Steering the Reaction Pathway of CO2 Electroreduction by Tuning the Coordination Number of Copper Catalysts.

Cu-based catalysts are optimal for the electroreduction of CO2 to generate hydrocarbon products. However, controlling product distribution remains a challenging topic. The theoretical investigations have revealed that the coordination number (CN) of Cu considerably influences the adsorption energy of *CO intermediates, thereby affecting the reaction pathway. Cu catalysts with different CNs were fabricated by reducing CuO precursors via cyclic voltammetry (Cyc-Cu), potentiostatic electrolysis (Pot-Cu), and pulsed electrolysis (Pul-Cu), respectively. High-CN Cu catalysts predominantly generate C2+ products, while low-CN Cu favors CH4 production. For instance, over the high-CN Pot-Cu, C2+ is the main product, with the Faradaic efficiency (FE) reaching 82.5% and a partial current density (j) of 514.3 mA cm-2. Conversely, the low-CN Pul(3)-Cu favors the production of CH4, achieving the highest FECH4 value of 56.7% with a jCH4 value of 234.4 mA cm-2. In situ X-ray absorption spectroscopy and Raman spectroscopy studies further confirm the different *CO adsorptions over Cu catalysts with different CN, thereby directing the reaction pathway of the CO2RR.

LncRNA GAS5 regulated by FTO-mediated m6A demethylation promotes autophagic cell death in NSCLC by targeting UPF1/BRD4 axis.

Long non-coding RNA (lncRNA) growth arrest-specific transcript 5 (GAS5) has been shown to be a regulator for many cancers, including non-small cell lung cancer (NSCLC). Therefore, its role and mechanism in the process of NSCLC deserve to be further revealed. The expression levels of GAS5, fat mass and obesity-associated protein (FTO) and bromodomain-containing protein 4 (BRD4) were detected by quantitative real-time PCR. Western blot analysis was used to examine the protein expression of FTO, BRD4, up-frameshift protein 1 (UPF1) and autophagy-related markers. Methylated RNA immunoprecipitation was used to assess the m6A level of GAS5 regulated by FTO. Cell proliferation and apoptosis were determined using MTT assay, EdU assay and flow cytometry. Autophagy ability was assessed by immunofluorescence staining and transmission electron microscope. Xenograft tumor model was constructed to explore the effects of FTO and GAS5 on NSCLC tumor growth in vivo. The interaction between UPF1 and GAS5 or BRD4 was confirmed by pull-down assay, RIP assay, dual-luciferase reporter assay, and chromatin immunoprecipitation. Fluorescent in situ hybridization was used to analyze the co-localization of GAS5 and UPF1. Actinomycin D treatment was employed to evaluate BRD4 mRNA stability. GAS5 was downregulated in NSCLC tissues and was associated with poor prognosis in NSCLC patients. FTO was highly expressed in NSCLC, and it inhibited GAS5 expression by reducing GAS5 m6A methylation level. GAS5 suppressed by FTO could promote the autophagic death of NSCLC cells in vitro and inhibit NSCLC tumor growth in vivo. In addition, GAS5 was able to interact with UPF1 to reduce the mRNA stability of BRD4. Knockdown of BRD4 reversed the inhibition of GAS5 or UPF1 silencing on the autophagic cell death of NSCLC. The findings of the study showed that lncRNA GAS5 mediated by FTO could contribute to the autophagic cell death of NSCLC by interacting with UPF1 to reduce BRD4 mRNA stability, suggesting that GAS5 might be a vital therapy target for NSCLC progression.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene.

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Cooperation of Different Active Sites to Promote CO2 Electroreduction to Multi-carbon Products at Ampere-Level.

Electroreduction of CO2 to C2+ products provides a promising strategy for reaching the goal of carbon neutrality. However, achieving high selectivity of C2+ products at high current density remains a challenge. In this work, we designed and prepared a multi-sites catalyst, in which Pd was atomically dispersed in Cu (Pd-Cu). It was found that the Pd-Cu catalyst had excellent performance for producing C2+ products from CO2 electroreduction. The Faradaic efficiency (FE) of C2+ products could be maintained at approximately 80.8 %, even at a high current density of 0.8 A cm-2 for at least 20 hours. In addition, the FE of C2+ products was above 70 % at 1.4 A cm-2. Experiments and density functional theory (DFT) calculations revealed that the catalyst had three distinct catalytic sites. These three active sites allowed for efficient conversion of CO2, water dissociation, and CO conversion, ultimately leading to high yields of C2+ products.

Lattice Strain Engineering Boosts CO2 Electroreduction to C2+ Products.

Regulating the binding effect between the surface of an electrode material and reaction intermediates is essential in highly efficient CO2 electro-reduction to produce high-value multicarbon (C2+) compounds. Theoretical study reveals that lattice tensile strain in single-component Cu catalysts can reduce the dipole-dipole repulsion between *CO intermediates and promotes *OH adsorption, and the high *CO and *OH coverage decreases the energy barrier for C-C coupling. In this work, Cu catalysts with varying lattice tensile strain were fabricated by electro-reducing CuO precursors with different crystallinity, without adding any extra components. The as-prepared single-component Cu catalysts were used for CO2 electro-reduction, and it is discovered that the lattice tensile strain in Cu could enhance the Faradaic efficiency (FE) of C2+ products effectively. Especially, the as-prepared CuTPA catalyst with high lattice tensile strain achieves a FEC2+ of 90.9% at -1.25 V vs. RHE with a partial current density of 486.1 mA cm-2.

Ternary Ionic-Liquid-Based Electrolyte Enables Efficient Electro-reduction of CO2 over Bulk Metal Electrodes.

Using bulk metals as catalysts to get high efficiency in electro-reduction of CO2 is ideal but challenging. Here, we report the coupling of bulk metal electrodes and a ternary ionic-liquid-based electrolyte, 1-butyl-3-methylimidazolium tetrafluoroborate/1-dodecyl-3-methylimidazolium tetrafluoroborate/MeCN to realize highly efficient electro-reduction of CO2 to CO. Over various bulk metal electrodes, the ternary electrolyte not only increases the current density but also suppresses the hydrogen evolution reaction to obtain a high Faradaic efficiency (FE) toward CO. FECO could maintain ∼100% over a wide potential range, and metal electrodes showed very high stability in the ternary electrolyte. It is demonstrated that the aggregation behavior of the ternary electrolyte and the arrangement of two kinds of IL cations with different chain lengths in the electrochemical double layer not only increase the wettability to electrode and CO2 adsorption but also extend the diffusion channel of H+, rendering the high current density and FECO.

Adjacent Copper Single Atoms Promote C-C Coupling in Electrochemical CO2 Reduction for the Efficient Conversion of Ethanol.

The electrochemical CO2 reduction reaction (CO2RR) using renewable electricity is one of the most promising strategies for reaching the goal of carbon neutrality. Multicarbonous (C2+) products have broad applications, and ethanol is a valuable chemical and fuel. Many Cu-based catalysts have been reported to be efficient for the electrocatalytic CO2RR to C2+ products, but they generally offer limited selectivity and current density toward ethanol. Herein, we proposed a silica-mediated hydrogen-bonded organic framework (HOF)-templated approach to preparing ultrahigh-density Cu single-atom catalysts (SACs) on thin-walled N-doped carbon nanotubes (TWN). The content of Cu in the catalysts prepared by this method could be up to 13.35 wt %. It was found that the catalysts showed outstanding performance for the electrochemical CO2RR to ethanol, and the Faradaic efficiency (FE) of ethanol increased with the increase in Cu-N3 site density. The FE of ethanol over the catalysts with 13.35 wt % Cu could reach ∼81.9% with a partial current density of 35.6 mA cm-2 using an H-type cell, which is the best result for electrochemical CO2RR to ethanol to date. In addition, the catalyst could be stably used for more than 25 h. Experimental and density functional theory (DFT) studies revealed that the adjacent Cu-N3 active sites (one Cu atom coordinates with three N) were the active sites for the reaction, and their high density was crucial for the high FE of ethanol because the adjacent Cu-N3 sites with a short distance could promote the C-C coupling synergistically.

Efficiently driving protein-based fragment screening and lead discovery using two-dimensional NMR.

Fragment-based drug discovery (FBDD) and validation of small molecule binders using NMR spectroscopy is an established and widely used method in the early stages of drug discovery. Starting from a library of small compounds, ligand- or protein-observed NMR methods are employed to detect binders, typically weak, that become the starting points for structure-activity relationships (SAR) by NMR. Unlike the more frequently used ligand-observed 1D NMR techniques, protein-observed 2D 1H-15N or 1H-13C heteronuclear correlation (HSQC or HMQC) methods offer insights that include the mechanism of ligand engagement on the target and direct binding affinity measurements in addition to routine screening. We hereby present the development of a set of software tools within the MestReNova (Mnova) package for analyzing 2D NMR for FBDD and hit validation purposes. The package covers three main tasks: (1) unsupervised profiling of raw data to identify outlier data points to exclude in subsequent analyses; (2) batch processing of single-point spectra to identify and rank binders based on chemical shift perturbations or spectral peak intensity changes; and (3) batch processing of multiple titration series to derive binding affinities (KD) by tracing the changes in peak locations or measuring global spectral changes. Toward this end, we implemented and evaluated a set of algorithms for automated peak tracing, spectral binning, and variance analysis by PCA, and a new tool for spectral data intensity comparison using ECHOS. The accuracy and speed of the tools are demonstrated on 2D NMR binding data collected on ligands used in the development of potential inhibitors of the anti-apoptotic MCL-1 protein.

Suggestive evidence of genetic association of IL23R polymorphisms with chronic obstructive pulmonary disease risk in the Chinese population.

BACKGROUND: Chronic obstructive pulmonary disease (COPD) is a worldwide public health problem. Previous genetic association studies have identified several susceptibility loci in the interleukin genes that may participate in the nosogenesis of COPD. This study aimed to evaluate the relationship between IL23R loci and COPD susceptibility in the Chinese population. METHODS: Agena MassARRAY technology was applied to genotype five single nucleotide polymorphisms (SNPs) in the IL23R gene in 498 COPD patients and 498 healthy people. The association between IL23R SNPs and COPD risk was calculated by logistic regression analysis, with odds ratios and 95% confidence intervals. The false-positive report probability analysis was noteworthy for evaluating the significant results. Also, haplotype analysis was performed among IL23R variants, and multifactor dimensionality reduction analysis was performed to assess the SNP-SNP interactions to predict the risk of COPD. RESULTS: Overall analysis showed that rs7517847 had a significant association with an increased risk of COPD. Age-stratified analysis revealed that rs7517847 was significantly related to an increased risk of COPD in people aged over 68 years old. Sex-stratified analysis illustrated a significant association between rs2295359 and rs7517847 and COPD risk in the female population. The significant association of COPD risk with IL23R SNPs was assessed by false-positive report probability values. Additionally, we observed that the haplotypes AAC and GGA formed by rs2201841, rs12743974 and rs10889677 were associated with a reduced risk of COPD (p = 0.009, p = 0.026). Also, the five-loci interaction model formed by rs2295359, rs7517847, rs2201841, rs12743974 and rs10889677 became the best predictor of COPD, with 10/10 cross-validation consistency and 52.4% testing balance accuracy. CONCLUSION: The research indicated a remarkable association between IL23R variants and COPD susceptibility in the Chinese population. Larger samples and functional research are required to ascertain the relationship between IL23R variants and COPD susceptibility.

PC-Phos Enabled Catalytic Palladium-heteroallyl Asymmetric Cycloaddition.

Asymmetric cycloaddition reactions are the most powerful tool to the expeditious construction of enantioenriched cyclic motifs in organic chemistry. In sharp contrast to well-developed cycloaddition reactions via the palladium-trimethylenemethane (Pd-TMM) intermediate, hetero (3 + 2) cycloadditions of the heteroallyl cations remain rare, largely due to their thermally forbidden nature. To the best of our knowledge, there is no example of asymmetric version leading to enantioenriched heterocycles reported so far. Herein we enabled the first example of catalytic asymmetric (3 + 2) cycloaddition of electrophilic palladium-heteroallyl zwitterion intermediate (Pd-OTMM or Pd-NTMM) with cyclic or acyclic 1,3-dienes via a pathway terminated with C-N or C-O bond formation, delivering the highly substituted or fused pyrrolidine and tetrahydrofuran rings in high yields with excellent regio-, diastereo-, and enantioselectivity. Engineering the PC-Phos, one of the chiral sulfinamide phosphine (Sadphos) type ligands, by introducing the di-tert-butyl or/and 3,5-difluorophenyl group is a vital component in achieving excellent catalytic reactivity and enantioselectivity.

Selective Hydrodeoxygenation of Aromatics to Cyclohexanols over Ru Single Atoms Supported on CeO2.

Cyclohexanols are widely used chemicals, which are mainly produced by oxidation of fossil feedstocks. Selective hydrodeoxygenation of lignin derivatives has great potential for producing these chemicals but is challenging to obtain high yields. Here, we report that CeO2-supported Ru single-atom catalysts (SACs) enabled the hydrogenation of the benzene ring and catalyzed etheric C-O(R) bond cleavage without changing the C-O(H) bond, which could afford 99.9% yields of cyclohexanols. As far as we know, this is the first to report that SACs catalyze hydrogenation of the aromatic ring. The reaction mechanism was studied by control experiments and density functional theory calculations. In the catalysts, the Ru-O-Ce sites were formed and one Ru atom was coordinated with about four O atoms. These catalytic sites could realize both the hydrogenation and deoxygenation reactions efficiently, and thus desired cyclohexanols were generated. This work pioneers the single-atom catalysis in aromatic transformation and provides a novel route for synthesis of cyclohexanols.

A diagnosis model in nasopharyngeal carcinoma based on PET/MRI radiomics and semiquantitative parameters.

BACKGROUND: The staging of nasopharyngeal carcinoma (NPC) is of great value in treatment and prognosis. We explored whether a positron emission tomography/ magnetic resonance imaging (PET/MRI) based comprehensive model of radiomics features and semiquantitative parameters was useful for clinical evaluation of NPC staging. MATERIALS AND METHODS: A total of 100 NPC patients diagnosed with non-keratinized undifferentiated carcinoma were divided into early-stage group (I-II) and advanced-stage group (III-IV) and divided into the training set (n = 70) and the testing set (n = 30). Radiomics features (n = 396 × 2) of the primary site of NPC were extracted from MRI and PET images, respectively. Three major semiquantitative parameters of primary sites including maximum standardized uptake value (SUVmax), metabolic tumor volume (MTV), and total lesion glycolysis (TLG) in all NPC patients were measured. After feature selection, three diagnostic models including the radiomics model, the metabolic parameter model, and the combined model were established using logistic regression model. Finally, internal validation was performed, and a nomogram for NPC comprehensive diagnosis has been made. RESULTS: The radiomics model and metabolic parameter model showed an area under the curve (AUC) of 0.83 and 0.80 in the testing set, respectively. The combined model based on radiomics and semiquantitative parameters showed an AUC of 0.90 in the testing set, with the best performance among the three models. CONCLUSION: The combined model based on PET/MRI radiomics and semiquantitative parameters is of great value in the evaluation of clinical stage (early-stage group and advanced-stage group) of NPC.

Diagnostic value and safety of medical thoracoscopy under local anesthesia for unexplained diffuse interstitial lung disease: A retrospective study.

OBJECTIVE: We aimed to explore the safety and diagnostic value of medical thoracoscopic lung biopsy in patients with unexplained diffuse interstitial lung disease (ILD) in a single center pilot study. METHOD: We retrospectively analyzed clinical and pathological diagnostic data from 52 patients with diffuse ILD undergoing medical thoracoscopic lung biopsy. RESULTS: Forty-four cases of diffuse ILD were confirmed pathologically, giving a diagnostic rate of 84.6%. Among these 44 patients, 11 patients were diagnosed with cancer, including eight patients with lung adenocarcinoma, three patients with metastases; two from a gastrointestinal malignancy, and one from a granulosa cell tumor of the ovary. There were 17 cases of idiopathic interstitial pneumonia, including nine cases of usual interstitial pneumonia (UIP), four cases of non-specific interstitial pneumonia (NSIP), three cases of cryptogenic organizing pneumonia (COP), and one case of acute interstitial pneumonia (AIP). There were 12 cases of rare interstitial pneumonias, which included six cases of pulmonary alveolar proteinosis, one case each of pulmonary Langerhans cell histiocytosis (LCH) and pulmonary lymphangiomyomatosis, two cases of nodular sarcoidosis, and two cases of chronic eosinophilic pneumonia. We recorded various complications, including bleeding, infection, and pneumothorax. A total of 28 patients (53.8%) experienced at least one of the above complications, but there were no deaths associated with biopsy. CONCLUSIONS: Medical thoracoscopic lung biopsy appears a safe and effective method for diagnosing diffuse ILD of unknown cause but further prospective studies, with larger numbers, including comparison with other established techniques are required.

Boosting the Productivity of Electrochemical CO2 Reduction to Multi-Carbon Products by Enhancing CO2 Diffusion through a Porous Organic Cage.

Electroreduction of CO2 into valuable fuels and feedstocks offers a promising way for CO2 utilization. However, the commercialization is limited by the low productivity. Here, we report a strategy to enhance the productivity of CO2 electroreduction by improving diffusion of CO2 to the surface of catalysts using porous organic cages (POCs) as an additive. It was noted that the Faradaic efficiency (FE) of C2+ products could reach 76.1 % with a current density of 1.7 A cm-2 when Cu-nanorod(nr)/CC3 (one of the POCs) was used, which were much higher than that using Cu-nr. Detailed studies demonstrated that the hydrophobic pores of CC3 can adsorb a large amount of CO2 for the reaction, and the diffusion of CO2 in the CC3 to the nanocatalyst surface is easier than that in the liquid electrolyte. Thus, more CO2 molecules make contact with the nanocatalysts in the presence of CC3, enhancing CO2 reduction and inhibiting generation of H2 .

Pd/GF-Phos-Catalyzed Asymmetric Three-Component Coupling Reaction to Access Chiral Diarylmethyl Alkynes.

Significant attention has been given in the past few years to the selective transformations of N-tosylhydrazones to various useful compounds. However, the development of enantioselective versions poses considerable challenges. Herein we report a Pd-catalyzed enantioselective three-component coupling of N-tosylhydrazone, aryl halide, and terminal alkyne under mild conditions utilizing a novel chiral sulfinamide phosphine ligand (GF-Phos), which provides a facile access to chiral diarylmethyl alkynes, which are useful synthons in organic synthesis as well as exist as the skeleton in many bioactive molecules. A pair of enantiomers of the product could be easily prepared using the same chiral ligand by simply changing the aryl substituents of the N-tosylhydrazone and aryl halide. The salient features of this reaction include the readily available starting materials, general substrate scope, high enantioselectivity, ease of scale-up, mild reaction conditions, and versatile transformations.

Palladium-Catalyzed Asymmetric Tandem Denitrogenative Heck/Tsuji-Trost of Benzotriazoles with 1,3-Dienes.

The asymmetric denitrogenative cycloaddition has emerged as a powerful tool to build chiral aza-heterocyles. However, only one example of asymmetric denitrogenative cycloaddition of benzotriazole with unsaturated hydrocarbons has been explored so far, because the ring-opening of benzotriazole to generate α-imino metal carbenoid species is a thermodynamically unfavorable process. We herein report an efficient asymmetric denitrogenative cycloaddition of benzotriazoles with cyclic and acyclic 1,3-dienes enabled by Pd and chiral sulfonamide phosphine ligand. A variety of substituted hexahydrocarbazoles and indolines were delivered in good yields with high ee values. Interestingly, a pair of enantiomers could be obtained with the use of Xu1 and PC2 with the same absolute configuration. The synthetic utilities of the optically active hexahydrocarbazoles were also showcased.

Progranulin and Activin A Concentrations are Elevated in Serum from Patients with Acute Exacerbations of Idiopathic Pulmonary Fibrosis.

PURPOSE: Idiopathic pulmonary fibrosis (IPF) is a chronic, progressive fibrotic lung disease of unknown cause with a variable course. Acute exacerbations of IPF (AE-IPF) is sudden accelerations of the disease or a superimposed idiopathic acute injury significantly reducing lung function. To examine the serum concentrations of Progranulin (PGRN) and activin A in patients with AE-IPF in a pilot study. METHODS: Twenty-one patients with AE-IPF were compared with 23 patients with stable IPF as a control group. Serum PGRN and activin A levels, arterial blood gas measurements, and lung function were determined in these two groups. RESULTS: Peripheral blood PGRN and activin A levels in patients with AE-IPF were 83.7 + 10.0 and 14.2 ± 1.7 ng/ml (mean + SD), respectively; higher than those in the control group 61.0 + 5.8 and 5.8 + 1.0 (p < 0.001). PGRN and activin A levels were significantly negatively correlated with carbon monoxide diffusion capacity r = - 0.857 (p < 0.001) and r = - 0.757 (p < 0.001). CONCLUSION: Progranulin (PGRN) and activin A may be involved in the pathogenesis of AE-IPF. They may be possible markers of disease activity in AE-IPF.

Contamination and Biofilm Formation of Foodborne and Opportunistic Pathogens in Yellow-Feathered Chicken Carcass.

This study aims to analyze the contamination and biofilm formation of foodborne and opportunistic pathogens in yellow-feathered chicken carcasses sampled in different seasons and to prove the relationship between biofilm-forming ability and bacterial extracellular polysaccharide (EPS) production. A total of 78 strains were isolated from chicken samples. The strains consisted of 30.8% Escherichia coli, 14.1% Pseudomonas aeruginosa, 12.8% Salmonella enteritidis, 12.8% Klebsiella pnenmoniae, 10.2% Enterobacter cloacae, 8.9% Proteus mirabilis, 5.1% Klebsiella oxytoca, 1.3% Staphylococcus aureus, and 1.3% Citrobacter braakii. Crystal violet staining assay revealed six strains with strong biofilm-forming ability, namely, E. coli S7, K. oxytoca B12, K. pnenmoniae B6, S. enteritidis H4, P. aeruginosa M5, and S. aureus G1, which showed had high abilities of cell motility and EPS production. Confocal laser scanning microscopy and scanning electron microscopy showed that all six strains can form mature biofilm architectures after 5 d of cultivation. This study may serve as a reference to control the contamination of foodborne pathogens in yellow-feathered chicken and enhance the quality and shelf life of these chicken products.

Palladium/TY-Phos-Catalyzed Asymmetric Intermolecular α-Arylation of Aldehydes with Aryl Bromides.

Despite much progress has been made in the asymmetric α-arylation reactions of cyclic ketones, lactones and lactams, the enantioselective α-arylation of acyclic carbonyl compounds lagged much behind due to the in situ generated Z/E-enolate intermediates leading to opposite enantiomers. Especially, the asymmetric α-arylation of acyclic aldehydes is a long-standing challenge, because of the highest activity among carbonyl compounds leading to various competitive side reactions. Herein we reported an efficient Pd-catalyzed asymmetric intermolecular α-arylation reaction of α-alkyl-α-aryl disubstituted aldehydes with aryl bromides, which provides a rapid access to chiral aldehydes bearing an α-all-carbon quaternary stereocenter in moderate to good yields with good er in most cases. In addition, a pair of enantiomers could be easily prepared with the use of the same ligand by exchanging the aryl groups of aldehyde and aryl bromide.

Hierarchical Metal-Polymer Hybrids for Enhanced CO2 Electroreduction.

The design of catalysts with high activity, selectivity, and stability is key to the electroreduction of CO2 . Herein, we report the synthesis of 3D hierarchical metal/polymer-carbon paper (M/polymer-CP) electrodes by in situ electrosynthesis. The 3D polymer layer on CP (polymer-CP) was first prepared by in situ electropolymerization, then a 3D metal layer was decorated on the polymer-CP to produce the M/polymer-CP electrode. Electrodes with different metals (e.g. Cu, Pd, Zn, Sn) and various polymers could be prepared by this method. The electrodes could efficiently reduce CO2 to desired products, such as C2 H4 , CO, and HCOOH, depending on the metal used. For example, C2 H4 could be formed with a Faradaic efficiency of 59.4 % and a current density of 30.2 mA cm-2 by using a very stable Cu/PANI-CP electrode in an H-type cell. Control experiments and theoretical calculations showed that the 3D hierarchical structure of the metals and in situ formation of the electrodes are critical for the excellent performance.