Efficient and stable emission of warm-white light from lead-free halide double perovskites.

Lighting accounts for one-fifth of global electricity consumption1. Single materials with efficient and stable white-light emission are ideal for lighting applications, but photon emission covering the entire visible spectrum is difficult to achieve using a single material. Metal halide perovskites have outstanding emission properties2,3; however, the best-performing materials of this type contain lead and have unsatisfactory stability. Here we report a lead-free double perovskite that exhibits efficient and stable white-light emission via self-trapped excitons that originate from the Jahn-Teller distortion of the AgCl6 octahedron in the excited state. By alloying sodium cations into Cs2AgInCl6, we break the dark transition (the inversion-symmetry-induced parity-forbidden transition) by manipulating the parity of the wavefunction of the self-trapped exciton and reduce the electronic dimensionality of the semiconductor4. This leads to an increase in photoluminescence efficiency by three orders of magnitude compared to pure Cs2AgInCl6. The optimally alloyed Cs2(Ag0.60Na0.40)InCl6 with 0.04 per cent bismuth doping emits warm-white light with 86 ± 5 per cent quantum efficiency and works for over 1,000 hours. We anticipate that these results will stimulate research on single-emitter-based white-light-emitting phosphors and diodes for next-generation lighting and display technologies.

A Droplet-Reactor System Capable of Automation for the Continuous and Scalable Production of Noble-Metal Nanocrystals.

Noble-metal nanocrystals with well-controlled shapes or morphologies are of great interest for a variety of applications. To utilize these nanomaterials in consumer products, one has to produce the colloidal nanocrystals in large quantities while maintaining good control over their physical parameters and properties. Droplet reactors have shown great potential for the continuous and scalable production of colloidal nanocrystals with controlled shapes. However, the efficiencies of most previously reported systems are still limited because of the complex post-treatment procedures. For example, the mixture of silicone oil and an aqueous suspension of solid products has to be separated by leveraging their miscibility and difference in density, while the solid products often need to be purified and concentrated by centrifugation. Herein, we report the design and construction of a droplet-reactor system that include new features such as a homemade unit for the automatic separation of silicone oil from the aqueous phase as well as a cross-flow filtration unit for the effective purification and concentration of the nanocrystals. Using various types of Pd nanocrystals as examples, we have demonstrated the feasibility of using this system to automatically produce and collect samples with uniform sizes and well-controlled shapes.

Cs2PbI2Cl2, All-Inorganic Two-Dimensional Ruddlesden-Popper Mixed Halide Perovskite with Optoelectronic Response.

The two-dimensional Ruddlesden-Popper (RP) phases are an important class of halide perovskites with versatile optoelectronic properties. So far, only organic-inorganic hybrid RP phases involving long organic spacers were reported in this class. Here, we report an all-inorganic RP phase lead halide perovskite, Cs2PbI2Cl2 (1, I4/ mmm space group; a = 5.6385(8) Å, c = 18.879(4) Å), synthesized by a solid-state method. The compound exhibits a band gap of Eg ∼ 3.04 eV and photoconductivity. We find an anomalous band gap evolution in Cs2Pb1- xSn xI2Cl2 solid solutions. Our combined density functional theory and experimental study supports the thermodynamically stable nature of 1 as a unique ordered phase in the Cs2PbX4 (X = Cl, Br, I) system. The calculations suggest that 1 is a direct bandgap semiconductor with relatively small effective carrier mass along the in-plane direction, consistent with the experimentally observed in-plane UV-light photoresponse. We also demonstrate that 1 is promising for radiation detection capable of α-particle counting. Moreover, 1 shows markedly ambient and thermal stability.

Synthesis of Pt-Ni Octahedra in Continuous-Flow Droplet Reactors for the Scalable Production of Highly Active Catalysts toward Oxygen Reduction.

A number of groups have reported the syntheses of nanosized Pt-Ni octahedra with remarkable activities toward the oxygen reduction reaction (ORR), a process key to the operation of proton-exchange membrane fuel cells. However, the throughputs of those batch-based syntheses are typically limited to a scale of 5-25 mg Pt per batch, which is far below the amount needed for commercial evaluation. Here we report the use of droplet reactors for the continuous and scalable production of Pt-Ni octahedra with high activities toward ORR. In a typical synthesis, Pt(acac)2, Ni(acac)2, and W(CO)6 were dissolved in a mixture of oleylamine, oleic acid, and benzyl ether, and then pumped into a polytetrafluoroethylene tube. When the solution entered the reaction zone at a temperature held in the range of 170-230 °C, W(CO)6 quickly decomposed to generate CO gas, naturally separating the reaction solution into discrete, uniform droplets. Each droplet then served as a reactor for the nucleation and growth of Pt-Ni octahedra whose size and composition could be controlled by changing the composition of the solvent and/or adjusting the amount of Ni(acac)2 added into the reaction solution. For a catalyst based on Pt2.4Ni octahedra of 9 nm in edge length, it showed an ORR mass activity of 2.67 A mgPt(-1) at 0.9 V, representing an 11-fold improvement over a state-of-the-art commercial Pt/C catalyst (0.24 A mgPt(-1)).

Controllable Grain Morphology of Perovskite Absorber Film by Molecular Self-Assembly toward Efficient Solar Cell Exceeding 17%.

The highly developed crystallization process with respect to perovskite thin films is favorable for efficient solar cells. Here, an innovative intermolecular self-assembly approach was employed to retard the crystallization of PbI2 in dimethylformamide (DMF) by additional solvent of dimethyl sulfoxide (DMSO), which was proved to be capable of coordinating with PbI2 by coordinate covalent bond. The obtained PbI2(DMSO)x (0 ≤ x ≤ 1.86) complexes tend to be closely packed by means of intermolecular self-assembly. Afterward, an intramolecular exchange of DMSO with CH3NH3I (MAI) enabled the complexes to deform their shape and finally to reorganize to be an ultraflat and dense thin film of CH3NH3PbI3. The controllable grain morphology of perovskite thin film allows obtaining a power conversion efficiency (PCE) above 17% and a stabilized power output above 16% within 240 s by controlling DMSO species in the complex-precursor system (CPS). The present study gives a reproductive and facile strategy toward high quality of perovskite thin films and efficient solar cells.

Multifunctional MgO Layer in Perovskite Solar Cells.

A multifunctional magnesium oxide (MgO) layer was successfully introduced into perovskite solar cells (PSCs) to enhance their performance. MgO was coated onto the surface of mesoporous TiO(2) by the decomposition of magnesium acetate and, therefore, could block contact between the perovskite and TiO(2). X-ray photoelectron spectroscopy and infrared spectroscopy showed that the amount of H(2)O/hydroxyl absorbed on the TiO(2) decreased after MgO modification. The UV/Vis absorption spectra of the perovskite with MgO modification revealed an enhanced photoelectric performance compared with that of unmodified perovskite after UV illumination. In addition to the photocurrent, the photovoltage and fill factor also showed an enhancement after modification, which resulted in an increase in the overall efficiency of the cell from 9.6 to 13.9 %. Electrochemical impedance spectroscopy (EIS) confirmed that MgO acts as an insulating layer to reduce charge recombination.

Improved charge transport and injection in a meso-superstructured solar cell by a tractable pre-spin-coating process.

In meso-superstructured solar cells (MSSCs), the state-of-the-art perovskite acts as both the light harvester and electron transporter due to its ambipolar properties. The inefficient pore filling and infiltration of perovskite directly affect the continuous distribution of perovskite in mesoporous Al2O3, resulting in discontinuous carrier transport in the mesoporous structure and insufficient electron injection to the compact TiO2 layer. Herein, we introduce a simple pre-spin-coating process to improve the infiltration and pore filling of perovskite, which results in higher light absorption and enhanced electron injection, as seen in UV-vis spectra and photoluminescence (PL) spectra, respectively. We first apply time of flight (TOF) experiments to characterize charge transport in MSSCs, and the results reveal that more continuous charge transport pathways are formed with the pre-spin-coating process. This effective method, with ease of processing, demonstrates obviously improved photocurrents, reaching an efficiency as high as 14%, and promotes the application of lead halide perovskite materials in the photovoltaics field.

Continuous and scalable production of well-controlled noble-metal nanocrystals in milliliter-sized droplet reactors.

Noble-metal nanocrystals are essential to applications in a variety of areas, including catalysis, electronics, and photonics. Despite the large number of reports, there still exists a gap between academic studies and industrial applications due to the lack of ability to produce the nanocrystals in large quantities while still maintaining the good uniformity and precise controls. Because the nucleation and growth of colloidal nanocrystals are highly sensitive to experimental conditions, it is impractical to scale up their production by simply increasing the reaction volume. Here we report a new and practical approach based on milliliter-sized droplet reactors to the scalable production of nanocrystals. The droplets of 0.25 mL in volume were produced as a continuous flow in a fluidic device assembled from commercially available components. As a proof of concept, we have synthesized Pd, Au, and Pd-M (M = Au, Pt, and Ag) nanocrystals with controlled sizes, shapes, compositions, and structures on a scale of 1-10 g per hour (e.g., 3.6 g per hour for Pd cubes of 10 nm in edge length).

Volatilize-controlled oriented growth of the single-crystal layer for organic field-effect transistors.

We demonstrate a solution method of volatilize-controlled oriented growth (VOG) to fabricate aligned single crystals of 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) on a Si/SiO2 substrate. Through controlling the evaporation rate of the solvent, large-area-aligned single-crystal layers can be achieved on several substrates at the same time, covering over 90% on 2 × 1 cm substrates. The method provides a low-cost, maneuverable technology, which has potential to be used in batch production. We find that the atmosphere of the solvent with high dissolving capacity is in favor of aligned single-crystal growth. Besides, the growth mechanism of the VOG method is investigated in this paper. Top-contact organic field-effect transistors based on the single crystals of TIPS pentacene are achieved on a Si/SiO2 substrate. The optimal device exhibits a field-effect mobility of 0.42 cm(2) V(-1) s(-1) and an on/off current ratio of 10(5). Our research indicates that the VOG method is promising in single-crystal growth on a Si/SiO2 substrate for commercial production.

Synthesis, characterization, and photophysical and electroluminescent properties of blue-emitting cationic iridium(III) complexes bearing nonconjugated ligands.

The development of pure-blue-to-deep-blue-emitting ionic phosphors is an ultimate challenge for full-color displays and white-light sources. Herein we report two series of short-wavelength light-emitting cationic iridium(III) complexes with nonconjugated ancillary and cyclometalating ligands, respectively. In the first series, nonconjugated 1-[(diphenylphosphino)methyl]-3-methylimidazolin-2-ylidene-C,C2' (dppmmi) is used as the ancillary ligand and 2-phenylpyridine (ppy), 2-(2,4-difluorophenyl)pyridine (dfppy), and 1-(2,4-difluorophenyl)-1H-pyrazole (dfppz) are used as cyclometalating ligands. In the second one, nonconjugated 2,4-difluorobenzyl-N-pyrazole (dfbpz) is used as the cyclometalating ligand and 3-methyl-1-(2-pyridyl)benzimidazolin-2-ylidene-C,C(2)' (pymbi) as the ancillary ligand. The synthesis and photophysical and electrochemical properties, together with the X-ray crystal structures of these complexes, have been investigated. At room temperature, blue-emitting complexes [Ir(ppy)2(dppmmi)]PF6 (1) and [Ir(dfppy)2(dppmmi)]PF6 (2; PF6(-) is hexafluorophosphate) show much larger photoluminescence quantum yields of 24% and 46%, respectively. On the contrary, for complexes [Ir(dfppz)2(dppmmi)]PF6 (3) and [Ir(dfbpz)2(pymbi)]PF6 (4), deep-blue luminescence is only observed at low temperature (77 K). Density functional theory calculations are used to rationalize the differences in the photophysical behavior observed upon changes of the ligands. It is shown that the electronic transition dipoles of cationic iridium complexes 1 and 2 are mainly confined to cyclometalated ligands ((3)MLCT and LC (3)π-π*) and those of complex 3 are confined to all of the ligands ((3)MLCT, LC (3)π-π*, and (3)LLCT) because of the high LUMO energy level of dfppz. The emission of 4 mainly originates from the central iridium(III) ion and cyclometalated ligand to ancillary ligand charge transfer ((3)MLCT and (3)LLCT), in contrast to commonly designed cationic complexes using carbene-type ancillary ligands, where emission originates from the cyclometalated main ligands. Solution-processed organic light-emitting diodes based on complexes 1 and 2 gave blue-green (498 nm) and blue (478 nm) electroluminescence with maximum current efficiencies of 3.8 and 3.4 cd A(-1), respectively. The results indicate that introducing nonconjugated ligands into cationic iridium complexes is an effective means of achieving short-wavelength light-emitting phosphors.

Combined post-modification of iodide ligands and wide band gap ZnS in quantum dot sensitized solar cells.

Combined post-modification strategy of iodide ligands and wide band gap ZnS layer were employed in quantum dot sensitized solar cells. J-V curves show that the combined post-modification could improve the photoconversion efficiency compared to the single post-modification of ZnS because of the more effective passivation. CdS-sensitized and CdS/CdSe-co-sensitized solar cells both reveal that the assembly structure of QDs/I(-)/ZnS is more beneficial for the efficiency of solar cells than that of QDs/ZnS/I(-). EIS results show that the former structure exhibit higher interface resistance and could suppress electron recombination more powerfully. XPS results reveal that the iodide ligands have different binding energy, which indicates a different coordination state of the iodide atom in these two structures. Finally, 3.28% efficiency and 18.16 mA cm(-2) were achieved for CdS/CdSe QDSCs by applying this combined post-modification.

Effect of blood flow-restrictive resistance training on metabolic disorder and body composition in older adults with type 2 diabetes: a randomized controlled study.

Introduction: To explore whether blood flow-restrictive resistance exercise (BFRE) can be used as an alternative strategy to moderate-intensity resistance training (RT) to improve metabolic disorder and body composition in older adults with type 2 diabetes (T2DM). Methods: This is a single-blind, randomized, controlled trial. Ninety-eight older adults with T2DM were randomly divided into three groups: BFRE group (n = 34), RT group (n = 31) and control group (n = 33). Two exercise groups received supervised collective training for a period of six months, each lasting 50 min, three times a week. The primary outcomes included fasting plasma glucose (FPG), Glycosylated hemoglobin (HbA1c), blood lipids, blood pressure, and body composition. The secondary outcome was muscle performance. Results: After six months of intervention, the FPG, HbA1c, blood lipids, diastolic blood pressure, body composition, and muscle performance of the two exercise groups were significantly improved relative to the control group and baseline measurements (P < 0.05). There was no significant increase in lean mass between the two exercise groups compared to the control group and baseline (p > 0.05). There was no significant decrease in systolic blood pressure between the two exercise groups compared to the control group (p > 0.05), but it was significantly lower than their baseline (P < 0.05). There was no significant difference in all indicators between the two exercise groups at the baseline, third and sixth months of intervention (p > 0.05). Discussion: BFRE can safely and effectively improve the metabolic disorder and body composition of older adults with T2DM. For elderly exercise beginners, BFRE can be used as an alternative strategy to moderate-intensity resistance training. Clinical trial registration: https://www.chictr.org.cn/showproj.html?proj=178886, identifier ChiCTR2300074357.

High-performance transistors based on zinc tin oxides by single spin-coating process.

Films of zinc tin oxide (ZTO), grown from solutions with zinc acetate dehydrate and tin(II) 2-ethylhexanoate dissolved in 2-methoxyethanol, have been used to fabricate thin-film transistors in combination with solution-processed aluminum oxide as the gate insulator. And the nonhomogeneity of the single-layer ZTO films, caused by both ZTO film-substrate interaction and surface crystallization, has been studied, which is essential to achieve high performance transistors. In the bottom-contact thin-film transistor based on a Sn-rich layer of ZTO, a high mobility of 78.9 cm(2) V(-1) s(-1) in the saturation region has been obtained, with an on-to-off current ratio of 10(5) and a threshold gate voltage of 1.6 V.

Inorganic halogen ligands in quantum dots: I-, Br-, Cl- and film fabrication through electrophoretic deposition.

Halogen ions (I(-), Br(-), Cl(-)) were added into a colloidal solution of CdSe and PbS quantum dots (QDs) to form QDs capped with these inorganic ligands. Halogen ions attached to QDs through electrostatic interactions and the varying coordination strength between the inorganic ligands and QDs led to different degrees of redispersion and stabilization in polar solvents. Moreover, we successfully conducted electrophoretic deposition (EPD) of QDs capped with inorganic ligands. Negatively charged QDs were adsorbed onto a positively charged TiO2 anode. The assembled QDs films were used in photovoltaic devices and offered better efficiency than QDs capped with organic ligands. This work demonstrates that halogen ions are indeed promising ligands to improve the stability of QDs with inorganic ligands and the EPD method shows prospects in assembling QDs films for practical applications.

Control of intramolecular π-π stacking interaction in cationic iridium complexes via fluorination of pendant phenyl rings.

Intramolecular π-π stacking interaction in one kind of phosphorescent cationic iridium complexes has been controlled through fluorination of the pendant phenyl rings on the ancillary ligands. Two blue-green-emitting cationic iridium complexes, [Ir(ppy)(2)(F2phpzpy)]PF(6) (2) and [Ir(ppy)(2)(F5phpzpy)]PF(6) (3), with the pendant phenyl rings on the ancillary ligands substituted with two and five fluorine atoms, respectively, have been synthesized and compared to the parent complex, [Ir(ppy)(2)(phpzpy)]PF(6) (1). Here Hppy is 2-phenylpyridine, F2phpzpy is 2-(1-(3,5-difluorophenyl)-1H-pyrazol-3-yl)pyridine, F5phpzpy is 2-(1-pentafluorophenyl-1H-pyrazol-3-yl)-pyridine, and phpzpy is 2-(1-phenyl-1H-pyrazol-3-yl)pyridine. Single crystal structures reveal that the pendant phenyl rings on the ancillary ligands stack to the phenyl rings of the ppy ligands, with dihedral angles of 21°, 18°, and 5.0° between least-squares planes for complexes 1, 2, and 3, respectively, and centroid-centroid distances of 3.75, 3.65, and 3.52 Å for complexes 1, 2, and 3, respectively, indicating progressively reinforced intramolecular π-π stacking interactions from complexes 1 to 2 and 3. Compared to complex 1, complex 3 with a significantly reinforced intramolecular face-to-face π-π stacking interaction exhibits a significantly enhanced (by 1 order of magnitude) photoluminescent efficiency in solution. Theoretical calculations reveal that in complex 3 it is unfavorable in energy for the pentafluorophenyl ring to swing by a large degree and the intramolecular π-π stacking interaction remains on the lowest triplet state.

Interface modification of 8-hydroxyquinoline aluminium with combined effects in quasi-solid dye-sensitized solar cells.

In this paper, 8-hydroxyquinoline aluminium (Alq(3)) was used in interface modification of dye-sensitized solar cells (DSCs). Alq(3) was the first discovered interface modification material with combined effects of retarding charge recombination and Förster resonant energy transfer (FRET). Results of dark current curve and AC impedance showed that Alq(3) could retard charge recombination in DSCs. I-V curves showed that conversion efficiency increased with Alq(3) modification. Besides the interface modification effect, it was discovered that Alq(3) also acted as energy relay dye with the FRET effect between itself and N3, which increased photoresponse and electron injection. The application of Alq(3) with combined effects opened a new door to explore more novel multi-functional interface modification materials to improve the performance of DSCs.

MAPbI3 Photodetectors with 4.7 MHz Bandwidth and Their Application in Organic Optocouplers.

The photodetector based on methylammonium lead iodide (MAPbI3) is a promising device for wide wavelength range (380-780 nm) sensitivity. However, its industrial application is limited by the relatively low response speed to the light signal, which has received little attention. Only a few reports show low-bandwidth characteristics (less than 1 MHz at 0.1 cm2). Here, when a cosolvent strategy to manipulate the thickness and the crystallinity of the MAPbI3 film is adopted, photodetectors with a -3 dB bandwidth of 4.7 MHz are achieved (at 0.16 cm2 photo detecting area). The performance is significantly better than most of the organic and hybrid photodetectors reported so far. Based on this photodetector and an organic light-emitting diode (OLED), an organic optocoupler system with 1 MHz response frequency is successfully set up. Our results suggest that thickness-manipulated cosolvent strategy is a promising method in high-speed MAPbI3-based photodetectors.

A randomized controlled trial of Baduanjin exercise to reduce the risk of atherosclerotic cardiovascular disease in patients with prediabetes.

To investigate the effectiveness of long-term Baduanjin and aerobic training on the 10-year risk of atherosclerotic cardiovascular disease in prediabetic patients. This study was single-blind randomized controlled trial. A total of 98 participants with prediabetes were randomly divided into three groups: the BDJ (n = 34), AT (n = 32), and control (n = 32) groups. Participants in the BDJ and AT groups underwent one year of supervised group exercise, consisting of 60 min/session every other day. The primary outcomes were metabolic control and the 10-year risk of ASCVD. The secondary outcome was a change in blood glucose status. After the intervention, various metabolic indexes were significantly improved in the two exercise groups relative to the control group and baseline measurements (p < 0.05). Compared with no exercise, BDJ and AT had significant preventive and protective effects against the risk of ASCVD in patients with prediabetes (p < 0.001). The overall effects of the two exercise groups were similar (p > 0.05). Long-term BDJ training can effectively reduce the risk of type 2 diabetes mellitus (T2DM) and its cardiovascular complications in prediabetic patients. The effect of BDJ is similar to that of moderate-intensity aerobic exercise.

Photocatalysis of PbS quantum dots in a quantum dot-sensitized solar cell: photovoltaic performance and characteristics.

PbS QDs have been synthesized by an in situ photocatalysis method using the photocatalytic activity of nanocrystalline TiO(2) films. Both the photovoltaic response and size of the synthesized PbS QDs were analyzed. Compared with the conventional synthesis route, this method is simpler and produces less waste.

Interface modification effects of 4-tertbutylpyridine interacting with N3 molecules in quasi-solid dye-sensitized solar cells.

In this paper, the interface modification effects of 4-tertbutylpyridine (TBP), especially the interaction with dye molecules, were discussed. The results of FTIR showed that TBP interacted with dye molecules, in addition to its interaction with the TiO(2) film. Reaction between N3 and TBP by the interaction force of the H atom in the -COOH group of N3 and the N atom of TBP could retard the aggregation of dye molecules, decreasing the electron quenching and charge recombination. Furthermore, the results of cyclic voltammograms and UV-vis absorption edge revealed the interaction between TBP and dye molecules could cause the energy level of the dye molecules to change, influencing the electron injection efficiency in DSCs. The IPCE results indicated that with TBP modification, the injection efficiency decreased, but the electron collection efficiency was enhanced.