Transition Metal Single-Atom Catalysts for the Electrocatalytic Nitrate Reduction: Mechanism, Synthesis, Characterization, Application, and Prospects.

Excessive accumulation of nitrate in the environment will affect human health. To combat nitrate pollution, chemical, biological, and physical technologies have been developed recently. The researcher favors electrocatalytic reduction nitrate reaction (NO3 RR) because of the low post-treatment cost and simple treatment conditions. Single-atom catalysts (SACs) offer great activity, exceptional selectivity, and enhanced stability in the field of NO3 RR because of their high atomic usage and distinctive structural characteristics. Recently, efficient transition metal-based SACs (TM-SACs) have emerged as promising candidates for NO3 RR. However, the real active sites of TM-SACs applied to NO3 RR and the key factors controlling catalytic performance in the reaction process remain ambiguous. Further understanding of the catalytic mechanism of TM-SACs applied to NO3 RR is of practical significance for exploring the design of stable and efficient SACs. In this review, from experimental and theoretical studies, the reaction mechanism, rate-determining steps, and essential variables affecting activity and selectivity are examined. The performance of SACs in terms of NO3 RR, characterization, and synthesis is then discussed. In order to promote and comprehend NO3 RR on TM-SACs, the design of TM-SACs is finally highlighted, together with the current problems, their remedies, and the way forward.

Deregulation of Ribosome Biogenesis in Nitrite-Oxidizing Bacteria Leads to Nitrite Accumulation.

Nitrite (NO2-) accumulation caused by nitrite-oxidizing bacteria (NOB) inhibition in nitrification is a double-edged sword, i.e., a disaster in aquatic environments but a hope for innovating nitrogen removal technology in wastewater treatment. However, little information is available regarding the molecular mechanism of NOB inhibition at the cellular level. Herein, we investigate the response of NOB inhibition on NO2- accumulation established by a side-stream free ammonia treatment unit in a nitrifying reactor using integrated metagenomics and metaproteomics. Results showed that compared with the baseline, the relative abundance and activity of NOB in the experimental stage decreased by 91.64 and 68.66%, respectively, directly resulting in a NO2- accumulation rate of 88%. Moreover, RNA polymerase, translation factors, and aa-tRNA ligase were significantly downregulated, indicating that protein synthesis in NOB was interfered during NO2- accumulation. Further investigations showed that ribosomal proteins and GTPases, responsible for bindings between either ribosomal proteins and rRNA or ribosome subunits, were remarkably downregulated. This suggests that ribosome biogenesis was severely disrupted, which might be the key reason for the inhibited protein synthesis. Our findings fill a knowledge gap regarding the underlying mechanisms of NO2- accumulation, which would be beneficial for regulating the accumulation of NO2- in aquatic environments and engineered systems.

In Situ Grown Single-Atom Cobalt on Polymeric Carbon Nitride with Bidentate Ligand for Efficient Photocatalytic Degradation of Refractory Antibiotics.

Semiconductor photocatalysis is a promising technology to tackle refractory antibiotics contamination in water. Herein, a facile in situ growth strategy is developed to implant single-atom cobalt in polymeric carbon nitride (pCN) via the bidentate ligand for efficient photocatalytic degradation of oxytetracycline (OTC). The atomic characterizations indicate that single-atom cobalt is successfully anchored on pCN by covalently forming the CoO bond and CoN bond, which will strengthen the interaction between single-atom cobalt and pCN. This single-atom cobalt can efficiently expand optical absorption, increase electron density, facilitate charge separation and transfer, and promote OTC degradation. As the optimal sample, Co(1.28%)pCN presents an outstanding apparent rate constant for OTC degradation (0.038 min-1 ) under visible light irradiation, which is about 3.7 times than that of the pristine pCN. The electron spin resonance (ESR) tests and reactive species trapping experiments demonstrate that the 1 O2 , h+ , •O2- , and •OH are responsible for OTC degradation. This work develops a new way to construct single-atom-modified pCN and provides a green and highly efficient strategy for refractory antibiotics removal.

Impact of thyroid function on cystatin C in detecting acute kidney injury: a prospective, observational study.

BACKGROUND: Cystatin C (Cys C) used clinically for detecting early acute kidney injury (AKI) was reported to be associated with thyroid function. Therefore, whether the performance of Cys C is affected by thyroid hormones has raised concern in critically ill patients. This study aimed to investigate the impact of thyroid hormones on the diagnostic and predictive accuracy of Cys C for AKI, and hence optimize the clinical application of Cys C. METHODS: A prospective observational study was conducted in the general intensive care units (ICUs). Serum creatinine (SCr), Cys C, and thyroid function were documented for all patients at ICU admission. Patients were separated into five quintiles based on free triiodothyronine (FT3) and total triiodothyronine (TT3), and two categories according to the presence of low T3 syndrome or not. The impact of thyroid function on the performance of Cys C in diagnosing and predicting AKI was assessed by area under the receiver operating characteristic curve (AUC). RESULTS: The AKI incidence was 30.0% (402/1339); 225 patients had AKI upon entry, and 177 patients developed AKI during the subsequent 7 days. The AUCs for Cys C in detecting total AKI, established AKI, and later-onset AKI was 0.753, 0.797, and 0.669, respectively. The multiple linear regression analysis demonstrated that TT3 and FT3 were independently associated with Cys C. Overall, although Cys C did not yield any significant difference in AUCs for detecting AKI among patients with different thyroid hormones, the optimal cut-off value of Cys C to detect AKI was markedly different between patients with and without low T3 syndrome. CONCLUSIONS: The thyroid function had no significant impact on the diagnostic and predictive accuracy of Cys C in detecting AKI in ICU patients. However, the optimal cut-off value of Cys C to detect AKI could be affected by thyroid function.

Triterpenes and Meroterpenes with Neuroprotective Effects from Ganoderma leucocontextum.

Ganoderma leucocontextum is a well-known medicinal mushroom cultivated in the Tibet Plateau of China. Chemistry investigation on the fruiting bodies of this mushroom resulted in the isolation of sixteen secondary metabolites including three new lanostane triterpenes, ganoleucoins Q - S (1 - 3), as well as thirteen known compounds (4 - 16). The structures of compounds 1 - 3 were determined by NMR, MS, CD spectral analysis, and chemical derivation method. The neuroprotective effects of compounds 1 - 16 were tested on PC12 cells. Compounds 1 and 2 showed protective effects against the H2 O2 induced damage with the survival rate of 83.19 ± 0.92%, 73.37 ± 1.25% at the concentration of 200 µm, respectively. Meanwhile, compounds 1 and 2 induced neurite outgrowth at 50 - 200 µm. The results from this study suggested that G. leucocontextum and its metabolites may be potential functional food ingredients for the prevention of neurodegenerative diseases.

Numerical simulation and exploration of electrocoagulation process for arsenic and antimony removal: Electric field, flow field, and mass transfer studies.

In order to intuitively and clearly evaluate the potential and current distribution, the fluid flow and mixing, as well as mass transfer involved in electrocoagulation process for As and Sb removal, numerical simulation of electric field, flow field and mass transfer were constructed by Comsol Multiphysics and verified by experiments. Results displayed that the primary current and potential distribution were improved by changing electrode distance or adding insulator in a batch reactor. When configuration 2 and 2 cm electrode distance were applied, a more uniform primary current distribution and higher electrode current efficiency were obtained. In a continuous flow reactor, the increase of flow rate resulted in the left shift of the peak in residence time distribution curve, gradual decrease of the tailing area, reduction of the stagnation zone, and more uniform mixing of the fluid. However, higher than 0.043 L/min was unfavorable to the formation of flocs and its effective combination with pollutants. According to the simulation of mass transfer, at the initial stage, the rate of electrolysis/hydrolysis was greater than that of mass transfer. Fe2+, OH-, and Fe(OH)2 were primarily concentrated on the anode, cathode, and between the two electrodes, respectively. Under the action of electromigration, diffusion and convection, the concentration distribution of Fe(OH)2 increased at the direction of streamline. The concentration of Fe2+ and OH- achieved the minimum value at the outlet. However, Fe(OH)+ concentration and distribution were hardly affected by the treatment time, and once generated, immediately proceed to the next hydrolysis reaction.

Lanostane Triterpenes from the Tibetan Medicinal Mushroom Ganoderma leucocontextum and Their Inhibitory Effects on HMG-CoA Reductase and α-Glucosidase.

Sixteen new lanostane triterpenes, ganoleucoins A-P (1-16), together with 10 known tripterpenes (17-26), were isolated from the cultivated fruiting bodies of Ganoderma leucocontextum, a new member of the Ganoderma lucidum complex. The structures of the new compounds were elucidated by extensive spectroscopic analysis and chemical transformation. The inhibitory effects of 1-26 on HMG-CoA reductase and α-glucosidase were tested in vitro. Compounds 1, 3, 6, 10-14, 17, 18, 23, 25, and 26 showed much stronger inhibitory activity against HMG-CoA reductase than the positive control atorvastatin. Compounds 13, 14, and 16 presented potent inhibitory activity against α-glucosidase from yeast with IC50 values of 13.6, 2.5, and 5.9 µM, respectively. In addition, the cytotoxicity of 1-26 was evaluated against the K562 and PC-3 cell lines by the MTT assay. Compounds 1, 2, 6, 7, 10, 12, 16, 18, and 25 exhibited cytotoxicity against K562 cells with IC50 values in the range 10-20 µM. Paclitaxel was used as the positive control with an IC50 value of 0.9 µM. This is the first report of secondary metabolites from this medicinal mushroom.

Metagenomic insights into the toxicity of carbamazepine to functional microorganisms in sludge anaerobic digestion.

Contaminants of emerging concern (CECs) contained in sludge, such as carbamazepine, may be toxic to microorganisms and affect the biogenesis of methane during anaerobic digestion. In this study, different scales of anaerobic digesters were constructed to investigate the inhibitory effect of carbamazepine. Results showed that carbamazepine reduced methane production by 11.3 % and 62.1 % at concentrations of 0.4 and 2 mg/g TS, respectively. Carbamazepine hindered the dissolution of organic matter and the degradation of protein. Carbamazepine inhibited some fermentative bacteria, especially uncultured Aminicenantales, whose abundance decreased by 9.5-93.4 % under carbamazepine stress. It is worth noting that most prior studies investigated the effects of CECs only based on well-known microorganisms, ignoring the metabolisms of uncultured microorganisms. Genome-predicted metabolic potential suggested that 54 uncultured metagenome-assembled genomes (MAGs) associated with acidogenesis or acetogenesis. Therein, uncultured Aminicenantales related MAGs were proved to be acetogenic fermenters, their significant reduction may be an important reason for the decrease of methane production under carbamazepine stress. The toxicity of carbamazepine to microorganisms was mainly related to the overproduction of reactive oxygen species. This study elucidates the inhibition mechanism of carbamazepine and emphasizes the indispensable role of uncultured microorganisms in anaerobic digestion.

Detection of pathogens from venous or arterial blood of patients with left-sided infective endocarditis by metagenomic next-generation sequencing: A prospective study.

BACKGROUND: Infective endocarditis is a life-threatening uncommon infectious disease, and we aimed to explore the clinical utility of venous or arterial blood-based metagenomic next-generation sequencing (mNGS) approaches to diagnose left-sided infective endocarditis (LSIE). METHODS: We prospectively studied 79 LSIE patients who received valvular surgery in our hospital. Results of blood culture, valve culture, venous blood-based mNGS, arterial blood-based mNGS, venous blood-based mNGS plus blood culture, and arterial blood-based mNGS plus blood culture were evaluated and compared. RESULTS: Both venous blood- and arterial blood-based mNGS methods displayed significantly higher positive detection rates than blood culture and valve culture (43.0 %, 49.4 % vs. 32.9 %, 19.0 %; P < 0.001). Strikingly, when combining blood-based mNGS and blood culture, the positive rate could be further improved to more than 60 %. Moreover, we found mNGS LSIE detection was closely associated with preoperative leukocyte (P = 0.027), neutrophil value (P = 0.018), vegetation ≥ 14 mm (P = 0.043), and vegetations in aortic valve (P = 0.048). In addition, we discovered that blood-based mNGS had a superir capacity over blood culture to detect gram-negative bacteria, fungi, Bartonella Quintana, and mixed infections than blood culture. CONCLUSION: This study indicates that venous blood- and arterial blood-based mNGS displayed high positive rate in the rapid detection of pathogens in high-risk LSIE patients.

Oxygen Doping Cooperated with Co-N-Fe Dual-Catalytic Sites: Synergistic Mechanism for Catalytic Water Purification within Nanoconfined Membrane.

Atom-site catalysts, especially for graphitic carbon nitride-based catalysts, represents one of the most promising candidates in catalysis membrane for water decontamination. However, unravelling the intricate relationships between synthesis-structure-properties remains a great challenge. This study addresses the impacts of coordination environment and structure units of metal central sites based on Mantel test, correlation analysis, and evolution of metal central sites. An optimized unconventional oxygen doping cooperated with Co-N-Fe dual-sites (OCN Co/Fe) exhibits synergistic mechanism for efficient peroxymonosulfate activation, which benefits from a significant increase in charge density at the active sites and the regulation in the natural population of orbitals, leading to selective generation of SO4 •-. Building upon these findings, the OCN-Co/Fe/PVDF composite membrane demonstrates a 33 min-1 ciprofloxacin (CIP) rejection efficiency and maintains over 96% CIP removal efficiency (over 24 h) with an average permeance of 130.95 L m-2 h-1. This work offers a fundamental guide for elucidating the definitive origin of catalytic performance in advance oxidation process to facilitate the rational design of separation catalysis membrane with improved performance and enhanced stability.

Investigating possible dilated cardiomyopathy targets via bioinformatic analysis.

Dilated cardiomyopathy (DCM) is the most common cardiomyopathy associated with heart failure; however, the underlying mechanism remains unclear. Initially, gene expression data of patients with DCM from the GSE4172 and GSE21610 datasets were obtained from the Gene Expression Omnibus website. Differentially expressed genes (DEGs) were analyzed with a false discovery rate < 0.05 and log2 fold change > 1.2. Furthermore, both the Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis and Gene Set Enrichment Analysis (GSEA) were used to investigate the functional annotations. STRING and Cytoscape tools were used to form the protein-protein interaction (PPI) network and authenticate hub genes. Thereafter, the signature of immune-related genes (IRGs) was selected from the DEGs and data via the IMMPORT website. Hub genes were selected from the differentially expressed IRGs that formed the PPI network. Finally, the receiver-operating characteristic curves of the key genes were measured as biomarkers of DCM. A total of 173 independent DEGs (103 upregulated and 70 downregulated genes) were found in the microarray datasets GSE4172 and GSE21610. KEGG analysis and GSEA indicated that the BMP signaling pathway and apoptosis-related signals have a key effect on DCM development. The 10 hub genes also indicated the key effect of the BMP signaling pathway on DCM. A total of 224 differentially expressed IRGs and 20 featured IRGs were identified. Finally, BMP6, CD69, RUNX2, and SPP1 were identified as possible targets for DCM. Our data suggest a possible molecular regulatory mechanism for DCM therapy. Moreover, BMP6, CD69, RUNX2, and SPP1 may have key effects on the development of DCM.

Rational design of cobalt sulfide anchored on nitrogen-doped carbon derived from cyanobacteria waste enables efficient activation of peroxymonosulfate for organic pollutants oxidation.

With the increasing of eutrophication in water body, algae blooms have become one of the global environmental problems. The cyanobacteria waste has placed a severe burden on the environment and transforming cyanobacteria into functional materials may be a wise approach. Herein, cobaltous sulfide/nitrogen-doped biochar (N-BC/CoSx) composite was synthesized by pyrolysis of cyanobacteria waste. The N-BC/CoSx showed excellent performance in peroxymonosulfate (PMS) activation for enrofloxacin (ENR) degradation, which could remove more than 90% ENR within 60 min. The influencing factors of pH and catalyst dosage on ENR removal efficiency were studied. The N-BC/CoSx showed good recyclability in the cycle runs. The radicals (O2•-, OH andSO4•-) and the non-radical species (charge transfer and 1O2) were generated in the ENR degradation. The cycle of Co(II)/Co(III) m ay contribute to the radical generation process. This work proved that metal sulfide modified cyanobacteria biochar has a specific application value in water pollution control and provides a new method for resource utilization of cyanobacteria.

Structure-performance correlation guided cerium-based metal-organic frameworks: Superior adsorbents for fluoride removal in water.

Fluoride in the hydrosphere exceeds the standard, which could be critically hazardous to human health and the natural environment. The adsorption method is a mature and effective way to remove pollutants in water, including fluoride. In this study, we synthesized three kinds of cerium-based metal-organic frameworks (Ce-MOFs) with different structures and properties by modulating the organic ligands (i.e., trimesic acid (BTC), 1,2,4,5-benzenetetracarboxylic acid (PMA), and terephthalic acid (BDC)) via the solvothermal method. The adsorption kinetics of Ce-MOFs on fluoride well fit the pseudo second order model, and their adsorption isotherms also conform to Langmuir isothermal model. The thermodynamic study reveals that the adsorption process is a spontaneous endothermic reaction. The maximum saturated adsorption capacities of Ce-BTC, Ce-PMA, and Ce-BDC are 70.7, 159.6, and 139.5 mg g-1, respectively. Ce-MOFs have stable and excellent adsorption capacity at pH = 3-9. Coexisting anions (Cl-, SO42-, and NO3-) do not affect the performance of Ce-MOFs for fluoride removal. Moreover, Ce-MOFs also show their broad prospect as superior fluoride adsorbents because of their excellent performance and reusability in real water samples. Organic ligands have a remarkable influence on the defluoridation performance of Ce-MOFs. This work will provide a feasible idea for designing MOFs as superiors adsorbents for defluoridation.

Microplastics influence the fate of antibiotics in freshwater environments: Biofilm formation and its effect on adsorption behavior.

Microplastics (MPs) are substrates available for biofilms colonization in natural water environments. The biofilms formation may enhance the ability of MPs to adsorb harmful contaminants. Herein, we investigated the biofilms formation of three different MPs (PVC, PA and HDPE) in simulated natural environment, and observed the chemical structure, charge property, hydrophobicity and other properties of MPs affect microbial biomass and community composition. More importantly, potential pathogens were found in all three MPs biofilms. Furthermore, the adsorption capacities of original MPs and biological aging MPs for norfloxacin (NOR) was compared. HDPE has the largest adsorption capacity for NOR, while PA has the smallest adsorption capacity for NOR. It was concluded that the formation of biofilms enhanced the adsorption of NOR by 50.60 %, 24.17 % and 46.02 % for PVC, PA and HDPE, respectively. In addition, hydrogen-bond interaction, electrostatic interaction and hydrophobic interaction were found to dominate the adsorption of NOR by MPs. Our study contributed to improve the understanding of the interactions between aging MPs and contaminants in the natural water environments, and provided essential information for ecological risk assessment of MPs.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems.

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Plastic bottles for chilled carbonated beverages as a source of microplastics and nanoplastics.

Carbonated beverages are characterized by low temperatures, multiple microbubbles, high pressure, and an acidic environment, creating ideal conditions for releasing contaminants from plastic bottles. However, the release patterns of microplastics (MPs) and nanoplastics (NPs) are poorly understood. We investigated the effects of plastic type, CO2 filling volume, temperature, sugar content, and additive on the leakage of MPs/NPs and heavy metals. Our results showed that polypropylene bottles released greater MPs (234±9.66 particles/L) and NPs (9.21±0.73 × 107 particles/L) than polyethylene and polyethylene terephthalate bottles. However, subjecting the plastic bottles to 3 repeated inflation treatments resulted in 91.65-93.18% removal of MPs/NPs. The release of MPs/NPs increased with increasing CO2 filling volume, driven by the synergistic effect of CO2 bubbles and pressure. After 4 freeze-thaw cycles, the release of MPs and NPs significantly increased, reaching 450±38.65 MPs and 2.91±0.10 × 108 NPs per liter, respectively. The presence of sugar leads to an elevation in MPs release compared to sucrose-free carbonated water, while the addition of additives to carbonated water exhibits negligible effects on MPs release. Interestingly, actual carbonated beverages demonstrated higher MPs concentrations (260.52±27.18-281.38±61.33 particles/L) than those observed in our well-controlled experimental setup. Our study highlights the non-negligible risk of MPs/NPs in carbonated beverages at low temperatures and suggests strategies to mitigate human ingestion of MPs/NPs, such as selecting appropriate plastic materials, high-pressure carbonated water pretreatment, and minimizing freeze-thaw cycles. Our findings provide insights for further study of the release patterns of the contaminants in natural environments with bubbles, pressure, low temperature, and freeze-thaw conditions.

Insight into the effect of pyrolysis temperature on photoreactivity of biochar-derived dissolved organic matter: Impacts of aromaticity and carbonyl groups.

Practical application of biochar may result in more biochar-derived dissolved organic matter (denoted as BDOM) inevitably release into surface waters by infiltration and surface runoff. The photochemical reaction of BDOM has gained intense attention, which played a key role in the fate of organic contaminants. However, the relationships between specific characteristics of BDOM and its photoreactivity are still uncertain. In this study, the characteristics of BDOM pyrolyzed from rice husk derived biochar at different temperature (from 400 °C to 700 °C) and their effect on the photodegradation of oxytetracycline (OTC) were carefully investigated. The 13C NMR and EEM results indicated the dominated component of BDOM was gradually turned from humic acid like substances with low aromaticity to high aromaticity with abundant oxygen-containing functional groups as pyrolytic temperature increases. Experimental results showed that the apparent rate constants (kobs) of BDOM700 (4.53 × 10-2 min-1) for OTC photodegradation was approximately one order of magnitude higher than BDOM400 (4.52 × 10-3 min-1), which was closely correlated with their aromaticity (R2 = 0.944). It was found that 3BDOM* rather than 1O2 played the major role in BDOM mediated photodegradation of OTC (80.13 % vs 14.34 %), and the carbonyl-containing group was identified as the main 3BDOM* precursor by NaBH4 reduction experiment. This work highlighted both aromaticity and carbonyl group contents were critical indicators for assessing the potential to generate 3BDOM* and corresponding photoreactivity.

Advanced oxidation protein products as prognostic biomarkers for recovery from acute kidney injury after coronary artery bypass grafting.

Recovery from acute kidney injury (AKI) is related to long-term prognosis. This study, involving 56 patients with AKI and 56 controls from a prospective cohort undergoing coronary artery bypass grafting (CABG), investigated the prognostic performance of serum levels of advanced oxidation protein products (AOPPs) for predicting non-recovered AKI and non-completely recovered AKI. AOPP levels increased significantly 7 days after surgery in patients with non-recovered or non-completely recovered AKI. Increased AOPP levels were associated with both types of poor recovery from AKI. Results from receiver-operating characteristic (ROC) curves demonstrated that AOPP levels had good prognostic value for predicting non-recovered and non-completely recovered AKI.

Microplastics in landfill and leachate: Occurrence, environmental behavior and removal strategies.

Plastic wastes buried in landfill are gradually broken and decomposed into microplastics under physical, chemical and biological effects, bringing environmental risks to the exploitation of waste resources. Landfill leachate as a potential source of environmental microplastics has not good attention. Microplastics in leachate carry toxic and harmful pollutants and antibiotic resistance genes, and these vectors pose greater risks to human and environmental health without systematic treatment. Recently, the main technologies of landfill leachate treatment process include order batch activated sludge process, membrane biological reaction process, flocculation process, combined filtration process, and constructed wetland process. However, there is still little knowledge about microplastic removal of the existing leachate treatment facilities, and some technologies to alleviate the sources of such microplastics should be timely developed. This paper systematically summarizes the occurrence of plastics, microplastics and nanoplastics in leachate and their interactive pollution with other toxic pollutants. Meanwhile, the prospects of their environmental behaviors in landfill and leachate are put forward. The microplastic removal by existing leachate treatment equipment and the limitations and challenges to upgrading process of development and implementation are also discussed. The paper can provide a scientific basis for studying the fate of microplastics in landfill and leachate.

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation.

Environmental pollution has drawn forth advanced materials and progressive techniques concentrating on sustainable development. Metal-organic frameworks (MOFs) have aroused vast interest resulting from their excellent property in structure and function. Conversely, powdery MOFs in highly crystalline follow with fragility, poor processability and recoverability. Aerogels distinguished by the unique three-dimensional (3D) interconnected pore structures with high porosity and accessible surface area are promising carriers for MOFs. Given these, combining MOFs with aerogels at molecule level to obtain advanced composites is excepted to further enhance their performance with higher practicability. Herein, we focus on the latest studies on the MOFs@aerogel composites. The construction of MOFs@aerogel with different synthetic routes and drying methods are discussed. To explore the connection between structure and performance, pore structure engineering and quantitation of MOFs content are outlined. Furthermore, various types of MOFs@aerogel composites and their carbonized derivatives are reviewed, as well as the applications of MOFs@aerogel for environmental remediation referring to water purification and air clearing. More importantly, outlooks towards these emerging advanced composites have been presented from the perspective of practical application and future development.