Orientation-Locked DNA Origami for Stable Trapping of Small Proteins in the Nanopore Electro-Osmotic Trap.

Nanopores are versatile single-molecule sensors offering a simple label-free readout with great sensitivity. We recently introduced the nanopore electro-osmotic trap (NEOtrap) which can trap and sense single unmodified proteins for long times. The trapping is achieved by the electro-osmotic flow (EOF) generated from a DNA-origami sphere docked onto the pore, but thermal fluctuations of the origami limited the trapping of small proteins. Here, we use site-specific cholesterol functionalization of the origami sphere to firmly link it to the lipid-coated nanopore. We can lock the origami in either a vertical or horizontal orientation which strongly modulates the EOF. The optimized EOF greatly enhances the trapping capacity, yielding reduced noise, reduced measurement heterogeneity, an increased capture rate, and 100-fold extended observation times. We demonstrate the trapping of a variety of single proteins, including small ones down to 14 kDa. The cholesterol functionalization significantly expands the application range of the NEOtrap technology.

Understanding the Role of Surface States on Mesoporous NiO Films.

Surface states of mesoporous NiO semiconductor films have particular properties differing from the bulk and are able to dramatically influence the interfacial electron transfer and adsorption of chemical species. To achieve a better performance of NiO-based p-type dye-sensitized solar cells (p-DSCs), the function of the surface states has to be understood. In this paper, we applied a modified atomic layer deposition procedure that is able to passivate 72% of the surface states on NiO by depositing a monolayer of Al2O3. This provides us with representative control samples to study the functions of the surface states on NiO films. A main conclusion is that surface states, rather than the bulk, are mainly responsible for the conductivity in mesoporous NiO films. Furthermore, surface states significantly affect dye regeneration (with I-/I3- as redox couple) and hole transport in NiO-based p-DSCs. A new dye regeneration mechanism is proposed in which electrons are transferred from reduced dye molecules to intra-bandgap states, and then to I3- species. The intra-bandgap states here act as catalysts to assist I3- reduction. A more complete mechanism is suggested to understand the particular hole transport behavior in p-DSCs, in which the hole transport time is independent of light intensity. This is ascribed to the percolation hole hopping on the surface states. When the concentration of surface states was significantly reduced, the light-independent charge transport behavior in pristine NiO-based p-DSCs transformed into having an exponential dependence on light intensity, similar to that observed in TiO2-based n-type DSCs. These conclusions on the function of surface states provide new insight into the electronic properties of mesoporous NiO films.

On Induced Surface Charge in Solid-State Nanopores.

Solid-state nanopores constitute a versatile platform for study of ion transport in nanoconfinement. The electrical double layer (EDL) plays a vital role in such nanoconfinements, but effects of induced surface charge on the EDL in the presence of an external transmembrane electric field are yet to be characterized. Here, the formation of induced charge on the nanopore sidewall surface and its effects, via modulation of the EDL and electroosmotic flow, on the ionic current are elucidated using a novel experimental setup with solid-state truncated-pyramidal nanopores. This study consists of three complementary approaches, i.e., an analytical model for induced surface charge, numerical simulation of induced surface charge, electroosmotic flow, and ionic current, and experimental validation with respect to the ionic current. The induced surface charge is generated by polarization in the dielectric membrane as a response to the applied electric field. This charge generation results in a nonuniform density of surface charge along the nanopore sidewall. It further causes ions in the electrolyte to redistribute, leading to a massive accumulation of single-polarity ions in the EDL and their counterions near the smaller opening of the nanopore. It also alters electrohydrodynamic properties in the nanopore, giving rise to the formation of electroosmotic vortexes in the vicinity of the smaller opening of the nanopore. Finally, the pattern of the electroosmotic flow can significantly influence the transport properties of the nanopore.

Mechanism and Kinetics of Lipid Bilayer Formation in Solid-State Nanopores.

Solid-state nanopores provide a highly versatile platform for rapid electrical detection and analysis of single molecules. Lipid bilayer coating of the nanopores can reduce nonspecific analyte adsorption to the nanopore sidewalls and increase the sensing selectivity by providing possibilities for tethering specific ligands in a cell-membrane mimicking environment. However, the mechanism and kinetics of lipid bilayer formation from vesicles remain unclear in the presence of nanopores. In this work, we used a silicon-based, truncated pyramidal nanopore array as the support for lipid bilayer formation. Lipid bilayer formation in the nanopores was monitored in real time by the change in ionic current through the nanopores. Statistical analysis revealed that a lipid bilayer is formed from the instantaneous rupture of individual vesicle upon adsorption in the nanopores, differing from the generally agreed mechanism that lipid bilayer forms at a high vesicle surface coverage on a planar support. The dependence of the lipid bilayer formation process on the applied bias, vesicle size, and concentration was systematically studied. In addition, the nonfouling properties of the lipid bilayer coated nanopores were demonstrated during long single-stranded DNA translocation through the nanopore array. The findings indicate that the lipid bilayer formation process can be modulated by introducing nanocavities intentionally on the planar surface to create active sites or changing the vesicle size and concentration.

On Rectification of Ionic Current in Nanopores.

Rectification of ionic current, a frequently observed phenomenon with asymmetric nanopores varying in geometry and/or surface charge, has been utilized for studies of microfluidic circuits, nanopore sensors, and energy conversion devices. However, the physics behind the rectification phenomenon deserves further analysis, and the involved processes need renewed organization; however, the origin is known, and numerous simulations based on the Poisson-Nernst-Planck formalism provide details of the observation. Here, we present an analytical model by identifying the causal chain connecting the key physical factors and processes leading to rectification: the charge present on the pore sidewalls causing the selectivity of ion fluxes through the pore, the selectivity inducing enrichment-depletion of ions around the pore, and the established ion concentration gradient rendering the electric field redistribution in the pore. Our analytical model that considers nanopore geometry, surface charge density, and electrolyte concentration calculates the ionic current and corresponding rectification factor at given bias voltages. The model is validated by numerical simulations, and the model results agree well with experimental data. It is, therefore, a useful tool not only for gaining physical insights into ionic current rectification but also for providing practical guidelines in designing nanopore- and nanopipette-based ion sensors for a range of applications.

Structural Changes of Mercaptohexanol Self-Assembled Monolayers on Gold and Their Influence on Impedimetric Aptamer Sensors.

Despite a large number of publications describing biosensors based on electrochemical impedance spectroscopy (EIS), little attention has been paid to the stability and reproducibility issues of the sensor interfaces. In this work, the stability and reproducibility of faradaic EIS analyses on the aptamer/mercaptohexanol (MCH) self-assembled monolayer (SAM)-functionalized gold surfaces in ferri- and ferrocyanide solution were systematically evaluated prior to and after the aptamer-probe DNA hybridization. It is shown that the EIS data exhibited significant drift, and this significantly affected the reproducibility of the EIS signal of the hybridization. As a result, no significant difference between the charge transfer resistance (RCT) changes induced by the aptamer-target DNA hybridization and that caused by the drift could be identified. A conditioning of the electrode in the measurement solution for more than 12 h was required to reach a stable RCT baseline prior to the aptamer-probe DNA hybridization. The monitored drift in RCT and double layer capacitance during the conditioning suggests that the MCH SAM on the gold surface reorganized to a thinner but more closely packed layer. We also observed that the hot binding buffer used in the following aptamer-probe DNA hybridization process could induce additional MCH and aptamer reorganization, and thus further drift in RCT. As a result, the RCT change caused by the aptamer-probe DNA hybridization was less than that caused by the hot binding buffer (blank control experiment). Therefore, it is suggested that the use of high temperature in the EIS measurement should be carefully evaluated or avoided. This work provides practical guidelines for the EIS measurements. Moreover, because SAM-functionalized gold electrodes are widely used in biosensors, for example, DNA sensors, an improved understanding of the origin of the observed drift is very important for the development of well-functioning and reproducible biosensors.

Controlled size reduction and its underlying mechanism to form solid-state nanopores via electron beam induced carbon deposition.

Solid-state nanopores have drawn considerable attention for their potential applications in DNA sequencing and nanoparticle analysis. However, fabrication of nanopores, especially those of diameter below 30 nm, requires sophisticated techniques. Here, a versatile method to controllably reduce the diameter of prefabricated large-size pores down to sub-30 nm without greatly increasing the effective pore depth from the original membrane thickness is shown. This method exploits carbon deposition achieved via hydrocarbon evaporation, induced by an incident beam of electrons, and subsequent dissociation of hydrocarbon to solid carbon deposits. The carbon deposition employs a conventional scanning electron microscope equipped with direct visual feedback, along with a stable hydrocarbon source nearby the sample. This work systematically studies how electron beam accelerating voltage, imaging magnification, initial pore size and membrane composition affect the process of pore size reduction. Secondary electrons generated in the membrane material are confirmed to be the main cause of the dissociation of hydrocarbon. Thicker carbon deposited on one side than on the other of the membrane results in an asymmetric nanopore shape and a rectifying ionic transport. A physico-phenomenological model combined with Monte Carlo simulations is proposed to account for the observed carbon deposition behaviors.

Group Behavior of Nanoparticles Translocating Multiple Nanopores.

Nanopores have been implemented as nanosensors for DNA sequencing, biomolecule inspection, chemical analysis, nanoparticle detection, etc. For high-throughput and parallelized measurement using nanopore arrays, individual addressability has been a crucial technological solution in order to enable scrutiny of signals generated at each and every nanopore. Here, an alternative pathway of employing arrayed nanopores to perform sensor functions is investigated by examining the group behavior of nanoparticles translocating multiple nanopores. As no individual addressability is required, fabrication of nanopore devices along with microfluidic cells and readout circuits can be greatly simplified. Experimentally, arrays of less than 10 pores are shown to be capable of analyzing translocating nanoparticles with a good signal-to-noise margin. According to theoretical predictions, more pores (than 10) per array can perform high-fidelity analysis if the noise level of the measurement system can be better controlled. More pores per array would also allow for faster measurement at lower concentration because of larger capture cross sections for target nanoparticles. By experimentally varying the number of pores, the concentration of nanoparticles, or the applied bias voltage across the nanopores, we have identified the basic characteristics of this multievent process. By characterizing average pore current and associated standard deviation during translocation and by performing physical modeling and extensive numerical simulations, we have shown the possibility of determining the size and concentration of two kinds of translocating nanoparticles over 4 orders of magnitude in concentration. Hence, we have demonstrated the potential and versatility of the multiple-nanopore approach for high-throughput nanoparticle detection.

On nanopore DNA sequencing by signal and noise analysis of ionic current.

DNA sequencing, i.e., the process of determining the succession of nucleotides on a DNA strand, has become a standard aid in biomedical research and is expected to revolutionize medicine. With the capability of handling single DNA molecules, nanopore technology holds high promises to become speedier in sequencing at lower cost than what are achievable with the commercially available optics- or semiconductor-based massively parallelized technologies. Despite tremendous progress made with biological and solid-state nanopores, high error rates and large uncertainties persist with the sequencing results. Here, we employ a nano-disk model to quantitatively analyze the sequencing process by examining the variations of ionic current when a DNA strand translocates a nanopore. Our focus is placed on signal-boosting and noise-suppressing strategies in order to attain the single-nucleotide resolution. Apart from decreasing pore diameter and thickness, it is crucial to also reduce the translocation speed and facilitate a stepwise translocation. Our best-case scenario analysis points to severe challenges with employing plain nanopore technology, i.e., without recourse to any signal amplification strategy, in achieving sequencing with the desired single-nucleotide resolution. A conceptual approach based on strand synthesis in the nanopore of the translocating DNA from single-stranded to double-stranded is shown to yield a 10-fold signal amplification. Although it involves no advanced physics and is very simple in mathematics, this simple model captures the essence of nanopore sequencing and is useful in guiding the design and operation of nanopore sequencing.

Understanding Electrophoresis and Electroosmosis in Nanopore Sensing with the Help of the Nanopore Electro-Osmotic Trap.

Nanopore technology is widely used for sequencing DNA, RNA, and peptides with single-molecule resolution, for fingerprinting single proteins, and for detecting metabolites. However, the molecular driving forces controlling the analyte capture, its residence time, and its escape have remained incompletely understood. The recently developed Nanopore Electro-Osmotic trap (NEOtrap) is well fit to study these basic physical processes in nanopore sensing, as it reveals previously missed events. Here, we use the NEOtrap to quantitate the electro-osmotic and electrophoretic forces that act on proteins inside the nanopore. We establish a physical model to describe the capture and escape processes, including the trapping energy potential. We verified the model with experimental data on CRISPR dCas9-RNA-DNA complexes, where we systematically screened crucial modeling parameters such as the size and net charge of the complex. Tuning the balance between electrophoretic and electro-osmotic forces in this way, we compare the trends in the kinetic parameters with our theoretical models. The result is a comprehensive picture of the major physical processes in nanopore trapping, which helps to guide the experiment design and signal interpretation in nanopore experiments.

Palmitic acid reduces the methylation of the FOXO1 promoter to suppress the development of diffuse large B-cell lymphoma via modulating the miR-429/DNMT3A axis.

Diffuse large B-cell lymphoma (DLBCL) is characterized by significant treatment resistance. Palmitic acid (PA) has shown promising antitumor properties. This study aims to elucidate the molecular mechanisms by which PA influences DLBCL progression. We quantified the expression levels of microRNAs (miRNAs), Forkhead box protein O1 (FOXO1), and DNA methyltransferase 3A (DNMT3A) in both untreated and PA-treated DLBCL tumors and cell lines. Assessments were made of cell viability, apoptosis, and autophagy-related protein expression following PA administration. Interaction analyses among miR-429, DNMT3A, and FOXO1 were conducted using luciferase reporter assays and methylation-specific (MSP) Polymerase chain reaction (PCR). After transfecting the miR-429 inhibitor, negative control (NC) inhibitor, shRNA against DNMT3A (sh-DNMT3A), shRNA negative control (sh-NC), overexpression vector for DNMT3A (oe-DNMT3A), or overexpression negative control (oe-NC), we evaluated the effects of miR-429 and DNMT3A on cell viability, mortality, and autophagy-related protein expression in PA-treated DLBCL cell lines. The efficacy of PA was also tested in vivo using DLBCL tumor-bearing mouse models. MiR-429 and FOXO1 expression levels were downregulated, whereas DNMT3A was upregulated in DLBCL compared to the control group. PA treatment was associated with enhanced autophagy, mediated by the upregulation of miR-429 and downregulation of DNMT3A. The luciferase reporter assay and MSP confirmed that miR-429 directly inhibits DNMT3A, thereby reducing FOXO1 methylation. Subsequent experiments demonstrated that PA promotes autophagy and inhibits DLBCL progression by upregulating miR-429 and modulating the DNMT3A/FOXO1 axis. In vivo PA significantly reduced the growth of xenografted tumors through its regulatory impact on the miR-429/DNMT3A/FOXO1 axis. Palmitic acid may modulate autophagy and inhibit DLBCL progression by targeting the miR-429/DNMT3A/FOXO1 signaling pathway, suggesting a novel therapeutic target for DLBCL management.

Brownian Motion Paving the Way for Molecular Translocation in Nanopores.

Tracing fast nanopore-translocating analytes requires a high-frequency measurement system that warrants a temporal resolution better than 1 µs. This constraint may practically shift the challenge from increasing the sampling bandwidth to dealing with the rapidly growing noise with frequencies typically above 10 kHz, potentially making it still uncertain if all translocation events are unambiguously captured. Here, a numerical simulation model is presented as an alternative to discern translocation events with different experimental settings including pore dimension, bias voltage, the charge state of the analyte, salt concentration, and electrolyte viscosity. The model allows for simultaneous analysis of forces exerting on a large analyte cohort along their individual trajectories; these forces are responsible for the analyte movement leading eventually to the nanopore translocation. Through tracing the analyte trajectories, the Brownian force is found to dominate the analyte movement in electrolytes until the last moment at which the electroosmotic force determines the final translocation act. The mean dwell time of analytes mimicking streptavidin decreases from ≈6 to ≈1 µs with increasing the bias voltage from ±100 to ±500 mV. The simulated translocation events qualitatively agree with the experimental data with streptavidin. The simulation model is also helpful for the design of new solid-state nanopore sensors.

Resolving sulfation PTMs on a plant peptide hormone using nanopore sequencing.

Peptide phytohormones are decorated with post-translational modifications (PTMs) that are crucial for receptor recognition. Tyrosine sulfation on these hormones is essential for plant growth and development1. Measuring the occurrence and position of sulfotyrosine is, however, compromised by major technical challenges during isolation and detection2. We recently introduced a nanopore peptide sequencing method that sensitively detects PTMs at the single-molecule level3. By translocating PTM variants of the plant pentapeptide hormone phytosulfokine (PSK) through a nanopore, we here demonstrate accurate identification of sulfation and phosphorylation on the two tyrosine residues of PSK. Sulfation can be clearly detected and distinguished (>90%) from phosphorylation on the same residue. Moreover, the presence or absence of PTMs on the two close-by tyrosine residues can be accurately determined (>96% accuracy). Our findings demonstrate the extraordinary sensitivity of nanopore protein measurements, providing a new tool for identifying sulfation on peptide phytohormones and promising wider applications to identify protein PTMs.

Spike timing-based coding in neuromimetic tactile system enables dynamic object classification.

Rapid processing of tactile information is essential to human haptic exploration and dexterous object manipulation. Conventional electronic skins generate frames of tactile signals upon interaction with objects. Unfortunately, they are generally ill-suited for efficient coding of temporal information and rapid feature extraction. In this work, we report a neuromorphic tactile system that uses spike timing, especially the first-spike timing, to code dynamic tactile information about touch and grasp. This strategy enables the system to seamlessly code highly dynamic information with millisecond temporal resolution on par with the biological nervous system, yielding dynamic extraction of tactile features. Upon interaction with objects, the system rapidly classifies them in the initial phase of touch and grasp, thus paving the way to fast tactile feedback desired for neuro-robotics and neuro-prosthetics.

Traits of Patients With Pituitary Tumors in Multiple Endocrine Neoplasia Type 1 and Comparing Different Mutation Status.

CONTEXT: Recent studies suggest that the clinical characteristics and biological behavior of pituitary tumors (PITs) in patients with multiple endocrine neoplasia type 1 (MEN1) may not be as aggressive as previously reported. Increased imaging of the pituitary as recommended by screening guidelines identifies more tumors, potentially at an earlier stage. However, it is unknown if these tumors have different clinical characteristics in different MEN1 mutations. OBJECTIVE: To assess characteristics of patients with MEN1 with and without PITs, and compare among different MEN1 mutations. METHODS: Data of patients with MEN1 in a tertiary referral center from 2010 to 2023 were retrospectively analyzed. RESULTS: Forty-two patients with MEN1 were included. Twenty-four patients had PITs, 3 of which were invasive and managed with transsphenoidal surgery. One PIT enlarged during follow-up. Patients with PITs had a higher median age at MEN1 diagnosis than those without PITs. MEN1 mutations were identified in 57.1% of patients, including 5 novel mutations. In patients with PITs, those with MEN1 mutations (mutation+/PIT+ group) had more additional MEN1-associated tumors than those without (mutation-/PIT+ group). The mutation+/PIT+ group had a higher incidence of adrenal tumors and a lower median age at initial manifestation of MEN1 than the mutation-/PIT+ group. The most common neuroendocrine neoplasm was nonfunctional in the mutation+/PIT+ group and insulin-secreting in the mutation-/PIT+ group. CONCLUSION: This is the first study comparing characteristics of patients with MEN1 with and without PITs harboring different mutations. Patients without MEN1 mutations tended to have less organ involvement and it might be reasonable for them to receive less intensive follow-up.

A Generalized Transformer-Based Pulse Detection Algorithm.

Pulse-like signals are ubiquitous in the field of single molecule analysis, e.g., electrical or optical pulses caused by analyte translocations in nanopores. The primary challenge in processing pulse-like signals is to capture the pulses in noisy backgrounds, but current methods are subjectively based on a user-defined threshold for pulse recognition. Here, we propose a generalized machine-learning based method, named pulse detection transformer (PETR), for pulse detection. PETR determines the start and end time points of individual pulses, thereby singling out pulse segments in a time-sequential trace. It is objective without needing to specify any threshold. It provides a generalized interface for downstream algorithms for specific application scenarios. PETR is validated using both simulated and experimental nanopore translocation data. It returns a competitive performance in detecting pulses through assessing them with several standard metrics. Finally, the generalization nature of the PETR output is demonstrated using two representative algorithms for feature extraction.

Docking and Activity of DNA Polymerase on Solid-State Nanopores.

Integration of motor enzymes with biological nanopores has enabled commercial DNA sequencing technology; yet studies of the similar principle applying to solid-state nanopores are limited. Here, we demonstrate the real-life monitoring of phi29 DNA polymerase (DNAP) docking onto truncated-pyramidal nanopore (TPP) arrays through both electrical and optical readout. To achieve effective docking, atomic layer deposition of hafnium oxide is employed to reduce the narrowest pore opening size of original silicon (Si) TPPs to sub-10 nm. On a single TPP with pore opening size comparable to DNAP, ionic current measurements show that a polymerase-DNA complex can temporally dock onto the TPP with a certain docking orientation, while the majority become translocation events. On 5-by-5 TPP arrays, a label-free optical detection method using Ca2+ sensitive dye, are employed to detect the docking dynamics of DNAP. The results show that this label-free detection strategy is capable of accessing the docking events of DNAP on TPP arrays. Finally, we examine the activity of docked DNAP by performing on-site rolling circle amplification to synthesize single-stranded DNA (ssDNA), which serves as a proof-of-concept demonstration of utilizing this docking scheme for emerging nanopore sensing applications.

Flexible conductive silk-PPy hydrogel toward wearable electronic strain sensors.

Conductive hydrogels have been studied as promising materials for the flexible and wearable bioelectronics, because of their unique electrical and mechanical properties. Addition of conducting polymers in biomaterial-based hydrogel matrix is a simple yet effective way to construct hydrogels with good conductivity and flexibility. In this work, a conductive hydrogel composed by a silk hydrogel and a conducting polymer, polypyrrole (PPy), is developed viain situpolymerization of pyrrole into the silk fibroin network. The silk-PPy hydrogel shows high conductivity (26 S m-1), as well as sensitive and fast responses to corresponding conformation changes. Taking advantages of these properties, flexible and wearable strain sensors are proposed for the monitoring of various body movements, which can detect both the large and subtle human motions with good sensitivity, reproducibility and stability. The hybridization of biomaterials and conducting polymers endows the multifunctions of the conductive hydrogels, thus showing considerable potentials in the advancement of the wearable electronics.

Flexible conductive silk-PPy hydrogel toward wearable electronic strain sensors.

Conductive hydrogels have been studied as promising materials for the flexible and wearable bioelectronics, because of their unique electrical and mechanical properties. Addition of conducting polymers in biomaterial-based hydrogel matrix is a simple yet effective way to construct hydrogels with good conductivity and flexibility. In this work, a conductive hydrogel composed by a silk hydrogel and a conducting polymer, polypyrrole (PPy), is developed via in-situ polymerization of pyrrole into the silk fibroin network. The silk-PPy hydrogel shows high conductivity (26 S/m), as well as sensitive and fast responses to corresponding conformation changes. Taking advantages of these properties, flexible and wearable strain sensors are proposed for the monitoring of various body movements, which can detect both the large and subtle human motions with good sensitivity, reproducibility and stability. The hybridization of biomaterials and conducting polymers endows the multifunctions of the conductive hydrogels, thus showing considerable potentials in the advancement of the wearable electronics.

A Guide to Signal Processing Algorithms for Nanopore Sensors.

Nanopore technology holds great promise for a wide range of applications such as biomedical sensing, chemical detection, desalination, and energy conversion. For sensing performed in electrolytes in particular, abundant information about the translocating analytes is hidden in the fluctuating monitoring ionic current contributed from interactions between the analytes and the nanopore. Such ionic currents are inevitably affected by noise; hence, signal processing is an inseparable component of sensing in order to identify the hidden features in the signals and to analyze them. This Guide starts from untangling the signal processing flow and categorizing the various algorithms developed to extracting the useful information. By sorting the algorithms under Machine Learning (ML)-based versus non-ML-based, their underlying architectures and properties are systematically evaluated. For each category, the development tactics and features of the algorithms with implementation examples are discussed by referring to their common signal processing flow graphically summarized in a chart and by highlighting their key issues tabulated for clear comparison. How to get started with building up an ML-based algorithm is subsequently presented. The specific properties of the ML-based algorithms are then discussed in terms of learning strategy, performance evaluation, experimental repeatability and reliability, data preparation, and data utilization strategy. This Guide is concluded by outlining strategies and considerations for prospect algorithms.