SINGLE INSTITUTION VARIABILITY IN INTENSITY MODULATED RADIATION TARGET DELINEATION FOR CANINE NASAL NEOPLASIA.

Contouring variability is a significant barrier to the accurate delivery and reporting of radiation therapy. The aim of this descriptive study was to determine the variation in contouring radiation targets and organs at risk by participants within our institution. Further, we also aimed to determine if all individuals contoured the same normal tissues. Two canine nasal tumor datasets were selected and contoured by two ACVR-certified radiation oncologists and two radiation oncology residents from the same institution. Eight structures were consistently contoured including the right and left eye, the right and left lens, brain, the gross tumor volume (GTV), clinical target volume (CTV), and planning target volume (PTV). Spinal cord, hard and soft palate, and bulla were contoured on 50% of datasets. Variation in contouring occurred in both targets and normal tissues at risk and was particularly significant for the GTV, CTV, and PTV. The mean metric score and dice similarity coefficient were below the threshold criteria in 37.5-50% and 12.5-50% of structures, respectively, quantitatively indicating contouring variation. This study refutes our hypothesis that minimal variation in target and normal tissue delineation occurs. The variation in contouring may contribute to different tumor response and toxicity for any given patient. Our results also highlight the difficulty associated with replication of published radiation protocols or treatments, as even with replete contouring description the outcome of treatment is still fundamentally influenced by the individual contouring the patient.

Genome-wide association study for oat (Avena sativa L.) beta-glucan concentration using germplasm of worldwide origin.

Detection of quantitative trait loci (QTL) controlling complex traits followed by selection has become a common approach for selection in crop plants. The QTL are most often identified by linkage mapping using experimental F(2), backcross, advanced inbred, or doubled haploid families. An alternative approach for QTL detection are genome-wide association studies (GWAS) that use pre-existing lines such as those found in breeding programs. We explored the implementation of GWAS in oat (Avena sativa L.) to identify QTL affecting ß-glucan concentration, a soluble dietary fiber with several human health benefits when consumed as a whole grain. A total of 431 lines of worldwide origin were tested over 2 years and genotyped using Diversity Array Technology (DArT) markers. A mixed model approach was used where both population structure fixed effects and pair-wise kinship random effects were included. Various mixed models that differed with respect to population structure and kinship were tested for their ability to control for false positives. As expected, given the level of population structure previously described in oat, population structure did not play a large role in controlling for false positives. Three independent markers were significantly associated with ß-glucan concentration. Significant marker sequences were compared with rice and one of the three showed sequence homology to genes localized on rice chromosome seven adjacent to the CslF gene family, known to have ß-glucan synthase function. Results indicate that GWAS in oat can be a successful option for QTL detection, more so with future development of higher-density markers.

Digestion residues of typical and high-beta-glucan oat flours provide substrates for in vitro fermentation.

In vitro fermentabilities of the oat flour digestion residues (ODR) from two commercial oat lines with 4.7 and 5.3% beta-glucan and from two high-beta-glucan experimental lines with 7.6 and 8.1% beta-glucan were evaluated and compared with fermentations of lactulose, purified oat beta-glucan (POBG), and purified oat starch (POS). Substrates were fermented by using an in vitro batch fermentation system under anaerobic conditions for 24 h. The progress of the fermentation was studied by following the change in pH of the fermentation medium, production of short-chain fatty acids (SCFA) and gases, and consumption of carbohydrates. The substrate from the flour with the greatest amount of beta-glucan tended to have the greatest pH decline and the greatest total SCFA production. A significant correlation occurred between gas production and SCFA formation (R 2 = 0.89-0.99). Acetate was produced in the greatest amounts by all of the substrates except POBG, by which butyrate was produced in the greatest amount. More propionate and butyrate, but less acetate, were produced from high-beta-glucan ODR. With the given fermentation conditions, >80% of the total carbohydrate was depleted by the bacteria after 24 h. Glucose was the most rapidly consumed carbohydrate among other available monosaccharides in the fermentation medium. Overall, the high-beta-glucan experimental lines provided the best conditions for optimal in vitro gut fermentations.

High-amylose corn exhibits better antioxidant activity than typical and waxy genotypes.

The consumption of fruits, vegetables, and whole grains rich in antioxidative phytochemicals is associated with a reduced risk of chronic diseases such as cancer, coronary heart disease, diabetes, Alzheimer's disease, cataract, and aged-related functional decline. For example, phenolic acids are among the main antioxidative phytochemicals in grains that have been shown to be beneficial to human health. Corn (Zea mays L.) is a major staple food in several parts of the world; thus, the antioxidant activity of several corn types was evaluated. The 2,2-Diphenyl-1-picryhydrazyl free radical (DPPH*) scavenging activity, total phenolic content (TPC), antioxidant capacity of lipid-soluble substances (ACL), oxygen radical absorbance capacity (ORAC), and phenolic acid compositions of typical and mutant genotypes (typical-1, waxy, typical-2, and high-amylose) were investigated. The DPPH* scavenging activity at 60 min was 34.39-44.51% in methanol extracts and 60.41-67.26% in HCl/methanol (1/99, v/v) extracts of corn. The DPPH* scavenging activity of alkaline hydrolysates of corn ranged from 48.63 to 64.85%. The TPC ranged from 0.67 to 1.02 g and from 0.91 to 2.15 g of ferulic acid equiv/kg of corn in methanol and HCl/methanol extracts, respectively. The TPC of alkaline hydrolysates ranged from 2.74 to 6.27 g of ferulic acid equiv/kg of corn. The ACL values were 0.41-0.80 and 0.84-1.59 g of Trolox equiv/kg of corn in methanol and HCl/methanol extracts, respectively. The ORAC values were 10.57-12.47 and 18.76-24.92 g of Trolox equiv/kg of corn in methanol and HCl/methanol extracts, respectively. ORAC values of alkaline hydrolysates ranged from 42.85 to 68.31 g of Trolox equiv/kg of corn. The composition of phenolic acids in alkaline hydrolysates of corn was p-hydroxybenzoic acid (5.08-10.6 mg/kg), vanillic acid (3.25-14.71 mg/kg), caffeic acid (2.32-25.73 mg/kg), syringic acid (12.37-24.48 mg/kg), p-coumaric acid (97.87-211.03 mg/kg), ferulic acid (1552.48-2969.10 mg/kg), and o-coumaric acid (126.53-575.87 mg/kg). Levels of DPPH* scavenging activity, TPC, ACL, and ORAC in HCl/methanol extracts were obviously higher than those present in methanol extracts. There was no significant loss of antioxidant capacity when corn was dried at relatively high temperatures (65 and 93 degrees C) postharvest as compared to drying at ambient temperatures (27 degrees C). Alkaline hydrolysates showed very high TPC, ACL, and ORAC values when compared to methanol and HCl/methanol extracts. High-amylose corn had a better antioxidant capacity than did typical (nonmutant) corn genotypes.

In vitro bile acid binding activity within flour fractions from oat lines with typical and high beta-glucan amounts.

Whole flours from four oat lines with different amounts of beta-glucan (4.8-8.1%) were examined for their antioxidant activity and total phenolic and lignin concentrations. These data, along with the beta-glucan percentages, were compared with bile acid (BA) binding. Only the lignin concentrations of the flours significantly (P < 0.01) correlated with the BA binding values. The oat flours also were fractionated into bran, protein concentrate, starch, layer above starch, and soluble beta-glucan (SBG)-free flour, and their BA binding capacities were evaluated. The bran fractions were the only fractions that bound greater BA than did the whole oat flours on dry matter basis. Extraction of the soluble beta-glucan to create the SBG-free flour significantly (P < 0.01) decreased the BA binding of the remaining flour. These data suggest that BA binding of the oat flours involves the synergistic interactions of the oat components, with beta-glucan and lignin (insoluble fiber) having a great impact.

Preference for language of instruction of an English language learner with autism.

OBJECTIVE: To use a preference assessment to identify the preferred language of instruction (English or Spanish) for a child with autism living in a Spanish-speaking home and receiving school services in English only. METHODS: We used a concurrent chains method to evaluate the participant's preference for English or Spanish instruction. Colored microswitches represented English instruction, Spanish instruction and no instruction (control). Switch presses resulted in instruction and reinforcement in either English or Spanish, or no instruction and no reinforcement. After session 10, switches were reprogrammed to control for color bias. RESULTS: The participant chose Spanish instruction most frequently. CONCLUSIONS: The participant preferred to receive instruction in Spanish. These data support previous research indicating the importance of child preference when individualizing educational programs for children with autism and that language of instruction is an important variable when working with children with autism who experience multiple languages across home and school.

In vitro bile acid binding of flours from oat lines varying in percentage and molecular weight distribution of beta-glucan.

Two experimental high beta-glucan oat (Avena sativa) lines (7.64 and 8.05%) and two traditional lines (4.77 and 5.26% beta-glucan) were used to evaluate the effect of beta-glucan quantity and molecular weight on bile acid (BA) binding. The oat flour samples were digested by an in vitro system that simulated human digestion. No significant differences among oat type were found in the overall beta-glucan, starch, and pentosan digestibilities. Considering the standard, cholestyramine, as 100% bound, the relative BA binding for the oat flour samples on a dry matter basis was in the range of 7.5-14.8%, which is higher than the values determined for some other grains and plant materials in the literature. Although the high beta-glucan flours bound a high amount of BA, no significant correlations were found between beta-glucan content in the flours and BA binding. Significant correlations were found between BA binding and insoluble dietary fiber content. Partial hydrolysis with lichenase of the beta-glucan molecules did not affect the BA binding. A summary of all data suggested that BA binding is a multicomponent-dependent process.

Increased Butyrate Production During Long-Term Fermentation of In Vitro-Digested High Amylose Cornstarch Residues with Human Feces.

An in vitro semi-continuous long-term (3 wk) anaerobic incubation system simulating lower gut fermentation was used to determine variability in gut microbial metabolism between 4 predigested high amylose-resistant starch residues (SR): SRV, SRVI, SRVII, and SRGEMS in human fecal samples. Subjects participated twice, 5 mo apart: 30 in Phase I (15 lean, 9 overweight and 6 obese), 29 in Phase II (15 lean, 9 overweight, 5 obese); 13 of 15 lean subjects participated in both phases. Of the 4 SRs, SRV displayed the highest gelatinization temperature, peak temperature, enthalpy changes, and the least digestibility compared with the other SRs. In both phases, compared with blank controls, all SRs increased butyrate ∼2-fold which stabilized at week 2 and only SRV caused greater propionate concentration (∼30%) after 3 wk which might have been partly mediated by its lesser digestibility. Fecal samples from lean and overweight/obese subjects incubated with SRs showed similar short-chain fatty acid production across both time points, which suggests that resistant starch may benefit individuals across BMIs.

Ethnicity reporting practices for empirical research in three autism-related journals.

This review examines ethnicity reporting in three autism-related journals (Autism, Focus on Autism and Other Developmental Disabilities, and Journal of Autism and Developmental Disorders) over a 6-year period. A comprehensive multistep search of articles is used to identify ethnicity as a demographic variable in these three journals. Articles that identified research participants' ethnicity were further analyzed to determine the impact of ethnicity as a demographic variable on findings of each study. The results indicate that ethnicity has not been adequately reported in these three autism related journals even though previous recommendations have been made to improve inadequacies of descriptive information of research participants in autism research (Kistner and Robbins in J Autism Dev Disord 16:77-82, 1986). Implications for the field of autism spectrum disorders are discussed in addition to further recommendations for future research.

Impact of the molecular weight, viscosity, and solubility of ß-glucan on in vitro oat starch digestibility.

The impacts of the molecular weight (MW), viscosity, and solubility of ß-glucan on the rate of in vitro starch digestion and estimated glycemic index (GI) were evaluated. Extracted oat starch and ß-glucan suspensions with high, medium, and low MW were heated to gelatinize the starch. The viscosity increased and the solubility decreased with an increase in the MW of ß-glucan. The in vitro starch hydrolysis of the mixtures and a control, white bread, increased as the digestion time increased. As the MW of ß-glucan increased, the starch hydrolysis decreased during in vitro digestion. The in vitro estimated GI of the mixture without ß-glucan, determined from the starch hydrolysis rate, was 88.3 for Jim and 80.0 for N979, which decreased to 68.4 and 66.8, respectively, with the inclusion of high-MW ß-glucan. The estimated GI values were negatively correlated with the ß-glucan peak and final viscosities (r = -0.81 and -0.82). These results illustrated the importance of viscosity attributed to the ß-glucan MW on starch hydrolysis during in vitro digestion. These findings will help to develop new food products with a low GI by using oat ß-glucan.

Interactional effects of ß-glucan, starch, and protein in heated oat slurries on viscosity and in vitro bile acid binding.

Three major oat components, ß-glucan, starch, and protein, and their interactions were evaluated for the impact on viscosity of heated oat slurries and in vitro bile acid binding. Oat flour from the experimental oat line "N979" (7.45% ß-glucan) was mixed with water and heated to make oat slurry. Heated oat slurries were treated with α-amylase, lichenase, and/or proteinase to remove starch, ß-glucan, and/or protein. Oat slurries treated with lichenase or lichenase combined with α-amylase and/or proteinase reduced the molecular weight of ß-glucan. Heat and enzymatic treatment of oat slurries reduced the peak and final viscosities compared with the control. The control bound the least amount of bile acids (p < 0.05); heating of oat flour improved the binding. Heated oat slurries treated with lichenase or lichenase combined with α-amylase and/or proteinase bound the least amount of bile acid, indicating the contribution of ß-glucan to binding. Oat slurries treated with proteinase or proteinase and α-amylase together improved the bile acid binding, indicating the possible contribution of protein to binding. These results illustrate that ß-glucan was the major contributor to viscosity and in vitro bile acid binding in heated oat slurries; however, interactions with other components, such as protein and starch, indicate the importance of evaluating oat components as whole system.

In vitro digestion rate and estimated glycemic index of oat flours from typical and high ß-glucan oat lines.

The in vitro starch digestion rate and estimated glycemic index (GI) of oat flours and oat starches from typical and high ß-glucan oat lines were evaluated along with the impact of heating on starch digestion. Flour from oat lines ('Jim', 'Paul', IA95, and N979 containing 4.0, 5.3, 7.4, and 7.7% ß-glucan, respectively) was digested by pepsin and porcine pancreatin. To determine the impact of heating on starch digestion, oat slurries were prepared by mixing oat flour and water (1:8 ratio) and heating for 10 min prior to digestion. Viscosity, as measured on a Rapid Visco Analyzer, increased with increases in concentration and molecular weight of ß-glucan. The in vitro starch digestion of oat flours and a control, white bread made from wheat flour, increased as the digestion time increased. Starch digestion of oat flour was slower than that of the control (p < 0.05). Heat treatment of oat-flour slurries increased the starch digestion from a range of 31-39% to a range of 52-64% measured after 180 min of in vitro digestion. There were no differences in starch digestibility among oat starches extracted from the different oat lines. The GI, estimated by starch hydrolysis of oat flours, ranged from 61 to 67, which increased to a range of 77-86 after heating. Oat-flour slurries prepared from IA95 and N979 lines with high ß-glucan concentrations had lower GI values than did slurries made from Jim and Paul lines. Starch digestion was negatively correlated with ß-glucan concentrations in heated oat-flour slurries (R(2) = 0.92). These results illustrate that the oat soluble fiber, ß-glucan, slowed the rate of starch digestion. This finding will help to develop new food products with low GI by using oat ß-glucan.

Molecular weight and structure of water soluble (1→3), (1→4)-ß-glucans affect pasting properties of oat flours.

Seven experimental oat lines with high (5.9% to 7.2%), medium (5.3% to 5.5%), and low (4.4%) ß-glucan concentrations were evaluated for the effects of ß-glucan molecular weight (MW) and structure on viscosities of oat-flour slurries. The MW of ß-glucans was determined by size-exclusion high-performance liquid chromatography. The structural features of ß-glucans were measured by using fluorophore-assisted capillary-electrophoresis after complete hydrolysis with lichenase. The oat-slurry viscosities were measured on a Rapid Visco Analyser under 4 conditions: (1) without starch (amylolysis, removal of starch by α-amylase); (2) without ß-glucan (removal of ß-glucan by lichenase); (3) natural action of enzymes (autolysis, in sodium buffer); and (4) inhibition of enzymes (in silver nitrate solution). Excluding one line (regression outlier), significant correlations (P < 0.05) between peak MW of ß-glucan and viscosities of oat slurries were obtained under inhibition. The ratio of degree of polymerization (DP) 3/DP4 negatively correlated with viscosity under amylolysis, autolysis, and inhibition (P < 0.05). The amount of DP ≥ 5 negatively correlated with pasting final viscosity after ß-glucan removal by lichenase (P < 0.05). Positive correlations (P < 0.05) between the ratio of ß-(1→4)/ß-(1→3) linkages and viscosities under autolysis and inhibition were found. Overall, these findings demonstrated that the peak MW, ratio of DP3/DP4, amount of DP ≥ 5, and ratio of ß-(1→4)/ß-(1→3) linkages of ß-glucans impacted pasting properties of oat-flour slurries.

Optimizing the molecular weight of oat ß-glucan for in vitro bile acid binding and fermentation.

A previous study showed ß-glucan with low molecular weight (MW, 1.56×10(5) g/mol) bound more bile acid and produced greater amounts of short-chain fatty acids (SCFA) than did ß-glucan with high MW (Mn=6.87×10(5) g/mol). In the current study, ß-glucan extracted from oat flour was fractionated into six different MW levels (high MW, 7.09×10(5); low level 1 (L1), 3.48×10(5); L2, 2.42×10(5); L3, 1.61×10(5); L4, 0.87×10(5); and L5, 0.46×10(5) g/mol) and evaluated to find the optimum MW affecting in vitro bile acid binding and fermentation. The ß-glucan fractions with 2.42×10(5)-1.61×10(5) g/mol (L2 and L3) bound the greatest amounts of bile acid. After 24 h of fermentation, no differences were found in total SCFA formation among L1, L2, L3, and L4 fractions; however, the high MW and L5 MW fractions produced lower amounts of total SCFA. Thus, the optimum MW of ß-glucan to affect both hypocholesterolemic and antitumorigenic in vitro effects was in the range of 2.42×10(5)-1.61×10(5) g/mol. This MW range also was the most water-soluble among the MWs evaluated.

Patient factors that influence warfarin dose response.

Warfarin has long been the mainstay of oral anticoagulation therapy for the treatment and prevention of venous and arterial thrombosis. The narrow therapeutic index of warfarin, and the complex number of factors that influence international normalized ratio (INR) response, makes optimization of warfarin therapy challenging. Determination of the appropriate warfarin dose during initiation and maintenance therapy requires an understanding of patient factors that influence dose response: age, body weight, nutritional status, acute and chronic disease states, and changes in concomitant drug therapy and diet. This review will examine specific clinical factors that can affect the pharmacokinetics and pharmacodynamics of warfarin, as well as the role of pharmacogenetics in optimizing warfarin therapy.

In vitro bile-acid binding and fermentation of high, medium, and low molecular weight beta-glucan.

The impact of beta-glucan molecular weight (MW) on in vitro bile-acid binding and in vitro fermentation with human fecal flora was evaluated. beta-Glucan extracted from oat line 'N979-5-4' was treated with lichenase (1,3-1,4-beta-D-glucanase) to yield high (6.87x10(5) g/mol), medium (3.71x10(5) g/mol), and low (1.56x10(5) g/mol) MW fractions. The low MW beta-glucan bound more bile acid than did the high MW beta-glucan (p<0.05). If the positive control, cholestyramine, was considered to bind bile acid at 100%, the relative bile-acid binding of the original oat flour and the extracted beta-glucan with high, medium, and low MW was 15, 27, 24, and 21%, respectively. Significant effects of high, medium, and low MW beta-glucans on total SCFA were observed compared to the blank without substrate (p<0.05). There were no differences in pH changes and total gas production among high, medium, and low MW beta-glucans, and lactulose. The low MW beta-glucan produced greater amounts of SCFA than the high MW after 24 h of fermentation. Among the major SCFA, more propionate was produced from all MW fractions of extracted beta-glucans than from lactulose. In vitro fermentation of extracted beta-glucan fractions with different MW lowered pH and produced SCFA, providing potential biological function.

Individual and interactional effects of ß-glucan, starch, and protein on pasting properties of oat flours.

Seven experimental oat lines with high (6.2-7.2%), medium (5.5-5.9%), and low (4.4-5.3%) ß-glucan concentrations were evaluated for contributions of ß-glucan, starch, protein, and their interactions, to pasting properties of oat flours by using a Rapid Visco Analyser (RVA, Newport Scientific, Warriewood, NSW, Australia). Significant correlations (P < 0.05) between ß-glucan concentration and pasting parameters of oat slurries were obtained under autolysis without 1 h of incubation, inhibition, and amylolysis. The relative decrease of viscosity after enzymatic hydrolysis of ß-glucan correlated with ß-glucan concentration (P < 0.05). These data demonstrated the important contribution of ß-glucan to pasting. The relative decrease of viscosity after either amylolysis or enzymatic removal of protein correlated with ß-glucan concentration (P < 0.1), which might be explained by the considerable contribution of the interaction of ß-glucan with starch and protein, to pasting. The viscosity decrease by hydrolysis of protein was much greater than the actual viscosity remaining after hydrolysis of both ß-glucan and starch, reconfirming the importance of interactions between protein and other oat components to pasting. Optimal multiple linear regression (MLR) models were generated to predict key pasting parameters in both buffer without 1 h of incubation and silver nitrate solution by using a stepwise procedure. The ß-glucan concentration alone or together with the concentration of starch, rather than protein, was selected as the predictor under certain conditions. These results illustrated the major unit contribution of ß-glucan, secondary unit contribution of starch, and minimal unit contribution of protein to pasting.

In vitro fermentation of oat flours from typical and high beta-glucan oat lines.

Two publicly available oat (Avena sativa) lines, "Jim" and "Paul" (5.17 and 5.31% beta-glucan, respectively), and one experimental oat line "N979" (7.70% beta-glucan), were used to study the effect of beta-glucan levels in oat flours during simulated in vitro digestion and fermentation with human fecal flora obtained from different individuals. The oat flours were digested by using human digestion enzymes and fermented by batch fermentation under anaerobic conditions for 24 h. The fermentation progress was monitored by measuring pH, total gas, and short-chain fatty acid (SCFA) production. Significant effects of beta-glucan on the formation of gas and total SCFA were observed compared to the blank without substrate (P < 0.05); however, there were no differences in pH changes, total gas, and total SCFA production among oat lines (P > 0.05). Acetate, propionate, and butyrate were the main SCFA produced from digested oat flours during fermentation. More propionate and less acetate were produced from digested oat flours compared to lactulose. Different human fecal floras obtained from three healthy individuals had similar patterns in the change of pH and the production of gas during fermentation. Total SCFA after 24 h of fermentation were not different, but the formation rates of total SCFA differed between individuals. In vitro fermentation of digested oat flours with beta-glucan could provide favorable environmental conditions for the colon and these findings, thus, will help in developing oat-based food products with desirable health benefits.

Structure and function of starch and resistant starch from corn with different doses of mutant amylose-extender and floury-1 alleles.

Four corn types with different doses of mutant amylose-extender (ae) and floury-1 (fl1) alleles, in the endosperm, including no. 1, aeaeae; no. 2, fl1fl1fl1; no. 3, aeaefl1; and no. 4, fl1fl1ae, were developed for use in making Hispanic food products with high resistant starch (RS) content. The RS percentages in the native starch (NS) of 1-4 were 55.2, 1.1, 5.7, and 1.1%, respectively. All NS were evaluated for pasting properties with a rapid viscoanalyzer (RVA) and for thermal properties with a differential scanning calorimeter (DSC). NS 1 had a low peak viscosity (PV) caused by incomplete gelatinization, whereas NS 3 had the greatest PV and breakdown of all four starch types. On the DSC, NS 2 had the lowest onset temperature and greatest enthalpy. NS 1 and 3 had similar onset and peak temperatures, both higher than those of NS 2 and 4. The gel strength of NS heated with a RVA was evaluated by using a texture analyzer immediately after RVA heating (fresh, RVA-F) and after the gel had been stored at 4 degrees C for 10 days (retrograded, RVA-R). NS 1 gel was watery and had the lowest strength (30 g) among starch gel types. NS 3 gel, although exhibiting syneresis, had greater gel strength than NS 2 and 4. The structures of the NS, the RS isolated from the NS (RS-NS), the RS isolated from RVA-F (RS-RVA-F), and the RS isolated from RVA-R (RS-RVA-R) were evaluated by using size exclusion chromatography. NS 1 had a greater percentage of amylose (AM) (58.3%) than the other NS (20.4-26.8%). The RS from all NS types (RS-NS) had a lower percentage of amylopectin (AP) and a greater percentage of low molecular weight (MW) AM than was present in the original NS materials. The RS-RVA-R from all starches had no AP or high MW AM. The percentages of longer chain lengths (DP 35-60) of NS were greater in 1 and 3 than in 2 and 4, and the percentages of smaller chain lengths (DP 10-20) were greater in 2 and 4 than in 1 and 3. In general, NS 3 seemed to have inherited some pasting, thermal, and structural characteristics from both NS 1 and 2, but was distinctly different from 4.

Treatment of elopement in individuals with developmental disabilities: a systematic review.

We reviewed studies involving the treatment of elopement in individuals with developmental disabilities. Systematic searches of three electronic databases, journals, and reference lists identified 10 studies meeting the inclusion criteria. These studies were evaluated in terms of: (a) participants, (b) procedures used to assess elopement, (c) intervention procedures, (d) results of the intervention, and (e) certainty of evidence. Across the 10 studies, intervention was provided to a total of 53 participants aged 3-47 years. Assessment procedures included anecdotal staff reports, participant interviews, direct observation, and modified analog functional analysis. Intervention approaches included differential reinforcement, extinction, functional communication training, response blocking, non-contingent reinforcement, shaping, and scheduled exercise. Positive outcomes were reported in 80% of the reviewed studies. The evidence base suggests that function-based assessment (e.g. functional analysis procedures) and function-based treatments (e.g. functional communication training) may be most effective in the treatment of elopement in this population. Directions for future research are offered.