Giant pyroelectricity in nanomembranes.

Pyroelectricity describes the generation of electricity by temporal temperature change in polar materials1-3. When free-standing pyroelectric materials approach the 2D crystalline limit, how pyroelectricity behaves remained largely unknown. Here, using three model pyroelectric materials whose bonding characters along the out-of-plane direction vary from van der Waals (In2Se3), quasi-van der Waals (CsBiNb2O7) to ionic/covalent (ZnO), we experimentally show the dimensionality effect on pyroelectricity and the relation between lattice dynamics and pyroelectricity. We find that, for all three materials, when the thickness of free-standing sheets becomes small, their pyroelectric coefficients increase rapidly. We show that the material with chemical bonds along the out-of-plane direction exhibits the greatest dimensionality effect. Experimental observations evidence the possible influence of changed phonon dynamics in crystals with reduced thickness on their pyroelectricity. Our findings should stimulate fundamental study on pyroelectricity in ultra-thin materials and inspire technological development for potential pyroelectric applications in thermal imaging and energy harvesting.

Liquid-Phase van der Waals Epitaxy of a Few-Layer and Unit-Cell Thick Ruddlesden-Popper Halide Perovskite.

2D Ruddlesden-Popper (RP) halide perovskites with natural multiple quantum well structures are an ideal platform to integrate into vertical heterostructures, which may introduce plentiful intriguing optoelectronic properties that are not accessible in a single bulk crystal. Here, we report liquid-phase van der Waals epitaxy of a 2D RP hybrid perovskite (4,4-DFPD)2PbI4 (4,4-DFPD is 4,4-difluoropiperidinium) on muscovite mica and fabricate a series of perovskite-perovskite vertical heterostructures by integrating it with a second 2D RP perovskite R-NPB [NPB = 1-(1-naphthyl)ethylammonium lead bromide] sheets. The grown (4,4-DFPD)2PbI4 nanobelt array can be multiple layers to unit-cell thin and are crystallographically aligned on the mica substrate. An interlayer photo emission in this R-NPB/(4,4-DFPD)2PbI4 heterostructure with a lifetime of about 25 ns at 120 K has been revealed. Our demonstration of epitaxial (4,4-DFPD)2PbI4 array grown on mica via liquid-phase van der Waals epitaxy provides a paradigm to prepare orderly distributed 2D RP hybrid perovskites for further integration into multiple heterostructures. The discovery of a new interlayer emission in the R-NPB/(4,4-DFPD)2PbI4 heterostructure enriches the basic understanding of interlayer charge transition in halide perovskite systems.

Flexible tungsten disulfide superstructure engineering for efficient alkaline hydrogen evolution in anion exchange membrane water electrolysers.

Anion exchange membrane (AEM) water electrolysis employing non-precious metal electrocatalysts is a promising strategy for achieving sustainable hydrogen production. However, it still suffers from many challenges, including sluggish alkaline hydrogen evolution reaction (HER) kinetics, insufficient activity and limited lifetime of non-precious metal electrocatalysts for ampere-level-current-density alkaline HER. Here, we report an efficient alkaline HER strategy at industrial-level current density wherein a flexible WS2 superstructure is designed to serve as the cathode catalyst for AEM water electrolysis. The superstructure features bond-free van der Waals interaction among the low Young's modulus nanosheets to ensure excellent mechanical flexibility, as well as a stepped edge defect structure of nanosheets to realize high catalytic activity and a favorable reaction interface micro-environment. The unique flexible WS2 superstructure can effectively withstand the impact of high-density gas-liquid exchanges and facilitate mass transfer, endowing excellent long-term durability under industrial-scale current density. An AEM electrolyser containing this catalyst at the cathode exhibits a cell voltage of 1.70 V to deliver a constant catalytic current density of 1 A cm-2 over 1000 h with a negligible decay rate of 9.67 µV h-1.

Vertically Aligned One-Dimensional Crystal-Structured Sb2Se3 for High-Efficiency Flexible Solar Cells via Regulating Selenization Kinetics.

Recently, antimony selenide (Sb2Se3) has exhibited an exciting potential for flexible photoelectric applications due to its unique one-dimensional (1D) chain-type crystal structure, low-cost constituents, and superior optoelectronic properties. The 1D structure endows Sb2Se3 with a strong anisotropy in carrier transport and a lasting mechanical deformation tolerance. The control of the crystalline orientation of the Sb2Se3 film is an essential requirement for its device performance optimization. However, the current state-of-the-art Sb2Se3 devices suffer from unsatisfactory orientation control, especially for the (001) orientation, in which the chains stand vertically. Herein, we achieved an unprecedented control of the (001) orientation for the growth of the Sb2Se3 film on a flexible Mo-coated mica substrate by balancing the collision rate and kinetic energy of Se vapor particles with the surface of Sb film by regulating the selenization kinetics. Based on this (001)-oriented Sb2Se3 film, a high efficiency of 8.42% with a record open-circuit voltage (VOC) of 0.47 V is obtained for flexible Sb2Se3 solar cells. The vertical van der Waals gaps in the (001) orientation provide favorable diffusion paths for Se atoms, which results in a Se-rich state at the bottom of the Sb2Se3 film and promotes the in situ formation of the MoSe2 interlayer between Mo and Sb2Se3. These phenomena contribute to a back-surface field enhanced absorber layer and a quasi-Ohmic back contact, improving the device's VOC and the collection of carriers. This method provides an effective strategy for the orientation control of 1D materials for efficient photoelectric devices.

Orientation-Controlled Large-Area Epitaxial PbI2 Thin Films with Tunable Optical Properties.

Lead iodide (PbI2) as a layered material has emerged as an excellent candidate for optoelectronics in the visible and ultraviolet regime. Micrometer-sized flakes synthesized by mechanical exfoliation from bulk crystals or by physical vapor deposition have shown a plethora of applications from low-threshold lasing at room temperature to high-performance photodetectors with large responsivity and faster response. However, large-area centimeter-sized growth of epitaxial thin films of PbI2 with well-controlled orientation has been challenging. Additionally, the nature of grain boundaries in epitaxial thin films of PbI2 remains elusive. Here, we use mica as a model substrate to unravel the growth mechanism of large-area epitaxial PbI2 thin films. The partial growth leading to uncoalesced domains reveals the existence of inversion domain boundaries in epitaxial PbI2 thin films on mica. Combining the experimental results with first-principles calculations, we also develop an understanding of the thermodynamic and kinetic factors that govern the growth mechanism, which paves the way for the synthesis of high-quality large-area PbI2 on other substrates and heterostructures of PbI2 on single-crystalline graphene. The ability to reproducibly synthesize high-quality large-area thin films with precise control over orientation and tunable optical properties could open up unique and hitherto unavailable opportunities for the use of PbI2 and its heterostructures in optoelectronics, twistronics, substrate engineering, and strain engineering.

High-Crystallinity Epitaxial Sb2Se3 Thin Films on Mica for Flexible Near-Infrared Photodetectors.

The V-VI binary chalcogenide, Sb2Se3, has attracted considerable attention for its applications in thin film optoelectronic devices because of its unique 1D structure and remarkable optoelectronic properties. Herein, we report an Sb2Se3 thin film epitaxially grown on a flexible mica substrate through a relatively weak (van der Waals) interaction by vapor transport deposition. The epitaxial Sb2Se3 thin films exhibit a single (120) out-of-plane orientation and a 0.25° full width at half-maximum of (120) rocking curve in X-ray diffraction, confirming the high crystallinity of the epitaxial films. The Sb2Se3(120) plane is epitaxially aligned on mica(001) surface with the in-plane relationship of Sb2Se3[2̅10]//mica[010] and Sb2Se3[001]//mica[100]. Compared to the photodetector made of a nonepitaxial Sb2Se3 film, the photocurrent of the epitaxial Sb2Se3 film photodetector is almost doubled. Furthermore, because of the flexibility and high sensitivity of the epitaxial Sb2Se3 film photodetector on mica, it has been successfully employed to detect the heart rate of a person. These encouraging results will facilitate the development of epitaxial Sb2Se3 film-based devices and potential applications in wearable electronics.

Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency.

Antimony selenide is an emerging promising thin film photovoltaic material thanks to its binary composition, suitable bandgap, high absorption coefficient, inert grain boundaries and earth-abundant constituents. However, current devices produced from rapid thermal evaporation strategy suffer from low-quality film and unsatisfactory performance. Herein, we develop a vapor transport deposition technique to fabricate antimony selenide films, a technique that enables continuous and low-cost manufacturing of cadmium telluride solar cells. We improve the crystallinity of antimony selenide films and then successfully produce superstrate cadmium sulfide/antimony selenide solar cells with a certified power conversion efficiency of 7.6%, a net 2% improvement over previous 5.6% record of the same device configuration. We analyze the deep defects in antimony selenide solar cells, and find that the density of the dominant deep defects is reduced by one order of magnitude using vapor transport deposition process.