PINK1 Inhibits Multimeric Aggregation and Signaling of MAVS and MAVS-Dependent Lung Pathology.

Mitochondria have emerged as important signaling organelles where intracellular perturbations are integrated and, consequently, intracellular signaling pathways are modulated to execute appropriate cellular functions. MAVS (mitochondrial antiviral signaling protein) represents such an example that functions as a platform molecule to mediate mitochondrial innate immune signaling. Recently, multimeric aggregation of MAVS has been identified as a key molecular process for its signaling. The underlying mechanisms to regulate this, however, are still incompletely understood. We hypothesized that PINK1 (PTEN-induced kinase 1) plays an important role in the regulation of multimeric MAVS aggregation and its consequent pathobiology. To test whether PINK1 interacts with MAVS, bimolecular fluorescence complementation analysis and IP were performed. RLH (RIG-I-like helicase) and NLRP3 inflammasome signaling were evaluated by in vitro assay. In vivo functional significance of PINK1 in the regulation of MAVS signaling was evaluated from both murine modeling of influenza viral infection and bleomycin-induced experimental pulmonary fibrosis, wherein MAVS plays important roles. Multimeric MAVS aggregation was induced by mitochondria dysfunction, and, during this event, the stabilized PINK1 interacted physically with MAVS and antagonized multimeric MAVS aggregation. Accordingly, the MAVS-mediated antiviral innate immune and NLRP3 inflammasome signaling were enhanced in PINK1 deficiency. In addition, in vivo studies revealed that MAVS-mediated pulmonary antiviral innate immune responses and fibrotic responses after bleomycin injury were enhanced in PINK1 deficiency. In conclusion, these results establish a new role of PINK1 in the regulation of MAVS signaling and the consequent pulmonary pathobiology.

Mitochondrial antiviral signaling protein is crucial for the development of pulmonary fibrosis.

Danger signals, or damage-associated molecular patterns (DAMPs), instigate mitochondrial innate immune responses wherein mitochondrial antiviral signaling protein (MAVS) functions as a key platform molecule to mediate them. The role of MAVS in the pathogenesis of idiopathic pulmonary fibrosis (IPF), however, has not yet been identified. Whether MAVS signalling can be modulated by currently existing drugs has also not been explored.We used an established model of pulmonary fibrosis to demonstrate that MAVS is a critical mediator of multiple DAMP signalling pathways and the consequent lung fibrosis after bleomycin-induced injury in vivoAfter bleomycin injury, MAVS expression was mainly observed in macrophages. Multimeric MAVS aggregation, a key event of MAVS signalling activation, was significantly increased and persisted in bleomycin-injured lungs. A proapoptotic BH3 mimetic, ABT-263, attenuated the expression of MAVS and its signalling and, consequently, the development of experimental pulmonary fibrosis. In contrast, the therapeutic effects of nintedanib and pirfenidone, two drugs approved for IPF treatment, were not related to the modulation of MAVS or its signalling. Multimeric MAVS aggregation was significantly increased in lungs from IPF patients as well.MAVS may play an important role in the development of pulmonary fibrosis, and targeting MAVS with BH3 mimetics may provide a novel and much needed therapeutic strategy for IPF.

Impact of Cigarette Smoke Exposure on the Lung Fibroblastic Response after Influenza Pneumonia.

Influenza viruses can result in significant lung injury with significant morbidity and mortality. In this study, we evaluated the impact of cigarette smoke (CS) exposure on the pulmonary fibroblastic response after influenza infection. We used a murine model in which animals were exposed to CS or room air and subsequently infected with H1N1 influenza virus. Inflammatory and fibrotic responses were measured at different time points after influenza infection. Primary fibroblasts were isolated from the lungs of mice and their characteristics were evaluated. Exposure to CS significantly increased the amount of collagen in the lungs of mice infected with influenza virus compared with the nonsmoking group at 30 days after infection. Furthermore, the presence of fibroblast-specific protein-positive cells increased in the lungs of influenza-infected mice that were exposed to CS compared with the infection-alone group. The smoking group also showed delays in weight recovery and higher cell counts in BAL fluid after infection. Active transforming growth factor ß1 levels in BAL fluid increased in both groups; however, CS-exposed mice had a later surge in active transforming growth factor ß1 (Day 24). Ex vivo cultures of lung-derived fibroblasts from CS-exposed mice with influenza infection showed rapid proliferation, increased expression of α-smooth muscle actin-stained stress fibers, and higher expression of growth factors compared with fibroblasts from room air-exposed lungs after infection. These results suggest that CS exposure changes the fibroblastic potential, leading to increased fibrosis after influenza infection.

Synthesis and Electroresponse Activity of Porous Polypyrrole/Silica-Titania Core/Shell Nanoparticles.

Inverted conducting polymer/metal oxide core/shell structured pPPy/SiO2-TiO2 nanoparticles were prepared as electrorheological (ER) materials using sequential experimental methods. The core was synthesized via the low-temperature self-assembly of PPy and SiO2 materials, and the outer TiO2 shell was easily coated onto the core part using a sol-gel method and a titanium isopropoxide precursor. Sonication-mediated etching and redeposition were employed to etch out SiO2 portions from the core part to blend with TiO2 shells. Each step in nanoparticle synthesis involved morphological and physical changes to the surface area and porosity, with subsequent changes in the intrinsic properties of the materials. Specifically, the electrical conductivity and dielectric properties were successfully altered. The final pPPy/SiO2-TiO2 nanoparticle configuration was optimized for ER applications, offering low electrical conductivity, high dielectric properties, and increased dispersion stability. pPPy/SiO2-TiO2 nanoparticles exhibited 24.7- and 2.7-fold enhancements in ER performance compared to that of PPy-SiO2 and PPy-SiO2/TiO2 precursor nanoparticles, respectively. The versatile method proposed in this study for the synthesis of inverted conducting polymer/metal oxide core/shell nanoparticles shows great potential for the development of custom-designed ER materials.

Graphene Oxide Wrapped SiO2 /TiO2 Hollow Nanoparticles Loaded with Photosensitizer for Photothermal and Photodynamic Combination Therapy.

Graphene oxide (GO) enwrapped SiO2 /TiO2 hollow nanoparticles (GO-HNP) are synthesized by the Stöber method and used as a nanocarrier for loading protoporphyrin IX (PpIX). The synthesized nanoparticle has high dispersibility and high uniformity in diameter (ca. 50 nm). Furthermore, this nanoparticle shows λ=808 nm laser induced PpIX release properties (photoinduced "on-off" drug-release system). GO-HNP-PpIX is employed for inducing both photothermal therapy (PTT) and photodynamic therapy (PDT). The synergic effect of PTT and PDT exhibits powerful anticancer properties. When cancer cells are treated with GO-HNP-PpIX and irradiated with both visible light and a NIR laser, the cell viability drops dramatically to 2.5 %, which is an anticancer effect approximately 13 times higher than that obtained in a previous study. Moreover, no significant cell damage has been observed under λ=808 nm laser irradiation. The GO-HNP-PpIX system suggests an external stimuli-responsive efficient anticancer treatment effect toward human breast cancer cells.

Role of Chitinase 3-Like-1 in Interleukin-18-Induced Pulmonary Type 1, Type 2, and Type 17 Inflammation; Alveolar Destruction; and Airway Fibrosis in the Murine Lung.

Chitinase 3-like 1 (Chi3l1), which is also called YKL-40 in humans and BRP-39 in mice, is the prototypic chitinase-like protein. Recent studies have highlighted its impressive ability to regulate the nature of tissue inflammation and the magnitude of tissue injury and fibroproliferative repair. This can be appreciated in studies that highlight its induction after cigarette smoke exposure, during which it inhibits alveolar destruction and the genesis of pulmonary emphysema. IL-18 is also known to be induced and activated by cigarette smoke, and, in murine models, the IL-18 pathway has been shown to be necessary and sufficient to generate chronic obstructive pulmonary disease-like inflammation, fibrosis, and tissue destruction. However, the relationship between Chi3l1 and IL-18 has not been defined. To address this issue we characterized the expression of Chi3l1/BRP-39 in control and lung-targeted IL-18 transgenic mice. We also characterized the effects of transgenic IL-18 in mice with wild-type and null Chi3l1 loci. The former studies demonstrated that IL-18 is a potent stimulator of Chi3l1/BRP-39 and that this stimulation is mediated via IFN-γ-, IL-13-, and IL-17A-dependent mechanisms. The latter studies demonstrated that, in the absence of Chi3l1/BRP-39, IL-18 induced type 2 and type 17 inflammation and fibrotic airway remodeling were significantly ameliorated, whereas type 1 inflammation, emphysematous alveolar destruction, and the expression of cytotoxic T lymphocyte perforin, granzyme, and retinoic acid early transcript 1 expression were enhanced. These studies demonstrate that IL-18 is a potent stimulator of Chi3l1 and that Chi3l1 is an important mediator of IL-18-induced inflammatory, fibrotic, alveolar remodeling, and cytotoxic responses.

Designing a highly near infrared-reflective black nanoparticles for autonomous driving based on the refractive index and principle.

HYPOTHESIS: The development of highly NIR reflective black single-shell hollow nanoparticles (BSS-HNPs) can overcome the Light Detection and Ranging (LiDAR) sensor limitations of dark-tone materials. The crystalline phase of TiO2 and the refractive index can be controlled by calcination temperature. The formation of hollow structure and the refractive index is expected to simultaneously increase the light reflection and LiDAR detectability. EXPERIMENTS: The BSS-HNPs are synthesized using the sol-gel method, calcination, NaBH4 reduction, and etching to form a hollow structure with true blackness. The computational bandgap calculation is conducted to determine the bandgap energy (Eg) of the white and black TiO2 with different crystalline structures. The blackness of the as-synthesized materials is determined by the Commission on Illumination (CIE) L*a*b* color system. FINDINGS: The hydrophilic nature of BSS-HNPs enables the formulation of hydrophilic paints, allowing the mono-layer coating. With the synergistic effects of hollow structure and the refractive index, BSS-HNPs manifested superb NIR reflectance at LiDAR detection wavelengths. The high detectability, blackness, and hollow structure of BSS-HNPs can expand the variety of LiDAR-detectable dark-tone materials.

Advanced Flexible Physical Sensors with Independent Detection Mechanisms of Pressure and Strain Stimuli for Overcoming Signal Interference.

Flexible and wearable physical sensors have gained significant interest owing to their potential in attachable devices, electronic skin, and multipurpose sensors. The physical stimuli of these sensors typically consist of vertically and horizontally applied pressures and strains, respectively. However, owing to their similar response characteristics, interference occurs between the two types of signals detected, complicating the distinction between pressure and strain stimuli, leading to inaccurate data interpretation and reduced sensor specificity. Therefore, we developed a dual-sensing-mode physical sensor with separate response mechanisms for the two types of physical stimuli based on a unique structural design that can independently induce changes in the piezocapacitance and piezoresistance for pressure and strain stimuli, respectively. The asterisk-shaped piezoresistive pathway (electrode), designed for multifunctionality, effectively detected the intensity and direction of tensile deformation, and an elastomeric sponge structure positioned between the two electrodes detected the pressure signals via changes in capacitance. This dual-sensing-mode sensor offers clearer signal differentiation and enhanced multifunctionality compared to those of traditional single-mode sensors. Additionally, extensive experimentation demonstrated that our sensor has a good sensitivity, high linearity, and stability in detecting signals, proving its applicability for sophisticated monitoring and control tasks that require the differential detection between pressure and deformation signals.

Vivid-Colored Electrorheological fluids with simultaneous enhancements in color clarity and Electro-Responsivity.

HYPOTHESIS: Surface modification of dielectric materials changes the dipole-dipole interactions under electric fields, thereby controlling the electrorheological (ER) response. The introduction of metal oxides onto mica templates and further coating of dyes is expected to simultaneously improve the color clarity and ER performance. EXPERIMENTS: Dye-coated TiO2 platelets on mica are synthesized for high-performance colorful ER fluids. A sol-gel method is utilized to grow TiO2 on mica to prepare precursor light-colored mica/TiO2 materials, which are coated with appropriate dyes to enhance the vividness as determined by the Commission Internationale de clairage L*a*b* color system. The color expression and color clarity improvement are explained via the light interference effect and the presence of chromophores. FINDINGS: The uniform TiO2 layers can be obtained under low pH conditions with controlled nucleation kinetics. The addition of dyes to TiO2 increases the surface area and porosity of ER materials and introduces heteroatoms that act as positive factors. In practical ER applications, dye-coated TiO2-based ER fluids exhibit higher ER performances compared with the corresponding light-colored TiO2-based ER fluids. The vivid-colored ER fluids could provide an easy selection for a wide range of rheological systems requiring a specific magnitude of stress by confirming the color.

Designing Novel LiDAR-Detectable Plate-Type Materials: Synthesis, Chemistry, and Practical Application for Autonomous Working Environment.

Plate-type hollow black TiO2 (HL/BT) with a high NIR reflectance was fabricated for the first time as a LiDAR-detectable black material. A TiO2 layer was formed on commercial-grade glass by using the sol-gel method to obtain a plate-type structure. The glass template was then etched with hydrofluoric acid to form a hollow structure, and blackness was further achieved through NaBH4 reduction, which altered the oxidation state of TiO2 to black TixO2x-1 or Ti4+ to Ti3+ and Ti2+. The blackness of the HL/BT material was maintained by a novel approach that involved etching prior to reduction. The thickness of the TiO2 layer was controlled to maximize the NIR reflectance when applied as paint. The HL/BT material with a thickness of 140 nm (HL/BT140) showed a blackness (L*) of 13.3 and high NIR reflectance of 23.6% at a wavelength of 905 nm. This is attributed to the effective light reflection at the interface created by the TiO2 layer and the hollow structure. Plate-type HL/BT140 provides excellent spreadability, durability, and thermal stability in practical paint applications compared with sphere-type materials due to the higher contacting area to the applied surface, making it suitable for use as a LiDAR-detectable inorganic black pigment in autonomous environments.

Polyaniline-Coated Mesoporous Carbon Nanosheets with Fast Capacitive Energy Storage in Symmetric Supercapacitors.

Polyaniline-capped mesoporous carbon nanosheets with high conductivity and porosity are synthesized by vapor deposition polymerization. The mesoporous carbon template is prepared by removing ordered cubic iron oxide nanocrystals embedded in the carbon matrix obtained by thermal decomposition of an iron-oleate complex in a sodium chloride matrix. The evaporated aniline monomers are slowly polymerized on the carbon surface pretreated with FeCl3 as an initiator, partially filling the carbon pores to improve conductivity. The resulting products exhibit efficient hybrid energy storage mechanisms of electric double-layer capacitance and pseudocapacitance. When the nanosheets are assembled for a symmetric supercapacitor, the device capacitance reaches 107.8 F g-1 , at a current density of 0.5 A g-1 , and a capacitance retention of 69.6% is achieved at a ten times higher current density of 5 A g-1 . Electrochemical impedance spectroscopy reveals that the transition from resistive to capacitive behavior occurs within 0.63 s, indicating that fast ion and charge transport results in high capacitance and rate capability. The corresponding energy and power densities are 9.59 Wh kg-1 and 200.1 W kg-1 at a current density of 0.5 A g-1 , demonstrating efficient energy storage in a symmetric supercapacitor.

Fabrication of Flexible All-Solid-State Asymmetric Supercapacitor Device via Full Recycling of Heated Tobacco Waste Assisted by PLA Gelation Template Method.

In this study, a flexible all-solid-state asymmetric supercapacitor (FASC) device has been successfully fabricated via full recycling of heated tobacco waste (HTW). Tobacco leaves and cellulose acetate tubes have been successfully carbonized (HTW-C) and mixed with metal oxides (MnO2 and Fe3O4) to obtain highly active materials for supercapacitors. Moreover, poly(lactic acid) (PLA) filters have been successfully dissolved in an organic solvent and mixed with the as-prepared active materials using a simple paste mixing method. In addition, flexible MnO2- and Fe3O4-mixed HTW-C/PLA electrodes (C-MnO2/PLA and C-Fe3O4/PLA) have been successfully fabricated using the drop-casting method. The as-synthesized flexible C-MnO2/PLA and C-Fe3O4/PLA electrodes have exhibited excellent electrical conductivity of 378 and 660 µS cm-1, and high specific capacitance of 34.8 and 47.9 mF cm-2 at 1 mA cm-2, respectively. A practical FASC device (C-MnO2/PLA//C-Fe3O4/PLA) has been assembled by employing the C-MnO2/PLA as the positive electrode and C-Fe3O4/PLA as the negative electrode. The as-prepared FASC device showed a remarkable capacitance of 5.80 mF cm-2 at 1 mA cm-2. Additionally, the FASC device manifests stable electrochemical performance under harsh bending conditions, verifying the superb flexibility and sustainability of the device. To the best of our knowledge, this is the first study to report complete recycling of heated tobacco waste to prepare the practical FASC devices. With excellent electrochemical performance, the experiments described in this study successfully demonstrate the possibility of recycling new types of biomass in the future.

Facile Enhancement of Electrochemical Performance of Solid-State Supercapacitor via Atmospheric Plasma Treatment on PVA-Based Gel-Polymer Electrolyte.

A facile oxygen (O2) atmospheric plasma treatment is applied to a polyvinyl alcohol (PVA) matrix to enhance its wettability and hydrophilicity. The optimal plasma treatment conditions are determined by varying the applied plasma power and plasma treatment time. A PVA matrix treated with a plasma power of 120 W for 5 s shows the most hydrophilicity owing to successful formation of carbonyl (-CO, >C=O) functional groups without any structural degradation. The plasma-treated PVA matrix is used as the gel-polymer electrolyte of a solid-state supercapacitor (SSC) by immersing solid matrix into various liquid electrolytes, such as sodium sulfate (Na2SO4), sulfuric acid (H2SO4), and potassium hydroxide (KOH). Compared with the pristine PVA-based device, PVA-120W5/Na2SO4-, PVA-120W5/H2SO4-, and PVA-120W5/KOH-based SSCs show 2.03, 2.05, and 2.14 times higher specific capacitances, respectively. The plasma-treated PVA matrix shows increased specific capacitance owing to the increased wettability, which in turn increases the ion transportation and reduces the electrical resistance. This study successfully demonstrates that the electrochemical performance of a SSC can be readily enhanced through plasma treatment for a short time (≤5 s).

3D Hierarchically Structured Tin Oxide and Iron Oxide-Embedded Carbon Nanofiber with Outermost Polypyrrole Layer for High-Performance Asymmetric Supercapacitor.

Herein, unique three-dimensional (3D) hierarchically structured carbon nanofiber (CNF)/metal oxide/conducting polymer composite materials were successfully synthesized by combinations of various experimental methods. Firstly, base CNFs were synthesized by carbonization of electrospun PAN/PVP fibers to attain electric double-layer capacitor (EDLC) characteristics. To further enhance the capacitance, tin oxide (SnO2) and iron oxide (Fe2O3) were coated onto the CNFs via facile hydrothermal treatment. Finally, polypyrrole (PPy) was introduced as the outermost layer by a dispersion polymerization method under static condition to obtain 3D-structured CNF/SnO2/PPy and CNF/Fe2O3/PPy materials. With each synthesis step, the morphology and dimension of materials were transformed, which also added the benign characteristic for supercapacitor application. For the practical application, as-synthesized CNF/SnO2/PPy and CNF/Fe2O3/PPy were applied as active materials for supercapacitor electrodes, and superb specific capacitances of 508.1 and 426.8 F g-1 (at 1 A g-1) were obtained (three-electrode system). Furthermore, an asymmetric supercapacitor (ASC) device was assembled using CNF/SnO2/PPy as the positive electrode and CNF/Fe2O3/PPy as the negative electrode. The resulting CNF/SnO2/PPy//CNF/Fe2O3/PPy device exhibited excellent specific capacitance of 101.2 F g-1 (at 1 A g-1). Notably, the ASC device displayed a long-term cyclability (at 2000 cycles) with a retention rate of 81.1%, compared to a CNF/SnO2//CNF/Fe2O3 device of 70.3% without an outermost PPy layer. By introducing the outermost PPy layer, metal oxide detachment from CNFs were prevented to facilitate long-term cyclability of electrodes. Accordingly, this study provides an effective method for manufacturing a high-performance and stable supercapacitor by utilizing unique 3D hierarchical materials, comprised of CNF, metal oxide, and conducting polymer.

Preparation of a High-Performance Asymmetric Supercapacitor by Recycling Aluminum Paper and Filter Components of Heated Tobacco.

In this study, Al paper and cellulose acetate (CA) filters derived from heated tobacco waste were successfully converted into current collectors and active materials for a supercapacitor device. Typically, heated tobacco contains electrically discontinuous Al paper. First, Al was extracted from the tobacco waste using HCl to produce Lewis acid (AlCl3). This acid was then used in an Al electrodeposition process utilizing the chloroaluminate ionic liquid reaction between the acid and the base (RCl) at room temperature. To enhance the conductivity, a supplementary coating of Al metal was applied to the Al paper through electrodeposition, thus re-establishing the electrical continuity of the discontinuous parts and forming an Al-coated current collector. Moreover, the CA filters were carbonized under a nitrogen atmosphere, yielding carbon precursors (C-CA) for the supercapacitor electrodes. To further enhance the electrochemical performance, nickel oxide (NiO) was incorporated into C-CA, resulting in C-CA@NiO with pseudocapacitance. The specific surface area of CA increased with carbonization and the subsequent incorporation of NiO. The as-synthesized C-CA and C-CA@NiO materials were applied to an Al-coated current collector to obtain C-CA- and C-CA@NiO-based electrodes, exhibiting stable electrochemical behavior in the voltage range of -1.0 to 0 V and 0 to 1.0 V, respectively. An asymmetric supercapacitor (ASC) device was assembled with C-CA@NiO and C-CA as the positive and negative electrodes, respectively. This ASC device demonstrated a high specific capacitance of 40.8 F g-1, while widening the operating voltage window to 2.0 V. The high electrochemical performance of the device is attributed to the successful Al electrodeposition, which facilitates the electrical conductivity and increased porosity of the C-CA@NiO and C-CA materials. To the best of our knowledge, this is a pioneering study in regards to the conversion of biomass waste into current collectors and active materials to fabricate a practical ASC device. Our findings highlight the potential of reusing Al paper and CA filters from heated tobacco waste as essential components of energy storage devices.

A Study on Enhanced Electrorheological Performance of Plate-like Materials via Percolation Gel-like Effect.

The use of plate-like materials to induce a percolation gel-like effect in electrorheological (ER) fluids is sparsely documented. Hence, we dispersed plate-like materials, namely natural mica, synthetic mica, and glass, as well as their pulverized particles, in various concentrations in silicone oil to form ER fluids. Subsequently, the rheological properties of the fluids were evaluated and compared to identify the threshold concentration for percolating a gel-like state. The shear stress and viscoelastic moduli under zero-field conditions confirmed that plate-like materials can be used to induce percolation gel-like effects in ER fluids. This is because of the high aspect ratio of the materials, which enhances their physical stability. In practical ER investigations, ER fluids based on synthetic mica (30.0 wt%) showed the highest yield stress of 516.2 Pa under an electric field strength of 3.0 kV mm-1. This was attributed to the formation of large-cluster networks and additional polarization induced by the ions. This study provides a practical approach for developing a new type of gel-like ER fluid.

Novel Approach to Synthesis of AgZnS and TiO2 Decorated on Reduced Graphene Oxide Ternary Nanocomposite for Hydrogen Evolution Effect of Enhanced Synergetic Factors.

In this work, a novel ternary nanocomposites AgZnS-TiO2-reduced graphene oxide (RGO) was successfully synthesized by a facile soft ultrasonic-reduction condition as low as 70 °C. During the ultrasound reaction, the reduction of GO and the growth of AgZnS and TiO2 crystals occurred simultaneously in conjunction with the deposition of AgZnS and TiO2 crystals onto the surface of the graphene. The synthesized nanocatalysts were characterized by XRD, SEM, TEM, EDX, Raman spectroscopy, XPS, UV-Vis DRS, photoluminescence spectrometer, and photocurrent and CV. The AgZnS-G-T was shown as catalytic HER with some synnegetic factors such as pH-universal, temperature, and ultrasonic condition. After 4 h, it was observed that AgZnS-TiO2-RGO has the highest efficiency of photocatalytic activity through hydrogen production by water splitting, which achieved the highest hydrogen evolution rate of 930.45 µmol/g at buffer solution (pH = 5), which was superior to AgZnS-G (790.1 µmole/g) and AgZnS (701.2 µmole/g). Such a significant hydrogen evolution amount far exceeded that of undoped TiO2 and RGO. The H2 evolution amounts increased significantly at ultrasonic irradiation power of 80 MHz. AgZnS-G-T demonstrates the higher H2 evolution amounts of 985 µmole/g at 80 MHz. Its photocatalytic hydrogen-evolution activity remained at a high level over four cycles (16 h) nanoparticle.

Hollow TiO2 Nanoparticles Capped with Polarizability-Tunable Conducting Polymers for Improved Electrorheological Activity.

Hollow TiO2 nanoparticles (HNPs) capped with conducting polymers, such as polythiophene (PT), polypyrrole (PPy), and polyaniline (PANI), have been studied to be used as polarizability-tunable electrorheological (ER) fluids. The hollow shape of TiO2 nanoparticles, achieved by the removal of the SiO2 template, offers colloidal dispersion stability in silicone oil owing to the high number density. Conducting polymer shells, introduced on the nanoparticle surface using vapor deposition polymerization method, improve the yield stress of the corresponding ER fluids in the order of PANI < PPy < PT. PT-HNPs exhibited the highest yield stress of ca. 94.2 Pa, which is 5.0-, 1.5-, and 9.6-times higher than that of PANI-, PPy-, and bare HNPs, respectively. The improved ER response upon tuning with polymer shells is attributed to the space charge contribution arising from the movement of the charge carriers trapped by the heterogeneous interface. The ER response of studied ER fluids is consistent with the corresponding polarizability results as indicated by the permittivity and electrophoretic mobility measurements. In conclusion, the synergistic effect of hollow nanostructures and conducting polymer capping effectively enhanced the ER performance.

Development of Novel Colorful Electrorheological Fluids.

Herein, the electrorheological (ER) performances of ER fluids were correlated with their colors to allow for the visual selection of the appropriate fluid for a specific application using naked eyes. A series of TiO2-coated synthetic mica materials colored white, yellow, red, violet, blue, and green (referred to as color mica/TiO2 materials) were fabricated via a facile sol-gel method. The colors were controlled by varying the thickness of the TiO2 coating layer, as the coatings with different thicknesses exhibited different light interference effects. The synthesized color mica/TiO2 materials were mixed with silicone oil to prepare colored ER fluids. The ER performances of the fluids decreased with increasing thickness of the TiO2 layer in the order of white, yellow, red, violet, blue, and green materials. The ER performance of differently colored ER fluids was also affected by the electrical conductivity, dispersion stability, and concentrations of Na+ and Ca2+ ions. This pioneering study may provide a practical strategy for developing new ER fluid systems in future.

Synthesis of LiDAR-Detectable True Black Core/Shell Nanomaterial and Its Practical Use in LiDAR Applications.

Light detection and ranging (LiDAR) sensors utilize a near-infrared (NIR) laser with a wavelength of 905 nm. However, LiDAR sensors have weakness in detecting black or dark-tone materials with light-absorbing properties. In this study, SiO2/black TiO2 core/shell nanoparticles (SBT CSNs) were designed as LiDAR-detectable black materials. The SBT CSNs, with sizes of 140, 170, and 200 nm, were fabricated by a series of Stöber, TTIP sol-gel, and modified NaBH4 reduction methods. These SBT CSNs are detectable by a LiDAR sensor and, owing to their core/shell structure with intrapores on the shell (ca. 2−6 nm), they can effectively function as both color and NIR-reflective materials. Moreover, the LiDAR-detectable SBT CSNs exhibited high NIR reflectance (28.2 R%) in a monolayer system and true blackness (L* < 20), along with ecofriendliness and hydrophilicity, making them highly suitable for use in autonomous vehicles.