Green Extraction of Reed Lignin: The Effect of the Deep Eutectic Solvent Composition on the UV-Shielding and Antioxidant Properties of Lignin.

Lignin, the second most abundant natural polymer, is a by-product of the biorefinery and pulp and paper industries. This study was undertaken to evaluate the properties and estimate the prospects of using lignin as a by-product of the pretreatment of common reed straw (Phragmites australis) with deep eutectic solvents (DESs) of various compositions: choline chloride/oxalic acid (ChCl/OA), choline chloride/lactic acid (ChCl/LA), and choline chloride/monoethanol amine (ChCl/EA). The lignin samples, hereinafter referred to as Lig-OA, Lig-LA, and Lig-EA, were obtained as by-products after optimizing the conditions of reed straw pretreatment with DESs in order to improve the efficiency of subsequent enzymatic hydrolysis. The lignin was studied using gel penetration chromatography, UV-vis, ATR-FTIR, and 1H and 13C NMR spectroscopy; its antioxidant activity was assessed, and the UV-shielding properties of lignin/polyvinyl alcohol composite films were estimated. The DES composition had a significant impact on the structure and properties of the extracted lignin. The lignin's ability to scavenge ABTS+• and DPPH• radicals, as well as the efficiency of UV radiation shielding, decreased as follows: Lig-OA > Lig-LA > Lig-EA. The PVA/Lig-OA and PVA/Lig-LA films with a lignin content of 4% of the weight of PVA block UV radiation in the UVA range by 96% and 87%, respectively, and completely block UV radiation in the UVB range.

Deep Eutectic Solvents for Biotechnology Applications.

Deep eutectic solvents (DESs) are an alternative to traditional organic solvents and ionic liquids and meet the requirements of "green" chemistry. They are easy to prepare using low-cost constituents, are non-toxic and biodegradable. The review analyzes literature on the use of DES in various fields of biotechnology, provides data on the types of DESs, methods for their preparation, and properties. The main areas of using DESs in biotechnology include extraction of physiologically active substances from natural resources, pretreatment of lignocellulosic biomass to improve enzymatic hydrolysis of cellulose, production of bioplastics, as well as a reaction medium for biocatalytic reactions. The aim of this review is to summarize available information on the use of new solvents for biotechnological purposes.

Peculiar Properties of Template-Assisted Aniline Polymerization in a Buffer Solution Using Laccase and a Laccase-Mediator System as Compared with Chemical Polymerization.

The conventional chemical polymerization of aniline has been described in multiple publications, while enzymatic polymerization has been poorly explored. A comparative study of the template-assisted enzymatic and chemical polymerization of aniline in a buffer solution of sodium dodecylbenzenesulfonate micelles was performed for the first time. The high-redox potential laccase from the fungus Trametes hirsuta was used as a catalyst and air oxygen served as an oxidant. Potentiometric and spectral methods have shown that oligomeric/polymeric products of the enzymatic polymerization of aniline are synthesized in the conducting emeraldine salt form immediately after the reaction is initiated by the enzyme. The use of the laccase-mediator system enabled a higher rate of enzymatic polymerization and a higher yield of final products. Potassium octocyanomolybdate (IV) served as a redox mediator. The products of the enzymatic polymerization of aniline were studied by the ATR-FTIR, MALDI-TOF and atomic force microscopy methods. The chemical oxidative polymerization of aniline under the same conditions resulted in forming a non-conducting dark brown product.

Betaine-Based Deep Eutectic Solvent as a New Media for Laccase-Catalyzed Template-Guided Polymerization/Copolymerization of Aniline and 3-Aminobenzoic Acid.

Deep eutectic solvents (DESs) can compensate for some of the major drawbacks of traditional organic solvents and ionic liquids and meet all requirements of green chemistry. However, the potential of their use as a medium for biocatalytic reactions has not been adequately studied. In this work we used the DES betaine-glycerol with a molar ratio of 1:2 as co-solvent for enzymatic template-guided polymerization/copolymerization of aniline (ANI) and 3-aminobenzoic acid (3ABA). The laccase from the basidial fungus Trametes hirsuta and air oxygen served as catalyst and oxidant, respectively. Sodium polystyrene sulfonate (PSS) was used as template. Interpolyelectrolyte complexes of homopolymers polyaniline (PANI) and poly(3-aminobenzoic acid) (P3ABA) and copolymer poly(aniline-co-3-aminobenzoic acid) (P(ANI-3ABA)) were prepared and their physico-chemical properties were studied by UV-Vis and FTIR spectroscopy and cyclic voltammetry. According to the results obtained by atomic force microscopy, PANI/PSS had a granular shape, P(ANI-3ABA)/PSS had a spherical shape and P3ABA/PSS had a spindle-like shape. The copolymer showed a greater antimicrobial activity against Escherichia coli and Staphylcocus aureus as compared with the homopolymers. The minimal inhibitory concentration of the P(ANI-3ABA)/PSS against the gram-positive bacterium S. aureus was 0.125 mg mL-1.

Laccases with Variable Properties from Different Strains of Steccherinum ochraceum: Does Glycosylation Matter?

Laccases are blue multi-copper oxidases with an extensive number of actual and potential industrial applications. It is known that laccases from different fungal strains may vary in properties; however, the reason of this remains unclear. In the current study we have isolated and characterized seven laccases from different strains of Steccherinum ochraceum obtained from regions of central Russia. Although all seven laccases had the same primary sequences, there was a little variation in their molecular weights and thermostabilities. Moreover, statistically significant differences in laccases' catalytic parameters of oxidation of phenolic substrates and ABTS were observed. After the deglycosylation of four selected laccases by Endo H and PNGase F, their affinities to pyrocatechol and ABTS became the same, suggesting a substantial role of N-linked glycosylation in moderation of enzymatic properties of laccases.

Enzymatic synthesis and electrochemical characterization of sodium 1,2-naphthoquinone-4-sulfonate-doped PEDOT/MWCNT composite.

The development of novel materials with improved functional characteristics for supercapacitor electrodes is of current concern and calls for elaboration of innovative approaches. We report on an eco-friendly enzymatic synthesis of a composite based on poly(3,4-ethylenedioxythiophene) (PEDOT) and multi-walled carbon nanotubes (MWCNTs). The redox active compound, sodium 1,2-naphthoquinone-4-sulfonate (NQS), was used as a dopant for the backbone of the polymer. Oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT) was catalyzed by a high redox potential laccase from the fungus Trametes hirsuta. Atmospheric oxygen served as an oxidant. A uniform thin layer of NQS-doped PEDOT formed on the surface of MWCNTs as a result of the enzymatic polymerization. The PEDOT-NQS/MWCNT composite showed a high specific capacitance of ca. 575 F g-1 at a potential scan rate of 5 mV s-1 and an excellent cycling stability within a potential window between -0.5 and 1.0 V, which makes it a promising electrode material for high-performance supercapacitors.

Enzymatic oxidation of manganese ions catalysed by laccase.

The principal possibility of enzymatic oxidation of manganese ions by fungal Trametes hirsuta laccase in the presence of oxalate and tartrate ions, whereas not for plant Rhus vernicifera laccase, was demonstrated. Detailed kinetic studies of the oxidation of different enzyme substrates along with oxygen reduction by the enzymes show that in air-saturated solutions the rate of oxygen reduction by the T2/T3 cluster of laccases is fast enough not to be a readily noticeable contribution to the overall turnover rate. Indeed, the limiting step of the oxidation of high-redox potential compounds, such as chelated manganese ions, is the electron transfer from the electron donor to the T1 site of the fungal laccase.

Autoreduction and aggregation of fungal laccase in solution phase: possible correlation with a resting form of laccase.

This paper reports results of a reexamination of some poorly understood peculiarities of laccases, an enzyme family which has been extensively studied in our laboratories as well as by others for some years. The issue that is reconsidered here is the previously proposed existence of "active" and "resting" forms of laccases. The presence of fungal laccases with partly reduced active sites is demonstrated. Of further interest is that an aggregated state in solution, not to our knowledge previously noted for laccase, has been found by using small-angle X-ray scattering as well as thorough analysis of the results of several biochemical experiments. Under some conditions, this aggregated state may correlate with the resting form of the laccases, although this resting form could have a broader significance. It was shown that Trametes ochracea laccase had some anomalous characteristics, which could be correlated with the high concentration of the "resting" enzyme. The mechanism of formation of resting laccase is suggested. Knowledge of the resting state is of importance for in vitro studies. Additionally, a suggestion about the possible regulatory role of this form in vivo is mentioned.

Electrochemical redox transformations of T1 and T2 copper sites in native Trametes hirsuta laccase at gold electrode.

Mediatorless, electrochemically driven, redox transformations of T1 (type 1) and T2 copper sites in Trametes hirsuta laccase were studied by cyclic voltammetry and spectroelectrochemical redox titrations using bare gold electrode. DET (direct electron transfer) between the electrode and the enzyme was observed under anaerobic conditions. From analysis of experimental data it is concluded that the T2 copper site is in DET contact with gold. It was found that electron transfer between the gold surface and the T1 copper site progresses through the T2 copper site. From EPR measurements and electrochemical data it is proposed that the redox potential of the T2 site for high-potential 'blue' laccase is equal to about 400 mV versus NHE (normal hydrogen electrode) at pH 6.5. The hypothesis that the redox potentials of the T2 copper sites in low- and high-potential laccases/oxidases from totally different sources might be very similar, i.e. approx. 400 mV, is discussed.

Direct electron transfer between copper-containing proteins and electrodes.

The electrochemistry of some copper-containing proteins and enzymes, viz. azurin, galactose oxidase, tyrosinase (catechol oxidase), and the "blue" multicopper oxidases (ascorbate oxidase, bilirubin oxidase, ceruloplasmin, laccase) is reviewed and discussed in conjunction with their basic biochemical and structural characteristics. It is shown that long-range electron transfer between these enzymes and electrodes can be established, and the mechanistic schemes of the DET processes are proposed.

Direct electron transfer reactions of laccases from different origins on carbon electrodes.

Electrochemical studies of laccases from basidiomycetes, i.e., Trametes hirsuta, Trametes ochracea, Coriolopsis fulvocinerea, Cerrena maxima, and Cerrena unicolor, have been performed. Direct (mediatorless) electrochemistry of laccases on graphite electrodes has been investigated with cyclic voltammetry, square wave voltammetry as well as potentiometry. For all mentioned high potential laccases direct electron transfer (DET) has been registered at spectrographic graphite and highly ordered pyrolytic graphite electrodes. The characteristics of DET reactions of the enzymes were analysed under aerobic and anaerobic conditions. It is shown that the T1 site of the laccase is the primary electron acceptor, both in solution (homogenous case) and at surface of the graphite electrode (heterogeneous case). A mechanism of ET for the process of the electro-reduction of oxygen at the laccase-modified graphite electrodes is proposed and the similarity of this heterogeneous process to the laccase catalysed oxygen reduction homogeneous reaction is concluded.

Laccase and Mn-peroxidase production by Coriolus hirsutus strain 075 in a jar fermentor.

The white-rot fungus Coriolus hirsutus strain 075 excretes considerable amounts of laccase and Mn-peroxidase into culture broth over a brief production time. The effects of agitation speed, temperature, aeration and inoculum amount on laccase production using a 10-l fermentor were studied. The optimum fermentation conditions were a 15% inoculum, an aeration rate of 0.88 vvm, an agitation speed of 160 rpm, and a temperature of 28 degrees C. By optimizing the fermentation conditions, the laccase activity reached 80+/-3 U/ml in 3 d and the purified enzyme output was 30 mg/l. The laccase and Mn-peroxidase were purified by means of isoelectrofocusing and ion-exchange chromatography. The pIs of the laccase isoenzymes were 4.2 and 4.5. Mn-peroxidase had only one isoenzyme with a pI of 3.2. The optimum pH was 4.5 for laccase with syringaldazine as the substrate and 5.0-5.3 for Mn-peroxidase with Mn(+2) and H2O2 as the substrates. The laccase and Mn-peroxidase retained 50% of their activities at 50 degrees C after 55 h and 12 h of incubation time, respectively.

Characterization of two new multiforms of Trametes pubescens laccase.

Electrochemical properties of two multiforms of laccase from Trametes pubescens basidiomycete (LAC1 and LAC2) have been studied. The standard redox potentials of the T1 sites of the enzymes were found to be 746 and 738 mV vs. NHE for LAC1 and LAC2, respectively. Bioelectroreduction of oxygen based on direct electron transfer between each of the two forms of Trametes pubescens laccase and spectrographic graphite electrodes has been demonstrated and studied. It is concluded that the T1 site of laccase is the first electron acceptor, both in solution (homogeneous case) and when the enzymes are adsorbed on the surface of the graphite electrode (heterogeneous case). Thus, the previously proposed mechanism of oxygen bioelectroreduction by adsorbed fungal laccase was additionally confirmed using two forms of the enzyme. Moreover, the assumed need for extracellular laccase to communicate directly and electronically with a solid matrix (lignin) in the course of lignin degradation is discussed. In summary, the possible roles of multiforms of the enzyme based on their electrochemical, biochemical, spectral, and kinetic properties have been suggested to consist in broadening of the substrate specificity of the enzyme, in turn yielding the possibility to dynamically regulate the process of lignin degradation according to the real-time survival needs of the organism.

Application of cellulose-based self-assembled tri-enzyme system in a pseudo-reagent-less biosensor for biogenic catecholamine detection.

Amorphous cellulose was used as a specific carrier for the deposition of self-assembled multienzyme complexes capable of catalyzing coupled reactions. Naturally glycosylated fungal cellobiohydrolases (CBHs) of glycosyl hydrolase families 6 and 7 were specifically deposited onto the cellulose surface through their family I cellulose-binding modules (CBM). Naturally glycosylated fungal laccase was then deposited onto the preformed glycoprotein layer pretreated by ConA, through the interaction of mannosyl moieties of fungal glycoproteins with the multivalent lectin. The formation of a cellulase-ConA-laccase composite was proven by direct and indirect determination of activity of immobilized laccase. In the absence of cellulases and ConA, no laccase deposition onto the cellulose surface was observed. Finally, basidiomycetous cellobiose dehydrogenase (CDH) was deposited onto the cellulose surface through the specific interaction of its FAD domain with cellulose. The obtained paste was applied onto the surface of a Clark-type oxygen electrode and covered with a dialysis membrane. In the presence of traces of catechol or dopamine as mediators, the obtained immobilized multienzyme composite was capable of the coupled oxidation of cellulose by dissolved oxygen, thus providing the basis for a sensitive assay of the mediator. Swollen amorphous cellulose plays three different roles in the obtained biosensor as: (i) a gelforming matrix that captures the analyte and its oxidized intermediate, (ii) a specific carrier for protein self-assembly, and (iii) a source of excess substrate for a pseudo-reagent-less assay with signal amplification. The detection limit of such a tri-enzyme biosensor is 50-100 nM dopamine.