RESUMO
Realizing efficient long-distance intramolecular charge transport based on a hopping mechanism is a key challenge in molecular electronics. In hopping transport, a smaller reorganization energy (λ) and energy difference between hopping sites (ΔEhs) should lead to a smaller activation energy and faster charge transfer. However, the development of π-extended molecules that meet these requirements is challenging. In this study, we successfully synthesized several nanometer-scale π-extended molecules composed of a fused π-conjugated unit as a hopping site for reducing λ. Conformational twists between fused units effectively localize π-conjugation in each unit, contributing to reducing ΔEhs. The expected electronic structures of the oligomers were confirmed using spectroscopic and electrochemical measurements. Single-molecule conductance measurements exhibited higher conductance and lower activation energy than those of nonfused oligothiophenes. First-principles calculations indicated that smaller λ and ΔEhs values explain the high conductance. These results highlight the efficiency of the proposed molecular design for effective intramolecular hopping transport.
RESUMO
The development of electron-accepting units is of significant importance because the construction of donor (D)-acceptor (A) configurations is an effective strategy for tuning the electronic properties of π-conjugated systems. Although doubly fused pentagons represented by diketopyrrolopyrrole (DPP) have been used as an effective electron-accepting unit, the relatively high-lying frontier molecular orbital levels (FMOs) leave room for further improvement. We report herein the synthesis of a fluorinated dihydropentalene-1,4-dione (FPD) derivative as a strong electron-accepting unit and the development of D-A-D π-extended molecules. X-ray analyses revealed that the presence of fluorine atoms contributed to the formation of high planar structures and slipped-stacked packing. Electrochemical measurements indicated that the FPD derivatives showed relatively lower FMO energy levels than the corresponding DPP-containing derivatives. The D-A-D molecule based on terthiophene and FPD showed semiconducting responses. This study demonstrates that the FPD unit can function as a new acceptor unit for organic semiconductors.
RESUMO
Invited for the cover of this issue are Soichi Yokoyama and Yutaka Ie at Osaka University, Japan. The image depicts the strong electron affinity of the fluorinated dihydropentalene-1,4-dione (FPD) structure, in which the electron-rich amino groups in the diketopyrrolopyrrole (DPP) skeleton are replaced with a strongly electronegative difluoromethylene unit. Read the full text of the article at 10.1002/chem.202203873.
RESUMO
The first and facile synthesis of N,N'-dialkylated 2,6,9-triazabicyclo[3.3.1]nonadienes was achieved by the [4 + 4] self-condensation of ß-formyl-ß-nitroenamine in the presence of ammonium acetate. The 2,6- and 2,9-dialkylated products were found to be interconvertible when dissolved in a solvent. This isomerization proceeds through intramolecular ring transformation via a common intermediate under equilibrium.
RESUMO
α-Nitrocinnamate underwent the conjugate addition of an active methylene compound such as nitroacetate, 1,3-dicarbonyl compound, or α-nitroketone, and the following ring closure afforded functionalized heterocyclic frameworks. The reaction of cinnamate with nitroacetate occurs via nucleophilic substitution of a nitro group by the O-attack of the nitronate, which results in isoxazoline N-oxide. This protocol was applicable to 1,3-dicarbonyl compounds to afford dihydrofuran derivatives, including those derived from direct substitution of a nitro group caused by O-attack of enolate. It was found the reactivity was lowered by an electron-withdrawing group on the carbonyl moiety. When α-nitroketone was employed as a substrate, three kinds of products were possibly formed; of these, only isoxazoline N-oxide was identified. This result indicates that the substituting ability of nitronate is higher than that of enolate for the direct SN2 substitution of a nitro group.
Assuntos
Isoxazóis/química , Cetonas/química , Óxidos de Nitrogênio/química , Óxidos/química , Carbono/química , Ácidos Carboxílicos , Elétrons , Ésteres , Furanos/química , Íons , Espectroscopia de Ressonância Magnética , Nitrocompostos/química , Propilaminas/química , EstereoisomerismoRESUMO
We synthesized a novel fluorophore of distyrylpyrrole derivatives possessing cyano groups at different positions on olefin. Their fluorescence properties in solution and solid state were investigated by photoluminescence quantum yield and lifetime measurements, which provided a radiative decay constant ( kf) and nonradiative decay constant ( knr). The derivative with cyano groups at the inner position of the molecule, inner isomer, shows a high fluorescence quantum yield (Φf = 0.43) in solution, while another derivative with a cyano group at the outer position, outer isomer, hardly shows fluorescence (Φf < 0.01) due to the large nonradiative decay ( knr > 10 ns-1). Upon formation of a single crystal or nanoparticles, these difference were inverted; the quantum yield of the outer and inner isomer was enhanced and diminished, respectively. We explained these differences between in solution and solid state by means of analysis of a single X-ray structure and computation study.
RESUMO
A highly efficient one-pot synthesis of ß,ß-dihalo-ß-nitroethyl alkyl ethers is achieved by the treatment of nitroalkenes with alcohols and N-halosuccinimides in the presence of sodium hydride. The notable advantages of this protocol are that it involves simple experimental manipulations and tolerates a wide range of functional groups. Further transformations of the obtained ethers, such as allylation and conversion to ß,ß-dihalogenated vinyl ethers, are also investigated.
RESUMO
An appropriate understanding of the process of self-assembly is of critical importance to tailor nanostructured order on 2D surfaces with functional molecules. Photochromic compounds are promising candidates for building blocks of advanced photoresponsive surfaces. To investigate the relationship between molecular structure and the mechanism of ordering formation, 2-thienyl-type diarylethenes with various lengths of alkyl side chains linked through an amide or ester group were synthesized. Their self-assemblies at a liquid/solid interface were investigated by scanning tunneling microscopy (STM). The concentration dependence of the surface coverage was analyzed by using a cooperative model for a 2D surface based on two characteristic parameters: the nucleation equilibrium constant (Kn) and the elongation equilibrium constant (Ke). The following conclusions can be drawn. 1)â The concentration at which a stable 2D molecular ordering is observed by STM exponentially decreases with increasing length of the alkyl chain. 2)â Compounds bearing amide groups have higher degrees of cooperativity in self-assembly on 2D surfaces (i.e., σ, which is defined as Kn/Ke) than compounds with ester groups. 3)â The self-assembly process of the open-ring isomer of an ester derivative is close to isodesmic, whereas that of the closed-ring isomer is cooperative because of the difference in equilibrium constants for the nucleation step (i.e., Kn) between the two isomers.
RESUMO
Stimulus control over 2D multicomponent molecular ordering on surfaces is a key technique for realizing advanced materials with stimuli-responsive surface properties. The formation of 2D molecular ordering along with photoisomerization was monitored by scanning tunneling microscopy at the octanoic acid/highly oriented pyrolytic graphite interface for a synthesized amide-containing diarylethene, which underwent photoisomerization between the open- and closed-ring isomers and also a side-reaction to give the annulated isomer. The nucleation (Kn) and elongation (Ke) equilibrium constants were determined by analysis of the concentration dependence of the surface coverage by using a cooperative model at the liquid/solid interface. It was found that the annulated isomer has a very large equilibrium constant, which explains the predominantly observed ordering of the annulated isomer. It was also found that the presence of the closed-ring isomer induces cooperativity into the formation of molecular ordering composed of the open-ring isomer. A quantitative analysis of the formation of ordering by using the cooperative model has provided a new view of the formation of 2D multicomponent molecular ordering.
RESUMO
We have investigated photoinduced ordering transformation of a photochromic terthiophene derivative by scanning tunneling microscopy (STM) at the trichlorobenzene (TCB)/highly oriented pyrolytic graphite (HOPG) interface. The open-ring and annulated isomers of the terthiophene formed two-dimensional molecular orderings with different patterns while the closed-ring isomer did not form any ordering. The ordering of the open-ring isomer exhibited polymorphism depending on the concentration of supernatant solution. Upon UV light irradiation to a solution of the open-ring isomer or the closed-ring isomer, ordering composed of the annulated isomer was irreversibly formed. Upon visible light irradiation or thermal stimulus to the closed-ring isomer, the two kinds of polymorph composed of the open-ring isomer were formed due to the polymorphism. By controlling photochromism and polymorphism among four states made of three photochemical isomers, four-state three-step transformation was achieved by in situ photoirradiation from a solution of the closed-ring isomer (no ordering) into the ordering composed of the open-ring isomer (ordering α and ß) followed by the orderings composed of the annulated isomer (ordering γ).
RESUMO
Impacts of the nitro groups on the electron-accepting and oxidizing abilities of N-propylpyridinium were evaluated quantitatively. A 3,5-dinitro derivative has efficiently quenched emission from photosensitizing Ru(ii) and Ir(iii) complexes owing to the thermodynamically-favored electron transfer to the pyridinium whose LUMO is greatly lowered by the presence of electron-withdrawing nitro groups.
RESUMO
The introduction of a colorless function to organic electronic devices allows responses to light in the near-infrared (NIR) region and is expected to broaden the applications of these devices. However, the development of a colorless NIR dye remains a challenge due to the lack of a rational molecular design for controlling electronic transitions. In this study, to suppress the π-π* transitions in the visible region, polycyclic donor-acceptor-donor π-conjugated molecules with boron bridges (Py-FNTz-B and IP-FNTz-B) are designed and synthesized, which contain pyrrole or indenopyrrole as donor units with fluorinated naphthobisthiadiazole (FNTz) as an acceptor unit. The pyrrole end-capped Py-FNTz-B shows an absorption band in the NIR region without distinct visible-light absorption, which has led to the establishment of colorless characteristics. The indenopyrrole end-capped IP-FNTz-B shows a narrow optical energy gap of 0.87 eV in films. Time-resolved microwave conductance and field-effect transistors demonstrate the semiconducting characteristics of these molecules, and Py-FNTz-B-based devices function as NIR phototransistors. Theoretical analyses indicate that the combination of a polyene-like electronic structure with orbital symmetry is important to obtain NIR wavelength-selective absorption. This study suggests that a molecular design based on electronic structures can be effective in the development of colorless NIR-absorbing dyes for organic electronics.
RESUMO
Understanding the transmission of nanoscale forces in the pico-to-nanonewton range is important in polymer physics. While physical approaches have limitations in analyzing the local force distribution in condensed environments, chemical analysis using force probes is promising. However, there are stringent requirements for probing the local forces generated before structural damage. The magnitude of those forces corresponds to the range below covalent bond scission (from 200 pN to several nN) and above thermal fluctuation (several pN). Here, we report a conformationally flexible dual-fluorescence force probe with a theoretically estimated threshold of approximately 100 pN. This probe enables ratiometric analysis of the distribution of local forces in a stretched polymer chain network. Without changing the intrinsic properties of the polymer, the force distribution was reversibly monitored in real time. Chemical control of the probe location demonstrated that the local stress concentration is twice as biased at crosslinkers than at main chains, particularly in a strain-hardening region. Due to the high sensitivity, the percentage of the stressed force probes was estimated to be more than 1000 times higher than the activation rate of a conventional mechanophore.
RESUMO
Dianionic cyano-aci-nitroacetate affords 3-cyanoisoxazol(in)es upon heating with a range of dipolarophiles in the presence of hydrochloric acid. In this reaction, nitroacetonitrile is formed as an intermediate active species, which serves as a synthetic equivalent of cyanonitrile oxide that can participate in a 1,3-dipolar cycloaddition reaction.
RESUMO
A facile method for synthesizing allyl propargyl ethers (APEs) was developed based on the dimerization of propargyl alcohols. The reaction proceeded via an oxaphosphetane intermediate, which was generated without the use of a strong base, thus making this process a pseudo-Wittig reaction under mild reaction conditions. A wide variety of functional groups, including formyl and pyridyl groups were tolerated, thus yielding the corresponding functionalized APEs, which are otherwise not readily prepared via conventional methods. Moreover, a cross-reaction was found to occur when the reaction was conducted in the presence of alcohols that were more acidic than propargyl alcohol, which suggests that the proton transfer from the intermediately formed betaine to the second alcohol is crucial for undergoing the dimerization.
Assuntos
Alcinos/química , Alcinos/síntese química , Éteres/síntese química , Fosfinas/química , Propanóis/química , Betaína , Dimerização , Fenômenos de Química Orgânica , PrótonsRESUMO
A photoresponsive self-assembly on a 2-D surface was investigated by scanning tunnelling microscopy (STM). The open-ring isomer of a diarylethene derivative showed an abrupt ordering formation at a critical concentration, which was successfully reproduced by a cooperative model based on Langmuir-type adsorption.