Validity and Reliability of the Insole3 Instrumented Shoe Insole for Ground Reaction Force Measurement during Walking and Running.

Pressure-detecting insoles such as the Insole3 have potential as a portable alternative for assessing vertical ground reaction force (vGRF) outside of specialized laboratories. This study evaluated whether the Insole3 is a valid and reliable alternative to force plates for measuring vGRF. Eleven healthy participants walked overground at slow and moderately paced speeds and ran at a moderate pace while collecting vGRF simultaneously from a force plate (3000 Hz) and Insole3 (100 Hz). Intraclass correlation coefficients (ICC) demonstrated excellent vGRF agreement between systems during both walking speeds for Peak 1, Peak 2, the valley between peaks, and the vGRF impulse (ICC > 0.941). There was excellent agreement during running for the single vGRF peak (ICC = 0.942) and impulse (ICC = 0.940). The insoles slightly underestimated vGRF peaks (−3.7% to 0.9% bias) and valleys (−2.2% to −1.8% bias), and slightly overestimated impulses (4.2% to 5.6% bias). Reliability between visits for all three activities was excellent (ICC > 0.970). The Insole3 is a valid and reliable alternative to traditional force plates for assessing vGRF during walking and running in healthy adults. The excellent ICC values during slow walking suggests that the Insole3 may be particularly suitable for older adults in clinical and home settings.

Level and Downhill Walking to Assess Implant Functionality in Bicruciate- and Posterior Cruciate-Retaining Total Knee Arthroplasty.

BACKGROUND: The goal of this study is to set up a functional motion analysis test to examine effects of the anterior cruciate ligament in total knee arthroplasty (TKA) patients by comparing knee kinematics, kinetics, and muscle activation patterns during level and downhill walking for patients with posterior cruciate-retaining (PCR) and bicruciate-retaining (BiCR) TKAs. METHODS: Motion and electromyography (EMG) data were collected for 12 subjects (4/8 male/female, 64 ± 11 years, 31.3 ± 7.3 body mass index, 6/6 right/left) with BiCR TKAs and 15 subjects (6/9 male/female, 67 ± 7 years, 30.5 ± 5.1 body mass index, 4/11 right/left) with PCR TKAs during level and downhill walking using the point cluster marker set and surface electrodes placed on the vastus medialis obliquus, rectus femoris, biceps femoris, and semitendinosus muscles. RESULTS: Level walking exhibited no significant differences in knee kinematics, kinetics, or EMG patterns. During downhill walking, BiCR subjects had significantly lower peak muscle activity in the vastus medialis obliquus and rectus femoris (P = .045 and .018, respectively), a trending higher peak knee flexion moment (2.0 ± 0.6% BW*HT vs 1.5 ± 0.6% BW*HT, P = .076), and significantly more knee flexion at heel strike (5.1° ± 4.7° vs 1.8° ± 2.8°, P = .044) compared with PCR subjects. CONCLUSION: Anterior cruciate ligament retention led to altered muscle recruitment during downhill walking in BiCR subjects compared with PCR subjects; thus, BiCR TKAs may offer some neuromuscular benefits for stabilizing the knee joint. In conclusion, level and downhill walking knee kinematics and kinetics combined with corresponding quadriceps and hamstrings EMG signals begin to build an overall picture of implant functionality.

Prediction of Polyethylene Wear Rates from Gait Biomechanics and Implant Positioning in Total Hip Replacement.

BACKGROUND: Patient-specific gait and surgical variables are known to play an important role in wear of total hip replacements (THR). However a rigorous model, capable of predicting wear rate based on a comprehensive set of subject-specific gait and component-positioning variables, has to our knowledge, not been reported. QUESTIONS/PURPOSE: (1) Are there any differences between patients with high, moderate, and low wear rate in terms of gait and/or positioning variables? (2) Can we design a model to predict the wear rate based on gait and positioning variables? (3) Which group of wear factors (gait or positioning) contributes more to the wear rate? PATIENTS AND METHODS: Data on patients undergoing primary unilateral THR who performed a postoperative gait test were screened for inclusion. We included patients with a 28-mm metal head and a hip cup made of noncrosslinked polyethylene (GUR 415 and 1050) from a single manufacturer (Zimmer, Inc). To calculate wear rates from radiographs, inclusion called for patients with a series of standing radiographs taken more than 1 year after surgery. Further, exclusion criteria were established to obtain reasonably reliable and homogeneous wear readings. Seventy-three (83% of included) patients met all criteria, and the final dataset consisted of 43 males and 30 females, 69 ± 10 years old, with a BMI of 27.3 ± 4.7 kg/m2. Wear rates of these patients were determined based on the relative displacement of the femoral head with regard to the cup using a validated computer-assisted X-ray wear-analysis suite. Three groups with low (< 0.1 mm/year), moderate (0.1 to 0.2 mm/year), and high (> 0.2 mm/year) wear were established. Wear prediction followed a two-step process: (1) linear discriminant analysis to estimate the level of wear (low, moderate, or high), and (2) multiple linear and nonlinear regression modeling to predict the exact wear rate from gait and implant-positioning variables for each level of wear. RESULTS: There were no group differences for positioning and gait suggesting that wear differences are caused by a combination of wear factors rather than single variables. The linear discriminant analysis model correctly predicted the level of wear in 80% of patients with low wear, 87% of subjects with moderate wear, and 73% of subjects with high wear based on a combination of gait and positioning variables. For every wear level, multiple linear and nonlinear regression showed strong associations between gait biomechanics, implant positioning, and wear rate, with the nonlinear model having a higher prediction accuracy. Flexion-extension ROM and hip moments in the sagittal and transverse planes explained 42% to 60% of wear rate while positioning factors, (such as cup medialization and cup inclination angle) explained only 10% to 33%. CONCLUSION: Patient-specific wear rates are associated with patients' gait patterns. Gait pattern has a greater influence on wear than component positioning for traditional metal-on-polyethylene bearings. CLINICAL RELEVANCE: The consideration of individual gait bears potential to further reduce implant wear in THR. In the future, a predictive wear model may identify individual, modifiable wear factors for modern materials.

Are Instrumented Knee Forces Representative of a Larger Population of Cruciate-Retaining Total Knee Arthroplasties?

BACKGROUND: It is not known if the loads and motions reported for instrumented knees are generalizable to a larger population of total knee arthroplasty (TKA) patients. The purpose of this study is to (1) report axial implant force data for chair and stair activities for a population of cruciate-retaining TKA patients and (2) compare the population forces to those measured with instrumented TKAs. METHODS: Twenty-three subjects with a cruciate-retaining TKA underwent motion analysis during stair ascending, stair descending, chair sitting, and chair rising activities after informed consent in this institutional review board approved study. Axial TKA forces were calculated using a previously validated computational model. Differences between the mean and variability of population instrumented TKA peak forces and force impulses were tested using t tests and Levene test. RESULTS: Peak axial forces were 3.06, 2.74, 2.65, and 2.60 kN for stair ascent, stair descent, chair rising, and chair sitting, respectively. Force impulses were 123.3, 123.4, 153.5, and 154.0 kN*% activity cycle for stair ascent, stair descent, chair sitting, and chair rising, respectively. Population TKA and instrumented TKA peak forces were different for stair ascent (P = .03) and stair descent (P = .03) in the second half of the activity cycles. The variability of the peak forces and impulses were not different (P = .106 to P = .99). CONCLUSION: The forces and motions presented in this study represent cruciate-retaining TKA patients and could be used for displacement-driven knee wear testing. The forces are similar to those in the literature from instrumented prostheses of an ultracongruent cruciate-sacrificing TKA.

The Feasibility of Using Augmented Auditory Feedback From a Pressure Detecting Insole to Reduce the Knee Adduction Moment: A Proof of Concept Study.

The objective of this work was to conduct a proof of concept study utilizing auditory feedback from a pressure-detecting shoe insole to shift plantar pressure medially in order to reduce the knee adduction moment (KAM). When compared with normal walking, 32 healthy subjects significantly reduced their peak KAM using feedback (p < 0.001). When compared with medial thrust gait, an established gait modification, walking with pressure-based feedback was equally effective at reducing the peak KAM, yet it successfully mitigated other potentially detrimental gait measures such as the peak knee flexion moment (KFM), knee internal rotation moment (KIrM), and a reduction in speed.

How Does Wear Rate Compare in Well-functioning Total Hip and Knee Replacements? A Postmortem Polyethylene Liner Study.

BACKGROUND: The longevity of total hip (THR) and knee replacements (TKR) that used historical bearing materials of gamma-in-air sterilized UHMWPE was affected more by osteolysis in THRs than in TKRs, although osteolysis remains a concern in TKRs. Therefore, the study of polyethylene wear is still of interest for the knee, particularly because few studies have investigated volumetric material loss in tibial knee inserts. For this study, a unique collection of autopsy-retrieved TKR and THR components that were well-functioning at the time of retrieval was used to compare volumetric wear differences between hip and knee polyethylene components made from identical material. QUESTIONS/PURPOSES: The following questions were addressed: (1) How much did the hip liners wear and what wear patterns did they exhibit? (2) How much did the knee inserts wear and what wear patterns did they exhibit? (3) What is the ratio between TKR and THR wear after controlling for implantation time and patient age? METHODS: We compared 23 THR components (Harris-Galante [HG] and HG II) and 20 TKR components (Miller-Galante [MG II]) that were retrieved postmortem. The components were made from the same polyethylene formulation and with similar manufacturing and sterilization (gamma-in-air) processes. Twenty-one patients (12 males, nine females) had THRs and 16 (four males, 12 females) had TKRs. Patients who had TKRs had an older (p = 0.001) average age than patients who had THRs (age, 75 years; SD, 10, versus 66 years; SD, 12, respectively). Only well-functioning components were included in this study. Therefore, implants retrieved postmortem from physically active patients and implanted for at least 2 years were considered. In addition, only normally wearing TKR components were considered, ie, those with fatigue wear (delamination) were excluded. The wear volume of each component was measured using metrology. For the tibial inserts an autonomous mathematic reconstruction method was used for quantification. RESULTS: The acetabular liners of the THR group had a wear rate of 38 mm(3) per year (95% CI, 29-47 mm(3)/year). Excluding patients with low-activity, the wear rate was 47 mm(3) per year (95% CI, 37-56 mm(3)/year). The wear rate of normally wearing tibial inserts was 17 mm(3) per year (95% CI, -6 to 40 mm(3)/year). After controlling for the relevant confounding variable of age, we found a TKR/THR wear rate ratio of 0.5 (95% CI, 0.29-0.77) at 70 years of age with a slightly increasing difference with increasing age. CONCLUSIONS: Excluding delamination, TKRs exhibited lower articular wear rates than THRs for historical polyethylene in these two unique cohorts of postmortem retrievals. CLINICAL RELEVANCE: The lower TKR wear rate is in line with the lower incidence of osteolysis in TKRs compared with THRs.

Hamstring Activity in the Anterior Cruciate Ligament Injured Patient: Injury Implications and Comparison With Quadriceps Activity.

PURPOSE: To investigate the potential causes of diminished knee extension after acute anterior cruciate ligament (ACL) injury using both surface electromyography (sEMG) analysis of the quadriceps and hamstrings, and gait analysis to assess muscle action and tone. METHODS: Consecutive patients with an acute ACL tear underwent sEMG and gait analysis within 2 weeks of injury, before ACL reconstruction. Standard motion analysis techniques were used and sEMG data were collected simultaneously with gait data. T-tests were used to determine differences between the ACL-deficient and control subjects in knee flexion angles, peak external knee joint moments, and total time that a muscle was activated ("on") during gait. External knee moments were expressed as a percentage of body weight times height. RESULTS: Ten patients (mean age 24 ± 4 years) were included at a mean 10.2 days between injury and analysis; 10 uninjured, matched control subjects were included for comparison. There were significant increases in minimum flexion angle at heel strike (5.92 ± 3.39 v -3.49 ± 4.55, P < .001) and midstance (14.1 ± 6.23 v 1.20 ± 4.21, P < .001) in the injured limb compared with controls. There were significantly lower maximum external extension moments at heel strike (-0.99 ± 0.46 v -2.94 ± 0.60, P < .001) and during the second half of stance in the injured limb compared with controls (-0.56 ± 1.14 v -3.54 ± 1.31, P < .001). The rectus femoris was "on" significantly less during gait in the injured leg compared with controls (49.1 ± 7.76% v 61.0 ± 14.8%, P = .044). There were no significant differences in hamstring activity "on" time during gait (P > .05). CONCLUSIONS: In patients with acute ACL injury, the ACL-deficient limb does not reach as much extension as controls. Although the rectus femoris is "on" for shorter periods during the gait cycle, there is no difference in hamstring time on during gait. This information may help clinicians better understand muscle function and gait patterns in the acute time period after ACL injury. LEVEL OF EVIDENCE: Level III, case control study.

The champagne toast position isolates the supraspinatus better than the Jobe test: an electromyographic study of shoulder physical examination tests.

BACKGROUND: While Jobe's test is widely used, it does not isolate supraspinatus activity. Our purpose was to examine the electromyographic (EMG) activity within the supraspinatus and deltoid with resisted abduction to determine the shoulder position that best isolates the activity of the supraspinatus. METHODS: We performed EMG analysis of the supraspinatus, anterior head of the deltoid, and middle head of the deltoid in 10 normal volunteers. We measured EMG activity during resisted shoulder abduction in the scapular plane to both manual resistance and a standardized load in varying degrees of abduction and rotation. To determine which position best isolates supraspinatus activity, the ratio of supraspinatus to deltoid activity (S:D) was calculated for each position. Results were analyzed with a repeated-measures analysis of variance with Bonferroni correction. The posterior deltoid was excluded as it serves mostly to extend and externally rotate. RESULTS: Our study confirmed Jobe's findings of maximal supraspinatus activity at 90° of abduction. However, decreasing abduction significantly increased S:D for both resisted manual testing and testing against a standardized load (P = .002 and .001, respectively). The greatest S:D ratio (4.6 ± 3.4 for standardized load testing) was seen at the "champagne toast" position, i.e., 30° of abduction, mild external rotation, 30° of flexion, and 90° of elbow flexion. The smallest ratio (0.8 ± 0.6) was seen at Jobe's position. CONCLUSIONS: Testing of abduction strength in the champagne toast position, i.e., 30° of abduction, mild external rotation, and 30° of flexion, better isolates the activity of the supraspinatus from the deltoid than Jobe's "empty can" position.

Comparison of Antagonist Muscle Activity During Walking Between Total Knee Replacement and Control Subjects Using Unnormalized Electromyography.

BACKGROUND: Although satisfactory outcomes have been reported after total knee replacement (TKR), full recovery of muscle strength and physical function is rare. We developed a relative activation index (RAI) to compare leg muscle activity from unnormalized surface electromyography (sEMG) between TKR and control subjects. METHODS: Nineteen TKR and 19 control subjects underwent gait analysis and sEMG. RAIs were calculated by dividing the average sEMG for 2 consecutive subphases of stance defined by the direction of the external sagittal plane moment (flexion or extension). RESULTS: RAIs and external moments indicate TKR subjects have less initial stance antagonist rectus femoris activity (P = .004), greater middle stance antagonist biceps femoris activity (P < .001), and less late stance agonist biceps femoris activity (P < .001) than control subjects. Individuals with TKR demonstrate increased flexor muscle activation during weight bearing, potentially contributing to altered gait patterns found during the stance phase of gait. CONCLUSION: The RAI helps detail whether decreased external moments correspond to less agonist or more antagonist muscle activity to determine true muscle activity differences between subject groups. Identifying the mechanisms underlying altered muscle function both before and after TKR is critical for developing rehabilitation strategies to address functional deficits and disability found in this patient population.

Predictors of throwing velocity in youth and adolescent pitchers.

BACKGROUND: Shoulder and elbow injuries are a common cause of pain, dysfunction, and inability to play in overhead throwers. Pitch velocity plays an integral part in the etiology of these injuries; however, the demographic and biomechanical correlates with throwing velocity remain poorly understood. We hypothesized that pitchers with higher velocity would have shared demographic and kinematic characteristics. METHODS: Normal preseason youth and adolescent pitchers underwent dual-orthogonal high-speed video analysis while pitch velocity was collected with a radar gun. Demographic and pitching history data were also collected. Kinematic data and observational mechanics were recorded. Multivariate regression analysis was performed. RESULTS: A total of 420 pitchers were included, with a mean pitching velocity of 64 ± 10 mph. After multivariate logistic regression analysis, the most important correlates with pitch velocity were age (P < .001; R(2) = 0.658), height (P < .001; R(2) = 0.076), separation of the hips and shoulders (P < .001; R(2) = 0.027), and stride length (P < .001; R(2) = 0.016); in combination, these 4 variables explained 78% of the variance in pitch velocity. Each year of age was associated with a mean 1.5 mph increase in velocity; each inch in height, with 1.2 mph; separation of the hips and shoulders, with 2.6 mph; and a 10% increase in stride length, with 1.9 mph. CONCLUSION: Pitch velocity is most strongly correlated with age, height, separation of the hips and shoulders, and stride length.

Improvement in knee loading after use of specialized footwear for knee osteoarthritis: results of a six-month pilot investigation.

OBJECTIVE: Biomechanical interventions for knee osteoarthritis (OA) aim to improve pain and retard disease progression by decreasing knee loading. This study was undertaken to evaluate the effects of 6 months of use of flat, flexible footwear (the mobility shoe) on knee loading in OA. METHODS: Subjects with knee OA underwent baseline gait analyses under conditions of walking in their own shoes, walking in mobility shoes, and walking barefoot. Thereafter, subjects wore the mobility shoes at least 6 hours per day for 6 days per week. Gait evaluations were repeated at 6, 12, and 24 weeks. An intent-to-treat analysis was performed to assess the longitudinal effects on knee loading with the shoe intervention. RESULTS: Compared to knee loading at baseline with the participants' own shoes, there was an 18% reduction in the knee adduction moment (KAM) by 24 weeks with the mobility shoes (P < 0.001) and no significant differences in the KAM by 24 weeks between mobility shoe and barefoot walking (P = 0.192). Over the 6 months of followup, participants also experienced an 11% reduction in the KAM when walking in their own shoes (P = 0.002) and a 10% reduction in the KAM when walking barefoot (P = 0.002 for the whole followup), as compared to these values at baseline under the same conditions. CONCLUSION: This study suggests that use of flat, flexible footwear results in significant reductions in knee loading in subjects with OA. By 24 weeks, there is evidence of a gait adaptation with sustained load reduction even when the mobility shoes are removed, suggesting that footwear may serve as a biomechanical training device to achieve beneficial alterations in gait mechanics for knee OA.

How have alternative bearings and modularity affected revision rates in total hip arthroplasty?

BACKGROUND: Total hip arthroplasty (THA) continues to be one of the most successful surgical procedures in the medical field. However, over the last two decades, the use of modularity and alternative bearings in THA has become routine. Given the known problems associated with hard-on-hard bearing couples, including taper failures with more modular stem designs, local and systemic effects from metal-on-metal bearings, and fractures with ceramic-on-ceramic bearings, it is not known whether in aggregate the survivorship of these implants is better or worse than the metal-on-polyethylene bearings that they sought to replace. QUESTIONS/PURPOSES: Have alternative bearings (metal-on-metal and ceramic-on-ceramic) and implant modularity decreased revision rates of primary THAs? METHODS: In this systematic review of MEDLINE and EMBASE, we used several Boolean search strings for each topic and surveyed national registry data from English-speaking countries. Clinical research (Level IV or higher) with ≥ 5 years of followup was included; retrieval studies and case reports were excluded. We included registry data at ≥ 7 years followup. A total of 32 studies (and five registry reports) on metal-on-metal, 19 studies (and five registry reports) on ceramic-on-ceramic, and 20 studies (and one registry report) on modular stem designs met inclusion criteria and were evaluated in detail. Insufficient data were available on metal-on-ceramic and ceramic-on-metal implants, and monoblock acetabular designs were evaluated in another recent systematic review so these were not evaluated here. RESULTS: There was no evidence in the literature that alternative bearings (either metal-on-metal or ceramic-on-ceramic) in THA have decreased revision rates. Registry data, however, showed that large head metal-on-metal implants have lower 7- to 10-year survivorship than do standard bearings. In THA, modular exchangeable femoral neck implants had a lower 10-year survival rate in both literature reviews and in registry data compared with combined registry primary THA implant survivorship. CONCLUSIONS: Despite improvements in implant technology, there is no evidence that alternative bearings or modularity have resulted in decreased THA revision rates after 5 years. In fact, both large head metal-on-metal THA and added modularity may well lower survivorship and should only be used in select cases in which the mission cannot be achieved without it. Based on this experience, followup and/or postmarket surveillance studies should have a duration of at least 5 years before introducing new alternative bearings or modularity on a widespread scale.

Electrochemical behavior of titanium in artificial saliva: influence of pH.

Titanium is the most common material chosen for dental implants because it is highly corrosion resistant because it constantly reforms a protective passive film layer. The formation and composition of the passive film layer is dependent on the environmental conditions. If the stable oxide layer is damaged, the titanium surface underneath can corrode. The purpose of this study was to determine if basic corrosion of commercially pure titanium (CpTi) alloy in artificial saliva was affected by pH and to understand the corrosion kinetics/mechanisms of CpTi as a function of pH. In this study, titanium alloy discs were subjected to corrosion tests. Before the tests, all samples were cleaned and polished using standard metallographic preparation methods. Artificial saliva was used as the testing medium. The following pH values were tested: 3.0, 4.5, 6.0, 6.5, 7.5, and 9.0. Different pH values were achieved by adding lactic acid (acidic) or NaOH (basic) in appropriate amounts. Potentiodynamic curves indicated behavior change at each pH. In addition, the corrosion current density value determined from the potentiodynamic curve exhibited the poorest corrosion resistance for pH 7.5. The Nyquist plot (from the electrochemical impedance spectroscopy results) indicated that pH 7.5 had the poorest resistance. Scanning electron microscopy images indicated that pH levels of 6.5, 7.5, and 9.0 had considerable surface corrosion. The results showed that the media's pH significantly influenced the corrosion behavior of CpTi. The poor corrosion behavior at the neutral pHs invites some concerns and highlights the need for further study.

Hip joint contact forces are lower in people with femoroacetabular impingement syndrome during squat tasks.

It remains unknown if hip joint forces during squat tasks are altered in people with femoroacetabular impingement syndrome (FAIS). The aim of this study is to compare hip joint forces between people with FAIS and healthy controls during double leg squat and single leg squat tasks and within limbs during a single leg squat task in people with FAIS. Kinematic and kinetic data were collected in eight people with FAIS and eight healthy matched controls using 3D motion capture and force plates. AnyBody Modeling System was used to perform musculoskeletal simulations to estimate hip joint angles, forces, and moments for all participants. Estimates were postprocessed with AnyPyTools and converted into normalized time series to be compared using a 1D statistical nonparametric mapping (SnPM) approach. SnPM with an independent samples t-test model was used to compare people with FAIS to controls, while a paired samples model was used to compare involved to uninvolved limb in people with FAIS. Patients demonstrated lower proximodistal force compared to controls (p < 0.01) and compared to the uninvolved side (p = 0.01) for single leg squat. The smaller joint contact forces in people with FAIS compared to controls could represent a strategy of reduced muscle forces to avoid pain and symptoms during this high demand task. These findings when combined with imaging data could help assess the severity of FAIS on hip related function during higher demand tasks.

Performance of Austenitic High-Nitrogen Steels under Gross Slip Fretting Corrosion in Bovine Serum.

Modular artificial hip joints are a clinical standard today. However, the release of wear products from the head-taper interface, which includes wear particles in the nm size range, as well as metal ions, have raised concerns. Depending on the loading of such taper joints, a wide variety of different mechanisms have been found by retrieval analyses. From these, this paper concentrates on analyzing the contribution of gross slip fretting corrosion at ultra-mild wear rates using a bovine calf serum solution (BCS) as the lubricant. The parameters were chosen based on biomechanical considerations, producing wear rates of some ng/m wear path. In parallel, the evolution of tribomaterial (third bodies) was analyzed as to its constituents and generation rates. It has already been shown earlier that, by an advantageous combination of wear mechanisms and submechanisms, certain constituents of the tribomaterial remain inside the contact area and act like extreme-pressure lubricant additives. For the known wear and corrosion resistance of austenitic high-nitrogen steels (AHNSs), which outperform CoCrMo alloys even under inflammatory conditions, we hypothesized that such steels will generate ultra-mild wear rates under gross slip fretting. While testing AHNSs against commercially available biomedical-grade materials of CoCrMo and TiAlV alloys, as well as zirconia-toughened alumina (ZTA) and against itself, it was found that AHNSs in combination with a Ti6Al4V alloy generated the smallest wear rate under gross slip fretting corrosion. This paper then discusses the wear behavior on the basis of ex situ analyses of the worn surfaces as to the acting wear mechanisms and submechanisms, as well as to the tribological reaction products.

Association between Dexmedetomidine Use and Mortality in Patients with COVID-19 Receiving Invasive Mechanical Ventilation: A U.S. National COVID Cohort Collaborative (N3C) Study.

(1) Background/Objectives: Dexmedetomidine is a sedative for patients receiving invasive mechanical ventilation (IMV) that previous single-site studies have found to be associated with improved survival in patients with COVID-19. The reported clinical benefits include dampened inflammatory response, reduced respiratory depression, reduced agitation and delirium, improved preservation of responsiveness and arousability, and improved hypoxic pulmonary vasoconstriction and ventilation-perfusion ratio. Whether improved mortality is evident in large, multi-site COVID-19 data is understudied. (2) Methods: The association between dexmedetomidine use and mortality in patients with COVID-19 receiving IMV was assessed. This retrospective multi-center cohort study utilized patient data in the United States from health systems participating in the National COVID Cohort Collaborative (N3C) from 1 January 2020 to 3 November 2022. The primary outcome was 28-day mortality rate from the initiation of IMV. Propensity score matching adjusted for differences between the group with and without dexmedetomidine use. Adjusted hazard ratios (aHRs) for 28-day mortality were calculated using multivariable Cox proportional hazards models with dexmedetomidine use as a time-varying covariate. (3) Results: Among the 16,357,749 patients screened, 3806 patients across 17 health systems met the study criteria. Mortality was lower with dexmedetomidine use (aHR, 0.81; 95% CI, 0.73-0.90; p < 0.001). On subgroup analysis, mortality was lower with earlier dexmedetomidine use-initiated within the median of 3.5 days from the start of IMV-(aHR, 0.67; 95% CI, 0.60-0.76; p < 0.001) as well as use prior to standard, widespread use of dexamethasone for patients on respiratory support (prior to 30 July 2020) (aHR, 0.54; 95% CI, 0.42-0.69; p < 0.001). In a secondary model that was restricted to 576 patients across six health system sites with available PaO2/FiO2 data, mortality was not lower with dexmedetomidine use (aHR 0.95, 95% CI, 0.72-1.25; p = 0.73); however, on subgroup analysis, mortality was lower with dexmedetomidine use initiated earlier than the median dexmedetomidine start time after IMV (aHR, 0.72; 95% CI, 0.53-0.98; p = 0.04) and use prior to 30 July 2020 (aHR, 0.22; 95% CI, 0.06-0.78; p = 0.02). (4) Conclusions: Dexmedetomidine use was associated with reduced mortality in patients with COVID-19 receiving IMV, particularly when initiated earlier, rather than later, during the course of IMV as well as use prior to the standard, widespread usage of dexamethasone during respiratory support. These particular findings might suggest that the associated mortality benefit with dexmedetomidine use is tied to immunomodulation. However, further research including a large randomized controlled trial is warranted to evaluate the potential mortality benefit of DEX use in COVID-19 and evaluate the physiologic changes influenced by DEX that may enhance survival.

Effect of tribolayer formation on corrosion of CoCrMo alloys investigated using scanning electrochemical microscopy.

Scanning electrochemical microscopy was used to probe the topography and electrochemical activity of CoCrMo alloys mechanically polished in the presence of bovine calf serum (BCS) in a hip simulator. These substrates are made of the same alloy used in metal-on-metal bearings for artificial hip joints. The BCS serves as an in vitro substitute for the synovial fluid which forms a lubricant in the actual orthopedic device. Chemical and mechanical processes result in the formation of a tribolayer which passivates the alloy surface. Our studies of the heterogeneous electron transfer between ferrocenemethanol and the alloy indicate that the tribolayer formed on both high- and low-carbon substrates is highly heterogeneous with regions of high electrochemical activity. Whereas pits in the samples polished in the absence of BCS show the regions of highest electrochemical activity, the tribolayer-coated samples have electrochemical hot spots in topographically smooth regions of the surface. The tribolayer provides some attenuation of the electrochemical activity of the alloy but does not prevent the possibility of corrosion from occurring.

The relationship of vibratory perception to dynamic joint loading, radiographic severity, and pain in knee osteoarthritis.

OBJECTIVE: Patients with knee osteoarthritis (OA) have been shown to have somatosensory deficits of the lower extremity. This study was designed to assess the association of these deficits with dynamic joint loading and their relationship to the structural and symptomatic severity of knee OA. METHODS: Subjects with symptomatic knee OA underwent evaluation of the vibratory perception threshold (VPT) using a biothesiometer at 5 sites at the lower extremity. Dynamic joint loading was assessed through gait analyses. Knee pain was evaluated using a visual analog scale score for pain based on the Western Ontario and McMaster Universities OA Index. Radiographic severity of knee OA was assessed using the Kellgren/Lawrence (K/L) grading scale on radiographs obtained with the knee in a standing position. RESULTS: Dynamic knee joint loading was directly associated with the VPT at the metatarsophalangeal (MTP) joint (Spearman's rho=0.384, P=0.033), indicating that the worse the vibratory sense, the higher the knee load during gait. The K/L severity grade was directly associated with the VPT at the MTP joint and lateral femoral condyle, after adjustment for age, sex, body mass index, and knee pain. After adjustment for confounders, there were no significant associations observed between the VPT and pain at any of the sites tested. CONCLUSION: These findings demonstrate an association between greater somatosensory deficits and higher dynamic loads in OA. They also demonstrate structural consequences associated with somatosensory deficits in OA, since the extent of sensory loss directly correlated with the radiographic severity of knee OA. However, there was no relationship observed between vibratory sense and symptomatic knee OA pain.

Fine tuning total knee replacement contact force prediction algorithms using blinded model validation.

The purpose of this study was to perform a blinded comparison of model predictions of total knee replacement contact forces to in vivo forces from an instrumented prosthesis during normal walking and medial thrust gait by participating in the "Third Grand Challenge Competition to Predict in vivo Knee Loads." We also evaluated model assumptions that were critical for accurate force predictions. Medial, lateral, and total axial forces through the knee were calculated using a previously developed and validated parametric numerical model. The model uses equilibrium equations between internal and external moments and forces to obtain knee joint contact forces and calculates a range of forces at instances during the gait cycle through parametric variation of muscle activity levels. For 100 instances during a normal over-ground gait cycle, model root mean square differences from eTibia data were 292, 248, and 281 for medial, lateral, and total contact forces, respectively. For 100 instances during a medial thrust gait cycle, model root mean square differences from eTibia data were 332, 234, and 470 for medial, lateral, and total contact forces, respectively. The percent difference between measured and predicted peak total axial force was 2.89% at the first peak and 9.36% at the second peak contact force for normal walking and 3.94% at the first peak and 14.86% at the second peak contact force for medial thrust gait. After unblinding, changes to model assumptions improved medial and lateral force predictions for both gait styles but did not improve total force predictions. Axial forces computed with the model compared well to the eTibia data under blinded and unblinded conditions. Knowledge of detailed knee kinematics, namely anterior-posterior translation, appears to be critical in obtaining accurate force predictions.

Influence of corrosion on lipopolysaccharide affinity for two different titanium materials.

STATEMENT OF PROBLEM: Titanium is subject to corrosion in the oral cavity, which could contribute to periimplantitis. However, the effect of corrosion on the lipopolysaccharide affinity for titanium remains unknown. PURPOSE: This study evaluated the role of corrosion (in artificial saliva at pHs 3, 6.5, and 9) on the lipopolysaccharide (LPS) affinity for commercially pure titanium (cp-Ti) and Ti-6Al-4V alloy. MATERIAL AND METHODS: Seventy-two titanium disks were anodically polarized in a controlled environment (n=9). Control specimens were not corroded. Deionized water with different concentrations of LPS (1.5, 15, and 150 µg/mL) were used to treat the disks for 24 hours to investigate LPS adherence (n=3). Then specimens were immersed in LPS-free water to evaluate LPS elution at 24, 48, and 72 hours. Data were analyzed by the 2-way, 3-way, and 3-way repeated measures ANOVA, t tests, and the Tukey honestly significant difference (HSD) tests (α=.05). RESULTS: A greater corrosion rate of cp-Ti and Ti-6Al-4V alloy and a higher LPS adherence to titanium surfaces (P<.05) were noted at acidic pH. The LPS affinity was higher for the Ti-6Al-4V alloy than for cp-Ti (P<.05). More LPS was eluted from titanium surfaces after a 24-hour interval. CONCLUSION: Lipopolysaccharide affinity for cp-Ti and Ti-6Al-4V alloy is influenced by the corrosion process.