Review on Layered Manganese-Based Metal Oxides Cathode Materials for Potassium-Ion Batteries: From Preparation to Modification.

Potassium-ion battery is rich in resources and cheap in price, in the era of lithium-ion battery commercialization, potassium-ion battery is the most likely to replace it. Based on the classification and summary of electrode materials for potassium-ion batteries, this paper focuses on the introduction of manganese-based oxide KxMnO2. The layered KxMnO2 has a large layer spacing and can be embedded with large size potassium-ions. This paper focuses on the preparation and doping of manganese-based cathode materials for potassium-ion batteries, summarizes the main challenges of KxMnO2-based cathode materials in the current stage of research and further looks into its future development direction.

Rational Design of Yolk-Shell ZnCoSe@N-Doped Dual Carbon Architectures as Long-Life and High-Rate Anodes for Half/Full Na-Ion Batteries.

Transition-metal selenides (TMSs) have emerged as prospective anode materials for sodium ion batteries (SIBs), owing to their considerable theoretical capacity and intrinsic high electronic conductivity. Whereas, TMSs still suffer from poor rate capability and inferior cycling stability induced by sluggish kinetics and severe volume changes during de/sodiation processes. Herein, a hierarchical composite consisting of a zinc-cobalt bimetallic selenide yolk and nitrogen-doped double carbon shell (denoted as ZnCoSe@NDC) is engineered and fabricated successfully. The architecture of the as-fabricated material improves the Na-ion storage performance via increasing the electron transfer kinetics, accommodating volume expansion, and mitigating the generation of by-products. As expected, the ZnCoSe@NDC electrode delivers superior sodium storage performance with long cycling stability (344.5 mAh g-1 at 5.0 A g-1 over 2000 long-term cycles) and high-rate performance (319.2 mAh g-1 at 10.0 A g-1 ). Meanwhile, the NVP@C//ZnCoSe@NDC full SIB cells are constructed successfully, retaining 96.3% of its initial capacity at 0.5A g-1 after 200 loops. The outstanding electrochemical performance and the construction of hybrid SIBs will have far-reaching influences on the development of the various rechargeable batteries.

Ingeniously Designed Yolk-Shell-Structured FeSe2@NDC Nanoboxes as an Excellent Long-Life and High-Rate Anode for Half/Full Na-Ion Batteries.

Thanks to their high conductivity and theoretical capacity, transition metal selenides have demanded significant research attention as prospective anodes for sodium-ion batteries. Nevertheless, their practical applications are hindered by finite cycle life and inferior rate performance because of large volume expansion, polyselenide dissolution, and sluggish dynamics. Herein, the nitrogen-doped carbon (NC)-coated FeSe2 nanoparticles encapsulated in NC nanoboxes (termed FeSe2@NDC NBs) are fabricated through the facile thermal selenization of polydopamine-wrapped Prussian blue precursors. In this composite, the existing nitrogen-doped dual carbon layer improves the intrinsic conductivity and structural integrity, while the unique porous yolk-shell architecture significantly mitigates the volume swelling during the sodium/desodium process. Moreover, the derived Fe-N-C bonds can effectively capture polyselenide, as well as promote Na+ transportation and good reversible conversion reaction. As expected, the FeSe2@NDC NBs deliver remarkable rate performance (374.9 mA h g-1 at 10.0 A g-1) and long-cycling stability (403.3 mA h g-1 over 2000 loops at 5.0 A g-1). When further coupled with a self-made Na3V2(PO4)3@C cathode in sodium-ion full cells, FeSe2@NDC NBs also exhibit considerably high and stable sodium-storage performance.

Asymmetric, Flexible Supercapacitor Based on Fe-Co Alloy@Sulfide with High Energy and Power Density.

Electrode materials with high conductivities that are compatible with flexible substrates are important for preparing high-capacitance electrode materials and improving the energy density of flexible supercapacitors. Here, we report the design and fabrication of a new type of flexible electrode based on nanosheet architectures of a Co-Fe alloy (FeCo-A) coated with ternary metal sulfide composites (FeCo-Ss) on silver-sputtered carbon cloth. The high conductivity of the flexible substrate and the iron-cobalt alloy skeleton enables good electron transmission through the material. In particular, the outer FeCo-S layer has an average thickness of ∼30 nm, providing many active sites. This layer also inhibits the oxidation of the alloy. The electrode material is close to 20 nm thick, which limits inaccessible volumes and promotes high utilization of FeCo-alloy@FeCo-sulfide (FeCo-A-S). The additive-free FeCo-A-S electrode has a high specific capacitance of 2932.2 F g-1 at 1.0 A g-1 and a superior rate capability. All-solid-state supercapacitors based on these electrodes have a high power density of 8000 W kg-1 and a high energy density of 46.1 W h kg-1.

Improving the electrochemical performance of layered cathode oxide for sodium-ion batteries by optimizing the titanium content.

P2-type transition metal oxides are promising cathode materials for sodium-ion batteries. However, due to irreversible phase transition, these batteries exhibit low capacity and poor cycling stability. In this study, highly dense, spherical P2-type oxides Na0.67[Ni0.167Co0.167Mn0.67]1-xTixO2 (0 ≤ x ≤ 0.4) are synthesized by calcining a mixture of Na2CO3, spherical ternary precursor powder Ni0.167Co0.167Mn0.67O2, and different amounts of nanoscale TiO2. High-temperature X-ray diffraction results obtained during calcination reveal 850 °C as the optimum calcination temperature. All materials exhibit high crystallinity without any impurity phases. The initial reversible capacities of the as-prepared samples decrease with increasing Ti substitution; however, these samples attain better cycling stability. When x = 0.2, the sample delivers an initial discharge capacity of 138 mAh g-1 at 20 mA g-1 between 2 and 4.5 V. Even at 100 mA g-1, the sample delivers 101 mAh g-1 reversible capacity in the first cycle with capacity retention of 89.4% after 300 cycles. Moreover, the material shows sloping potential profiles, with the average voltages reaching up to ∼3.8 V. The ex-situ X-ray diffraction (XRD) results of the samples after cycling demonstrate that Ti substitution improves the structural stability. In general, Ti substitution is an effective approach for improving the electrochemical performance of ternary P2-type oxide Na0.67Ni0.167Co0.167Mn0.67O2.