RESUMO
Chemiresistive-based metal oxide semiconductor (MOS) gas sensors are widely used in gas sensing due to their advantageous properties. Graphitic carbon nitride (g-C3N4) and metal oxide heterostructure materials can improve charge transport properties, selectivity, and sensitivity in MOS gas sensor materials. Herein, for the first time, CuO hollow polyhedral structures (HPSs) were synthesized via a hydrothermal technique and annealed at different temperatures, with the 400 °C annealed (CuO-400 HPSs) demonstrating remarkable sensing capabilities for diethylamine (DEA) gas at room temperature (RT). The x-g-C3N4 nanosheets were decorated with CuO HPSs in varying amounts (x = 0.8, 1.8, 2.1, and 3.1 wt %) and then annealed at 400 °C for x-g-C3N4-CuO-400 hollow polyhedral heterostructures (HPHSs). Indeed, among the synthesized samples, the 1.8%-g-C3N4-CuO-400 HPHSs have a higher sensitivity to DEA (resistance change in gas (Rg) and air (Ra); Rg/Ra= 65 @ 20 ppm), a low detection limit (Rg/Ra= 6 @ 500 ppb), wide dynamic response (Rg/Ra= 190 @ 80 ppm), strong stability (30 days), and 21.6 times higher sensitivity than pure CuO at RT toward 20 ppm of DEA. The exceptional gas-sensing behavior can be attributed to various factors, including controlled annealing conditions that result in the formation of well-defined structures and greater porosity, efficient charge transfer properties resulting from an optimized ratio of g-C3N4 to CuO in HPHSs, an abundance of defects, unsaturated Cu sites, and synergistic effects. The study presents a universal strategy for generating sensitive and selective g-C3N4-based composite materials for low-temperature gas sensors.
RESUMO
The development of luminol-dissolved O2 (luminol-DO) electrochemiluminescence (ECL) systems is crucial for real-world applications. Despite its stability and low biotoxicity, luminol-DO ECL systems struggle with low ECL performance due to their low reactivity. Investigating new materials like coreactant accelerators increases reactive oxygen species (ROS) formation and enhances luminol-DO ECL intensity. Motivated by the ROS-mediated ECL process, for the first time, we designed oxygen vacancy (OV)-rich high-entropy oxides (HEO) with five metal components [(FeCoNiCuZn)O] derived from metal-organic frameworks (MOFs) as coreaction accelerators to establish efficient luminol-DO ECL systems. High entropy (HE) MOFs were annealed at four different temperatures (600, 700, 800, and 900 °C). Indeed, the HE MOFs annealed at 800 °C (HEO-800) showed a 120-fold stronger ECL intensity compared to the bare glassy carbon electrode in the luminol-DO ECL system. The enhanced ECL performance can be attributed to the porous structure, unique morphology, heterostructures, high-density active sites, rich OV, unsaturated metals, and synergistic impact, which act as catalysts to accelerate the conversion of DO to ROS. The developed HEO-800-based luminol-DO ECL system can be effectively used for the high-sensitivity detection of mercury ions (Hg2+). The system detected Hg2+ over a wide concentration range from 0.1 nM to 100 µM, with a detection limit of 0.02 nM. The sensing mechanism relied on high-affinity metallophilic Hg2+-HEO-800 interactions, effectively quenching the ECL intensity of the luminol-DO/HEO-800 ECL system. The ECL sensing platform, developed without H2O2, offers a novel method for detecting substances, demonstrating significant potential for clinical diagnosis and biomarker analysis.
RESUMO
Chemiluminescence (CL)-based analytical methods utilize luminophores that need to be activated with an oxidizing agent to trigger CL emission. Despite its susceptibility to decomposition when exposed to external light or trace metals, hydrogen peroxide (H2O2) has been widely used to develop chemiluminescent methods due to the limited number of suitable alternatives for activating chemiluminescent luminophores. Also, analytical methods based on the well-known luminol/H2O2 CL system have low sensitivity. Dissolved oxygen (DO) is a naturally abundant and environmentally benign alternative oxidant for luminol and other CL luminophores. However, DO alone is inactive and needs an efficient catalyst or a coreaction accelerator for its activation. Because of the narrow bandgap of VS4 (ca. 1.12 eV), it can facilitate fast electron-transfer kinetics with an acceptor molecule such as DO. Here, we introduce vanadium tetrasulfide (VS4) to boost CL for the first time. Under the optimized conditions, VS4 nanodendrite catalyzes the generation of reactive oxygen species by activating DO which subsequently reacts with luminol to generate intense CL. It enhances the CL intensity of luminol/DO by about 10,000 times. Surprisingly, hemin remarkably quenches the generated CL of luminol/DO/VS4 nanodendrites, which is completely opposite to its typical enhancement of luminol CL. Based on the remarkable concentration-dependent quenching of the luminol/DO/VS4 nanodendrite CL by hemin, we have developed a sensitive CL method that can selectively detect hemin in the linear concentration range of 1-250 nM and achieved a limit of detection of 0.11 nM. The practical utility of the developed method was demonstrated by the determination of hemin in a pharmaceutical drug for the treatment of acute intermittent porphyria and in human serum. This study demonstrates that VS4 holds great promise in analytical method development.
RESUMO
The growing demand for highly active nanozymes in various fields has led to the development of several strategies to enhance their activity. Plasmonic enhancement, a strategy used in heterogenous catalysis, represents a promising strategy to boost the activity of nanozymes. Herein, Pd-Au heteromeric nanoparticles (Pd-Au dimers) with well-defined heterointerfaces have been explored as plasmonic nanozymes. As a model system, the Pd-Au dimers with integrated peroxidase (POD)-like activity and plasmonic activity are used to investigate the effect of plasmons on enhancing the activity of nanozymes under visible light irradiation. Mechanistic studies revealed that the generation of hot electron-hole pairs plays a dominant role in plasmonic effect, and it greatly enhances the decomposition of H2 O2 to the reactive oxygen species (ROS) intermediates (â¢OH, â¢O2 - and 1 O2 ), leading to elevated POD-like activity of the Pd-Au dimers. Finally, the Pd-Au dimers are applied in the plasmon-enhanced colorimetric method for the detection of alkaline phosphatase, exhibiting broad linear range and low detection limit. This study not only provides a straightforward approach for regulating nanozyme activity through plasmonic heterostructures but also sheds light on the mechanism of plasmon-enhanced catalysis of nanozymes.
Assuntos
Colorimetria , Nanopartículas , Colorimetria/métodos , Catálise , Espécies Reativas de OxigênioRESUMO
LiNO3 has attracted intensive attention as a promising electrolyte additive to regulate Li deposition behavior as it can form favorable Li3N, LiNxOy species to improve the interfacial stability. However, the inferior solubility in carbonate-based electrolyte restricts its application in high-voltage Li metal batteries. Herein, an artificial composite layer (referred to as PML) composed of LiNO3 and PMMA is rationally designed on Li surface. The PML layer serves as a reservoir for LiNO3 release gradually to the electrolyte during cycling, guaranteeing the stability of SEI layer for uniform Li deposition. The PMMA matrix not only links the nitrogen-containing species for uniform ionic conductivity but also can be coordinated with Li for rapid Li ions migration, resulting in homogenous Li-ion flux and dendrite-free morphology. As a result, stable and dendrite-free plating/stripping behaviors of Li metal anodes are achieved even at an ultrahigh current density of 20 mA cm-2 (>570 h) and large areal capacity of 10 mAh cm-2 (>1200 h). Moreover, the Li||LiFePO4 full cell using PML-Li anode undergoes stable cycling for 2000 cycles with high-capacity retention of 94.8%. This facile strategy will widen the potential application of LiNO3 in carbonate-based electrolyte for practical LMBs.
RESUMO
Heterodimers of metal nanocrystals (NCs) with tailored elemental distribution have emerged as promising candidates in the field of electrocatalysis, owing to their unique structures featuring heterogeneous interfaces with distinct components. Despite this, the rational synthesis of heterodimer NCs with similar elemental composition remains a formidable challenge, and their impact on electrocatalysis has remained largely elusive. In this study, Pd@Bi-PdBi heterodimer NCs are synthesized through an underpotential deposition (UPD)-directed growth pathway. In this pathway, the UPD of Bi promotes a Volmer-Weber growth mode, allowing for judicious modulation of core-satellite to heterodimer structures through careful control of supersaturation and growth kinetics. Significantly, the heterodimer NCs are employed in the electrocatalytic process of ethylene glycol (EG) with high activity and selectivity. Compared with pristine Pd octahedra and common PdBi alloy NC, the unique heterodimer structure of the Pd@Bi-PdBi heterodimer NCs endows them with the highest electrocatalytic performance of EG and the best selectivity (≈93%) in oxidizing EG to glycolic acid (GA). Taken together, this work not only heralds a new strategy for UPD-directed synthesis of bimetallic NCs, but also provides a new design paradigm for steering the selectivity of electrocatalysts.
RESUMO
Methyl acetate (MA) is a suitable solvent for low-temperature electrolyte solutions, but its poor stability against lithium metal is a big problem. Herein, a simple and cheap solution of LiPF6 dissolved in MA was successfully employed for Li4Ti5O12/graphite dual-ion batteries (DIBs). This cell has a long cycle life with 93.1% capacity retention after 1000 cycles. Moreover, it has superior performance at low temperatures (-40 °C) compared to other reported DIBs. The storage behavior of PF6- solvated by MA in graphite cathode has been investigated in detail by in situ X-ray diffraction (XRD) in combination with electrochemical dilatometry (ECD).
RESUMO
LiPF6 dissolved in dimethyl carbonate (DMC) is one of the cheapest groups of electrolyte solutions in dual-ion batteries. Generally, the discharge capacity of anion storage delivered by the graphite cathode grows with increasing LiPF6 concentration. This fact is consistent with the irreversible storage of DMC-solvated PF6-, and then, the underlying mechanism is clarified by the electrochemical tests and ex situ X-ray diffraction (XRD) measurements of graphite cathodes as well as infrared (IR) and Raman spectroscopy characterizations of solutions. Moreover, quaternary ammonium salts have facile dissociation, which can effectively regulate the solvation state of the anion and the interaction between ion pairs in the electrolyte. A small amount of tetrabutylammonium hexafluorophosphate (TBAPF6) is introduced into the highly concentrated LiPF6-DMC solution to improve the performance of the graphite cathode. The discharge capacity of the Li/graphite cell has increased by approximately 50%. This effect is also correlated with the solvation state of the anion. This study provides an insightful clue for the choice of electrolyte solution in dual-ion batteries.
RESUMO
In this study, the gas sensing properties of formaldehyde (HCHO) and benzene (C6H6) adsorbed on two-dimensional (2D) pristine GeSe and Pd-decorated GeSe (Pd-GeSe) monolayers are studied by using first-principles calculations. The adsorption energies, electronic properties, optical properties, sensitivity, and recovery time of the gas adsorption systems have been thoroughly investigated. It is found that the adsorption of C6H6 on two substrate surfaces and the adsorption of HCHO on pristine GeSe are examples of physical adsorption. However, after HCHO adsorption on the Pd-GeSe monolayer, the adsorption system exhibits an increased adsorption energy of -1.21 eV, which is more favorable compared with the other adsorption systems studied. Moreover, the electron localization function and charge transfer from Pd-GeSe to HCHO are significantly enhanced, indicating distinct chemical adsorption behavior. Furthermore, it demonstrates a larger band gap change rate of 18.8% and a significant enhancement of optical absorption upon the adsorption of HCHO on the Pd-GeSe monolayer. Additionally, the appropriate sensitivity and moderate recovery time for the adsorption of HCHO on the Pd-GeSe surface indicate that the Pd-GeSe monolayer possesses an outstanding sensing capability for HCHO gas.
RESUMO
Graphitic-phase carbon nitride (g-C3N4) materials have exhibited increasingly remarkable performance as emerging electrochemiluminescence (ECL) emitters, owing to their unique optical and electronic properties; however, the ECL merits of porous g-C3N4 nanofibers doped with ternary metals are not yet explored. Deciphering the ECL properties of trimetal-doped g-C3N4 nanofibers could provide an exquisite pathway for ultrasensitive sensing and imaging with impressive advantages of minimal background signal, great sensitivity, and durability. Herein, we rationally synthesized g-C3N4 nanofibers doped atomically with Mn, Fe, and Co elements (Mn/Fe/Co/g-C3N4) in a one-pot via the protonation in ethanol and annealing process driven by the rolling up mechanism. The ECL performance of g-C3N4 with and without metal dopants was investigated and compared with standard Ru(bpy)32+ in the presence of potassium persulfate (K2S2O8) as the coreactant. Notably, g-C3N4 nanofibers doped with metal ions exhibited an ECL efficiency of 483% that was 4.83 times higher than that of Ru(bpy)32+. Mechanistic investigations unveiled that the g-C3N4 nanofibers possess a large surface area and, as a result, exhibit a reduced interfacial impedance within the porous microstructure. These factors contribute to the acceleration of charge transfer rates and the stabilization of charge carriers and excitons, ultimately facilitating the ECL process. This research endeavor may pave the way for a new hot research area and serves as a powerful tool for elucidating fundamental inquiries of ECL on one-dimensional g-C3N4 nanostructures.
RESUMO
A straightforward hybrid approach of a blend cathode is put forward to alleviate self-discharged anion-graphite intercalation compounds in dual-ion batteries. The self-discharge mechanism of the LiNi0.5Mn1.5O4/graphite blend cathode is investigated by conventional electrochemical tests and in situ X-ray diffraction measurements. A charging behavior between electrode materials during self-discharge has been discovered. This work will contribute to advancing the practical implementation of dual-ion batteries and provide valuable theoretical support for the research of blend electrodes.
RESUMO
In recent years, the energy crisis has made the world realize the importance and need for green energy. Hydrogen safety has always been a primary issue that needs to be addressed for the application and large-scale commercialization of hydrogen energy, and precise and rapid hydrogen gas sensing technology and equipment are important prerequisites for ensuring hydrogen safety. Based on metal oxide semiconductors (MOS), resistive hydrogen gas sensors (HGS) offer advantages, such as low cost, low power consumption, and high sensitivity. They are also easy to test, integrate, and suitable for detecting low concentrations of hydrogen gas in ambient air. Therefore, they are considered one of the most promising HGS. This article provides a comprehensive review of the surface reaction mechanisms and recent research progress in optimizing the gas sensing performance of MOS-based resistive hydrogen gas sensors (MOS-R-HGS). Particularly, the advancements in metal-assisted or doped MOS, mixed metal oxide (MO)-MOS composites, MOS-carbon composites, and metal-organic framework-derived (MOF)-MOS composites are extensively summarized. Finally, the future research directions and possibilities in this field are discussed.
RESUMO
CO-stripping experiments are employed as a highly structure-sensitive and in situ strategy to explore the mechanisms of plasmon-enhanced electrooxidation reactions. By using Pt-Au heterodimers as a model catalyst, the plasmon-induced current and potential changes on Pt and Au sites can be identified and explained.
RESUMO
Solid-contact ion-selective electrodes (SC-ISEs) have the advantages of easy miniaturization, even chip integration, easy carrying, strong stability, and more favorable detection in complex environments. They have been widely used in conjunction with portable, wearable, and intelligent detection devices, as well as in on-site analysis and timely monitoring in the fields of environment, industry, and medicine. This article provides a comprehensive review of the composition of sensors based on redox capacitive and double-layer capacitive SC-ISEs, as well as the ion-electron transduction mechanisms in the solid-contact (SC) layer, particularly focusing on strategies proposed in the past three years (since 2021) for optimizing the performance of SC-ISEs. These strategies include the construction of ion-selective membranes, SC layer, and conductive substrates. Finally, the future research direction and possibilities in this field are discussed and prospected.
RESUMO
Surface roughness in chiral plasmonic nanostructures generates asymmetrical localized electromagnetic fields, which hold great promise for applications in chiral recognition, chiroptical spectroscopic sensing, and enantioselective photocatalysis. In this study, we develop a surface topographical engineering approach to precisely manipulate the surface structures of chiral Au nanocrystals. Through carefully controlling the amounts of l- or d-cystine (Cys) and the seed solution in the growth process, we successfully synthesize chiral Au nanocrystals with highly disordered, ordered, and less ordered wrinkled surfaces. An underlying principle governing the relationship between surface roughness, orderliness, and chiroptical response is also proposed. More importantly, the chiral ordered wrinkles on the surfaces of the nanocrystals generate asymmetrical localized electronic fields with enhanced intensity, which achieve excellent plasmon-enhanced chiral discrimination ability for penicillamine (Pen) enantiomers. This work offers exciting prospects for manipulating the surface structures of chiral nanocrystals and designing highly sensitive plasmon-enhanced enantioselective sensors with chiral hot spots.
RESUMO
In almost all electrochemical systems for electrochemiluminescence (ECL) analysis, electrodes are connected with an external power source, either directly or via wireless energy transfer circuit. That is inconvenient and makes some applications impossible. Herein, we both use galvanized iron with two different metals as both power source and electrodes to achieve a self-powered ECL and exploit ECL for the imaging of the corrosion of protective coating of widely used metal (e.g. galvanized iron) for the first time. The self-powered ECL enables the visualization of the deterioration of galvanic coating on iron using a smartphone and the detection of ascorbic acid with a linear range of 0.5-100 µM and a limit of detection of 0.31 µM. The devices based on self-powered approach do not require external power supply, thus effectively reducing their volume and cost. The self-powered ECL holds great promise for metal corrosion imaging and analytical applications.
RESUMO
Point-of-care testing plays a crucial role in diagnostics within resource-poor areas, necessitating the utilization of portable and user-friendly devices. The adaptation of biosensors for point-of-care applications requires careful considerations, such as miniaturization, cost-effectiveness, and streamlined sample processing. In recent years, the electrochemiluminescence (ECL) immunoassay has gained significant attention due to its visual detection capabilities and ability to facilitate high-throughput analysis. However, the development of a practical and cost-effective ECL device remains a challenging task. This study presents the development of an integrated MXene-modified single-electrode electrochemical system (SEES) for visual and high-throughput ECL immunoassays incorporating a Raspberry Pi system. The SEES was designed by affixing a plastic sticker with multiple perforations onto a single carbon ink screen-printed electrode, which operates based on a resistance-induced potential difference. Leveraging the excellent adsorption and bioaffinity properties of the carbon ink screen-printed electrode, effective immobilization of antibodies was achieved. Furthermore, the incorporation of Co-Pt nanoparticles enhanced the ECL intensity and electron transfer kinetics, enabling the sensitive detection of SARS-CoV-2. The developed system comprised 18 individual reaction cells, allowing for simultaneous analysis while maintaining sample isolation. Impressively, the system achieved a remarkable minimum virus detection limit of 10-14 g mL-1, accompanied by a high R2 value of 0.9798. These findings highlight the promising potential of our developed system for efficient point-of-care testing in resource-limited settings.
RESUMO
As an effective approach for materials synthesis, bipolar electrochemistry has been earning a renewed interest nowadays thanks to its unique features compared to conventional electrochemistry. Indeed, the wireless mode of electrode reactions and the generation of a gradient potential distribution above the bipolar electrode are among the most appealing qualities of bipolar electrochemistry. In particular, the gradient potential distribution is a highly attractive characteristic for the fabrication of surfaces with gradients in their chemical properties or molecular functionalities. Herein, we report the high-throughput electrosynthesis of gradient polypyrrole films by means of a new electrochemical cell design named the single-electrode electrochemical system (SEES). SEESs are made by attaching an inert plastic board with holes onto an indium tin oxide electrode, constructing multiple microelectrochemical cells on the same electrode. This type of arrangement enables parallel electrochemical reactions to be carried out simultaneously and controlled in a contactless manner by a single electrode. Several experimental conditions for polypyrrole film growth were extensively investigated. Furthermore, the gradient property of the polymer films was evaluated by thickness determination, surface morphology analysis, and contact angle measurements. The use of SEES has been demonstrated as a convenient and cost-effective strategy for high-throughput electrosynthesis and electroanalytical applications and has opened up a new door for gradient film preparation via a rapid condition screening process.
RESUMO
FeOOH nanorods, as one-dimensional nanomaterials, have been widely used in many fields due to their stable properties, low cost, and easy synthesis, but their application in the field of chemiluminescence (CL) is rarely reported. In this work, FeOOH nanorods were synthesized by a simple and environmentally friendly one-pot hydrothermal method and used for the first time as a catalyst for generating strong CL with luminol without additional oxidant. Remarkably, luminol-FeOOH exhibits about 250 times stronger CL than the luminol-H2O2 system. Its CL intensity was significantly quenched by uric acid. We established a simple, rapid, sensitive, and selective CL method for the detection of uric acid with a linear range of 20-1000 nM and a detection limit of 6.3 nM (S/N = 3). In addition, we successfully applied this method to the detection of uric acid in human serum, and the standard recoveries were 95.6-106.4%.
Assuntos
Luminol , Nanotubos , Humanos , Oxirredutases , Ácido Úrico , Peróxido de Hidrogênio , Luminescência , Medições Luminescentes/métodos , Limite de DetecçãoRESUMO
Environmental and health monitoring requires low-cost, high-performance diethylamine (DEA) sensors. Materials based on metal-organic frameworks (MOFs) can detect hazardous gases due to their large specific surface area, many metal sites, unsaturated sites, functional connectivity, and easy calcination to remove the scaffold. However, developing facile materials with high sensitivity and selectivity in harsh environments for accurate DEA detection at a low detection limit (LOD) at room temperature (RT) is challenging. In this study, p-type semiconducting porous CuOx sensing materials were synthesized using a simple solvothermal process and annealed in an argon atmosphere at three different temperatures (x = 400, 600, and 800 °C). Significant variations in particle size, specific area, crystallite size, and shape were noticed when the annealing temperature was elevated. Cu-MIL-53 annealed at 400 °C (CuO-400) has a typical nanoellipsoid (NEs) shape with a length of 61.5 nm and a diameter of 33.2 nm. Surprisingly, CuO-400 NEs showed an excellent response to DEA with an ultra-LOD (Rg/Ra = 7.3 @ 100 ppb, 55% relative humidity), excellent selectivity and sensitivity (Rg/Ra = 236 @ 15 ppm), exceptional long-term stability and repeatability, and a fast response/recovery period at RT, outperforming most previously reported materials. CuO-400 NEs have outstanding gas-sensing characteristics due to their high porosity, 1D nanostructure, unsaturated Cu sites (Cu+ and Cu2+), large specific surface area, and numerous oxygen vacancies. This study presents a generic approach to produce future CuO derived from Cu-MOFs-sensitive materials, revealing new insights into the design of effective sensors for environmental monitoring at RT.