Molecular Probing of the Microscopic Pressure at Contact Interfaces.

Obtaining insights into friction at the nanoscopic level and being able to translate these into macroscopic friction behavior in real-world systems is of paramount importance in many contexts, ranging from transportation to high-precision technology and seismology. Since friction is controlled by the local pressure at the contact it is important to be able to detect both the real contact area and the nanoscopic local pressure distribution simultaneously. In this paper, we present a method that uses planarizable molecular probes in combination with fluorescence microscopy to achieve this goal. These probes, inherently twisted in their ground states, undergo planarization under the influence of pressure, leading to bathochromic and hyperchromic shifts of their UV-vis absorption band. This allows us to map the local pressure in mechanical contact from fluorescence by exciting the emission in the long-wavelength region of the absorption band. We demonstrate a linear relationship between fluorescence intensity and (simulated) pressure at the submicron scale. This relationship enables us to experimentally depict the pressure distribution in multiasperity contacts. The method presented here offers a new way of bridging friction studies of the nanoscale model systems and practical situations for which surface roughness plays a crucial role.

Highly Luminescent Earth-Benign Organometallic Manganese Halide Crystals with Ultrahigh Thermal Stability of Emission from 4 to 623 K.

The phosphor-converted light-emitting diode (PC-LED) has become an indispensable solid-state lighting and display technologies in the modern society. Nevertheless, the use of scarce rare-earth elements and the thermal quenching (TQ) behavior are still two most crucial issues yet to be solved. Here, this work successfully demonstrates a highly efficient and thermally stable green emissive MnI2 (XanPO) crystals showing a notable photoluminescence quantum yield (PLQY) of 94% and a super TQ resistance from 4 to 623 K. This unprecedented superior thermal stability is attributed to the low electron-phonon coupling and the unique rigid crystal structure of MnI2 (XanPO) over the whole temperature range based on the temperature-dependent photoluminescence (PL) and single crystal X-ray diffraction (SCXRD) analyses. Considering these appealing properties, green PC-LEDs with a power efficacy of 102.5 lm W-1 , an external quantum efficiency (EQE) of 22.7% and a peak luminance up to 7750 000 cd m-2 are fabricated by integrating MnI2 (XanPO) with commercial blue LEDs. Moreover, the applicability of MnI2 (XanPO) in both micro-LEDs and organic light-emitting diodes (OLEDs) is also demonstrated. In a nutshell, this study uncovers a candidate of highly luminescent and TQ resistant manganese halide suitable for a variety of emission applications.

Exciplex-Forming Cohost Systems with 2,3-Dicyanopyrazinophenanthrene-based Acceptors to Achieve Efficient Near Infrared OLEDs.

Two new 2,3-dicyanopyrazinophenanthrene-based acceptors (A) p-QCN and m-QCN were synthesized to blend with a donor (D) CPTBF for the exciplex formation. The energy levels of p-QCN and m-QCN are modulated by the peripheral substituents 4- and 3-benzonitrile, respectively. Exciplex-forming blends were identified by the observation of the red-shifted emissions from various D : A blends with higher ratios of donor for suppressing the aggregation of acceptor. The two-component relaxation processes observed by time-resolved photoluminescence support the thermally activated delayed fluorescence (TADF) character of the exciplex-forming blends. The device employing CPTBF : p-QCN and (2 : 1) and CPTBF : m-QCN (2 : 1) blend as the emitting layer (EML) gave EQEmax of 1.76 % and 5.12 %, and electroluminescence (EL) λmax of 629 nm and 618 nm, respectively. The device efficiency can be further improved to 4.32 % and 5.57 % with CPTBF : p-QCN and (4 : 1) and CPTBF : m-QCN (4 : 1) as the EML, which is consistent with their improved photoluminescence quantum yields (PLQYs). A new fluorescent emitter BPBBT with photoluminescence (PL) λmax of 726 nm and a high PLQY of 67 % was synthesized and utilized as the dopant of CPTBF : m-QCN (4 : 1) cohost system. The device employing CPTBF : m-QCN (4 : 1): 5 wt.% BPBBT as the EML gave an EQEmax of 5.02 % and EL λmax centered at 735 nm, however, the weak residual exciplex emission remains. By reducing the donor ratio, the exciplex emission can be completely transferred to BPBBT and the corresponding device with CPTBF : m-QCN (2 : 1): 5 wt.% BPBBT as the EML can achieve EL λmax of 743 nm and EQEmax of 4.79 %. This work manifests the high efficiency near infrared (NIR) OLED can be realized by triplet excitons harvesting of exciplex-forming cohost system, followed by the effective energy transfer to an NIR fluorescent dopant.

Chiral Binaphthalene Building Blocks for Self-Assembled Nanoscale CPL Emitters.

The introduction of biuret hydrogen-bonding sites onto chiral binaphthalene-based chromophores was investigated as a route to sub-micron-sized, vesicle-like aggregates endowed with chiroptical properties. The synthesis was conducted from the corresponding chiral 4,4'-dibromo-1,1'-bis(2-naphthol) via Suzuki-Miyaura coupling to afford luminescent chromophores whose emission spectrum could be tuned from blue to yellow-green through extension of the conjugation. For all compounds, the spontaneous formation of hollow spheres with a diameter of ca. 200-800 nm was evidenced by scanning electron microscopy, along with strong asymmetry in the circularly polarized absorption spectra. For some compounds, the emission also displayed circular polarization with values of glum = ca. 10-3 which could be increased upon aggregation.

A universal strategy for the fabrication of single-photon and multiphoton NIR nanoparticles by loading organic dyes into water-soluble polymer nanosponges.

The development of optical organic nanoparticles (NPs) is desirable and widely studied. However, most organic dyes are water-insoluble such that the derivatization and modification of these dyes are difficult. Herein, we demonstrated a simple platform for the fabrication of organic NPs designed with emissive properties by loading ten different organic dyes (molar masses of 479.1-1081.7 g/mol) into water-soluble polymer nanosponges composed of poly(styrene-alt-maleic acid) (PSMA). The result showed a substantial improvement over the loading of commercial dyes (3.7-50% loading) while preventing their spontaneous aggregation in aqueous solutions. This packaging strategy includes our newly synthesized organic dyes (> 85% loading) designed for OPVs (242), DSSCs (YI-1, YI-3, YI-8), and OLEDs (ADF-1-3, and DTDPTID) applications. These low-cytotoxicity organic NPs exhibited tunable fluorescence from visible to near-infrared (NIR) emission for cellular imaging and biological tracking in vivo. Moreover, PSMA NPs loaded with designed NIR-dyes were fabricated, and photodynamic therapy with these dye-loaded PSMA NPs for the photolysis of cancer cells was achieved when coupled with 808 nm laser excitation. Indeed, our work demonstrates a facile approach for increasing the biocompatibility and stability of organic dyes by loading them into water-soluble polymer-based carriers, providing a new perspective of organic optoelectronic materials in biomedical theranostic applications.

Synergistic Dual-Atom Molecular Catalyst Derived from Low-Temperature Pyrolyzed Heterobimetallic Macrocycle-N4 Corrole Complex for Oxygen Reduction.

A heterobimetallic corrole complex, comprising oxygen reduction reaction (ORR) active non-precious metals Co and Fe with a corrole-N4 center (PhFCC), is successfully synthesized and used to prepare a dual-atom molecular catalyst (DAMC) through subsequent low-temperature pyrolysis. This low-temperature pyrolyzed electrocatalyst exhibited impressive ORR performance, with onset potentials of 0.86 and 0.94 V, and half-wave potentials of 0.75 and 0.85 V, under acidic and basic conditions, respectively. During potential cycling, this DAMC displayed half-wave potential losses of only 25 and 5 mV under acidic and alkaline conditions after 3000 cycles, respectively, demonstrating its excellent stability. Single-cell Nafion-based proton exchange membrane fuel cell performance using this DAMC as the cathode catalyst showed a maximum power density of 225 mW cm-2 , almost close to that of most metal-N4 macrocycle-based catalysts. The present study showed that preservation of the defined CoN4 structure along with the cocatalytic Fe-Cx site synergistically acted as a dual ORR active center to boost overall ORR performance. The development of DAMC from a heterobimetallic CoN4-macrocyclic system using low-temperature pyrolysis is also advantageous for practical applications.

Vacuum-Deposited Biternary Organic Photovoltaics.

Ternary blend organic photovoltaics (OPVs) have been introduced to improve solar spectral absorption and reduce energy losses beyond that of binary blend OPVs, but the difficulties in simultaneously optimizing the morphology of three molecular components result in devices that have generally exhibited performance inferior to that of analogous binary OPVs. Here, we introduce a small molecule-based biternary OPV comprising two individual, vacuum-deposited binary bulk heterojunctions fused at a planar junction without component intermixing. In contrast to previous reports where the open circuit voltage (VOC) of a conventional, blended ternary cell lies between those of the individual binaries, the VOC of the biternary OPV corresponds to one of the constituent binaries, depending on the order in which they are stacked relative to the anode. Additionally, dipole-induced energy-level realignment between the two binary segments necessary to achieve maximum efficiency is observed only when using donor-acceptor-acceptor' dipolar donors in the photoactive heterojunctions. The optimized biternary OPV shows improved performance as compared to its two constituent binary OPVs, achieving a power conversion efficiency of 10.6 ± 0.3% under AM 1.5G 1 sun (100 mW/cm2) simulated illumination with VOC = 0.94 ± 0.01 V, a short circuit current density of 16.0 ± 0.5 mA cm-2, and a fill factor of 0.70 ± 0.01.

Development of Materials for Blue Organic Light Emitting Devices.

The success of organic light emitting diodes (OLED) has been witnessed by the commercialization of this technology for manufacturing the vivid and colorful displays used in our daily life now. The prospective growth of OLED technology on display industry will be optimistic. Over the last three decades, many different approaches on material and device designs have been implemented for improving the efficiency and stability of OLED devices. These efforts install main cornerstones to support the great achievement of OLED technology. However, until now, the performance and stability of blue OLEDs still have some concerns. This troublesome issue should be totally conquered before the large-scale manufactures dominated over other display technologies, particularly liquid crystal-based displays, takes place. Though significant progress has already been made to achieve high performance and long lifetime blue OLEDs, this topic still remains as one of the hot researches in OLEDs. We have been working on this area for about two decades and made some notable contributions. Consequently, in this personal account we have outlined our efforts to obtain better performing blue OLEDs by utilizing a range of emitters based on fluorescence, phosphorescence, delayed fluorescence and exciplex systems. We have also developed some novel host materials for blue OLEDs, which are worth mentioning in this account.

The Twisted Benzo[ghi]-Perylenetriimide Dimer as a 3D Electron Acceptor for Fullerene-Free Organic Photovoltaics.

A series of twisted N,N-linked benzo[ghi]-perylenetriimide dimers (t-BPTI) with various lengths of the α-branched alkyl side chain at the six-membered imide ring position was designed, synthesized, and characterized. These compounds showed the low-lying LUMO energy level of -3.78 eV, which was similar to that of PC61 BM (-3.71 eV), but with intensive optical absorption in the range 350-500 nm. The twisted molecular geometry with two nearly perpendicular BPTI planes achieved a favorable nanoscale phase separation by relieving the self-aggregation of rigid BPTI units in blend films. The acceptor t-BPTI-3 unit with the longest alkyl side chains has been demonstrated to be an efficient electron acceptor in solution-processed bulk heterojunction organic photovoltaics (OPV), giving a power conversion efficiency of 3.68 % when using conjugated polymer PTB7-Th as the donor and without additional treatments.

Non-doped solid-state white light-emitting electrochemical cells employing the microcavity effect.

Solid-state white light-emitting electrochemical cells (LECs) have attracted research attention owing to their advantages of simple device structure, low operation voltage and compatibility with solution processes. In this work, we demonstrate a simple approach to obtain white electroluminescence (EL) from non-doped LECs based on a blue-emitting complex. With a relatively thicker emissive layer, red emission can be additionally enhanced by the microcavity effect when the recombination zone moves to appropriate positions. Hence, white EL can be harvested by combining blue emission from the complex and red emission from the microcavity effect. These non-doped white LECs show external quantum efficiencies and power efficiencies up to 5% and 12 lm W(-1), respectively. These results show that efficient white EL can be obtained in simple non-doped LECs.

Regioisomeric effects on the electronic features of indenothiophene-bridged D-π-A'-A DSSC sensitizers.

Two D-π-A'-A regioisomers (A-IDT-D and D-IDT-A) featuring 4,4'-di-p-tolyl-4 H-indeno[1,2-b]-thiophene as a π linker (π) between the diarylamino donor (D) and the pyrimidine-cyanoacrylic acid acceptor (A'-A) have been successfully synthesized and characterized as efficient sensitizers for the dye-sensitized solar cells (DSSCs). The different arrangements of the D and A'-A blocks on the unsymmetrical indenothiophene (IDT) core render the dipole of IDT being along (A-IDT-D) or opposite (D-IDT-A) to the direction of intramolecular (donor-to-acceptor) charge transfer, and thus induce variations in the physical properties. The experimental observations correlated well with the theoretical analyses, clearly revealing the trade-off between the molar extinction coefficient (ε) and the S0 →S1 transition energy. As a result, a superior ε value was observed for D-IDT-A, whereas a bathochromic shift in the absorption occurred in A-IDT-D. The larger ε value of D-IDT-A together with its more favorable energy level relative to TiO2 led to a higher power conversion efficiency of 7.41 % for the D-IDT-A-based DSSC, retaining approximately 95 % of the N719-based DSSC efficiency. This work manifests the clear structure-property relationship for the case of donor and acceptor components being connected by an unsymmetrical π linker and provides insights for molecular engineering of organic sensitizers.

Exciplex-forming cohost systems with 2,7-dicyanofluorene acceptors for high efficiency red and deep-red OLEDs.

Two 2,7-dicyaonfluorene-based molecules 27-DCN and 27-tDCN are utilized as acceptors (A) to combine with hexaphenylbenzene-centered donors (D) TATT and DDT-HPB for probing the exciplex formation. The photophysical characteristics reveal that the steric hindered 27-tDCN not only can increase the distance of D and A, resulting in a hypsochromic emission, but also dilute the concentration of triplet excitons to suppress non-radiative process. The 27-tDCN-based exciplex-forming blends exhibit better photoluminescence quantum yield (PLQY) as compared to those of 27-DCN-based pairs. In consequence, among these D:A blends, the device employing DDT-HPB:27-tDCN blend as the emissiom layer (EML) exhibits the best EQE of 3.0% with electroluminescence (EL) λmax of 542 nm. To further utilize the exciton electrically generated in exciplex-forming system, two D-A-D-configurated fluorescence emitter DTPNT and DTPNBT are doped into the DDT-HPB:27-tDCN blend. The nice spectral overlap ensures fast and efficient Förster energy transfer (FRET) process between the exciplex-forming host and the fluorescent quests. The red device adopting DDT-HPB:27-tDCN:10 wt% DTPNT as the EML gives EL λmax of 660 nm and maximum external quantum efficiency (EQEmax) of 5.8%, while EL λmax of 685 nm and EQE of 5.0% for the EML of DDT-HPB:27-tDCN:10 wt% DTPNBT. This work manifests a potential strategy to achieve high efficiency red and deep red OLED devices by incorporating the highly fluorescent emitters to extract the excitons generated by the exciplex-forming blend with bulky acceptor for suppressing non-radiative process.

Entropy-driven charge-transfer complexation yields thermally activated delayed fluorescence and highly efficient OLEDs.

Exciplex-forming systems that display thermally activated delayed fluorescence are widely used for fabricating organic light-emitting diodes. However, their further development can be hindered through a lack of structural and thermodynamic characterization. Here we report the generation of inclusion complexes between a cage-like, macrocyclic, electron-accepting host (A) and various N-methyl-indolocarbazole-based electron-donating guests (D), which exhibit exciplex-like thermally activated delayed fluorescence via a through-space electron-transfer process. The D/A cocrystals are fully resolved by X-ray analyses, and UV-visible titration data show their formation to be an endothermic and entropy-driven process. Moreover, their emission can be fine-tuned through the molecular orbitals of the donor. Organic light-emitting diodes were fabricated using one of the D/A systems, and the maximum external quantum efficiency measured was 15.2%. An external quantum efficiency of 10.3% was maintained under a luminance of 1,000 cd m-2. The results show the potential of adopting inclusion complexation to better understand the relationships between the structure, formation thermodynamics and properties of exciplexes.

Charge carrier dynamics of vapor-deposited small-molecule/fullerene organic solar cells.

Although small-molecule organic solar cells (SMOSCs) have shown increasingly promising prospects as a source of solar power, there have been few studies concerning the photophysics of these systems. Here, we report the time scale and efficiency of charge separation and recombination in a vapor-deposited SMOSC material that produces 5.81% power conversion efficiency. Transient absorption and time-resolved photoluminescence (trPL) studies of thin film blends comprising DTDCTB, a narrow-band gap electron donor, and either C60 or C70 as an electron acceptor show that charge separation occurs in ~100 fs, while charge recombination takes place over sub-ns and ns time scales. trPL indicates a donor electron-hole pair lifetime of ~33 ps in the neat film and reveals that ~20% of donors fail to charge separate in donor-acceptor mixed films, likely owing to some spatially extended donor-rich regions that interact poorly with acceptors. Our results suggest that morphological manipulations of this material could further improve device efficiency.

Molecular topology tuning of bipolar host materials composed of fluorene-bridged benzimidazole and carbazole for highly efficient electrophosphorescence.

Two new molecules, CzFCBI and CzFNBI, have been tailor-made to serve as bipolar host materials to realize high-efficiency electrophosphorescent devices. The molecular design is configured with carbazole as the hole-transporting block and N-phenylbenzimidazole as the electron-transporting block hybridized through the saturated bridge center (C9) and meta-conjugation site (C3) of fluorene, respectively. With structural topology tuning of the connecting manner between N-phenylbenzimidazole and the fluorene core, the resulting physical properties can be subtly modulated. Bipolar host CzFCBI with a C connectivity between phenylbenzimidazole and the fluorene bridge exhibited extended π conjugation; therefore, a low triplet energy of 2.52 eV was observed, which is insufficient to confine blue phosphorescence. However, the monochromatic devices indicate that the matched energy-level alignment allows CzFCBI to outperform its N-connected counterpart CzFNBI while employing other long-wavelength-emitting phosphorescent guests. In contrast, the high triplet energy (2.72 eV) of CzFNBI imparted by the N connectivity ensures its utilization as a universal bipolar host for blue-to-red phosphors. With a common device configuration, CzFNBI has been utilized to achieve highly efficient and low-roll-off devices with external quantum efficiency as high as 14 % blue, 17.8 % green, 16.6 % yellowish-green, 19.5 % yellow, and 18.6 % red. In addition, by combining yellowish-green with a sky-blue emitter and a red emitter, a CzFNBI-hosted single-emitting-layer all-phosphor three-color-based white electrophosphorescent device was successfully achieved with high efficiencies (18.4 %, 36.3 cd A(-1) , 28.3 lm W(-1) ) and highly stable chromaticity (CIE x=0.43-0.46 and CIE y=0.43) at an applied voltage of 8 to 12 V, and a high color-rendering index of 91.6.

Enhanced electroluminescence based on thermally activated delayed fluorescence from a carbazole-triazine derivative.

Thermally activated delayed fluorescence (TADF) properties of a dicarbazole-triazine compound, 9-(4,6-diphenyl-1,3,5-triazin-2-yl)-9'-phenyl-3,3'-bicarbazole (CzT), and its OLED characteristics were investigated. An estimated small energy gap of about 90 meV between the singlet and triplet energy states of CzT made the up-conversion of triplet excitons back to a singlet state possible. The origin of the observed delayed fluorescence has been shown to be thermally activated delayed fluorescence. An organic light emitting diode (OLED) with CzT as an emitter showed the maximum external quantum efficiency (EQE) of 6%. For comparison, another carbazole-triazine derivative of 3-(2'-(4,6-diphenyl-1,3,5-triazin-2-yl)-[1,1'-biphenyl]-2-yl)-9-phenyl-9H-carbazole (PhCzTAZ) with a similar structure was also studied. PhCzTAZ showed a low fluorescence quantum yield with no TADF.

Tuning Electrochemical Stability of 5,10-Ditolylphenazine-Based Antiaromatic Materials for Unipolar Memristor toward Artificial Synapses Application.

Three organic conjugated small molecules, DTA-DTPZ, Cz-DTPZ, and DTA-me-DTPZ comprising an antiaromatic 5,10-ditolylphenazine (DTPZ) core and electron-donating peripheral substituents with high HOMOs (-4.2 to -4.7 eV) and multiple reversible oxidative potentials are reported. The corresponding films sandwiched between two electrodes show unipolar and switchable hysteresis current-voltage (I-V) characteristics upon voltage sweeping, revealing the prominent features of nonvolatile memristor behaviors. The numerical simulation of the I-V curves suggests that the carriers generated by the oxidized molecules lead to the increment of conductance. However, the accumulated carriers tend to deteriorate the device endurance. The electroactive sites are fully blocked in the dimethylated molecule DTA-me-DTPZ, preventing the irreversible electrochemical reaction, thereby boosting the endurance of the memristor device over 300 cycles. Despite the considerable improvement in endurance, the decrement of on/off ratio from 105 to 101 after 250 cycles suggests that the excessive charge carriers (radical cations) remains a problem. Thus, a new strategy of doping an electron-deficient material, CN-T2T, into the unipolar active layer was introduced to further improve the device stability. The device containing DTA-me-DTPZ:CNT2T (1:1) blend as the active layer retained the endurance and on/off ratio (∼104) upon sweeping 300 cycles. The molecular designs and doping strategy demonstrate effective approaches toward more stable metal-free organic conjugated small-molecule memristors.

Anti-Quenching NIR-II J-Aggregates of Benzo[c]thiophene Fluorophore for Highly Efficient Bioimaging and Phototheranostics.

Molecular fluorophores with the second near-infrared (NIR-II) emission hold great potential for deep-tissue bioimaging owing to their excellent biocompatibility and high resolution. Recently, J-aggregates are used to construct long-wavelength NIR-II emitters as their optical bands show remarkable red shifts upon forming water-dispersible nano-aggregates. However, their wide applications in the NIR-II fluorescence imaging are impeded by the limited varieties of J-type backbone and serious fluorescence quenching. Herein, a bright benzo[c]thiophene (BT) J-aggregate fluorophore (BT6) with anti-quenching effect is reported for highly efficient NIR-II bioimaging and phototheranostics. The BT fluorophores are manipulated to have Stokes shift over 400 nm and aggregation-induced emission (AIE) property for conquering the self-quenching issue of the J-type fluorophores. Upon forming BT6 assemblies in an aqueous environment, the absorption over 800 nm and NIR-II emission over 1000 nm are boosted for more than 41 and 26 folds, respectively. In vivo visualization of the whole-body blood vessel and imaging-guided phototherapy results verify that BT6 NPs are excellent agent for NIR-II fluorescence imaging and cancer phototheranostics. This work develops a strategy to construct bright NIR-II J-aggregates with precisely manipulated anti-quenching properties for highly efficient biomedical applications.

Engineering the Macrocyclic Donor Structures towards Deep-Blue Thermally Activated Delayed Fluorescence Emitters.

Deep-blue thermally activated delayed fluorescence (TADF) molecules present promising potential in organic light-emitting diodes (OLEDs), especially for display applications. Here, an efficient molecular engineering approach to modifying the donor or acceptor features of the D-π-A-configured TADF molecules for deep-blue emission is reported. By introducing oxygen and sulfone as a bridge unit onto the macrocyclic donor, two emitters, c-ON-MeTRZ and c-NS-MeTRZ, are synthesized and characterized, respectively. The reduced donor strength of c-ON-MeTRZ and c-NS-MeTRZ as compared to that of the model molecule c-NN-MeTRZ leads to blue-shifted emissions with high photoluminescence quantum yields (PLQYs) and retains TADF characters, while the new emitter c-NN-MePym with the most blue-shifted emission only exhibits a pure fluorescent nature because of the electron-accepting feature of pyrimidine that is insufficient for inducing the TADF property. In the presence of macrocyclic donors, these new emitters show high horizontal dipole ratios (Θ// = 85-89%), which are beneficial for improving the light out-coupling efficiency. Deep-blue TADF OLEDs incorporating c-ON-MeTRZ as an emitter doped in the mCPCN host achieves a high maximum external quantum efficiency (EQEmax) of 30.2% together with 1931 Commission Internationale de I'Eclairage (CIE) coordinates of (0.14, 0.13), while the counter device employing c-NS-MeTRZ as a dopant gives EQEmax of 15.4% and CIE coordinates of (0.14, 0.09). The EQEmax of c-ON-MeTRZ- and c-NS-MeTRZ-based devices can be significantly improved to 34.4 and 29.3%, respectively, with a polar host DPEPO, which stabilizes the charge transfer (CT) S1 state to give lower ΔEST for improving the reverse intersystem crossing process. The efficient TADF character, high PLQYs, and high anisotropic emission dipole ratios work together to render the superior electroluminescence (EL) efficiencies. Based on the detailed characterizations of physical properties, theoretical analyses, and comprehensive study on the corresponding devices, a clear structure-property-performance relationship has been successfully established to verify the effective molecular design strategy of modulating the macrocyclic donor characters for efficient deep-blue TADF emitters.

Harnessing 2D Ruddlesden-Popper Perovskite with Polar Organic Cation for Ultrasensitive Multibit Nonvolatile Transistor-Type Photomemristors.

Photomemristors have been regarded as one of the most promising candidates for next-generation hardware-based neuromorphic computing due to their potentials of fast data transmission and low power consumption. However, intriguingly, so far, photomemristors seldom display truly nonvolatile memory characteristics with high light sensitivity. Herein, we demonstrate ultrasensitive photomemristors utilizing two-dimensional (2D) Ruddlesden-Popper (RP) perovskites with a highly polar donor-acceptor-type push-pull organic cation, 4-(5-(2-aminoethyl)thiophen-2-yl)benzonitrile+ (EATPCN+), as charge-trapping layers. High linearity and almost zero-decay retention are observed in (EATPCN)2PbI4 devices, which are very distinct from that of the traditional 2D RP perovskite devices consisting of nonpolar organic cations, such as phenethylamine+ (PEA+) and octylamine+ (OA+), and traditional 3D perovskite devices consisting of methylamine+ (MA+). The 2-fold advantages, including desirable spatial crystal arrangement and engineered energetic band alignment, clarify the mechanism of superior performance in (EATPCN)2PbI4 devices. The optimized (EATPCN)2PbI4 photomemristor also shows a memory window of 87.9 V and an on/off ratio of 106 with a retention time of at least 2.4 × 105 s and remains unchanged after >105 writing-reading-erasing-reading endurance cycles. Very low energy consumptions of 1.12 and 6 fJ for both light stimulation and the reading process of each status update are also demonstrated. The extremely low power consumption and high photoresponsivity were simultaneously achieved. The high photosensitivity surpasses that of a state-of-the-art commercial pulse energy meter by several orders of magnitude. With their outstanding linearity and retention, rabbit images have been rebuilt by (EATPCN)2PbI4 photomemristors, which truthfully render the image without fading over time. Finally, by utilizing the powerful ∼8 bits of nonvolatile potentiation and depression levels of (EATPCN)2PbI4 photomemristors, the accuracies of the recognition tasks of CIFAR-10 image classification and MNIST handwritten digit classification have reached 89% and 94.8%, respectively. This study represents the first report of utilizing a functional donor-acceptor type of organic cation in 2D RP perovskites for high-performance photomemristors with characteristics that are not found in current halide perovskites.