Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

Automated artificial intelligence-based three-dimensional comparison of orthodontic treatment outcomes with and without piezocision surgery.

OBJECTIVE(S): This study aims to evaluate the influence of the piezocision surgery in the orthodontic biomechanics, as well as in the magnitude and direction of tooth movement in the mandibular arch using novel artificial intelligence (AI)-automated tools. MATERIALS AND METHODS: Nineteen patients, who had piezocision performed in the lower arch at the beginning of treatment with the goal of accelerating tooth movement, were compared to 19 patients who did not receive piezocision. Cone beam computed tomography (CBCT) and intraoral scans (IOS) were acquired before and after orthodontic treatment. AI-automated dental tools were used to segment and locate landmarks in dental crowns from IOS and root canals from CBCT scans to quantify 3D tooth movement. Differences in mesial-distal, buccolingual, intrusion and extrusion linear movements, as well as tooth long axis angulation and rotation were compared. RESULTS: The treatment time for the control and experimental groups were 13.2 ± 5.06 and 13 ± 5.52 months respectively (P = .176). Overall, anterior and posterior tooth movement presented similar 3D linear and angular changes in the groups. The piezocision group demonstrated greater (P = .01) mesial long axis angulation of lower right first premolar (4.4 ± 6°) compared with control group (0.02 ± 4.9°), while the mesial rotation was significantly smaller (P = .008) in the experimental group (0.5 ± 7.8°) than in the control (8.5 ± 9.8°) considering the same tooth. CONCLUSION: The open source-automated dental tools facilitated the clinicians' assessment of piezocision treatment outcomes. The piezocision surgery prior to the orthodontic treatment did not decrease the treatment time and did not influence in the orthodontic biomechanics, leading to similar tooth movements compared to conventional treatment.

Automatic landmark identification in cone-beam computed tomography.

OBJECTIVE: To present and validate an open-source fully automated landmark placement (ALICBCT) tool for cone-beam computed tomography scans. MATERIALS AND METHODS: One hundred and forty-three large and medium field of view cone-beam computed tomography (CBCT) were used to train and test a novel approach, called ALICBCT that reformulates landmark detection as a classification problem through a virtual agent placed inside volumetric images. The landmark agents were trained to navigate in a multi-scale volumetric space to reach the estimated landmark position. The agent movements decision relies on a combination of DenseNet feature network and fully connected layers. For each CBCT, 32 ground truth landmark positions were identified by 2 clinician experts. After validation of the 32 landmarks, new models were trained to identify a total of 119 landmarks that are commonly used in clinical studies for the quantification of changes in bone morphology and tooth position. RESULTS: Our method achieved a high accuracy with an average of 1.54 ± 0.87 mm error for the 32 landmark positions with rare failures, taking an average of 4.2 second computation time to identify each landmark in one large 3D-CBCT scan using a conventional GPU. CONCLUSION: The ALICBCT algorithm is a robust automatic identification tool that has been deployed for clinical and research use as an extension in the 3D Slicer platform allowing continuous updates for increased precision.

Three-dimensional comparison of bone-borne and tooth-bone-borne maxillary expansion in young adults with maxillary skeletal deficiency.

OBJECTIVE: To compare the transverse dental and skeletal changes in patients treated with bone-anchored palatal expander (bone-borne, BB) compared to patients treated with tooth and bone-anchored palatal expanders (tooth-bone-borne, TBB) using cone-beam computer tomography (CBCT) and 3D image analysis. METHODS: The sample comprised 30 patients with transverse maxillary discrepancy treated with two different types of appliances: bone-borne (Group BB) and tooth-bone-borne (Group TBB) expanders. CBCT scans were acquired before (T1) and after completion of maxillary expansion (T2); the interval was 5.4 ± 3.4 and 6.2 ± 2.1 months between the T1 and the T2 scans of Group TBB (tooth-bone-borne) and Group BB (bone-borne), respectively. Transverse, anteroposterior and vertical linear and angular three-dimensional dentoskeletal changes were assessed after cranial base superimposition. RESULTS: Both groups displayed marked transverse skeletal expansion with a greater ratio of skeletal to dental changes. Greater changes at the nasal cavity, zygoma and orbital levels were found in Group BB. A relatively parallel sutural opening in an anterior-posterior direction was observed in Group TBB; however, the Group BB presented a somewhat triangular (V-shaped) opening of the suture that was wider anteriorly. Small downward-forward displacements were observed in both groups. Asymmetric expansion occurred in approximately 50% of the patients in both groups. CONCLUSION: Greater skeletal vs dental expansion ratio and expansion of the circummaxillary regions were found in Group BB, the group in which a bone-borne expander was used. Both groups presented skeletal and dental changes, with a similar amount of posterior palate expansion. Asymmetric expansion was observed in both groups.

Comparison and reproducibility of three methods for maxillary digital dental model registration in open bite patients.

OBJECTIVE: To compare and assess the reproducibility of 3 methods for registration of maxillary digital dental models in patients with anterior open bite. Settings and sample population Digital dental models of 16 children with an anterior open bite in the mixed dentition were obtained before (T1) and after 12 months of treatment with bonded spurs (T2). METHODS: Landmarks were placed on all T2 models and 3 registration methods (R1, R2 and R3) were independently performed by 2 observers. R1 was based on 10 landmarks placed on posterior teeth. R2 was based on 5 landmarks on the palate (2 anterior, 2 posterior and 1 central). R3 used regions of interest around the 5 palatal landmarks used in R2. The differences between the registration methods were calculated by comparing the mean differences and standard deviations between the corresponding x, y and z coordinates of 6 corresponding landmarks in the T2 registered models. Repeated measures analysis of variance followed by post-hoc Bonferroni tests were used for comparisons (P < .05). The agreement between methods and the intra and interobserver reproducibility were assessed with Bland-Altman tests and intraclass correlation coefficients (ICC). RESULTS: Comparisons of R2 with R3 methods showed greater agreement, mean differences ≤0.50 mm for all landmarks, than comparisons of R1 with R2, and R1 with R3, mean differences >0.50 mm for most of the y and z coordinates (P < .05). The R1 and R3 methods presented excellent intra and interobserver reproducibility and R2 method had moderate interobserver reproducibility. CONCLUSIONS: Longitudinal assessments of open bite treatment using digital dental models could consider the posterior teeth and/or the palate as references. The R1 and R3 methods showed adequate reproducibility and yield different quantitative results. The choice will depend on the posterior teeth changes and dental models' characteristics.

Dental long axes using digital dental models compared to cone-beam computed tomography.

OBJECTIVE: Standard methods of evaluating tooth long axes are not comparable (digital dental models [DDMs], panoramic and cephalometric radiographs) or expose patients to more radiation (cone-beam computed tomography [CBCT]). This study aimed to compare angular changes in tooth long axes using DDMs vs using CBCTs. SETTINGS AND SAMPLE POPULATION: Secondary data analysis of DDMs and CBCTs, taken before and after orthodontic treatment with piezocision of 24 patients. METHODS: Angular changes in tooth long axes were evaluated using landmarks on first molars (centre of the occlusal surface and centre of the furcation), canines and incisors (cusp tip and centre of the root at the cementoenamel junction). Wilcoxon test, intraclass correlation coefficient (ICC) and Bland-Altman plots were used to test intra- and inter-rater agreement and compare DDM and CBCT measurements. RESULTS: The mesiodistal angulation and buccolingual inclination DDM measurements were reproducible. Overall mean differences between DDM and CBCT measurements of mesiodistal angulation, 1.9°±1.5°, and buccolingual inclination, 2.2 ± 2.2°, were not significant for all teeth. ICC between DDM and CBCT measurements ranged from good (0.85 molars) to excellent (0.94 canines; 0.96 incisors). The percentages of measurements outside the range of ±5 were 17.4% for molars, 13.8% for canines and 4.5% for incisors. CONCLUSIONS: DDM assessment of changes in tooth long axes has good reproducibility and yields comparable measurements to those obtained from CBCT within a 5° range. These findings lay the groundwork for machine learning approaches that synthesize crown and root canal information towards planning tooth movement without the need for ionizing radiation scans.

Presurgical orthodontic decompensation with clear aligners.

INTRODUCTION: Orthodontists, surgeons, and patients have taken an interest in using clear aligners in combination with orthognathic surgery. This study aimed to evaluate the accuracy of tooth movements with clear aligners during presurgical orthodontics using novel 3-dimensional superimposition techniques. METHODS: The study sample consisted of 20 patients who have completed presurgical orthodontics using Invisalign clear aligners. Initial (pretreatment) digital dental models, presurgical digital dental models, and ClinCheck prediction models were obtained. Presurgical models were superimposed onto initial ones using stable anatomic landmarks; ClinCheck models were superimposed onto presurgical models using surface best-fit superimposition. Five hundred forty-five teeth were measured for 3 angular movements (buccolingual torque, mesiodistal tip, and rotation) and 4 linear movements (buccolingual, mesiodistal, vertical, and total scalar displacement). The predicted tooth movement was compared with the achieved amount for each movement and tooth, using both percentage accuracy and numerical difference. RESULTS: Average percentage accuracy (63.4% ± 11.5%) was higher than in previously reported literature. The most accurate tooth movements were buccal torque and mesial displacement compared with lingual torque and distal displacement, particularly for mandibular posterior teeth. Clinically significant inaccuracies were found for the buccal displacement of maxillary second molars, lingual displacement of all molars, intrusion of mandibular second molars, the distal tip of molars, second premolars, and mandibular first premolars, buccal torque of maxillary central and lateral incisors, and lingual torque of premolars and molars. CONCLUSIONS: Superimposition techniques used in this study lay the groundwork for future studies to analyze advanced clear aligner patients. Invisalign is a treatment modality that can be considered for presurgical orthodontics-tooth movements involved in arch leveling and decompensation are highly accurate when comparing the simulated and the clinically achieved movements.

Three-dimensional evaluation of skeletal and dental effects of treatment with maxillary skeletal expansion.

INTRODUCTION: The objective was to determine the skeletal and dental changes with microimplant assisted rapid palatal expansion (MARPE) appliances in growing (GR) and nongrowing (NG) patients using cone-beam computed tomography and 3-dimensional imaging analysis. METHODS: The sample consisted of 25 patients with transverse maxillary discrepancy treated with a maxillary skeletal expander, a type of MARPE appliance. Cone-beam computed tomography scans were taken before and after maxillary expansion; the interval was 6.0 ± 4.3 months. The sample was divided into GR and NG groups using cervical vertebral and midpalatal suture maturation. Linear and angular 3-dimensional dentoskeletal changes were assessed after cranial base superimposition. Groups were compared with independent-samples t test (P <0.05). RESULTS: Both groups displayed marked transverse changes with a similar ratio of skeletal to dental transverse changes and parallel sutural opening from the posterior nasal spine-anterior nasal spine; a similar amount of expansion occurred in the anterior and the posterior regions of the maxilla. The maxilla expanded skeletally without rotational displacements in both groups. The small downward-forward displacements were similar in both groups, except that the GR group had a significantly greater vertical displacement of the canines (GR, 1.7 ±1.0 mm; NG, 0.6 ± 0.8 mm; P = 0.02) and anterior nasal spine (GR, 1.1 ± 0.6 mm; NG, 0.5 ± 0.5 mm; P = 0.004). CONCLUSIONS: Treatment of patients with MARPE appliance is effective in GR and NG patients. Although greater skeletal and dental changes were observed in GR patients, a similar ratio of skeletal to dental transverse changes was observed in both groups.

Interdisciplinary dental management of patient with oligodontia and maxillary hypoplasia: a case report.

BACKGROUND: The craniofacial developmental abnormality can significantly complicate the oral rehabilitation of patients with oligodontia. This case report describes an interdisciplinary approach that took 7 years to successfully treat a young patient with non-syndromic oligodontia and midface deficiency. CASE PRESENTATION: A 14-year-old patient with complex oral and maxillofacial conditions and diagnosis of oligodontia presented to our clinic. In addition to 4 retained deciduous teeth and congenitally missing 10 permanent teeth, dentofacial findings included maxillary and malar deficiency with a concave facial profile, Angle Class III malocclusion, and poor dental esthetics. The interdisciplinary treatment included pre-surgical orthodontic decompensation, high Le Fort I maxillary osteotomy, postsurgical orthodontic therapy, osseous ridge augmentation using recombinant human bone morphogenetic protein-2 (rhBMP-2), interim removable partial denture, dental implant installation, interim implant prostheses, and final prosthetic rehabilitation. CONCLUSIONS: The successful treatment of patients with oligodontia and complex dentofacial abnormalities requires the close and orderly collaboration among orthodontist, oral maxillofacial surgeon, and prosthodontist. Within the limitations of this case report, presented interdisciplinary approaches may optimize the oral rehabilitation outcome in patients with similar clinical challenges. A prospective clinical investigation is desired to verify the benefit of presented interdisciplinary approach.

Clinical decision support systems in orthodontics: A narrative review of data science approaches.

Advancements in technology and data collection generated immense amounts of information from various sources such as health records, clinical examination, imaging, medical devices, as well as experimental and biological data. Proper management and analysis of these data via high-end computing solutions, artificial intelligence and machine learning approaches can assist in extracting meaningful information that enhances population health and well-being. Furthermore, the extracted knowledge can provide new avenues for modern healthcare delivery via clinical decision support systems. This manuscript presents a narrative review of data science approaches for clinical decision support systems in orthodontics. We describe the fundamental components of data science approaches including (a) Data collection, storage and management; (b) Data processing; (c) In-depth data analysis; and (d) Data communication. Then, we introduce a web-based data management platform, the Data Storage for Computation and Integration, for temporomandibular joint and dental clinical decision support systems.

Maxillary dentoskeletal outcomes of the expander with differential opening and the fan-type expander: a randomized controlled trial.

OBJECTIVES: The aim of this study was to compare the maxillary dentoskeletal outcomes of the expander with differential opening (EDO) and the fan-type expander (FE). MATERIAL AND METHODS: Forty-eight patients with maxillary arch constriction in the mixed dentition were randomly allocated into EDO and FE groups. Cone-beam computed tomography scans were acquired before and after expansion. Linear and angular three-dimensional changes were assessed after cranial base superimposition using the ITK-SNAP and the 3D Slicer software. T or Mann-Whitney U tests were used for intergroup comparisons (P<0.05). RESULTS: The EDO group comprised 24 patients treated with the EDO (13 female, 11 male; 7.6 years). The FE group comprised 24 patients treated with the FE (14 female, 10 male; 7.8 years). Skeletal lateral displacements were greater in the EDO group with greater expansion in the orbital, nasal cavity, zygomatic bone, and palate regions (mean intergroup differences of 0.4, 0.8, 0.9, and 1.1 mm, respectively). Intercanine expansion and canine buccal inclination were greater in the FE group, while intermolar distance changes and molar buccal inclination were greater in the EDO group. Similar changes were observed for vertical and anteroposterior displacements and palatal plane rotation. CONCLUSIONS: The EDO produced greater transverse skeletal expansion compared to the FE, with similar vertical and anteroposterior effects. Dental changes were greater in the molar region for patients treated with the EDO and in the canine region for patients treated with the FE. CLINICAL RELEVANCE: The EDO and the FE are capable of producing skeletal changes in the mixed dentition. The decision between both expanders will depend on the amount of expansion required in the molar region and in the nasomaxillary complex. TRIAL REGISTRATION: The trial was registered at ClinicalTrials.gov , under the identifier NCT03705871.

Three-dimensional mandibular dental changes with aging.

INTRODUCTION: This study aimed to evaluate the 3-dimensional (3D) mandibular dental changes over 42 years using the registration of digital models. METHODS: The sample comprised digital dental models of 8 untreated subjects (4 males and 4 females) with normal occlusion measured longitudinally at ages 17 years (T1) and 60 years (T2). Using 13 landmarks placed on the mucogingival junction, we registered the T2 model on the T1 model. Three-dimensional changes in the position of the landmarks on the buccal cusp tip of the posterior teeth and incisal edge of the central incisors were measured by 2 examiners. Registration and measurements were performed using SlicerCMF (version 3.1; http://www.slicer.org) software. Intra- and interrater agreements were evaluated using intraclass correlation coefficients and the Bland-Altman method. One-sample t tests were used for evaluating interphase 3D dental changes (P <0.05). RESULTS: Adequate intra- and interrater reproducibility was found. From T1 to T2, the mandibular teeth showed significant 3D positional changes. A significant dental eruption relative to the mucogingival junction was observed for the anterior and posterior teeth. Anteroposterior movements of mandibular teeth were not significant except for the right molar that drifted mesially. Transverse movements included slight lingual tipping at canines and premolars regions. CONCLUSIONS: Dental changes in untreated normal occlusion were very slight from early to mature adulthood. The eruption of the mandibular teeth was the most consistent finding. A tendency for mesial movement of molars and lingual movement of first premolars and canines was observed in the mandible during the aging process.

Decision Support Systems in Temporomandibular Joint Osteoarthritis: A review of Data Science and Artificial Intelligence Applications.

With the exponential growth of computational systems and increased patient data acquisition, dental research faces new challenges to manage a large quantity of information. For this reason, data science approaches are needed for the integrative diagnosis of multifactorial diseases, such as Temporomandibular joint (TMJ) Osteoarthritis (OA). The Data science spectrum includes data capture/acquisition, data processing with optimized web-based storage and management, data analytics involving in-depth statistical analysis, machine learning (ML) approaches, and data communication. Artificial intelligence (AI) plays a crucial role in this process. It consists of developing computational systems that can perform human intelligence tasks, such as disease diagnosis, using many features to help in the decision-making support. Patient's clinical parameters, imaging exams, and molecular data are used as the input in cross-validation tasks, and human annotation/diagnosis is also used as the gold standard to train computational learning models and automatic disease classifiers. This paper aims to review and describe AI and ML techniques to diagnose TMJ OA and data science approaches for imaging processing. We used a web-based system for multi-center data communication, algorithms integration, statistics deployment, and process the computational machine learning models. We successfully show AI and data-science applications using patients' data to improve the TMJ OA diagnosis decision-making towards personalized medicine.

A three-dimensional analysis of primary failure of eruption in humans and mice.

OBJECTIVES: Primary failure of eruption (PFE) is a genetic disorder exhibiting the cessation of tooth eruption. Loss-of-function mutations in parathyroid hormone (PTH)/parathyroid hormone-related peptide (PTHrP) receptor (PTH/PTHrP receptor, PPR) were reported as the underlying cause of this disorder in humans. We showed in a PFE mouse model that PTHrP-PPR signaling is responsible for normal dental follicle cell differentiation and tooth eruption. However, the mechanism underlying the eruption defect in PFE remains undefined. In this descriptive study, we aim to chronologically observe tooth eruption and root formation of mouse PFE molars through 3D microCT analyses. SETTING AND SAMPLE POPULATION: Two individuals with PFE were recruited at Showa University. A mouse PFE model was generated by deleting PPR specifically in PTHrP-expressing dental follicle and divided into three groups, PPRfl/fl ;R26RtdTomato/+ (Control), PTHrP-creER;PPRfl/+ ;R26RtdTomato/+ (cHet), and PTHrP-creER;PRRfl/fl ;R26RtdTomato/+ (cKO). MATERIALS AND METHODS: Images from human PFE subjects were acquired by CBCT. All groups of mouse samples were studied at postnatal days 14, 25, 91, and 182 after a tamoxifen pulse at P3, and superimposition of 3D microCT images among three groups was rendered. RESULTS: Mouse and human PFE molars exhibited a similar presentation in the 3D CT analyses. The quantitative analysis in mice demonstrated a statistically significant decrease in the eruption height of cKO first and second molars compared to other groups after postnatal day 25. Additionally, cKO molars demonstrated significantly shortened roots with dilacerations associated with the reduced interradicular bone height. CONCLUSIONS: Mouse PFE molars erupt at a much slower rate compared to normal molars, associated with shortened and dilacerated roots and defective interradicular bones.

Comparison of linear and angular changes assessed in digital dental models and cone-beam computed tomography.

OBJECTIVE: To compare the three-dimensional (3D) linear displacements and the mesiodistal and buccolingual angulation changes after orthodontic treatment in digital dental models (DDMs) and 3D models derived from cone-beam computed tomography (CBCT). SETTINGS AND SAMPLE POPULATION: Digital dental model and CBCT scans were selected from 24 adults who had undergone orthodontic treatment for mandibular anterior crowding. MATERIAL AND METHODS: 3D linear displacements and changes in angular measurements (mesiodistal and buccolingual angulation) were assessed in pre- and post-treatment DDM and CBCT images using the software ITK-snap and 3D SlicerCMF. Intra- and inter-rater agreement of measurements in DDM and CBCT were tested using the intraclass correlation coefficient (ICC). DDM and CBCT measurements were compared using the Wilcoxon test (P < .05), ICC and Bland-Altman plots. RESULTS: Intra- and inter-rater agreement varied from good (ICC > 0.75) to excellent (ICC > 0.90) for both DDM and CBCT measurements. Although no significant difference between DDM and CBCT methods was observed for linear measurements of tooth movement, the angular assessments were different for most measurements. The agreement between measurements from both assessments varied from poor to excellent. CONCLUSIONS: Longitudinal assessments of tooth movements including 3D linear displacements and mesiodistal and buccolingual angulation are reproducible when using both DDM and CBCT. Changes in angular measurements due to orthodontic treatment are discordant when measured in the digital models (clinical crown) and in the CBCT images (whole tooth).

Dental anomaly pattern and multiple ectopic teeth.

Treatment for a patient with a dental anomaly pattern is challenging and complex. This article presents a rare case with an association of multiple ectopic eruptions treated in 2 phases. An 8-year-old boy in the early mixed dentition showed a Class II, Division 2 malocclusion, and an ectopic eruption of the mandibular right lateral incisor. The treatment plan included extractions of the deciduous mandibular right lateral incisor and canine, followed by partial mandibular fixed appliances and a lingual arch. In the late mixed dentition, the panoramic radiograph showed bilateral ectopic eruptions of the maxillary canines. The deciduous maxillary canines were extracted, and a cervical headgear was installed. Within 12 months, both permanent maxillary canines spontaneously erupted. Comprehensive orthodontic treatment was initiated when the patient was aged 13 years to level the curve of Spee and reduce the overbite. Phase 2 lasted 15 months. In patients with dental anomaly patterns, longitudinal follow-up during the mixed dentition is highly important and might contribute to simplifying comprehensive orthodontic treatment and reducing complications and adverse effects.

Influence of bone-anchored maxillary protraction on secondary alveolar bone graft status in unilateral complete cleft lip and palate.

INTRODUCTION: Our objective was to evaluate the effects of bone-anchored maxillary protraction (BAMP) on the status of the secondary alveolar bone graft in patients with unilateral complete cleft lip and palate (UCLP). METHODS: The experimental group (EG) comprised 26 patients with UCLP, mean age of 11.9 years, submitted to secondary alveolar bone grafting (SABG) with recombinant bone morphogenetic protein, and BAMP therapy, using miniplate-borne Class III intermaxillary elastics. Cone beam computed tomography (CBCT) examinations were taken 6 months after SABG and before BAMP (T1) and after 18 months of BAMP therapy (T2). The control group (CG) was composed of 24 patients with UCLP submitted only to SABG with recombinant bone morphogenetic protein or autogenous bone from iliac crest without BAMP therapy, matched by initial age and sex with the EG. In the CG, CBCT examinations were performed 6 months (T1) and 12 months (T2) after SABG surgery. CBCT axial sections were analyzed using Garib scores in both time points. Intra- and intergroup comparisons were performed using Wilcoxon and Mann-Whitney tests, respectively (P <0.05). RESULTS: No intergroup differences were found at T1 and T2. The EG showed significant improvement of graft status from T1 to T2 at the cervical and middle levels of the alveolar cleft. No significant interphase differences were found for graft scores in the CG. CONCLUSIONS: Despite loads of intermaxillary elastics applied to the maxilla, no harm to the grafted alveolar bone was observed after BAMP therapy in patients with UCLP.

3D superimposition of craniofacial imaging-The utility of multicentre collaborations.

Clinical applications of 3D image registration and superimposition have contributed to better understanding growth changes and clinical outcomes. The use of 3D dental and craniofacial imaging in dentistry requires validate image analysis methods for improved diagnosis, treatment planning, navigation and assessment of treatment response. Volumetric 3D images, such as cone-beam computed tomography, can now be superimposed by voxels, surfaces or landmarks. Regardless of the image modality or the software tools, the concepts of regions or points of reference affect all quantitative of qualitative assessments. This study reviews current state of the art in 3D image analysis including 3D superimpositions relative to the cranial base and different regional superimpositions, the development of open source and commercial tools for 3D analysis, how this technology has increased clinical research collaborations from centres all around the globe, some insight on how to incorporate artificial intelligence for big data analysis and progress towards personalized orthodontics.

Superimposition of maxillary digital models using the palatal rugae: Does ageing affect the reliability?

OBJECTIVES: The aim of this study was to evaluate the reliability of 3-dimensional maxillary dental changes using two methods of digital model superimposition. SETTING AND SAMPLE POPULATION: The Department of Orthodontics of Bauru Dental School, University of São Paulo and University of Michigan Craniofacial Growth Center. Fifteen subjects with normal occlusion. MATERIAL & METHODS: The sample was composed of digital study models of 15 normal occlusion subjects taken at 13 (T1), 18 (T2) and 60 years of age (T3). Using the software SlicerCMF 3.1, superimposition (registration) was conducted using 9 landmarks placed on the incisive papilla, second and third palatal rugae and 10 mm distal to the third palatal rugae. Two registration methods were compared: landmarks (LA) and regions of interest (ROI). Three-dimensional changes of landmarks on the buccal cusp tip of posterior teeth bilaterally and the incisal edge of the right central incisor were measured by three examiners. Intraclass correlation coefficients and Bland-Altman method evaluated intra- and inter-examiner agreements. RESULTS: Good or excellent intra-examiner agreement was found for T1-T2 and T2-T3 measurements using both registration methods. Inter-examiner agreements were good to excellent for T1-T2 measurements and poor to fair for most T2-T3 measurements. Mean T1-T2 differences were less than 0.5 mm for most measurements. CONCLUSION: Maxillary digital dental models of patients with normal occlusion superimposed on palatal rugae showed an adequate reliability for a 5-year interval comparison using landmarks or regions of interest. Lower than acceptable reproducibility using both superimposition methods was found for a 40-year interval comparison.

Bone-anchored maxillary protraction in unilateral cleft lip and palate: a cephalometric appraisal.

OBJECTIVES: The aim of this study was to evaluate the cephalometric outcome of bone-anchored maxillary protraction (BAMP) in individuals with unilateral complete cleft lip and palate (UCLP). MATERIAL AND METHODS: The experimental group (EG) comprised 23 individuals (17 males and 6 females) with UCLP and a mean age of 11.7 years. At least 6 months after secondary alveolar bone grafting, Bollard miniplates were installed in the posterior region of the maxilla and in the anterior region of the mandible. Class III elastics were recommended to be worn for 24 hours/day for a mean time of 18 months. Cone beam computed tomography (CBCT) was obtained before (T1) and after treatment (T2). The control group (CG) consisted of 23 individuals with UCLP matched by initial age and gender with the EG and without any orthopaedic or surgical intervention performed between T1 and T2. The interval between T1 and T2 observations was 18 months for both groups. Twenty-one cephalometric variables were analysed. Intra- and intergroup comparisons were performed using paired and independent t-tests, respectively (P < 0.05). RESULTS: BAMP caused a greater maxillary protrusion (SNA) and a greater decrease of Class III maxillomandibular discrepancy (ANB and Wits appraisal) compared with the CG. BAMP also caused a counterclockwise rotation of the occlusal plane (Occ Plane to FH) and an improvement in the molar relationship compared with controls. CONCLUSIONS: BAMP therapy demonstrated a significant orthopaedic maxillary protraction and an improvement in the Class III skeletal pattern in UCLP.