Optimizing auxiliary laser heating for Kerr soliton microcomb generation.

Auxiliary laser heating has become a widely adopted method for Kerr soliton frequency comb generation in optical microcavities, thanks to its reliable and easy-to-achieve merits for solving the thermal instability during the formation of dissipative Kerr solitons. Here, we conduct optimization of auxiliary laser heating by leveraging the distinct loss and absorption characteristics of different longitudinal and polarization cavity modes. We show that even if the auxiliary and pump lasers enter orthogonal polarization modes, their mutual photothermal balance can be efficient enough to maintain a cavity thermal equilibrium as the pump laser enters the red-detuning soliton regime, and by choosing the most suitable resonance for the auxiliary and pump lasers, the auxiliary laser power can be reduced to 20% of the pump laser and still be capable of warranting soliton generation. Moreover, we demonstrate soliton comb generation using integrated laser modules with a few milliwatt on-chip pump and auxiliary powers, showcasing the potential for further chip integration of the auxiliary laser heating method.

Polarization multiplexed dissipative Kerr solitons in an on-chip micro-resonator.

We demonstrate polarization multiplexed dissipative Kerr solitons in an on-chip silicon nitride micro-resonator. In our experiment, TE- and TM-polarized solitons can be individually generated and controlled, thanks to their weak mutual interaction as the result of sufficiently different repetition rates and orthogonal polarization states. Furthermore, we find that TE- and TM-polarized solitons usually exhibit uncorrelated time jitters. Therefore, the frequency and phase coherence between the polarization multiplexed soliton microcombs change dramatically as a function of pump laser parameters, where by optimization, we achieve a narrow dual-microcomb beat note linewidth as small as 4.4 kHz. Potential applications of on-chip polarization multiplexed soliton microcombs include Kerr comb spectral expansion, dual-comb metrology, and measurement of quantum entanglements.

Wavelength-division multiplexing communications using integrated soliton microcomb laser source.

In this Letter, we report an investigation of the feasibility and performance of wavelength-division multiplexed (WDM) optical communications using an integrated perfect soliton crystal as the multi-channel laser source. First, we confirm that perfect soliton crystals pumped directly by a distributed-feedback (DFB) laser self-injection locked to the host microcavity has sufficiently low frequency and amplitude noise to encode advanced data formats. Second, perfect soliton crystals are exploited to boost the power level of each microcomb line, so that it can be directly used for data modulation, excluding preamplification. Third, in a proof-of-concept experiment, we demonstrate seven-channel 16-quadrature amplitude modulation (16-QAM) and 4-level pulse amplitude modulation (PAM4) data transmissions using an integrated perfect soliton crystal as the laser carrier; excellent data receiving performance is obtained for various fiber link distances and amplifier configurations. Our study reveals that fully integrated Kerr soliton microcombs are viable and advantageous for optical data communications.

Phase noise of Kerr soliton dual microcombs.

Dissipative Kerr soliton microcombs are believed to be a promising technique to build a dual-comb source for applications including precision laser metrology, fast laser spectroscopy, and high-speed optical signal processing. In this Letter, we conduct a detailed experimental investigation on the phase coherence between two on-chip Kerr soliton microcombs, where the underlying physical and technical origins that lead to the mutual phase noise between microcombs are analyzed. Moreover, the techniques of 2-point locking and optical frequency division are explored to enhance the dual-microcomb phase coherence, and we demonstrate the best phase noise down to -50 dBc/Hz at 1-Hz offset, -90 dBc/Hz at 1-kHz offset, and -120 dBc/Hz at 1-MHz offset. Our study provides a basic reference for both fundamental studies and practical applications of Kerr soliton dual microcombs that entail high mutual phase coherence.

Massive and parallel 10 Tbit/s physical random bit generation with chaotic microcomb.

Ultrafast physical random bit (PRB) generators and integrated schemes have proven to be valuable in a broad range of scientific and technological applications. In this study, we experimentally demonstrated a PRB scheme with a chaotic microcomb using a chip-scale integrated resonator. A microcomb contained hundreds of chaotic channels, and each comb tooth functioned as an entropy source for the PRB. First, a 12 Gbits/s PRB signal was obtained for each tooth channel with proper post-processing and passed the NIST Special Publication 800-22 statistical tests. The chaotic microcomb covered a wavelength range from 1430 to 1675 nm with a free spectral range (FSR) of 100 GHz. Consequently, the combined random bit sequence could achieve an ultra-high rate of about 4 Tbits/s (12 Gbits/s × 294 = 3.528 Tbits/s), with 294 teeth in the experimental microcomb. Additionally, denser microcombs were experimentally realized using an integrated resonator with 33.6 GHz FSR. A total of 805 chaotic comb teeth were observed and covered the wavelength range from 1430 to 1670 nm. In each tooth channel, 12 Gbits/s random sequences was generated, which passed the NIST test. Consequently, the total rate of the PRB was approximately 10 Tbits/s (12 Gbits/s × 805 = 9.66 Tbits/s). These results could offer potential chip solutions of Pbits/s PRB with the features of low cost and a high degree of parallelism.

Cadmium pollution alters earthworm activity and thus leaf-litter decomposition and soil properties.

It has been reported that heavy metal contamination can affect litter decomposition and soil properties through its impact on microbial communities. However, it is still unclear whether the expected changes in earthworm activities in responses to heavy metal contamination could affect these properties. Therefore, we quantified earthworm (Eisenia fetida) responses in survival rate to lethal cadmium (Cd) concentrations (0, 50, 100, 150, 200, 250, and 300 mg L-1), and in burrowing ability, physiological characteristics, and feeding rate (on poplar leaf litter) to sub-lethal Cd concentrations (0, 15, 30, and 45 mg kg-1). Finally, sub-lethal influences of Cd on the decomposition rate of poplar leaf litter and on soil properties were investigated in the present of E. fetida. The 12-, 24-, 36-, and 48-h LC50 of Cd for E. fetida were 276.0, 208.6, 192.6, 179.8 mg L-1, respectively. With increasing Cd concentration, malondialdehyde was stimulated, superoxide dismutase first increased and then decreased, while feeding rate, total borrowing length, and maximum burrowing depth consistently decreased. Consequently, leaf-litter decomposition rate and soil nutrient concentrations generally decreased with increasing Cd concentration. Our results indicate that, by affecting earthworm activities, Cd inhibited leaf-litter decomposition and led to the degradation of soil fertility. This study highlights the importance of earthworms in mediating soil functions under heavy metal stress.