How ionic species structure influences phase structure and transitions from protic ionic liquids to liquid crystals to crystals.

The phase behaviour of n-alkylammonium (C6 to C16) nitrates and formates has been characterised using synchrotron small angle and wide angle X-ray scattering (SAXS/WAXS), differential scanning calorimetry (DSC), cross polarised optical microscopy (CPOM) and Fourier transform infrared spectroscopy (FTIR). The protic salts may exist as crystalline, liquid crystalline or ionic liquid materials depending on the alkyl chain length and temperature. n-Alkylammonium nitrates with n ≥ 6 form thermotropic liquid crystalline (LC) lamellar phases, whereas n ≥ 8 was required for the formate series to form this LC phase. The protic ionic liquid phase showed an intermediate length scale nanostructure resulting from the segregation of the polar and nonpolar components of the ionic liquid. This segregation was enhanced for longer n-alkyl chains, with a corresponding increase in the correlation length scale. The crystalline and liquid crystalline phases were both lamellar. Phase transition temperatures, lamellar d-spacings, and liquid correlation lengths for the n-alkylammonium nitrates and formates were compared with those for n-alkylammonium chlorides and n-alkylamines. Plateau regions in the liquid crystalline to liquid phase transition temperatures as a function of n for the n-alkylammonium nitrates and formates are consistent with hydrogen-bonding and cation-anion interactions between the ionic species dominating alkyl chain-chain van der Waals interactions, with the exception of the mid chained hexyl- and heptylammonium formates. The d-spacings of the lamellar phases for both the n-alkylammonium nitrates and formates were consistent with an increase in chain-chain layer interdigitation within the bilayer-based lamellae with increasing alkyl chain length, and they were comparable to the n-alkylammonium chlorides.

Protic ionic liquids (PILs) nanostructure and physicochemical properties: development of high-throughput methodology for PIL creation and property screens.

A high-throughput approach was developed in order to prepare and dry a series of protic ionic liquids (PILs) from 48 Brønsted acid-base combinations. Many combinations comprised an alkyl carboxylic acid paired with an alkyl amine. Visual screens were developed to identify which acid-base combinations formed PILs, and of those, which PILs were likely to have high surface tensions, low viscosities, and low melting points. The surface tension screen was validated through pendant drop surface tension measurements. Karl Fischer coulometric titration was used to obtain the water contents, and it was noted that there is a considerable difference in the drying rate throughout this series of PILs. It was observed that an octyl chain present on either the cation or anion was detrimental to the formation of a PIL with a low melting point, and instead increased the likelihood of a gel or solid forming. The nanostructure of the PILs was determined, using synchrotron small and wide angle X-ray scattering (SAXS/WAXS), to consist of polar and non-polar domains, with the alkyl chains on the cation and anion intercalating. The results indicate that both the alkyl chain on the cation and/or anion contribute to the correlation distance, for the intermediate range order, with the expectation that there is charge alternation of the ions in the polar region. The maximum correlation distance was observed when there was an alkyl chain present on only one ion. This correlation distance could be significantly reduced by varying the alkyl chain length present on the other ion, which was attributed to increased disorder and interdigitation of chains, and to toe-to-toe alignment of the chains. To the best of our knowledge this is the first PIL report into the effect of having an alkyl chain present on both the cation and the anion.

Lyotropic liquid crystal phases of phytantriol in a protic ionic liquid with fluorous anion.

The phase behaviour of phytantriol in the protic ionic liquid (PIL) 1-methylimidazolium pentadecafluorooctanoate (MImOF) and four different MImOF-water compositions was investigated by small- and wide-angle X-ray scattering (SAXS/WAXS), cross polarised optical microscopy (CPOM) and infrared spectroscopy (IR). MImOF is a distinct protic ionic liquid in that it contains a fluorocarbon anion and a hydrocarbon cation. This leads to MImOF having an unusual liquid nanostructure, such that it contains fluorocarbon, hydrocarbon and polar domains. No lyotropic liquid crystal phases were observed for phytantriol in neat MImOF. However, on addition of water, lamellar, cubic Ia3¯d and micellar phases were observed for specific MImOF-phytantriol-water compositions at room temperature, and up to 60 °C. The phase behaviour for phytantriol in the solvent mixture of 25 wt%-MImOF-75 wt%-water was the most similar to the phytantriol-water phase diagram. Only this MImOF-water composition supported the Ia3¯d cubic phase, which had a lattice parameter between 100-140 Å compared to 86-100 Å in deionised water, indicating significant swelling due to the MImOF. IR spectroscopy showed that a percentage of the water molecules were hydrogen bonded to the N-H of the MIm cation, and this water decreased the hydrogen bonding present between the cation and anion of the ionic liquid. This investigation furthers our understanding of the interaction of ionic liquids with solutes, and the important role that the different IL nanostructures can have on influencing these interactions.

Protic ionic liquids with fluorous anions: physicochemical properties and self-assembly nanostructure.

A series of 11 new protic ionic liquids with fluorous anions (FPILs) have been identified and their self-assembled nanostructure, thermal phase transitions and physicochemical properties were investigated. To the best of our knowledge this is the first time that fluorocarbon domains have been reported in PILs. The FPILs were prepared from a range of hydrocarbon alkyl and heterocyclic amine cations in combination with the perfluorinated anions heptafluorobutyrate and pentadecafluorooctanoate. The nanostructure of the FPILs was established by using small- and wide-angle X-ray scattering (SAXS and WAXS). In the liquid state many of the FPILs showed an intermediate range order, or self-assembled nanostructure, resulting from segregation of the polar and nonpolar hydrocarbon and fluorocarbon domains of the ionic liquid. In addition, the physicochemical properties of the FPILs were determined including the melting point (T(m)), glass transition (T(g)), devitrification temperature (T(c)), thermal stability and the density ρ, viscosity η, air/liquid surface tension γ(LV), refractive index n(D), and ionic conductivity κ. The FPILs were mostly solids at room temperature, however two examples 2-pyrrolidinonium heptafluorobutyrate (PyrroBF) and pyrrolidinium heptafluorobutyrate (PyrrBF) were liquids at room temperature and all of the FPILs melted below 80 °C. Four of the FPILs exhibited a glass transition. The two liquids at room temperature, PyrroBF and PyrrBF, had a similar density, surface tension and refractive index but their viscosity and ionic conductivity were very different due to dissimilar self-assembled nanostructure.

Monodisperse nonionic isoprenoid-type hexahydrofarnesyl ethylene oxide surfactants: high throughput lyotropic liquid crystalline phase determination.

The neat and lyotropic phase behavior of eight new ethylene oxide amphiphiles (EO = 1-8) with a hexahydrofarnesyl chain (3,7,11-trimethyldodecyl) and narrow polydispersity (>98.5% purity) is reported. Below five EO units the behavior of the neat surfactants show only a glass transition, Tg ∼ -90 °C. Above four EO units, crystallization (Tcrys) and crystal-isotropic liquid (Tm) transitions are also observed that increase with degree of ethoxylation of the surfactant headgroup. The lyotropic liquid crystalline phase behavior spans a complex spectrum of surfactant-water interfacial curvatures. Specifically, inverse phases are present below ambient temperatures for EO < 4, with HFarn(EO)2 exhibiting an inverse hexagonal (H(II)) phase stable to dilution. The phase diagram of HFarn(EO)3 displays both the gyroid (Ia3d) and double diamond (Pn3m) inverse bicontinuous cubic phases, with the latter being thermodynamically stable in excess water within the physiological regime. There is a strong preference for planar bilayer structures at intermediate headgroup ethoxylation, with the crossover to normal phases occurring at HFarn(EO)(7-8) which exhibits normal hexagonal (H(I)) and cubic (Q(I)) phases at ambient temperatures. The toxicity of colloidal dispersions of these EO amphiphiles was assayed against normal breast epithelial (HMEpiC) and breast cancer (MCF7) cell lines. The IC50 of the EO amphiphiles was similar in both cell lines with moderate toxicity ranging from ca. <5 to 140 µM in an in vitro cell viability assay. Observations are qualitatively rationalized in terms of the molecular geometry of the surfactant. The physicochemical behavior of the HFarnesyl ethylene oxide amphiphiles is compared to other ethylene oxide surfactants.

Nanostructure and amphiphile self-assembly in polar molecular solvents: amides and the "solvophobic effect".

The ability of low molecular weight amides to support amphiphile self-assembly is shown to be a general feature for this class of solvents. This report extends the number of known polar solvents which can support amphiphile self-assembly by five new amides; more than doubling the number of known amides able to serve as amphiphile self-assembly media. The formation of lyotropic liquid crystalline phases by cationic and non-ionic surfactants in these liquid amides is reported. The ability of a solvent to promote amphiphile self-assembly is governed by the "solvophobic effect" and is linked to the solvent cohesiveness. The Gordon parameter which is a measure of the solvent cohesiveness was found to provide a guide to an amides capacity to support lyotropic liquid crystalline phase diversity and thermal stability ranges of those phases. The "solvophobic effect" and steric hindrance factors were compared between amide's and protic ionic liquids possessing analogous chemical structures and also being able to promote amphiphile self-assembly.

Nanostructured nonionic thymidine nucleolipid self-assembly materials.

Three nucleoside lipids have been synthesized: 3'-oleoylthymidine, 3',5'-dioleoylthymidine, and 3'-phytanoylthymidine. Differential scanning calorimetry and X-ray diffraction have been employed to characterize the physical properties of these neat lipids. Polarizing optical microscopy, small-angle X-ray scattering, and cryo-transmission electron microscopy techniques have been used to investigate the phase behavior in aqueous systems. Both oleoyl-based nucleoside lipids adopted a lamellar crystalline phase in the neat form at room temperature, and the phytanoyl derivative exhibited a fluid isotropic phase. Under excess water conditions, the presence of one branched (phytanoyl) or one unsaturated (oleoyl) chain promoted the formation of a liquid-crystalline lamellar phase at physiological temperatures. In contrast, the 3',5'-dioleoylthymidine derivative is nonswelling and does not exhibit lyotropic liquid-crystalline phase behavior. The nucleolipids' propensity for DNA-type binding and recognition has been evaluated by using a monolayer system to measure surface pressure-area isotherms in a Langmuir trough and indicates that the nucleoside base is available for nonspecific hydrogen bonding in the monolayer liquid expanded state for the single-chain nucleolipids but not for the dual-chain amphiphile.

Lanthanide phytanates: liquid-crystalline phase behavior, colloidal particle dispersions, and potential as medical imaging agents.

Lanthanide salts of phytanic acid, an isoprenoid-type amphiphile, have been synthesized and characterized. Elemental analysis and FTIR spectroscopy were used to confirm the formed product and showed that three phytanate anions are complexed with one lanthanide cation. The physicochemical properties of the lanthanide phytanates were investigated using DSC, XRD, SAXS, and cross-polarized optical microscopy. Several of the hydrated salts form a liquid-crystalline hexagonal columnar mesophase at room temperature, and samarium(III) phytanate forms this phase even in the absence of water. Select lanthanide phytanates were dispersed in water, and cryo-TEM images indicate that some structure has been retained in the dispersed phase. NMR relaxivity measurements were conducted on these systems. It has been shown that a particulate dispersion of gadolinium(III) phytanate displays proton relaxivity values comparable to those of a commercial contrast agent for magnetic resonance imaging and a colloidal dispersion of europium(III) phytanate exhibits the characteristics of a fluorescence imaging agent.

Protic ionic liquids: physicochemical properties and behavior as amphiphile self-assembly solvents.

The physicochemical properties of 22 protic ionic liquids (PILs) and 6 protic molten salts, and the self-assembly behavior of 3 amphiphiles in the PILs, are reported. Structure-property relationships have been explored for the PILs, including the effect of increasing the substitution of ammonium cations and the presence of methoxy and hydroxyl moieties in the cation. Anion choices included the formate, pivalate, trifluoroacetate, nitrate, and hydrogen sulfate anions. This series of PILs had a diverse range of physicochemical properties, with ionic conductivities up to 51.10 mS/cm, viscosities down to 5.4 mPa.s, surface tensions between 38.3 and 82.1 mN/m, and densities between 0.990 and 1.558 g/cm3. PILs were designed with various levels of solvent cohesiveness, as quantified by the Gordon parameter. Fourteen PILs were found to promote the self-assembly of amphiphiles. High-throughput polarized optical microscopy was used to identify lamellar, hexagonal, and bicontinuous cubic amphiphile self-assembly phases. The presence and extent of amphiphile self-assembly have been discussed in terms of the Gordon parameter.

Formation of amphiphile self-assembly phases in protic ionic liquids.

A range of protic ionic liquids (PILs) have been identified as being capable of supporting the self-assembly of the nonionic surfactants myverol 18-99 K (predominantly monoolein) and phytantriol. PIL-surfactant penetration scans have provided a high throughput technique to determine which lyotropic liquid crystalline phases were formed in the 40 PIL-surfactant systems investigated. Lamellar, inverse hexagonal, and bicontinuous cubic phases that are stable in excess PIL have been observed in surfactant-PIL systems. The studied PILs possess a wide range of solvent properties, including surface tension and viscosity. The nature of the formed amphiphile self-assembly phases is discussed in terms of the PIL structure and solvent properties.

Protic ionic liquids: solvents with tunable phase behavior and physicochemical properties.

The phase behavior, including glass, devitrification, solid crystal melting, and liquid boiling transitions, and physicochemical properties, including density, refractive index, viscosity, conductivity, and air-liquid surface tension, of a series of 25 protic ionic liquids and protic fused salts are presented along with structure-property comparisons. The protic fused salts were mostly liquid at room temperature, and many exhibited a glass transition occurring at low temperatures between -114 and -44 degrees C, and high fragility, with many having low viscosities, down to as low as 17 mPa.s at 25 degrees C, and ionic conductivities up to 43.8 S/cm at 25 degrees C. These protic solvents are easily prepared through the stoichiometric combination of a primary amine and Brønsted acid. They have poor ionic behavior when compared to the far more studied aprotic ionic liquids. However, some of the other physicochemical properties possessed by these solvents are highly promising and it is anticipated that these, or analogous protic solvents, will find applications beyond those already identified for aprotic ionic liquids. This series of protic fused salts was employed to determine the effect of structural changes on the physicochemical properties, including the effect of hydroxyl groups, increasing alkyl chain lengths, branching, and the differences between inorganic and organic anions. It was found that simple structural modifications provide a mechanism to manipulate, over a wide range, the temperature at which phase transitions occur and to specifically tailor physicochemical properties for potential end-use applications.

Nanostructured protic ionic liquids retain nanoscale features in aqueous solution while precursor Brønsted acids and bases exhibit different behavior.

Small- and wide-angle X-ray scattering (SWAXS) has been used to investigate the effect that water has on the nanoscale structure of protic ionic liquids (PILs) along with their precursor Brønsted acids and bases. The series of PILs consisted of primary, secondary, and tertiary alkylammonium cations in conjunction with formate, nitrate, or glycolate anions. Significant differences were observed for these systems. The nanoscale aggregates present in neat protic ionic liquids were shown to be stable in size on dilution to high concentrations of water, indicating that the water is localized in the ionic region and has little effect on the nonpolar domains. The Brønsted acid-water solutions did not display nanostructure at any water concentration. Primary amine Brønsted bases formed aggregates in water, which generally displayed characteristics of poorly structured microemulsions or a form of bicontinuous phase. Exceptions were butyl- and pentylamine with high water concentrations, for which the SWAXS patterns fitted well to the Teubner-Strey model for microemulsions. Brønsted base amines containing multiple alkyl chains or hydroxyl groups did not display nanostructure at any water concentration. IR spectroscopy was used to investigate the nature of water in the various solutions. For low PIL concentrations, the water was predominately present as bulk water for PIL molar fractions less than 0.4-0.5. At high PIL concentrations, in addition to the bulk water, there was a significant proportion of perturbed water, which is water influenced in some way by the cations and anions. The molecular state of the water in the studied amines was predominately present as bulk water, with smaller contributions from perturbed water than was seen in the PILs.

Many protic ionic liquids mediate hydrocarbon-solvent interactions and promote amphiphile self-assembly.

A large number of protic ionic liquids (PILs) have been found to mediate solvent-hydrocarbon interactions and promote amphiphile self-assembly. Hexagonal, cubic, and lamellar lyotropic liquid crystalline phases were observed in PIL-hexadecyltrimethylammonium bromide systems. The driving force for the formation of the self-assembled aggregate structures has been attributed to an entropic contribution to the free energy of association, analogous to the hydrophobic effect in water. The specific aggregate structures formed depend upon the cationic and anionic components of the PIL and their interactions with the amphiphiles.