Effects of culture conditions on the size, morphology and wet density of spores of Bacillus cereus 569 and Bacillus megaterium QM B1551.

The influence of variable culture conditions on the size and wet density of spores of Bacillus cereus and Bacillus megaterium were examined in this work. Culture temperature and initial pH was shown to have a significant impact on the size of both species, with increasingly alkaline culture media and elevated culture temperatures resulting in spores that were, on average, up to 25% reduced in volume. Increasing concentrations of inorganic salts in sporulation media exerted differing effects on each species; whereas a fivefold increase in the concentration of all salts resulted in only minor differences to the dimensions of B. cereus spores, B. megaterium spores became more elongated, displaying an average increase in volume of almost 30%. Similarly, as the spore elongated to yield aspect ratios larger than 1·4, their shape changed from typical prolate spheroids to cylinders with hemispherical ends. In contrast with previous studies, culture conditions employed in this study exerted no discernible impact on the wet density of B. cereus or B. megaterium spores. SIGNIFICANCE AND IMPACT OF THE STUDY: Bacterial spores of the genera Bacillus and Clostridium represent nature's most durable cells in terms of their extreme resistance to a variety of deleterious environments. As a result, they are of concern in the food processing, healthcare and other sectors, and are of increasing biotechnological interest. Improved understanding of variance in spore size, morphology and density may aid the development of certain spore-associated applications (e.g. spore surface display) while contributing to active areas of research such as spore adhesion and resistance to heat.

Virtual milk for modelling and simulation of dairy processes.

The modeling of dairy processing using a generic process simulator suffers from shortcomings, given that many simulators do not contain milk components in their component libraries. Recently, pseudo-milk components for a commercial process simulator were proposed for simulation and the current work extends this pseudo-milk concept by studying the effect of both total milk solids and temperature on key physical properties such as thermal conductivity, density, viscosity, and heat capacity. This paper also uses expanded fluid and power law models to predict milk viscosity over the temperature range from 4 to 75°C and develops a succinct regressed model for heat capacity as a function of temperature and fat composition. The pseudo-milk was validated by comparing the simulated and actual values of the physical properties of milk. The milk thermal conductivity, density, viscosity, and heat capacity showed differences of less than 2, 4, 3, and 1.5%, respectively, between the simulated results and actual values. This work extends the capabilities of the previously proposed pseudo-milk and of a process simulator to model dairy processes, processing different types of milk (e.g., whole milk, skim milk, and concentrated milk) with different intrinsic compositions, and to predict correct material and energy balances for dairy processes.

Holt-Oram syndrome is caused by mutations in TBX5, a member of the Brachyury (T) gene family.

Holt-Oram syndrome is a developmental disorder affecting the heart and upper limb, the gene for which was mapped to chromosome 12 two years ago. We have now identified a gene for this disorder (HOS1). The gene (TBX5) is a member of the Brachyury (T) family corresponding to the mouse Tbx5 gene. We have identified six mutations, three in HOS families and three in sporadic HOS cases. Each of the mutations introduces a premature stop codon in the TBX5 gene product. Tissue in situ hybridization studies on human embryos from days 26 to 52 of gestation reveal expression of TBX5 in heart and limb, consistent with a role in human embryonic development.

A homeobox gene, HLXB9, is the major locus for dominantly inherited sacral agenesis.

Partial absence of the sacrum is a rare congenital defect which also occurs as an autosomal dominant trait; association with anterior meningocoele, presacral teratoma and anorectal abnormalities constitutes the Currarino triad (MIM 176450). Malformation at the caudal end of the developing notochord at approximately Carnegie stage 7 (16 post-ovulatory days), which results in aberrant secondary neurulation, can explain the observed pattern of anomalies. We previously reported linkage to 7q36 markers in two dominantly inherited sacral agenesis families. We now present data refining the initial subchromosomal localization in several additional hereditary sacral agenesis (HSA) families. We excluded several candidate genes before identifying patient-specific mutations in a homeobox gene, HLXB9, which was previously reported to map to 1q41-q42.1 and to be expressed in lymphoid and pancreatic tissues.

Characterising the structure of photosynthetic biofilms using fluid dynamic gauging.

A new configuration of the fluid dynamic gauging technique for measuring soft layers on surfaces was used to monitor the growth of a cyanobacterium, Synechococcus sp. WH 5701, on stainless steel (SS), glass and an indium tin oxide (ITO) on a polyethylene terephthalate (PET) substratum. The biofilm thickness increased steadily over 4 weeks and exhibited noticeable changes in microstructure and strength. The biofilms all exhibited a two-layer structure, with a compact layer next to the substratum and a loose layer above. Biofilms on ITO or SS exhibited cohesive failure when removed by fluid shear whereas those on glass exhibited adhesive failure. The technique is able to elucidate various aspects of biofilm behaviour, as illustrated by the action of a biocide (NaOCl) on a mature biofilm.

Developmental plasticity of human foetal femur-derived cells in pellet culture: self assembly of an osteoid shell around a cartilaginous core.

This study has examined the osteogenic and chondrogenic differentiation of human foetal femur-derived cells in 3-dimensional pellet cultures. After culture for 21-28 days in osteogenic media, the pellets acquired a unique configuration that consisted of an outer fibrous layer, an osteoid-like shell surrounding a cellular and cartilaginous region. This configuration is typical to the cross section of the foetal femurs at the same age and was not observed in pellets derived from adult human bone marrow stromal cells. Time course study showed that after 7-14 days, the cells of the inner cellular region were viable, proliferated rapidly, and were immuno-positive for c-myc, as well as for bone sialoprotein and type I collagen. After 21-28 days, the cells accumulated at the inner edge of the osteoid shell. The direction of osteoid formation thus differed from that of periosteal bone formation. Following micro-dissection of the human foetal femurs into epiphyses, bone cylinder and hypertrophic cartilage, epiphyseal chondrocytes and osteoblasts both gave rise to osteoid-shell forming cells. These studies demonstrate the developmental plasticity of human foetal skeletal and epiphyseal chondrocytes and suggest that the microenvironment modulates lineage commitment and matrix formation. Furthermore, this ex vivo model offers a new approach to delineate human bone development as well as a model with potential application for evaluation of therapeutic compounds for bone formation.

Chronological expression of Ciliated Bronchial Epithelium 1 during pulmonary development.

Ciliated Bronchial Epithelium (CBE) 1 is a novel gene, which is expressed in ciliated cells. As cilia are important during embryogenesis, the present authors characterised the murine homologue of CBE1 (Cbe1) and compared its temporal expression during murine and human lung development. Cbe1 cDNA was cloned and characterised using sequencing, standard PCR and Western blotting. Mouse and human embryonic/fetal lungs (HELs) were harvested for mRNA analysis and protein localisation in vivo and in vitro using RT-PCR and immunohistochemistry. The Cbe1 amino acid sequence was >75% identical with CBE1 and its alternative splicing and tissue distribution were highly conserved. Pulmonary expression of Cbe1 mRNA was increased at embryonic day (E)16, 1 day later than Foxj1, which is consistent with a role in ciliogenesis. In HELs, CBE1 mRNA was detectable at 8-9 weeks post-conception and increased in explant culture. CBE1 protein expression was weak at 10 weeks post-conception but strong at 12.3 weeks post-conception, in parallel with cilia formation. Additionally, Cbe1 mRNA was expressed at E11 (4-5 weeks post-conception in HELs) in the absence of Foxj1, implying a distinct role in early development. Chronological regulation of CBE1/Cbe1 expression during pulmonary differentiation suggests involvement in ciliogenesis, with an additional role during early lung development.

Non-aqueous formulations for ram and screen extrusion-spheronisation.

The use of non-aqueous cellulose-based formulations for extrusion-spheronisation (E-S) is investigated. A 10 wt% hydroxypropyl cellulose/isopropyl alcohol solution (HPC/IPA) was identified as a suitable sticky liquid binder for preparing non-aqueous pastes. Preliminary tests were performed on a series of pastes using a ram as well as a laboratory roller screen extruder, since the former is commonly used in batch testing and the latter replicates the shear range in a manufacturing screen extruder. Pellets with acceptable size and shape distributions were obtained with Avicel® HFE-102 NF/HPC/IPA for ram E-S, and with Avicel® RC-591/HPC/IPA for screen E-S. Further investigation was performed with calcium carbonate added as a model active pharmaceutical ingredient. Both formulations were able to generate pellets with acceptable size and shape characteristics at up to 50 wt% carbonate loading: further work is required to optimise yields.

What is rheology?

The topic of the 2017 Cambridge Ophthalmology Symposium was 'Go with the flow: rheology, fluid flow and the eye'. This paper is based on the opening presentation that was aimed to introduce key concepts within the topic of rheology to ophthalmologists and other scientists unfamiliar with the field. Examples are drawn from applications related to the eye.

Laws of physics help explain capillary non-perfusion in diabetic retinopathy.

The purpose is to use laws of physics to elucidate the mechanisms behind capillary non-perfusion in diabetic retinopathy. In diabetic retinopathy, loss of pericytes weakens capillary walls and the vessel dilates. A dilated capillary has reduced resistance to flow, therefore increased flow in that vessel and decreased in adjoining capillaries. A preferential shunt vessel is thus formed from the dilated capillary and the adjacent capillaries become non-perfused. We apply the laws of Laplace and Hagen-Poiseuille to better understand the phenomena that lead to capillary non-perfusion. These laws of physics can give a foundation for physical or mathematical models to further elucidate this field of study. The law of Laplace predicts that a weaker vessel wall will dilate, assuming constant transmural pressure. The Hagen-Poiseuille equation for flow and the Ostwald-de Waele relationship for viscosity predict that a dilated vessel will receive a higher portion of the fluid flow than the adjoining capillaries. Viscosity will decrease in the dilated vessel, furthering the imbalance and resulting in a patch of non-perfused capillaries next to the dilated 'preferential' shunt vessel. Physical principles support or inspire novel hypotheses to explain poorly understood phenomena in ophthalmology. This thesis of pericyte death and capillary remodelling, which was first proposed by Cogan and Kuwabara, already agrees with histological and angiographical observations in diabetic retinopathy. We have shown that it is also supported by classical laws of physics.

Botulinum toxin injections for adults with overactive bladder syndrome.

BACKGROUND: Overactive bladder syndrome is a common condition with a significant negative impact on quality of life. Intravesical injection of botulinum toxin is increasingly used as an intervention for refractory overactive bladder, with a considerable body of case reports and series in the literature suggesting beneficial effects. OBJECTIVES: The objective was to compare intravesical botulinum toxin injection with other treatments for neurogenic and idiopathic overactive bladder in adults. The hypotheses addressed were whether intravesical injection of botulinum toxin was better: than placebo or no treatment, pharmacological and other non-pharmacological interventions, whether higher doses of botulinum toxin were better than lower doses, whether botulinum toxin in combination with other treatments was better than other treatments alone, whether one formulation of botulinum toxin is better than another, and whether one injection technique was better than another. SEARCH STRATEGY: We searched the Cochrane Incontinence Group Specialised Trials Register (searched 22 November 2005). The register contains trials identified from MEDLINE, CINAHL, the Cochrane Central Register of Controlled Trials (CENTRAL), and handsearching of journals and conference proceedings. Additionally, all reference lists of selected trials were searched. No limitations were placed on the searches. SELECTION CRITERIA: All randomised or quasi-randomised controlled trials of treatment for overactive bladder syndrome in adults in which at least one management arm involved intravesical injection of botulinum toxin were included. Participants had either neurogenic or idiopathic overactive bladder with or without stress incontinence. Comparison interventions could include no intervention; placebo; lifestyle modification; bladder retraining; pharmacological treatments; surgery; bladder instillation techniques; neuromodulation; and different types, doses, and injection techniques of botulinum toxin. DATA COLLECTION AND ANALYSIS: Binary outcomes were presented as relative risk and continuous outcomes by mean differences. No data could be synthesised across studies due to differing designs and outcome measures. Data were tabulated where possible with results taken from trial reports where this was not possible. Where multiple publications were found, the reports were treated as a single source of data. MAIN RESULTS: Eight studies met the inclusion criteria. Results varied between studies. For the most part, studies reported superiority of botulinum toxin A to placebo in such outcomes as incontinence episodes, bladder capacity, maximum detrusor pressure, and quality of life. Low doses of botulinum toxin (100U to150U) appeared to have beneficial effects, but higher doses (300U) may have been more effective. Botulinum toxin appeared to have beneficial effects in overactive bladder that quantitatively exceeded the effects of intravesical resiniferatoxin. AUTHORS' CONCLUSIONS: Intravesical botulinum toxin shows promise as a therapy for overactive bladder symptoms, but as yet too little controlled trial data exist on benefits and safety compared with other interventions, or with placebo. Practitioners should be aware that at present there is little more than anecdotal evidence, in the form of case reports to support the efficacy of intravesical botulinum toxin; there is not much in the way of substantial, robust safety data. Furthermore, the optimal dose of botulinum toxin for efficacy and safety has not yet been demonstrated.

Effects of drying technique on extrusion-spheronisation granules and tablet properties.

Extrusion-spheronisation was used to generate smooth, highly spherical granules of a microcrystalline cellulose/propyl gallate/water paste. Freeze-drying retained the shape and size of the granules, whereas oven-drying produced roughened granules due to the uneven shrinkage of the wet powders. Compaction of one size fraction indicated that the granule strength differed noticeably, with the oven-dried samples producing tablets of lower voidage for a given applied compaction pressure. There was a reasonable correlation between tablet crushing strength and voidage. Major differences were observed in tablet dissolution, with the freeze-dried material exhibiting a two-regime behaviour and an initial dissolution rate constant an order of magnitude greater than the oven-dried form. Both the voidage and dissolution characteristics are postulated to be determined by the microstructure established during drying.

Critical review: Injectability of calcium phosphate pastes and cements.

Calcium phosphate cements (CPC) have seen clinical success in many dental and orthopaedic applications in recent years. The properties of CPC essential for clinical success are reviewed in this article, which includes properties of the set cement (e.g. bioresorbability, biocompatibility, porosity and mechanical properties) and unset cement (e.g. setting time, cohesion, flow properties and ease of delivery to the surgical site). Emphasis is on the delivery of calcium phosphate (CaP) pastes and CPC, in particular the occurrence of separation of the liquid and solid components of the pastes and cements during injection; and established methods to reduce this phase separation. In addition a review of phase separation mechanisms observed during the extrusion of other biphasic paste systems and the theoretical models used to describe these mechanisms are discussed. STATEMENT OF SIGNIFICANCE: Occurrence of phase separation of calcium phosphate pastes and cements during injection limits their full exploitation as a bone substitute in minimally invasive surgical applications. Due to lack of theoretical understanding of the phase separation mechanism(s), optimisation of an injectable CPC that satisfies clinical requirements has proven difficult. However, phase separation of pastes during delivery has been the focus across several research fields. Therefore in addition to a review of methods to reduce phase separation of CPC and the associated constraints, a review of phase separation mechanisms observed during extrusion of other pastes and the theoretical models used to describe these mechanisms is presented. It is anticipated this review will benefit future attempts to develop injectable calcium phosphate based systems.

Liquid phase migration in the extrusion and squeezing of microcrystalline cellulose pastes.

Extensive movement of the liquid phase relative to the solids in solid-liquid pastes during extrusion forming is an undesirable process phenomenon. The impact of formulation and flow pattern on liquid phase migration (LPM) during extrusion of model pharmaceutical pastes (40-50 wt% microcrystalline cellulose/water) has been investigated by ram extrusion through square-entry and 45 degrees conical-entry dies, and by lubricated squeeze flow (extensional flow). Threshold velocities for LPM were observed in both configurations. Squeeze flow testing showed that dilation during extension can cause LPM, while ram extrusion featured both dilation effects and drainage due to compaction. The threshold velocities observed in the two configurations agreed when presented as characteristic shear rates. The threshold velocity increased with paste solids content.

Chromosomal localization, genomic organization and evolution of the genes encoding human phosphatidylinositol transfer protein membrane-associated (PITPNM) 1, 2 and 3.

Eukaryotic proteins containing a phosphatidylinositol transfer (PITP) domain can be divided into two groups, one consisting of small soluble 35-kDa proteins and the other those that are membrane-associated and show sequence similarities to the Drosophila retinal degeneration B (rdgB) protein. The rdgB protein consists of four domains, an amino terminal PITP domain, a Ca2+-binding domain, a transmembrane domain and a carboxyl terminal domain that interacts with the protein tyrosine kinase PYK2. Three mammalian phosphatidylinositol transfer protein membrane-associated genes (PITPNM1, 2 and 3) with homology to Drosophila rdgB have previously been described and shown to be expressed in the mammalian retina. These findings and the demonstration that the rdgB gene plays a critical role in the invertebrate phototransduction pathway have led to the mammalian genes being considered as candidate genes for human eye diseases. In order to facilitate the analysis of these genes we have used radiation hybrid mapping and fluorescence in situ hybridization to localize the PITPNM2 and 3 genes to human chromosomes 12p24 and 17p13 respectively and hybrid mapping to confirm the localization of PITPNM1 to chromosome 11q13. We have also determined the genomic organization of both the soluble and membrane-associated Drosophila and human PITP domain-containing genes. Phylogenetic analysis indicates that the two groups arose by gene duplication that occurred very early in animal evolution.

A gene trap integration provides an early in situ marker for hepatic specification of the foregut endoderm.

We report the characterization of a gene trap integration that provides an in situ marker for one of the earliest events in liver development. Expression of the reporter gene is observed at the nine-somite stage in the hepatic field of the foregut endoderm. At 10.5 days post-coitus expression is observed exclusively and at high levels in the majority of cells in the developing liver bud. As development proceeds the proportion of expressing cells decreases with expression in adult liver being restricted to a few sporadic cells. This therefore provides the earliest, most specific in situ marker of the hepatic lineage reported to date and will be useful in the further characterization of the inductive events involved in hepatic specification. Molecular characterization of the gene trap insertion suggests that the expression pattern is the result of alternative promoter use in the ankyrin repeat-containing gene, gtar.

Novel SOX9 expression during human pancreas development correlates to abnormalities in Campomelic dysplasia.

Haploinsufficiency of SOX9, which encodes a homeodomain transcription factor, results in Campomelic dysplasia. Classical features of this disorder (e.g. skeletal dysplasia and 46,XY sex reversal) are in concordance with SOX9 expression profiles during human embryonic development. We report the robust expression of SOX9 throughout the pancreas during human embryogenesis, at levels of detection equivalent to the developing skeleton and testis. In the early foetal period, SOX9 expression declines and, in particular, is not apparent within the pancreatic islets. In keeping with this profile, examination of three cases with Campomelic dysplasia revealed abnormal pancreatic morphology. Epithelial cells were less densely packed within the mesenchymal stroma and islets less clearly formed with variable expression of hormone and beta cell markers. Taken together, these data indicate a novel potential role for SOX9 in pancreas development during human embryogenesis and early foetal life.

Expression of steroidogenic factor 1 and Wilms' tumour 1 during early human gonadal development and sex determination.

The transcription factors SF-1 and WT1 play pivotal roles in mammalian gonadal development and sexual differentiation. In human embryos, both SF-1 and WT1 are expressed when the indifferent gonadal ridge first forms at 32 days post-ovulation. As the sex cords develop - providing morphological evidence of testis differentiation - SF-1 localises predominantly to developing Sertoli cells in the sex cords, whereas WT1 retains a broader pattern of expression. Later, SF-1 localises predominantly to steroidogenic Leydig cells, and WT1 localises to the sex cords. In the ovary, SF-1 and WT1 transcripts persist in the gonadal ridge from the earliest developmental stages throughout the critical period of sex determination. These studies, which delineate for the first time the sequential expression profiles of SF-1 and WT1 during human gonadal development, provide a framework for understanding human sex reversal phenotypes associated with their mutations.

SRY, SOX9, and DAX1 expression patterns during human sex determination and gonadal development.

SRY, SOX9, and DAX1 are key genes in human sex determination, by virtue of their associated male-to-female sex reversal phenotypes when mutated (SRY, SOX9) or over-expressed (DAX1). During human sex determination, SRY is expressed in 46,XY gonads coincident with sex cord formation, but also persists as nuclear protein within Sertoli cells at 18 weeks gestation. High-level SOX9 expression in the sex cords of the testis parallels that seen during mouse development, however in humans, SOX9 transcripts also are detected in the developing ovary. Low-level DAX1 expression predates peak SRY expression by at least 10 days, and persists in Sertoli cells throughout the entire sex determination period. In Dosage Sensitive Sex reversal, the anti-testis properties of DAX1 over-expression could act prior to the peak effects of SRY and continue during the period of SOX9 expression. These findings highlight expression differences for the SRY, SOX9, and DAX1 genes during sex determination in humans and mice. These results provide a direct framework for future investigation into the mechanisms underlying normal and abnormal human sex determination.

Expression profiles of SF-1, DAX1, and CYP17 in the human fetal adrenal gland: potential interactions in gene regulation.

Cytochrome P450 17alpha-hydroxylase/17-20 lyase (P450(C17)) is a critical branchpoint enzyme for steroid hormone biosynthesis. During human gestation, P450(C17) is required for the production of dehydroepiandrostenedione sulfate by the fetal adrenal cortex and for testicular production of androgens that mediate male sexual differentiation. In this study, we investigate the regulation of the human CYP17 gene by two orphan nuclear receptors, steroidogenic factor 1 (SF-1) and DAX1. In human embryos, SF-1 and DAX1 are expressed throughout the developing adrenal cortex from its inception at 33 days post conception (dpc). In contrast, P450(C17) expression, which commences between 41 and 44 dpc, is limited to the fetal zone. The 5'-flanking region of the human CYP17 gene contains three functional SF-1 elements that collectively mediate a > or =25-fold induction of promoter activity by SF-1. In constructs containing all three functional SF-1 elements, DAX1 inhibited this activation by > or =55%. In the presence of only one or two SF-1 elements, DAX1 inhibition was lost even though SF-1 transactivation persisted. These data suggest that efficient repression of SF-1-mediated activation of the human CYP17 gene by DAX1 requires multiple SF-1 elements. Opposing effects of SF-1 and DAX1 may fine tune the differential responses of various SF-1 target genes in different endocrine tissues.