RESUMO
Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS2@CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm-2, an open-circuit voltage (Voc) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm-2. This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics.
RESUMO
Optical interconnects exhibit superior potential in the precise regulation of photon transmission for organic photonic circuits. However, the rational design of well-defined organic heterostructures toward active optoelectronics remains challenging. Herein, we designed organic branched heterostructures (OBHs) with accurate spatial organization for optical interconnection. Notably, the precise regulation of OBHs has been controllably achieved including the trunk morphologies and the branched microwire number. Significantly, these as-prepared OBHs inherently exhibit the multichannel coupling outputs and the excitation position-dependent waveguide characteristics, leading to various outcoupling signals with tunable intensity and emission colors. The optical interconnects are realized due to the occurrence of exciton conversion and photon propagation between branch and trunk at the heterojunction, benefiting the application possibilities of two-dimensional (2D) optical barcodes.
RESUMO
Organic multilayer heterostructures with accurate spatial organization demonstrate strong light-matter interaction from excitonic responses and efficient carrier transfer across heterojunction interfaces, which are considered as promising candidates toward advanced optoelectronics. However, the precise regulation of the heterojunction surface area for finely adjusting exciton conversion and energy transfer is still formidable. Herein, organic bilayer heterostructures (OBHs) with controlled face-to-face heterojunction via a stepwise seeded growth strategy, which is favorable for efficient exciton propagation and conversion of optical interconnects are designed and synthesized. Notably, the relative position and overlap length ratio of component microwires (LDSA /LBPEA = 0.39-1.15) in OBHs are accurately regulated by modulating the crystallization time of seeded crystals, resulting into a tailored heterojunction surface area (R = Loverlap /LBPEA = 37.6%-65.3%). These as-prepared OBHs present the excitation position-dependent waveguide behaviors for optical outcoupling characteristics with tunable emission colors and intensities, which are applied into two-dimensional (2D) photonic barcodes. This strategy opens a versatile avenue to purposely design OBHs with tailored heterojunctions for efficient energy transfer and exciton conversion, facilitating the application possibilities of advanced integrated optoelectronics.
RESUMO
Multifunctional and long-term stable wearable heating systems have attracted extensive attention from experts, yet smart textiles that only rely on harvesting the body's heat without additional energy still face huge challenges in practical applications. Herein, we rationally prepared the monolayer MXene Ti3C2Tx nanosheets via an in situ hydrofluoric acid generation method, which was further employed to construct a wearable heating system of MXene @ polyester polyurethane blend fabrics (MP textile) for the passive personal thermal management through a simple spraying process. Owing to the unique two-dimensional (2D) structure, the MP textile presents the desired mid-infrared emissivity, which could efficiently suppress the thermal radiation loss from the human body. Notably, the MP textile with an MXene concentration of 28 mg/mL exhibits a low mid-infrared emissivity of 19.53% at 7-14 µm. Significantly, these prepared MP textiles demonstrate an enhanced temperature of more than 6.83 °C compared with those of favorably traditional fabrics, involving the black polyester fabric, pristine polyester polyurethane blend fabric (PU/PET), and cotton, suggesting a charming indoor passive radiative heating performance. The temperature of real human skin covered by MP textile is 2.68 °C higher than that covered by cotton fabric. Impressively, these prepared MP textiles simultaneously possess attractive breathability, moisture permeability, mechanical strength, and washability, which provide new insight into human body temperature regulation and physical health.
RESUMO
Harvesting sunlight into cost-effective electricity presents an enticing prospect for self-powered wearable applications. The photothermal materials with an extensive absorption are fundamental to achieve optical and thermal concentration of the sunlight for efficiency output electricity of wearable solar thermoelectric generators (STEGs). Here, we synthesize an organic charge-transfer (CT) cocrystal with a flat absorption from ultraviolet to second near-infrared region (200 to 1950 nanometers) and a high photothermal conversion efficiency (PCE) of 80.5%, which is introduced into polyurethane toward large-area nanofiber membrane by electrospinning technology. These corresponding membranes demonstrate a high PCE of 73.7% under the strain more than 80%. Sandwiched with carbon nanotube-based thermoelectric fibers, the membranes as stretchable solar absorbers of STEGs could supply a notably increase temperature gradient, processing a maximum output voltage density of 23.4 volts per square meter at 1:00 p.m. under sunlight. This strategy presents an important insight in heat management for wearable STEGs with a desired electricity output.
RESUMO
Highly spatial and angular precision in epitaxial-growth process is crucial for constructing organic low-dimensional heterostructures (OLDHs) with the desired substructures, which remains significant challenge owing to the unpredicted location of complex heterogeneous nucleation. Herein, a dynamic epitaxial-growth approach is developed along the tailored longitudinal/horizontal directions to create diverse OLDHs with hierarchical architectures. The controlled morphology evolution of seed crystals from kinetic to thermodynamic species is achieved via incrementally increasing the crystallization time from 0 to 600 s. Accordingly, the kinetic and thermodynamic seed crystals respectively present the specific lattice-matching crystal-planes of (100) and (011), which facilitates the longitudinal epitaxial-growth (LG) process for triblock heterostructures, and the horizontal epitaxial-growth (HG) process for axial-branch heterostructures. The dominant core/shell heterostructures are prepared via both LG and HG processes with a crystallization time of ≈30 s. Significantly, these prepared OLDHs realize the rationally polarized exciton conversion for optical logic gate application through the exciton conversion and photon propagation at the heterojunction. This strategy provides an avenue for the precise synthesis of OLDHs with anisotropy optical characters for integrated optoelectronics.
RESUMO
Two-dimensional transition metal dichalcogenides are of particular interest in high-performance photothermal conversion, yet there remains a huge challenge in their practical application in smart textiles for healthcare, energy, and personal protection. Herein, we controllably prepared MoS2 hollow nanospheres with a high photothermal conversion efficiency of 36% via a microemulsion-hydrothermal method, which was further applied to construct photothermal fibers for personal thermal management after a hot-blast dip-drying process. Because of the prominent photothermal effect, the temperature of the photothermal fibers sharply increases from the room temperature value of 25.0 to 55.5 °C in 60 s under near-infrared illumination with a power density of 500 W/cm2. Furthermore, the photothermal fiber pad demonstrated an obvious temperature enhancement of 38.0 °C from a skin temperature of 22.0 °C after it was irradiated by natural sunlight for 60 s. Significantly, the antibacterial elimination rates of the photothermal fibers for Escherichia coli and Staphylococcus aureus are â¼99.9 and â¼99.8%, respectively. This strategy affords an avenue toward the practical application of photothermal materials in smart fibers for personal thermoregulation.