result in the anterior translation of the proximal fragment. CONCLUSION: High rates of anterior-inclined osteotomy have been described previously as well as in this study. Anterior-inclined osteotomy tends to result in the anterior translation of the proximal fragment. This may result in increased vertical vector force onto the patellofemoral joint, which further accelerates patellofemoral joint degeneration. Therefore, surgeons should attempt to perform parallel osteotomy or avoid anterior displacement of the proximal fragment if there is concern of anterior-inclined osteotomy.

Amniotic membrane and adipose-derived stem cell co-culture system enhances bone regeneration in a rat periodontal defect model.

BACKGROUND/PURPOSE: Periodontal disease is a chronic inflammatory process that potentially leads to alveolar bone destruction and tooth loss. Tissue engineering combined with stem cell therapy is a potential effective treatment for periodontal bone loss. Amniotic membrane (AM) is a potential scaffold enriched with multiple growth factors. It has the effects of anti-inflammation, antiangiogenesis, and immunosuppression. Herein, we used adipose-derived stem cells (ADSCs) and an AM co-cultured system to study bone regeneration in a rat periodontal defect model in vivo. METHODS: Human ADSCs were isolated from the infrapatellar fat pad, and characterized by flow cytometry, reverse transcription-polymerase chain reaction, and multipotent differentiation assays. The co-culture system was applied in the periodontal two-wall osseous defect in a rat model, and computed tomography was used to measure the effect. RESULTS: Human ADSCs isolated from the infrapatellar fat pad showed spindle-like morphology. Flow cytometry results demonstrated that ADSCs expressed a high level of CD90 and CD105, but not CD31, CD34, and CD45. ADSCs strongly expressed stemness genes, including SOX2, OCT4, NANOG, and KLF4 on different passages. Furthermore, ADSCs were able to differentiate into osteogenic, chondrogenic, and adipogenic cells. In the periodontal osseous defect rat model, ADSCs and the AM co-culture system significantly increased bone regeneration. CONCLUSION: This study provides the basis for using ADSCs with an AM co-culture system as stem cell therapy and scaffold transplantation in clinical periodontology.

Neuromechanical characteristics in the knees of patients who had primary conservative treatment for a torn cruciate ligament and reconstruction afterward.

BACKGROUND/PURPOSE: To compare the neuromechanical characteristics and subjective outcomes for knees of patients with a cruciate ligament tear and reconstruction with those for knees of controls at three time intervals, and to determine correlations between the characteristics and subjective outcomes. METHODS: Ten participants with a cruciate ligament tear and at least a 12-week conservative treatment prior to ligament reconstruction were prospectively measured prior to and 3 months and 6 months after surgery. Ten healthy individuals were recruited as controls. Questionnaire surveys regarding the injured knee were conducted, as were bilateral measurements of root mean square electromyography (EMG), the rate of EMG rise, the median frequency in the vastus medialis of the quadriceps muscles and antagonist coactivation from the semitendinosus muscle, and force capacities, including peak torque, rate of force development, and total works of the knee extension. Correlations between the EMG variables (of the vastus medialis and semitendinosus) and the force capacities, and between the EMG variables and the knee injury and osteoarthritis outcome scores (KOOS), and between force capacities and the KOOS were assessed in the participants with a ligament reconstruction. RESULTS: Pre- and postoperative results of EMG variable and force capacities were lower in both knees of the experimental group participants than in the control group participants (all p < 0.05). Correlations between EMG and force capacities, and between these parameters and the KOOS were found. CONCLUSION: There were bilateral neuromechanical defects in the knees of the participants who had undergone conservative treatment as well as reconstruction after a cruciate ligament tear.

Simvastatin inhibits cysteine-rich protein 61 expression in rheumatoid arthritis synovial fibroblasts through the regulation of sirtuin-1/FoxO3a signaling.

OBJECTIVE: To examine the role of sirtuin-1 (SIRT-1)/FoxO3a in the expression of cysteine-rich protein 61 (CYR-61) in rheumatoid arthritis synovial fibroblasts (RASFs) and the influence of simvastatin on this pathway, and to determine the relationship between disease progression and FoxO3a/CYR-61 signaling in synovial fibroblasts in vivo using a rat model of collagen-induced arthritis (CIA). METHODS: In RASFs, the expression of CYR-61 and SIRT-1, the localization of FoxO3a in the nucleus/cytoplasm, and the phosphorylation/acetylation of FoxO3a were examined by Western blotting. Secretion of CCL20 was assessed by enzyme-linked immunosorbent assay. Promoter activity of the Cyr61 gene was evaluated by luciferase assay, with or without forced expression of FoxO3a and SIRT-1 by lentiviral transduction. FoxO3a-Cyr61 promoter interaction was examined by chromatin immunoprecipitation. In rats with CIA, the expression of CYR-61 and phosphorylated FoxO3a in synovial fibroblasts was examined by immunohistochemistry. RESULTS: In RASFs, simvastatin suppressed the tumor necrosis factor α (TNFα)-induced production of CYR-61 and CCL20. Nuclear levels of FoxO3a were decreased after TNFα stimulation of RASFs, and forced expression of FoxO3a reversed the inductive effects of TNFα on CYR-61. Simvastatin inhibited the nuclear export, phosphorylation, and acetylation of FoxO3a and maintained its binding to the Cyr61 promoter. Forced expression of SIRT-1 in RASFs led to decreased levels of CYR-61 and deacetylation of FoxO3a. Following treatment with simvastatin, the expression of SIRT-1 was up-regulated and SIRT-1/FoxO3a binding was enhanced in RASFs. In rats with CIA, intraarticular injection of simvastatin alleviated arthritis and suppressed CYR-61 expression and FoxO3a phosphorylation in synovial fibroblasts. CONCLUSION: CYR-61 is important in the pathogenesis of RA, and SIRT-1/FoxO3a signaling is crucial to induction of CYR-61 in RASFs. Simvastatin plays a beneficial role in inflammatory arthritis through its up-regulation of SIRT-1/FoxO3a signaling in synovial fibroblasts. Continued study of the pathways linking sirtuins, FoxO proteins, and the inflammatory responses of RASFs may provide new insights into the pathophysiology of RA.

Effect of Chitosan on Synovial Membrane Derived Cells and Anterior Cruciate Ligament Fibroblasts.

Previously, chitosan reduces the senescence-related phenotypes in human foreskin fibroblasts through the transforming growth factor beta (TGF-ß) pathway, and enhances the proliferation and migration capabilities of these cells are demonstrated. In this study, we examined whether the senescence-delaying effect of chitosan could be applied to primary knee-related fibroblasts, such as human synovial membrane derived cells (SCs) and anterior cruciate ligament fibroblasts (ACLs). These two types of cells were obtained from donors who needed ACL reconstruction or knee replacement. We found that chitosan treatment effectively reduced aging-associated ß-galactosidase (SA-ß-gal)-positive cells, downregulated the expression of senescence-related proteins pRB and p53, and enhanced the 5-bromo-2'-deoxyuridine (BrdU) incorporation ability of SCs and ACLs. Moreover, chitosan could make SCs secret more glycosaminoglycans (GAGs) and produce type I collagen. The ability of ACLs to close the wound was also enhanced, and the TGF-ß and alpha smooth muscle actin (αSMA) protein expression decreased after chitosan treatment. In summary, chitosan not only delayed the senescence but also enhanced the functions of SCs and ACLs, which is beneficial to the application of chitosan in cell expansion in vitro and cell therapy.

IL-6 induces periostin production in human ACL remnants: a possible mechanism causing post-traumatic osteoarthritis.

OBJECTIVE: Perostin (POSTN) and IL-6 consistently elevated after ACL injury, and ACL has been proposed as the major source of POSTN. However, there is a lack of evidence whether IL-6 induces ACL remnants to produce POSTN. This study aimed to investigate the effect of IL-6 on POSTN production in ACL fibroblasts, which may help us understand more about the mechanism of PTOA after ACL injury and ACL reconstruction. METHODS: ACL remnants were harvested from 27 patients undergoing ACL reconstruction. Quantitative real-time polymerase chain reaction (PCR) was performed to examine the POSTN gene expression of ACL fibroblasts after treatment of different concentrations of IL-6. The POSTN protein production of ACL fibroblasts was determined using western blot analysis. The blockers of possible signaling pathways, including PI3K/Akt, Ras/MAPK, and JAK/STAT pathways, were added to test whether the effect of IL-6 on ACL fibroblast could be attenuated. ACL fibroblast and chondrocyte co-culture was carried out to determine the influence of ACL and IL-6 on chondrocytes. RESULTS: Quantitative real-time PCR showed that IL-6 time-dependently and dose-dependently increased POSTN gene expression of ACL fibroblast. Western blot analysis also revealed that IL-6 dose-dependently induced POSTN protein production. Regarding the chronicity of ACL injury, the POSTN protein production was comparable between ACL remnants which were derived within 3 months of injury and at least 6 months after injury. PI3K/Akt blockers could attenuate the effect of IL-6 on ACL remnants, whereas Ras/MAPK and JAK/STAT did not decrease POSTN production. The coexistence of ACL and IL-6 induced more MMP-13 and ADAMTS-4 by chondrocytes. CONCLUSIONS: IL-6 induced ACL remnants to produce POSTN. This effect could be attenuated by the PI3K/Akt blocker. Coexistence of IL-6 and ACL remnants may accelerate post-traumatic arthritis.

The Outcome of under 10 mm Single-Incision Surgery Using a Non-Specialized Volar Plate in Distal Radius Fractures: A Retrospective Comparative Study.

BACKGROUND: The distal radius fracture is a common orthopedic injury. We aimed to share the surgical steps and investigate the outcomes of treating distal radius fractures with wounds ≤10 mm using a globally accessible locking plate. METHODS: We collected 46 patients who underwent surgery via a <10 mm wound, with a control group consisting of 40 patients who underwent conventional procedures. Both groups were treated using the same volar plate. We compared the radiographic reduction quality, including volar tilt angle, radial inclination angle, and ulna variance. Additionally, clinical outcomes, such as pain assessed using VAS, Q-Dash score, and PRWE, were evaluated. Patient satisfaction with the wound was also analyzed. The follow-up time for the clinical outcomes was 24.2 ± 13.47 months. RESULTS: There were no differences in the quality of reduction in parameters such as the volar tilt angle (p = 0.762), radial inclination angle (p = 0.986), and ulna variance (p = 0.166). Both groups exhibited comparable results in pain VAS (p = 0.684), Q-Dash score (p = 0.08), and PRWE (p = 0.134). The ≤10 mm incision group displayed an increase in satisfaction with the wound (p < 0.001). CONCLUSIONS: Treating distal radius fractures with a <10 mm wound using a non-specialized locking plate is a feasible approach. It does not compromise the quality of fracture reduction or functional scores and improves wound satisfaction.

Validation of the Efficacy of Ultrasound Speckle Tracking in Measuring Tendon Gliding After Finger Flexor Tendon Repair.

OBJECTIVE: Restricted tendon gliding is commonly observed in patients after finger flexor tendon (FFT) repair. The study described here was aimed at quantifying the amount of FFT gliding to evaluate the recovery of post-operative tendons using a 2-D radiofrequency (RF)-based ultrasound speckle tracking algorithm (UST). METHODS: Ex vivo uniaxial tensile testing of porcine flexor tendons and in vivo isometric testing of human FFT were implemented to verify the efficacy of UST beforehand. The verified UST was then applied to the patients after FFT repair to compare tendon gliding between affected and healthy sides and to investigate its correlation with the joint range of motion (ROM). RESULTS: Excellent validity was confirmed with the average R2 value of 0.98, mean absolute error of 0.15 ± 0.08 mm and mean absolute percentage error of 5.19 ± 2.43% between results from UST and ex vivo testing. The test-retest reliability was verified with good agreement of ICC (0.90). The affected side exhibited less gliding (p = 0.001) and smaller active ROM (p = 0.002) than the healthy side. Meanwhile, a significant correlation between tendon gliding and passive ROM was found only on the healthy side (ρ = 0.711, p = 0.009). CONCLUSION: The present study provides a promising protocol to evaluate post-operative tendon recovery by quantifying the amount of FFT gliding with a validated UST. FFT gliding in patients with different levels of ROM restriction should be further explored for categorizing the severity of tendon adhesion.

Epigallocatechin-3-gallate diminishes cytokine-stimulated Cyr61 expression in human osteoblastic cells: a therapeutic potential for arthritis.

OBJECTIVE: To assess the effects of epigallocatechin-3-gallate (EGCG) on cytokine-induced Cyr61 synthesis in human osteoblastic cells and the associated signalling pathways. The therapeutic effect of EGCG on CIA in rats was also studied. METHODS: The expression of Cyr61 and NF-κB pathway molecules was examined by western blotting. CCL2 expression was assessed by northern blotting and ELISA. Interaction between NF-κB and Cyr61 promoter was evaluated by electrophoretic mobility shift assay. In rat CIA, osteoblastic expression of Cyr61 was examined by immunohistochemistry and disease progression was assessed by clinical, radiographic and histological examinations. RESULTS: EGCG inhibited Cyr61 expression stimulated by cytokines in primary human osteoblasts and human osteoblastic cell line U2OS. In U2OS, oncostatin M (OSM) induced IκB-α degradation through the mTOR/rictor/Akt pathway, and EGCG attenuated the action. Electrophoretic mobility shift assay revealed that the OSM-enhanced NF-κB/DNA binding was reduced by EGCG, possibly through abrogating nucleus localization of p65 and p50. Cyr61 enhanced OSM-induced expression of CCL2. Moreover, EGCG diminished OSM-stimulated CCL2 expression at least partially via suppressing Cyr61 induction. Co-distribution of CD68(+) macrophages and Cyr61(+) osteoblasts in osteolytic areas was obvious in the CIA model. Clinical, radiographic and immunohistochemical analyses revealed that administration of EGCG markedly diminished the severity of CIA, macrophage infiltration, and the number of Cyr61-synthesizing osteoblasts. CONCLUSION: By modulating the mTOR/rictor/Akt/NF-κB pathway, EGCG attenuated Cyr61 production in osteoblastic cells and in turn diminished macrophage chemotaxis. Our data support the therapeutic potential of EGCG on arthritis.

Cognitive stimulation during hospitalization improves global cognition of older Taiwanese undergoing elective total knee and hip replacement surgery.

AIM: This article is a report on a pilot study conducted to determine the effects of cognitively stimulating activities in older patients undergoing elective hip and/or knee replacement. BACKGROUND: Cognitive decline occurs in 16-35·5% of older hospitalized patients. In-hospital interventions, such as cognitively stimulating activities, might combat cognitive decline. However, evidence supporting such interventions is limited. METHODS: For this randomized pilot trial, 50 older patients (90% women with a mean age of 72·8 years) were recruited in 2008 from a tertiary medical centre in Taiwan. While hospitalized, participants in the intervention group received a daily nurse-led, individual-based, cognitive-stimulation intervention. The comparison group received usual care. Cognitive function was assessed using Mini-Mental State Examination at admission, discharge and 1 month after discharge. RESULTS: The incidence of cognitive decline (≥2-point decline in cognitive score) by hospital discharge was significantly lower for the intervention group (12%) than the usual care group (44%). The intervention group also had better cognitive scores following hospitalization. Upon discharge, participants in the intervention group scored 1·28 points higher than at admission, whereas participants in the usual care declined by 0·76 points. Improvement in cognitive status persisted for the intervention group (+1·33 points) vs. usual care (-0·26 points) at 1 month after discharge. Group differences in changes were statistically significant both at discharge and 1 month afterwards. CONCLUSION: Our cognitive-stimulation intervention benefited global cognitive function among older patients undergoing elective hip and/or knee replacement. The benefit persisted at 1 month after discharge.

Knee-ankle joint line angle: a significant contributor to high-degree knee joint line obliquity in medial opening wedge high tibial osteotomy.

BACKGROUND: Medial opening wedge high tibial osteotomy (MOWHTO) changes the knee joint inclination in the coronal plane, which can be compensated by the ankle joint. Once there is a decompensated knee joint obliquity, it can induce excessive shear force on the articular cartilage. This study aimed to investigate the capacity of the compensation by analyzing the correlation of the knee-ankle joint line angle (KAJA) and the knee joint line obliquity (KJLO). PATIENTS AND METHODS: Ninety-six patients undergoing MOWHTO were included. We measured potential predictors including preoperative or postoperative body mass index (BMI), weight-bearing line (WBL) ratio/correction amount, knee-ankle joint line angle(KAJA), mechanical lateral distal femoral angle (mLDFA), medial proximal tibia angle (MPTA), ankle joint line obliquity (AJLO), mechanical hip-knee-ankle angle (mHKA) and joint line convergence angle (JLCA). The correlations of these predictors and postoperative KJLO were determined using Pearson correlation coefficient. The contribution of significant predictors was further analyzed using multiple linear regression. Finally, the cutoff value of the most contributing factor resulting in decompensated KJLO was derived with receiver operating characteristic (ROC) curve analysis. RESULTS: Preoperative AJLO, JLCA, MPTA, mHKA and KJLO and postoperative KAJA and MPTA correlated with postoperative KJLO. After multiple linear regression, only preoperative AJLO and JLCA and postoperative KAJA still showed significant contribution to postoperative KJLO. Postoperative KAJA made the greatest contribution. The cutoff value of postoperative KAJA was at 9.6° after ROC analysis. The incidence rate of high-grade KJLO was 69.6% when postoperative KAJA exceeded 9.6°. CONCLUSIONS: Postoperative KAJA is a significant contributor to high-grade KJLO after MOWHTO. The incidence was increased at angles greater than 9.6°. The results suggest that KAJA should be carefully assessed during preoperative planning or intraoperative evaluation. Postoperative KAJA < 9.6° can lower the rate of early high-degree KJLO.

Novel Modular Spine Blocks Affect the Lumbar Spine on Finite Element Analysis.

Introduction: There are various surgical interventions to manage osteoporotic vertebral compression fracture. Modular spine block (MSB) is a novel intravertebral fixator that can be assembled. This study aimed to quantitatively investigate the force distribution in vertebrae with the various structural designs and implantation methods by finite element analysis (FEA). Methods: A three-dimensional nonlinear FEA of the L3 implanted with MSB was constructed. Different structural designs (solid vs. hollow) and implantation methods (three-layered vs. six-layered and unilateral vs. bilateral) were studied. The model was preloaded to 150 N-m before the effects of flexion, extension, torsion, and lateral bending were analyzed at the controlled ranges of motion of 20°, 15°, 8°, and 20°, respectively. The resultant intervertebral range of motion (ROM) and disk stress as well as intravertebral force distribution were analyzed at the adjacent segments. Results: The different layers of MSB provided similar stability at the adjacent segments regarding the intervertebral ROM and disk stress. Under stress tests, the force of the solid MSB was shown to be evenly distributed within the vertebrae. The maximum stress value of the unilaterally three-layered hollow MSB was generally lower than that of the bilaterally six-layered solid MSB. Conclusions: The MSB has little stress shielding effect on the intervertebral ROM and creates no additional loading to the adjacent disks. The surgeon can choose the appropriate numbers of MSB to fix vertebrae without worrying about poly(methyl methacrylate) extravasation, implant failure, or adjacent segment disease.

Focal proximal fibular angle: A potential indicator of the tibial mechanical axis in opening-wedge high tibial osteotomy.

BACKGROUND: For opening-wedge high tibial osteotomy, correct alignment is essential for a better prognosis. It is difficult to evaluate the mechanical axis of the lower extremity or tibia using a single fluoroscopic image. This study aimed to discuss the use of focal proximal fibular angle (FPFA), which can be assessed by a single fluoroscopic image, as an intraoperative indicator. METHODS: Eligible for analyses were 111 consecutively treated patients; for the final analyses 96 patients were included. The preoperative and postoperative medial proximal tibial angle (MPTA) and FPFA were measured. The relationship between these two angles, correction amount, weight-bearing line ratio and patient characteristics were analyzed. RESULTS: The preoperative FPFA and MPTA were 96.5 ± 3.8° (mean ± standard deviation, SD) and 84.8 ± 3.0°, while the postoperative FPFA and MPTA were 87.6 ± 4.1° and 94.0 ± 3.5°, respectively. The preoperative and postoperative sums of the MPTA and FPFA were constant. The discrepancy was less than 3° in all knees, less than 2° in 92.7% knees and less than 1° in 68.8% knees. It was not correlated with age, sex, weight-bearing line ratio, or correction amount. CONCLUSION: The study findings confirmed the constancy of the sum of the MPTA and FPFA. The FPFA can be easily evaluated on a single fluoroscopic image of the knee. Use of the FPFA as guidance may simplify the procedure of opening-wedge high tibial osteotomy and approximately predict the tibial mechanical axis.

Safety and Efficacy of Kartigen® in Treating Cartilage Defects: A Randomized, Controlled, Phase I Trial.

Here, we aimed to investigate the safety and preliminary efficacy of Kartigen®, a matrix with autologous bone marrow mesenchymal stem cell-derived chondrocyte precursors embedded in atelocollagen. As a surgical graft, Kartigen® was implanted onto the cartilage defects at the weight-bearing site of the medial femoral condyle of the knee. Fifteen patients were enrolled and stratified into two groups, undergoing either Kartigen® implantation (n = 10) or microfracture (control group, n = 5). The primary endpoint was to evaluate the safety of Kartigen® by monitoring the occurrence of adverse events through physician queries, physical examinations, laboratory tests, and radiological analyses for 2 years. There were no infections, inflammations, adhesions, loose body, or tumor formations in the Kartigen®-implanted knees. The preliminary efficacy was assessed using the International Knee Documentation Committee (IKDC) score, visual analog scale, and second-look arthroscopy. The postoperative IKDC scores of the Kartigen® group significantly improved in the 16th week (IKDC = 62.1 ± 12.8, p = 0.025), kept increasing in the first year (IKDC = 78.2 ± 15.4, p < 0.005), and remained satisfactory in the second year (IKDC = 73.6 ± 13.8, p < 0.005), compared to the preoperative condition (IKDC = 47.1 ± 17.0), while the postoperative IKDC scores of the control group also achieved significant improvement in the 28th week (IKDC = 68.5 ± 6.1, p = 0.032) versus preoperative state (IKDC = 54.0 ± 9.1). However, the IKDC scores decreased in the first year (IKDC = 63.5 ± 11.6) as well as in the second year (IKDC = 52.6 ± 16.4). Thirteen patients underwent second-look arthroscopy and biopsy one year after the operation. The Kartigen® group exhibited integration between Kartigen® and host tissue with a smooth appearance at the recipient site, whereas the microfracture group showed fibrillated surfaces. The histological and immunohistochemical analyses of biopsy specimens demonstrated the columnar structure of articular cartilage and existence of collagen type II and glycosaminoglycan mimic hyaline cartilage. This study indicates that Kartigen® is safe and effective in treating cartilage defects.

Atelocollagen-Embedded Chondrocyte Precursors as a Treatment for Grade-4 Cartilage Defects of the Femoral Condyle: A Case Series with up to 9-Year Follow-Up.

We demonstrated the safety and efficacy of autologous chondrocyte precursor (CP) cell therapy in repairing Grade 4 cartilage defects of medial femoral condyles. The autologous bone marrow mesenchymal stem cells of each participant were isolated, amplified, and then differentiated into CPs in atelocollagen. Neotissues made of CPs were implanted into cartilage defects with an average cell density of 4.9 ± 2.1 × 106 cells/cm2 through arthrotomy. The knee function was evaluated with the International Knee Documentation Committee (IKDC) subjective knee form. Patients' knee functions significantly improved by the 28th week (IKDC score = 68.3 ± 12.1), relative to the initial functionality before the CP therapy (IKDC score = 46.1 ± 16.4, p-value = 0.0014). Nine of these twelve patients maintained good knee functions for 9 years post-implantation (IKDC score = 69.8 ± 12.3) at levels higher than the pre-implantation values (p-value = 0.0018). Patients were evaluated with MRI and arthroscopy, and the defective sites exhibited a smooth surface without a gap between the implant and host tissue. This study demonstrates that autologous CPs successfully engraft into the host tissue and result in the re-formation of hyaline-like cartilage, thereby improving the impaired knee functions. Most importantly, no adverse event was reported during this long-term follow-up period.

PCL-Blended Chitosan Substrates for Patterning the Heterotypic Cell Distribution in an Epithelial and Mesenchymal Coculture System.

Cell-cell and cell-substrate interactions in coculture systems are very important to the context of biomaterial scaffolds for tissue engineering applications. Understanding the cellular interactions and distribution of epithelial-mesenchymal microtissues on the controllable biomaterial surfaces is useful to study the organoid applications. The aim of the present study is to investigate the effects of chitosan/poly(ε-caprolactone) (PCL)-blended biomaterials on the distribution and spheroid formation of HaCaT and Hs68 cells in a coculture system. In this study, we demonstrated that the cocultured cells gradually changed their pattern from core/shell spheroid to monolayered morphology as the PCL content increased in the blended substrates. This indicates that the chitosan/PCL-blended substrates are able to regulate cell-substrate and cell-cell interactions to modify the distribution of HaCaT and Hs68 cells similar to various mesenchymal-epithelial organizations in biological tissues. Moreover, we also developed a two-dimension lattice model to elaborate the dependence of cell spheroid development on complex cell-cell interactions. This information may be helpful to develop appropriate biomaterials with appropriate properties to the applications of engineered epithelial-mesenchymal organoids.

Label-free platform on pH-responsive chitosan: Adhesive heterogeneity for cancer stem-like cell isolation from A549 cells via integrin ß4.

Great efforts have been paid to develop methodologies for cancer stem-like cell (CSLC) isolation in anti-cancer research. The major obstacle lies in the lack of generic biomarkers for different cancer types and the requirement of complicated immuno-labeling procedures. The purpose of this study is to establish a label-free platform for CSLC isolation using pH-responsive chitosan. Based on the adhesive heterogeneity, 15.7 ± 1.9 % of human non-small cell lung cancer (NSCLC) cell line A549 detached from the chitosan substrate following medium pH elevation from 6.99 to 7.65 within 1 h. As a result, this subpopulation of cells with low adhesiveness exhibited superior CSLC hallmarks, including self-renewal, invasive and metastatic potential, therapeutic-resistance, colony formation in vitro, as well as nude mice xenograft in vivo for tumorigenesis, in comparison with their high-adhesive counterpart. Furthermore, integrin ß4 is decisive in controlling CSLC detachment of NSCLC. Conclusively, this pH-dependent isolation provides new insights into biomaterial-based CSLC isolation.