Down-regulated HHLA2 enhances neoadjuvant immunotherapy efficacy in patients with non-small cell lung cancer (NSCLC) with chronic obstructive pulmonary disease (COPD).

BACKGROUND: Emerging data suggested a favorable outcome in advanced non-small cell lung cancer (NSCLC) with chronic obstructive pulmonary disease (COPD) patients treated by immunotherapy. The objective of this study was to investigate the effectiveness of neoadjuvant immunotherapy among NSCLC with COPD versus NSCLC without COPD and explore the potential mechanistic links. PATIENTS AND METHODS: Patients with NSCLC receiving neoadjuvant immunotherapy and surgery at Shanghai Pulmonary Hospital between November 2020 and January 2023 were reviewed. The assessment of neoadjuvant immunotherapy's effectiveness was conducted based on the major pathologic response (MPR). The gene expression profile was investigated by RNA sequencing data. Immune cell proportions were examined using flow cytometry. The association between gene expression, immune cells, and pathologic response was validated by immunohistochemistry and single-cell data. RESULTS: A total of 230 NSCLC patients who received neoadjuvant immunotherapy were analyzed, including 60 (26.1%) with COPD. Multivariate logistic regression demonstrated that COPD was a predictor for MPR after neoadjuvant immunotherapy [odds ratio (OR), 2.490; 95% confidence interval (CI), 1.295-4.912; P = 0.007]. NSCLC with COPD showed a down-regulation of HERV-H LTR-associating protein 2 (HHLA2), which was an immune checkpoint molecule, and the HHLA2low group demonstrated the enrichment of CD8+CD103+ tissue-resident memory T cells (TRM) compared to the HHLA2high group (11.9% vs. 4.2%, P = 0.013). Single-cell analysis revealed TRM enrichment in the MPR group. Similarly, NSCLC with COPD exhibited a higher proportion of CD8+CD103+TRM compared to NSCLC without COPD (11.9% vs. 4.6%, P = 0.040). CONCLUSIONS: The study identified NSCLC with COPD as a favorable lung cancer type for neoadjuvant immunotherapy, offering a new perspective on the multimodality treatment of this patient population. Down-regulated HHLA2 in NSCLC with COPD might improve the MPR rate to neoadjuvant immunotherapy owing to the enrichment of CD8+CD103+TRM. TRIAL REGISTRATION: Approval for the collection and utilization of clinical samples was granted by the Ethics Committee of Shanghai Pulmonary Hospital (Approval number: K23-228).

Effects of different slaughtering methods on the energy metabolism, apoptosis process and quality of grouper (Epinephelus fuscoguttatus) during cold storage at 4 °C.

BACKGROUND: The aquatic processing industry is increasingly aware of the need to ensure that slaughtering is carried out under high welfare standards, so there is a need to explore the impact of slaughter methods on fish fillets. This study aimed to investigate the effects of different slaughtering methods (M1, lethality by hammering; M2, gas mixture causing death; M3, lethality by clove oil anesthesia + ice slurry; M4, lethality by ice slurry; M5, lethality by gradient cooling) on the energy metabolism, apoptosis and flesh mass in grouper (Epinephelus fuscoguttatus). RESULTS: Therefore, 120 fish (24 per treatment) were slaughtered by the five methods. The results showed that the succinate dehydrogenase (SDH) enzyme activity of M5 sample was higher. The serum glucose level of M2 samples and DAPI staining fluorescence of M2 samples were the highest, indicating that the stress response of M2 was strong. In addition, the texture, pH, total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA) and K value results showed M5 samples had better flesh quality. CONCLUSION: Gradient cooling lethality had the least effect on oxidative damage and apoptosis in grouper during cold storage as the gradient cooling lethality had the least effect on antioxidant enzyme activities. © 2024 Society of Chemical Industry.

Shape-Regulated Photothermal-Catalytic Tumor Therapy Using Polydopamine@Pt Nanozymes with the Elicitation of an Immune Response.

Recently, nanozyme-based photothermal-catalytic therapy has emerged as a promising strategy for antitumor treatment. Extensive research has focused on optimizing the catalytic activity and photothermal conversion performance of nanozymes through size, morphology, and surface property regulations. However, the biological effects of nanozymes, such as cellular uptake and cytotoxicity, resulting from their physicochemical properties, remain largely unexplored. In this study, two types of polydopamine/platinum (PDA@Pt) nanozymes, flower-like (FPDA@Pt) and mesoporous spherical-like (MPDA@Pt), to comprehensively compare their enzyme-mimicking activity, photothermal conversion capacity, and antitumor efficiency are designed. These findings revealed that FPDA@Pt exhibited superior peroxidase-like activity and higher photothermal conversion efficiency compared to MPDA@Pt. This led to enhanced production of reactive oxygen species (ROS) and increased heat generation at tumor sites. Importantly, it is observed thatthe flower-like structure of FPDA@Pt facilitated enhanced cellular uptake, leading to an increased accumulation of nanozymes within tumor cells. Furthermore, the light irradiation on tumors also triggered a series of anti-tumor immune responses, further enhancing the therapeutic efficacy. This work provides a possible design orientation for nanozyme-based photothermal-catalytic tumor therapy, highlighting the importance of considering the physicochemical properties of nanozymes to optimize their therapeutic potential in antitumor strategies.

A Micro-Topography Measurement and Compensation Method for the Key Component Surface Based on White-Light Interferometry.

The grinding grooves of material removal machining and the residues of a machining tool on the key component surface cause surface stress concentration. Thus, it is critical to carry out precise measurements on the key component surface to evaluate the stress concentration. Based on white-light interferometry (WLI), we studied the measurement distortion caused by the reflected light from the steep side of the grinding groove being unable to return to the optical system for imaging. A threshold value was set to eliminate the distorted measurement points, and the cubic spline algorithm was used to interpolate the eliminated points for compensation. The compensation result agrees well with the atomic force microscope (AFM) measurement result. However, for residues on the surface, a practical method was established to obtain a microscopic 3D micro-topography point cloud and a super-depth-of-field fusion image simultaneously. Afterward, the semantic segmentation network U-net was adopted to identify the residues in the super-depth-of-field fusion image and achieved a recognition accuracy of 91.06% for residual identification. Residual feature information, including height, position, and size, was obtained by integrating the information from point clouds and super-depth-of-field fusion images. This work can provide foundational data to study surface stress concentration.

Metal ions/nucleotide coordinated nanoparticles comprehensively suppress tumor by synergizing ferroptosis with energy metabolism interference.

BACKGROUND: Ferroptosis holds promise as a potential tumor therapy by programming cell death with a hallmark of reactive oxygen species (ROS)-induced lipid peroxidation. However, vigorous energy metabolism may assist tumors to resist oxidative damage and thus weaken the effects of ferroptosis in tumor treatment. RESULTS: Herein, a bifunctional antitumor platform was constructed via coordinated interactions between metal ions and nucleotides to synergistically activate ferroptosis and interrupt energy metabolism for tumor therapy. The designed nanoparticles were composed of Fe2+/small interfering RNA (siRNA) as the core and polydopamine as the cloak, which responded to the tumor microenvironment with structural dissociation, thereby permitting tumor-specific Fe2+ and siRNA release. The over-loaded Fe2+ ions in the tumor cells then triggered ferroptosis, with hallmarks of lipid peroxidation and cellular glutathione peroxidase 4 (GPX4) down-regulation. Simultaneously, the released siRNA targeted and down-regulated glyceraldehyde-3-phosphate dehydrogenase (GAPDH) expression in the tumor to inhibit glycolytic pathway, which interfered with tumor energy metabolism and enhanced Fe2+-induced ferroptosis to kill tumor cells. CONCLUSIONS: This study presents a concise fabrication of a metal ion/nucleotide-based platform to integrate ferroptosis and energy metabolism intervention in one vehicle, thereby providing a promising combination modality for anticancer therapy.

Ultrasmall FeS2 Nanoparticles-Decorated Carbon Spheres with Laser-Mediated Ferrous Ion Release for Antibacterial Therapy.

Recent progress in nanotechnology and the ancient use of sulfur in treating dermatological disorders have promoted the development of nano-sulfides for antimicrobial applications. However, the variable valences and abundant forms of nano-sulfides have complicated investigations on their antibacterial activity. Here, carbon nanospheres (CNSs) with decoration of ultrasmall FeS2 nanoparticles (CNSs@FeS2 ) is synthesized, and their antibacterial ability and mechanism are explored. The CNSs@FeS2 released Fe2+ and sulfur ions simultaneously through dissolution and disproportionation. In vitro study indicated that the released Fe2+ killed bacteria by increasing the oxidative state of bacterial surfaces and intracellular molecules. Importantly, the released sulfur exhibited a protective effect on Fe2+ , ensuring the stable existence of Fe2+ to continuously combat bacteria. Moreover, the carbon shells of CNSs@FeS2 not only prevented the aggregation of FeS2 but also accelerated the release of Fe2+ through photothermal effects to achieve synergistic hyperthermia/Fe2+ therapy. In vivo experiments indicated that treatment with CNSs@FeS2 resulted in a marked reduction in bacterial number and improvement in survival in an acute peritonitis mouse model, and antibacterial wound experiments demonstrated high efficacy of CNSs@FeS2 -enabled synergistic hyperthermia/Fe2+ therapy. Thus, this study clarifies the antibacterial mechanism of FeS2 and offers a synergetic therapeutic platform with laser-mediated Fe2+ release for antibacterial applications.

Non-uniformity calibration method of space-borne area CCD for directional polarimetric camera.

The directional polarimetric camera (DPC) is a polarization sensor with the characteristics of ultra-wide-angle and low-distortion imaging. The multi-angle polarization information is helpful to obtain the spatial distribution of target radiation, and multiple data fusion relies on the non-uniformity calibration of image plane. The non-uniformity consists of many factors such as lens, detector assembly, spatial stray light, etc. The single correction method can not distinguish the error source effectively. In consideration of the in-flight operation mode of DPC based on the adjustment of exposure time, the non-uniformity correction method of the detector based on multi parameters is proposed. Through the electro-optical performance measurement system of the CCD detector, the sensitive factors such as temperature, dark current, exposure time and spectral response are obtained. After a series of preprocessing of the image including removal of dark signal, removal of smearing effect and temperature compensation, the non-uniformity calibration based on multi-parameters is imposed on the detector. The low-frequency unbalanced response difference of the image surface is eliminated, and the high-frequency difference is effectively suppressed. The experimental results show that the photo response non-uniformity of 95% full well single frame data is reduced from 2.86% to 0.36%. After correction, the data noise is shown as shot noise, and the detector has good ability of dynamic range adjustment. The non-uniformity calibration by the proposed method can offer data support for the instrumental calibration and in-flight fast calculation, and provide effective reference for the subsequent polarization remote sensing instruments.

Lubrication and Dynamically Controlled Drug Release Properties of Tween 85/Tween 80/H2O Lamellar Liquid Crystals.

Lamellar liquid crystals have amazing lubricating and drug-solubilizing properties. Hence, the combination of drug molecules with lamellar liquid crystals is expected to be used in joint lubrication and treatment. In this study, the partial phase diagram of the Tween 85/Tween 80/H2O three-component system was determined. The phase structure of the system changed from a hexagonal liquid crystal to a lamellar liquid crystal with the increase of Tween 85 content. The lamellar liquid crystals showed superior lubricating properties due to their unique lamellar structure. Furthermore, the model of drug release during friction was established for the first time. It was found that the order of the lamellar liquid crystals increased with the increase of the mass ratio of Tween 85/Tween 80, leading to the decrease of the ibuprofen release rate. In addition, the release rate of ibuprofen increased progressively with the increase of the friction frequency, but the load had little effect on it. Therefore, the lamellar liquid crystals consisting of nonionic surfactants with good biocompatibility have potential application prospects for joint lubrication and treatment of arthritis.

N-, P-, and O-Tridoped Carbon Hollow Nanospheres with Openings in the Shell Surfaces: A Highly Efficient Electrocatalyst toward the ORR.

Recently, carbon nanomaterials doped with nonmetallic atoms have been used as electrocatalysts involved in oxygen reduction reactions (ORRs) because of the lack of degradation and contamination problems caused by metal dissolution, low cost, sustainability, and multifunctionality. In this study, the metal-free N-, P-, O-tridoped carbon hollow nanospheres (N, P, O-Carbon) with openings in the shell surfaces have been developed, where poly(o-phenylenediamine) hollow nanospheres with openings in the shell surfaces were chosen as a nitrogen-rich polymer, and then different phosphorus sources (such as NaH2PO2, H3PO4, and phytic acid (PA)) were introduced for heat treatment. When used as electrocatalysts, N, P, O-Carbon-PA showed the best ORR electroactivity with an onset potential (Eonset) of 0.98 V and the limit current density of 5.39 mA cm-2. The origin of high activity associated with heteroatom doping was elucidated by X-ray photoelectron spectroscopy and density functional theory. The results evidenced the high potential of N, P, O-Carbon as highly active nonmetal ORR electrocatalysts. It can be expected that the conclusions rendered herein will provide guidance for the reasonable design of other heteroatom-doped carbon for wider applications.

Benzoate ester as a new species for supramolecular chiral assembly.

In this work, a benzoate ester molecule, dodecamethylnonacosane-2,28-diyl dibenzoate (DMNDB), has been discovered as a new species that aggregates into chiral nano-assemblies. In the tetrahydrofuran (THF)/water system, the benzoate ester, DMNDB, could self-assemble into left-handed twisted nanowires, and the most suitable THF/water volume ratio to obtain uniform twisted nanowires was 3 : 7. The driving forces of assembly and the molecular packing type in assemblies for the twisted nanowires were explored, and a possible assembly mechanism was proposed to understand the generation of chiral assemblies. Interestingly, the left-handed nanowires could cross-link and immobilize the solvent in the isopropanol (iPrOH)/water (2 : 8) system to form chiral gels. When the iPrOH/water ratio was increased to 6 : 4, the left-handed nanowires as structural units were found to evolve to right-handed nanofibers. Accordingly, the intermolecular interactions and the molecular packing type also changed with the solvent ratio. What is more, the xerogel could be obtained by drying the gel and left-handed twisted nanowires could form in the THF/water system again, showing the recyclability of chiral nanoassemblies. Also, these DMNDB chiral nanostructures exhibited potential for application in enantioselective separation by co-assembling with tetra-aniline.

Heterologous expression of AHL lactonase AiiK by Lactobacillus casei MCJΔ1 with great quorum quenching ability against Aeromonas hydrophila AH-1 and AH-4.

BACKGROUND: Nowadays, microbial infections have caused increasing economic losses in aquaculture industry and deteriorated worldwide environments. Many of these infections are caused by opportunistic pathogens through cell-density mediated quorum sensing (QS). The disruption of QS, known as quorum quenching (QQ), is an effective and promising way to prevent and control pathogens, driving it be the potential bio-control agents. In our previous studies, AHL lactonase AiiK was identified with many characteristics, and constitutive expression vector pELX1 was constructed to express heterologous proteins in Lactobacillus casei MCJΔ1 (L. casei MCJΔ1). In this study, recombinant strain pELCW-aiiK/L. casei MCJΔ1 (LcAiiK) and wild-type Aeromonas hydrophila (A. hydrophila) were co-cultured to test the QQ ability of LcAiiK against A. hydrophila. RESULTS: A cell wall-associated expression vector pELCW for L. casei MCJΔ1 was constructed. Localization assays revealed that the expressed AiiK was anchored at the surface layer of LcAiiK via vector pELCW-aiiK. LcAiiK (OD600 = 0.5) degraded 24.13 µM of C6-HSL at 2 h, 40.99 µM of C6-HSL at 12 h, and 46.63 µM of C6-HSL at 24 h. Over 50% LcAiiK cells maintained the pELCW-aiiK plasmid after 15 generations of cultivation without erythromycin. Furthermore, LcAiiK inhibited the swimming motility, extracellular proteolytic activity, haemolytic activity and biofilm formation of A. hydrophila AH-1 and AH-4. CONCLUSION: The AHL lactonase AiiK is firstly and constitutively expressed at the surface layer of L. casei MCJΔ1. LcAiiK displayed considerable AHL lactonase activity and great QQ abilities against A. hydrophila AH-1 and AH-4 by attenuating their QS processes instead of killing them. Therefore, the LcAiiK can be exploited as an anti-pathogenic drug or a bio-control agent to control the AHL-mediated QS of pathogenic bacteria.

Expression and Diagnostic Value of lncRNA BLACAT1 in Peripheral Blood of Patients with Acute Myeloid Leukemia.

BACKGROUND: The current study aims to investigate the expression of lncRNA BLACAT1 in patients with acute myeloid leukemia (AML) and to analyze its correlation with clinical prognosis. METHODS: Peripheral blood samples were collected from 68 AML patients, including 48 patients with acute myeloid leukemia (AML), 20 patients with complete response (CR), and 30 patients with iron deficiency anemia (control group). LncRNA BLACAT1 was detected by real-time fluorescence quantitative PCR (qRT-PCR). The expression of BLACAT1 and its relationship with clinicopathological characteristics and prognosis were analyzed. RESULTS: The expression of lncRNA BLACAT1 in AML patients was significantly higher than that in complete remission patients and iron deficiency anemia patients, but the expression of lncRNA BLACAT1 in AML-CR group and control group had no significant difference. Further study showed that the expression of lncRNA BLACAT1 was correlated with the National Comprehensive Cancer Network (NCCN) risk classification, the amount of platelet and bone marrow primordial cells (%), and survival status of patients. The median overall survival time of patients with high expression of lncRNA BLACAT1 was significantly shorter than those with low expression of lncRNA BLACAT1 (p < 0.05). CONCLUSIONS: LncRNA BLACAT1 was involved in regulating the occurrence and development of AML and can be used as a potential prognostic marker and therapeutic target for AML patients.

Copper/Carbon Hybrid Nanozyme: Tuning Catalytic Activity by the Copper State for Antibacterial Therapy.

Metal-carbon hybrid materials have shown promise as potential enzyme mimetics for antibacterial therapy; however, the effects of metal states and corresponding antibacterial mechanisms are largely unknown. Here, two kinds of copper/carbon nanozymes were designed, with tuned copper states from Cu0 to Cu2+. Results revealed that the copper/carbon nanozymes exhibited copper state-dependent peroxidase-, catalase-, and superoxide dismutase-like activities. Furthermore, the antibacterial activities were also primarily determined by the copper state. The different antibacterial mechanisms of these two copper/carbon nanozymes were also proposed. For the CuO-modified copper/carbon nanozymes, the released Cu2+ caused membrane damage, lipid peroxidation, and DNA degradation of Gram-negative bacteria, whereas, for Cu-modified copper/carbon nanozymes, the generation of reactive oxygen species (ROS) via peroxidase-like catalytic reactions was the determining factor against both Gram-positive and Gram-negative bacteria. Lastly, we established two bacterially infected animal models, i.e., bacteria-infected enteritis and wound healing, to confirm the antibacterial ability of the copper/carbon nanozymes. Our findings provide a deeper understanding of metal state-dependent enzyme-like and antibacterial activities and highlight a new approach for designing novel and selective antibacterial therapies based on metal-carbon nanozymes.

An integrative analysis of the transcriptome and proteome of the pulp of a spontaneous late-ripening sweet orange mutant and its wild type improves our understanding of fruit ripening in citrus.

Fruit ripening is a complex, genetically programmed process that occurs in conjunction with the differentiation of chloroplasts into chromoplasts and involves changes to the organoleptic properties of the fruit. In this study, an integrative analysis of the transcriptome and proteome was performed to identify important regulators and pathways involved in fruit ripening in a spontaneous late-ripening mutant ('Fengwan' orange, Citrus sinensis L. Osbeck) and its wild type ('Fengjie 72-1'). At the transcript level, 628 genes showed a 2-fold or more expression difference between the mutant and wild type as detected by an RNA sequencing approach. At the protein level, 130 proteins differed by 1.5-fold or more in their relative abundance, as indicated by iTRAQ (isobaric tags for relative and absolute quantitation) analysis. A comparison of the transcriptome and proteome data revealed some aspects of the regulation of metabolism during orange fruit ripening. First, a large number of differential genes were found to belong to the plant hormone pathways and cell-wall-related metabolism. Secondly, we noted a correlation between ripening-associated transcripts and sugar metabolites, which suggests the importance of these metabolic pathways during fruit ripening. Thirdly, a number of genes showed inconsistency between the transcript and protein level, which is indicative of post-transcriptional events. These results reveal multiple ripening-associated events during citrus ripening and provide new insights into the molecular mechanisms underlying citrus ripening regulatory networks.

Fly-Cutting Processing of Micro-Triangular Pyramid Arrays and Synchronous Micro-Scrap Removal.

Many micro-scraps are generated when a micro-triangular pyramid array (MTPA) is machined by the fly-cutting method. Micro-scraps are generally not removed quickly enough; therefore, these residual micro-scraps participate in the cutting process again, scratching the workpiece surface and accelerating diamond tool wear. To remove micro-scraps rapidly, a fly-cutting method to produce MTPAs on vertically oriented working surfaces was developed during this study. The results show that an MTPA produced by fly cutting on a vertical workpiece had a clearly outlined structure, high dimensional accuracy, and a low surface roughness. There was no micro-scrap residue on the workpiece surface and the diamond tool wear was small. The cutting inlet edges had no burrs, and the cutting outlet edges had only a small number of burrs. This method of fly cutting MTPAs on vertically oriented working surfaces provides a foundation for the development of high-precision micro-triangular pyramid optical elements.

Longitudinal Ultrasonic Vibration-Assisted Planing Method for Processing Micro-Pyramid Arrays.

Micro-pyramid copper molds are critical components in the preparation of high-precision optical elements, such as light-trapping films and reflective films. Their surfaces are composed of micro-pyramid arrays (MPAs). The surface roughness and edge burrs of MPAs seriously affect the optical properties of optical elements. To reduce the surface roughness, as well as the sizes of the edge burrs, the longitudinal ultrasonic vibration-assisted planing (LUVP) method for processing MPAs was developed during this study. In addition, an experiment was conducted to compare the precision planing and LUVP methods of MPA generation. The results show that the tool nose amplitude of the LUVP experimental platform constructed during this study was 3.3 µm, and that the operating frequency was 19.85 kHz. An MPA processed by LUVP had a smaller surface roughness than that of an MPA produced by precision planing; it also had fewer and smaller edge burrs, and there was slightly less diamond tool wear. The MPA cut using the LUVP method had no corrugation on its surface. This research lays a foundation for developing higher-precision micro-pyramid plastic films.

Alkylation Triggered an Acylation of Arenes with a Highly Electrophilic Acylphosphonium Salt.

Friedel-Crafts acylation is usually promoted by Lewis acids or Brønsted acids. In this work, a novel acylation of arenes with a highly electrophilic acylphosphonium salt was developed. The alkylation of the phosphorus atom in acylphosphines generated a neutral trivalent phosphine as a good leaving group and triggered the high electrophilicity of the acylphosphonium salt. Using acylphosphonium salts, 38 examples of acylations of arenes, alcohols, phenol, amines, thioalcohols, and even polystyrene were achieved. The acylation of arenes was monitored by 31P nuclear magnetic resonance and disclosed the existence of an acylphosphonium intermediate. The electrophilic capability of the acylphosphonium salt was ranked by the following series of controlled reactions: AcPR+ ≈ AcOTf > AcI > AcCl.

Effect of magnetic nano-particles combined with multi-frequency ultrasound-assisted thawing on the quality and myofibrillar protein-related properties of salmon (Salmo salar).

Multi-frequency ultrasound-assisted thawing (MUAT) has been proven to be an effective method of maintaining the quality of frozen food. The effects of magnetic nano-particles (MNPs) combined with MUAT and multi-frequency ultrasound-assisted sequential thawing (MUST) on water retention, myofibrillar protein (MP) structural characteristics, function characteristics, and MP aggregation and degradation of salmon (Salmo salar) were studied. The results showed that MNPs combined with multi-frequency ultrasound-assisted sequential thawing (MNPs-MUST) significantly improved the thawing rate and the retention of water and had better emulsifying and foaming properties. MNPs-MUST treatment reduced the oxidation and degradation of MP, increased sulfhydryl content, and protected the structure of MP. Confocal laser scanning microscopy (CLSM) indicated that the MP transformed into a filamentous polymer into more evenly distributed units, resulting in higher protein solubility, lower surface hydrophobicity, and lower protein turbidity. Therefore, MNPs combined with MUST has a potential application value in the thawing research of frozen salmon.

Study of cracks in the last-stage rotor blade of a steam turbine and the corrosion fatigue properties of its materials.

In this study, to clarify the failure mechanism of the last-stage rotor blade in the low-pressure cylinder of a steam turbine, the peculiarities of crack initiation and propagation on the inlet side of the last-stage rotor blade at a distance of 125-165 mm were analyzed, along with the corrosion fatigue properties of its materials. The results showed that crack initiation occurred at the tip of the pit due to a combination of factors: stress concentration at the tip of the pit, corrosion of the Cr-poor area near the prior austenite grain boundary, centrifugal tensile stress, and steam bending stress. The crack propagation could be divided into the initial intergranular and late transgranular propagation stages. The main reason for the initial intergranular propagation was stress corrosion, and the main reason for the later transgranular propagation was corrosion fatigue. High-frequency induction quenching technology can improve the microhardness of the blade's surface material and enhance the blade's resistance to water erosion, but it may also reduce the corrosion fatigue resistance of the blade material. The rotary bending corrosion fatigue test can effectively simulate the crack propagation process of the blade. These results are of great significance for the safe operation of the last-stage rotor blade in the low-pressure cylinder of a steam turbine.