Cranial Suture Regeneration Mitigates Skull and Neurocognitive Defects in Craniosynostosis.

Craniosynostosis results from premature fusion of the cranial suture(s), which contain mesenchymal stem cells (MSCs) that are crucial for calvarial expansion in coordination with brain growth. Infants with craniosynostosis have skull dysmorphology, increased intracranial pressure, and complications such as neurocognitive impairment that compromise quality of life. Animal models recapitulating these phenotypes are lacking, hampering development of urgently needed innovative therapies. Here, we show that Twist1+/- mice with craniosynostosis have increased intracranial pressure and neurocognitive behavioral abnormalities, recapitulating features of human Saethre-Chotzen syndrome. Using a biodegradable material combined with MSCs, we successfully regenerated a functional cranial suture that corrects skull deformity, normalizes intracranial pressure, and rescues neurocognitive behavior deficits. The regenerated suture creates a niche into which endogenous MSCs migrated, sustaining calvarial bone homeostasis and repair. MSC-based cranial suture regeneration offers a paradigm shift in treatment to reverse skull and neurocognitive abnormalities in this devastating disease.

Odontogenic infections in the antibiotic era: approach to diagnosis, management, and prevention.

PURPOSE: The prevalence of odontogenic infections remains one of the highest in the world. If untreated, odontogenic infections can break through the limitation, disseminate to other organs or spaces, and cause high mortality rates. However, it is still difficult to rapidly target limited or disseminated infections in clinical practice. The type of disseminated odontogenic infections and the responsible bacteria have not been described in detail. METHODS: Search databases (e.g., PubMed, MEDLINE, Web of Science, Embase) for reports published from 2018.1 to 2022.9. Use search strategies: ("odontogenic infections" OR "pulpitis" OR "periapical lesions" OR "periodontal diseases") AND ("disseminated infections" OR "complication"). RESULTS: Fourteen different types of disseminated odontogenic infections, most of which are polymicrobial infections, can spread through the body either direct or through hematogenous diffusion. Multiple microbial infections can be more invasive in the transmission of infection. Secondary infections are commonly associated with bacteria like Fusobacterium spp., Streptococcus spp., Peptostreptococcus spp., Prevotella spp., and Staphylococcus spp. Antibiotics with broad-spectrum activity are fundamental as first-line antimicrobial agents based on the microorganisms isolated from disseminated infections. CONCLUSION: This review elaborates on the epidemiology, microorganisms, risk factors, and dissemination routes, and provides evidence-based opinions on the diagnosis, multidisciplinary management, and prevention of odontogenic infections for dentists and clinicians.

Clinical accuracy of partially guided implant placement in edentulous patients: A computed tomography-based retrospective study.

OBJECTIVES: This retrospective study was intended to evaluate the clinical accuracy of partially guided template in guiding implant placement in edentulous patients. METHODS: A total of 120 implants were placed in 24 patients with at least one completely edentulous arch with a partially guided system. Based on CBCT data, a repeatable method was used to measure linear and angular deviations of implants at 3D level in Mimics medical software. The influence of supporting tissue and implant region on the accuracy was assessed, followed by the evaluation of direction of linear deviations in biologically vital areas. RESULTS: Linear deviations of all implants were 1.91 ± 0.68 mm, 1.47 ± 0.68 mm, and 1.02 ± 0.69 mm at apical, apical lateral, and apical vertical levels. When at the cervical, cervical lateral, and cervical vertical levels, the linear deviations were 1.53 ± 0.65 mm, 0.98 ± 0.53 mm, and 1.01 ± 0.69 mm, respectively. Angular deviation of all implants was 7.14 ± 3.41°. Implants guided by mucosa + tooth-supported templates showed higher linear deviations at apical vertical level (1.21 ± 0.72 mm vs. 0.86 ± 0.63 mm, p < .05) and cervical vertical level (1.18 ± 0.72 mm vs. 0.87 ± 0.63 mm, p < .05) than mucosa-supported templates, and implants in maxilla were found higher angular deviation than mandible (7.89 ± 3.61° vs. 6.29 ± 2.97°, p < .05). CONCLUSIONS: The partially guided template served as clinically viable surgical assistance in implant placement in edentulous patients. When using mucosa + tooth-supported template or placing implants in maxilla, more caution was required, especially in biologically vital areas.

Developing a universal and reliable temporomandibular joint reference system for quantifying morphological and positional changes.

OBJECTIVES: This study aimed to provide a universal and reliable reference system quantifying temporomandibular joint (TMJ) morphological and positional changes. METHODS: Large field-of-view (FOV) cone-beam computed tomography (CBCT) images (20 TMJs) from 10 preorthognathic surgery patients and limited FOV CBCT images (40 TMJs) from 20 splint therapy-treated patients with temporomandibular disorders were collected. TMJ-specific reference system including a TMJ horizontal reference plane (TMJHP) and a local coordinate system (TMJCS) was constructed with landmarks on cranial base. Its application for TMJ measurements and its spatial relationship to common Frankfort horizontal plane (FHP) and maxillofacial coordinate system (MFCS) were evaluated. RESULTS: Five relevant landmarks were selected to optimally construct TMJ-specific reference system. General parallelism between TMJHP and FHP was demonstrated by minimal angular and constant distance deviation (1.714 ±â€…0.811º; 2.925 ±â€…0.817 mm). Additionally, tiny axial orientational deviations (0.181 ±â€…6.805º) suggested TMJCS rivaled MFCS. Moreover, small deviations in orientations and distances (1.232 ±â€…0.609º; 0.310 ±â€…0.202 mm) indicated considerable reliability for TMJCS construction, with intraclass correlation coefficients (ICCs) ranging from 0.999 to 1.000. Lastly, slight discrepancies in translations and rotations revealed high reliability for condylar positional and morphological measurements (ICC, 0.918-0.999). LIMITATIONS: TMJ-specific reference system was merely tested in two representative FOVs. CONCLUSIONS: This study provides a universal and reliable reference system for TMJ assessment that is applicable to both limited and large FOV CBCT. It would improve comparability among diverse studies and enable comprehensive evaluations of TMJ positional and morphological changes during TMJ-related treatment follow-up such as splint therapy and disease progression.

Comparative evaluation of transverse width indices for diagnosing maxillary transverse deficiency.

OBJECTIVES: This study aimed to compare and evaluate different transverse width indices for diagnosing maxillary transverse deficiency (MTD), a common malocclusion characterized by uncoordinated dental arches, crossbites, and tooth crowding. MATERIALS AND METHODS: Sixty patients aged 7-12 years were included in the study, with 20 patients diagnosed with MTD and 40 normal controls. Transverse width indices, including maxillary width at the buccal alveolar crest and lingual midroot level, as well as at the jugal process width, were measured. Differences between these indices and their corresponding mandibular indices were used as standardized transverse width indices. The reference range of these indices was determined and evaluated. Receiver operating characteristic (ROC) analysis was performed to evaluate their diagnostic ability. RESULTS: The transverse width indices and standardized transverse width indices of the MTD group were significantly smaller than those of the control group, except for the jugal process width. The evaluation of the reference range and ROC analysis revealed that the difference of the maxillomandibular width at buccal alveolar crest was the most accurate diagnostic method. CONCLUSIONS: The jugal point analysis method may not be suitable for diagnosing MTD. Instead, measuring the difference in maxillomandibular width at the buccal alveolar crest proves to be a more reliable and accurate diagnostic method for MTD.

[Anatomy and function of the canalis sinuosus and its injury prevention and treatment strategies in implant surgery]. / çª¦ç®¡çš„è§£å‰–å’ŒåŠŸèƒ½åŠå ¶åœ¨ç§æ¤æœ¯ä¸­æŸä¼¤çš„é˜²æ²»ç­–ç•¥.

The canalis sinuosus, a canal containing the anterior superior alveolar nerve bundle, originates from the infraorbital canal and extends along the maxillary sinus and nasal cavity edges to the anterior maxilla. It was once regarded as an anatomical variation. However, with the widespread application of cone beam computed tomography (CBCT), the detection rate of canalis sinuosus in the population has increased. The canalis sinuosus exhibits diverse courses, branching into multiple accessory canals and terminating at the nasal floor or the anterior tooth region, with the majority traversing the palatal side of the central incisor. The anterior superior alveolar nerve bundle within the canalis sinuosus not only innervates and nourishes the maxillary anterior teeth and the corresponding soft tissues, and the maxillary sinus mucosa, but also relates to the nasal septum, lateral nasal wall, and parts of the palatal mucosa. To minimize surgical complications, strategies for preventing and treating canalis sinuosus injuries need to be investigated. Preoperatively, CBCT is used to identify the canalis sinuosus and to virtually design implant placement at a distance of more than 2 mm from the canalis sinuosus. Intraoperatively, assessing bleeding and patient comfort, complemented by precision surgical techniques such as the use of implant surgical guide plates. Postoperatively, CBCT is used to examine the relationship between the implant and the canalis sinuosus, and treatment of canalis sinuosus injuries can be tailored based on the patient's symptoms. This review summarizes the detection of canalis sinuosus in the population, its anatomical characteristics, and the physiological functions in the anterior maxilla, and discusses strategies for avoiding canalis sinuosus injuries during implant surgery, thereby enhancing clinical awareness and providing references for clinical decision-making.

[Strategies for prevention and treatment of vascular and nerve injuries in mandibular anterior implant surgery]. / 下颌前牙区种植术后血管神经损伤防治策略.

Important anatomical structures such as mandibular incisive canal, tongue foramen, and mouth floor vessels may be damaged during implant surgery in the mandibular anterior region, which may lead to mouth floor hematoma, asphyxia, pain, paresthesia and other symptoms. In severe cases, this can be life-threatening. The insufficient alveolar bone space and the anatomical variation of blood vessels and nerves in the mandibular anterior region increase the risk of blood vessel and nerve injury during implant surgery. In case of vascular injury, airway control and hemostasis should be performed, and in case of nerve injury, implant removal and early medical treatment should be performed. To avoid vascular and nerve injury during implant surgery in the mandibular anterior region, it is necessary to be familiar with the anatomical structure, take cone-beam computed tomography, design properly before surgery, and use digital technology during surgery to achieve accurate implant placement. This article summarizes the anatomical structure of the mandibular anterior region, discusses the prevention strategies of vascular and nerve injuries in this region, and discusses the treatment methods after the occurrence of vascular and nerve injuries, to provide clinical reference.

Co-occurring Medical Multimorbidity, Mental Illness, and Substance Use Disorders Among Older Criminal Legal System-Involved Veterans.

BACKGROUND: Older veterans involved in the criminal legal system (CLS) may have patterns of multimorbidity that place them at risk for poor health outcomes. OBJECTIVES: To estimate the prevalence of medical multimorbidity (≥2 chronic medical diseases), substance use disorders (SUDs), and mental illness among CLS-involved veterans aged 50 and older. RESEARCH DESIGN: Using Veterans Health Administration health records, we estimated the prevalence of mental illness, SUD, medical multimorbidity, and the co-occurrence of these conditions among veterans by CLS involvement as indicated by Veterans Justice Programs encounters. Multivariable logistic regression models assessed the association between CLS involvement, the odds for each condition, and the co-occurrence of conditions. SUBJECTS: Veterans aged 50 and older who received services at Veterans Health Administration facilities in 2019 (n=4,669,447). METHODS: Mental illness, SUD, medical multimorbidity. RESULTS: An estimated 0.5% (n=24,973) of veterans aged 50 and older had CLS involvement. For individual conditions, veterans with CLS involvement had a lower prevalence of medical multimorbidity compared with veterans without but had a higher prevalence of all mental illnesses and SUDs. After adjusting for demographic factors, CLS involvement remained associated with concurrent mental illness and SUD (adjusted odds ratio [aOR] 5.52, 95% CI=5.35-5.69), SUD and medical multimorbidity (aOR=2.09, 95% CI=2.04-2.15), mental illness and medical multimorbidity (aOR=1.04, 95% CI=1.01-1.06), and having all 3 simultaneously (aOR=2.42, 95% CI=2.35-2.49). CONCLUSIONS: Older veterans involved in the CLS are at high risk for co-occurring mental illness, SUDs, and medical multimorbidity, all of which require appropriate care and treatment. Integrated care rather than disease-specific care is imperative for this population.

Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years.

STATEMENT OF PROBLEM: Recent systematic reviews have reported resorption of bone grafts after augmentation, but the influencing factors are numerous and uncertain. Different brands of bone graft and other factors may affect the bone formation effect after sinus floor augmentation. PURPOSE: The purpose of this retrospective clinical study was to evaluate the graft material height changes after sinus floor augmentation with cone beam computed tomography (CBCT) and to investigate the potential influencing factors related to graft resorption. MATERIAL AND METHODS: Four midsagittal cut CBCT images of 157 posterior maxillary implants after maxillary sinus floor elevation by using the lateral window approach with bone grafts from 116 patients were obtained. Four CBCT scans had been performed immediately (T0), 6 months (T1) and 12 months after bone grafting (T2), and 1.5 to 2 years after treatment (T3), and the distance between the implant platform and the grafted mucosa of the maxillary sinus floor was measured at 3 locations. Correlation coefficients of these parameters were calculated. A linear mixed model was used to investigate potential factors influencing graft height reduction, including the patient's sex, age, smoking status, periodontal status, graft brand, implant site, implant level, placement time, and residual bone height. RESULTS: Mean ±standard deviation graft height at the mesial side of the implant (MeGH) was significantly decreased by 0.32 ±0.88 mm in the first 6 months, was gradually reduced after 6 months (0.26 ±0.43 mm), and then 1 to 2 years later increased to 0.39 ±0.97 mm. The changes in graft height at the center of the implant (CeGH) and graft height at the distal side (DiGH) groups were similar to those in the MeGH group. A significantly positive correlation was found among the height alterations in 3 locations (rs=0.954, P<.001). The linear mixed model showed that smoking was more likely to cause graft height reduction in MeGH (P=.034). CONCLUSIONS: Graft height significantly decreased after maxillary sinus augmentation over 1 to 2 years. Smoking had a negative effect on graft height changes, while the 2 brands of graft and other factors had no significant effect.

Multifocal epithelial hyperplasia confined to the interdental papilla of an adult Chinese man: a rare case report and literature review.

BACKGROUND: Multifocal epithelial hyperplasia (MEH), or focal epithelial hypertension (FEH), or Heck's disease, is an uncommon, benign oral mucosal disease associated with human papillomavirus infection. It is mostly observed in indigenous populations of the world, and has been rarely reported in China. However, previous research suggested there might be a greater prevalence of MEH in the Chinese population. While predominantly involves the lips, buccal mucosa and tongue, MEH was occasionally reported to affect the hard palate and gingiva as well. CASE PRESENTATION: This paper reports a case of extensive MEH lesions that confined to the interdental papilla of a Chinese male without detection of HPV, and summarizes the published gingiva-involved MEH reports from 1966 until present. The lesions were excised with an Er: YAG laser after scaling and root planning, no recurrence was observed after 6-month follow-up. CONCLUSIONS: The present report illustrates the need for clinicians to be aware of rare presentations of MEH to facilitate a prompt diagnosis and proper management. More reports are encouraged to determine a correct prevalence rate of MEH in China.

Pathogenic variant of DYNC2H1 associated with lingual hamartoma in a Chinese pedigree.

BACKGROUND: Molecular etiology of lingual hamartoma is poorly understood. This study aims to identify potentially deleterious mutations for lingual hamartoma and analyze its molecular profile by a combination of whole-exome sequencing and RNA-sequencing. METHODS: Whole-exome sequencing was conducted on the proband presenting lingual hamartoma and patient's unaffected family members. Potentially pathogenic mutations were identified after filtration. The pathogenicity of the identified variants was predicted by in silico algorithms and conservative analysis. RNA-sequencing was performed to further explore the molecular profile of lingual hamartoma. RESULTS: Whole-exome sequencing of the proband and patients' unaffected brother and parents identified a de novo mutation c.931C>T_p.Pro311Ser in the DYNC2H1 gene (NM_001080463.2). The DYNC2H1 mutation was predicted to be disease-causing for affecting highly conserved amino acid by PolyPhen2 and Mutation Taster. RNA-sequencing analysis showed that the DYNC2H1 gene was significantly down-regulated in lingual hamartoma. Gene set enrichment analysis revealed cilium assembly and Hedgehog signaling pathway were significantly affected. CONCLUSION: The study expanded our knowledge on the clinical and genetic spectrum of lingual hamartoma by identifying causal variants in a Chinese pedigree. DYNC2H1 is likely to participate in tongue development and its pathologic mutation may underlie the etiology of lingual hamartoma.

Application of WeChat-based flipped classroom on root canal filling teaching in a preclinical endodontic course.

BACKGROUND: This study was aimed to evaluate the application of WeChat-based flipped classroom in root canal filling teaching in a preclinical endodontic course. METHODS: A two-group comparative study was designed. The pre-class test, on-site quiz, and root canal filling on extracted premolars were performed by students from a lecture-based classroom group (LG, n = 30) and a WeChat-based flipped classroom group (WFG, n = 30). Results of the Pre-class test and on-site quiz were analyzed by independent samples t-test. Post-filling radiographs were taken and evaluated by a specialist in oral radiology who was blinded to grouping. Results of root canal fillings were analyzed by the Pearson chi-square test. Student responses in questionnaires were analyzed by Fisher's exact test. RESULTS: The students in WFG could get significantly higher scores in the on-site test and make better performances in root canal filling than those in LG. In terms of questionnaires, students from WFG were perceived to be more motivated to learn, better to understand the knowledge, better to improve communication and clinical skills, easier to perform root canal filling but spending more time. CONCLUSION: The WeChat-based flipped classroom teaching can have a better effect than lecture-based teaching on root canal filling learning for students with limited endodontic experiences.

Using the anterior cranial base to provide a reliable reference plane for patients with or without facial asymmetry.

INTRODUCTION: This study aimed to investigate the midsagittal reference plane (MSP) reliability derived from the 3-dimensional characteristics of patients with or without facial asymmetry in the anterior cranial base (ACB). METHODS: We divided the cone-beam computed tomography (CBCT) images of 60 adult patients into maxillofacial symmetry and asymmetry groups. The ACB models were 3-dimensionally constructed, and then symmetrical characteristics were evaluated with surface asymmetry for each group. The reliability of the MSP derived from the symmetry of the anterior cranial base (MSPACB) was assessed in comparison with the true craniofacial symmetry plane determined using the morphometric method. RESULTS: The ACB was symmetrical, as demonstrated by slight surface asymmetry. The MSPACB was reliable for maxillofacial asymmetrical analysis as the intraobserver and interobserver measurements using the MSPACB were of excellent agreement, and there was no significant difference between MSPACB and morphometric method in asymmetrical measurements in both groups. The MSPACB remained stable (maximum deviation <0.32 mm) when cranial landmark identification errors (1 mm and 4 mm) were simulated. CONCLUSIONS: MSPACB is reliable for patients with or without facial asymmetry in maxillofacial asymmetry analysis, which is beneficial to patients with severe midfacial asymmetry or trauma when conventional landmarks are displaced or disappear. When using MSPACB for patients with cranial malformations or those whose ACBs differ from normal dimensions, caution should be taken.

EFFECTIVENESS OF INTRA-ARTICULAR INJECTIONS OF SODIUM HYALURONATE, CORTICOSTEROIDS, PLATELET-RICH PLASMA ON TEMPOROMANDIBULAR JOINT OSTEOARTHRITIS: A SYSTEMATIC REVIEW AND NETWORK META-ANALYSIS OF RANDOMIZED CONTROLLED TRIALS.

OBJECTIVE: To compare the efficacy of Intra-articular injections of corticosteroids (CCS), hyaluronic acid (HA), and platelet-rich plasma (PRP) on temporomandibular joint osteoarthritis. METHODS: Studies were identified from PubMed, Embase and Cochrane Central Register of Controlled Trials, ClinicalTrials.gov with date up to January 15, 2022. Randomized controlled trials included were the studies of patients with temporomandibular joint osteoarthritis who had intra-articular treatment with CCS, HA, PRP, placebo and follow-up assessing temporomandibular joint function in target outcome variables. The primary outcome was temporomandibular joint pain. The secondary outcomes were maximal mouth opening (mm), and lateral movement to the affected side (mm). This study is registered with PROSPERO, number CRD42021270914. RESULTS: Nine randomized controlled trials involving 316 patients were included. For primary pain outcome, no significance was detected when CCS, HA and PRP were compared with placebo by both short- (3-6 months) and long-term (>12 months) follow-up. Relatively, the top ranking of which was PRP in the long-term (Mean Difference, -0.23 [95% CI, -2.49 to 2.04]). In addition, these injectables did not significantly outperform placebo by evaluating secondary functional outcomes (maximal mouth opening and lateral movement) with the same follow-up. Subgroup analyses showed that the effect of CCS on subgroups with more than 70% women was statistically less effective compared with placebo (Mean Difference, 1.73 [95% CI, 0.37-3.09]). CONCLUSION: Evidence suggested that intra-articular pharmacological injections of CCS, HA, and PRP had no effect on improving temporomandibular joint pain and functional outcomes compared with placebo injection.

KLF2+ stemness maintains human mesenchymal stem cells in bone regeneration.

Mesenchymal stem cells (MSCs), which are undifferentiated stem cells with the property of stemness and the potential to differentiate into multiple lineages, including osteoblasts, have attracted a great deal of attention in bone tissue engineering. Consistent with the heterogeneity of MSCs, various surface markers have been used. However, it is still unclear which markers of MSCs are best for cell amplification in vitro and later bone regeneration in vivo. Krüppel-like Factor 2 (KLF2) is an important indicator of the stemness of human MSCs (hMSCs) and as early vascularization is also critical for bone regeneration, we used KLF2 as a novel in vitro marker for MSCs and investigated the angiogenesis and osteogenesis between KLF2+ MSCs and endothelial cells (ECs). We found a synergistic interaction between hMSCs and human umbilical vein ECs (HUVECs) in that KLF2+ stemness-maintained hMSCs initially promoted the angiogenesis of HUVECs, which in turn more efficiently stimulated the osteogenesis of hMSCs. In fact, KLF2+ hMSCs secreted angiogenic factors initially, with some of the cells then differentiating into pericytes through the PDGF-BB/PDGFR-ß signaling pathway, which improved blood vessel formation. The matured HUVECs in turn synergistically enhanced the osteogenesis of KLF2+ hMSCs through upregulated vascular endothelial growth factor. A three-dimensional coculture model using cell-laden gelatin methacrylate (GelMA) hydrogel further confirmed these results. This study provides insight into the stemness-directed synergistic interaction between hMSCs and HUVECs, and our results will have a profound impact on further strategies involving the application of KLF2+ hMSC/HUVEC-laden GelMA hydrogel in vascular network bioengineering and bone regeneration.

Changes in the surface topography and element proportion of clinically failed SLA implants after in vitro debridement by different methods.

OBJECTIVE: To evaluate the surface topography and element proportion changes in clinically failed implants after different modalities in vitro debridement and to compare the cleaning effect of different method combinations. MATERIAL AND METHODS: Thirty clinical failed implants were treated by different debridement methods in vitro as follows: Group 1: physiologic saline irrigation; Group 2: glycine powder air polishing; Group 3: glycine powder air polishing + ethylenediaminetetraacetic acid (EDTA); Group 4: polyetheretherketone (PEEK) tip ultrasonic scaling; and Group 5: PEEK tip ultrasonic scaling + EDTA. The relative contaminated area reduction (RCAR), visual analogue scale (VAS, the higher value means, the better cleaning effect) and surface roughness were assessed using scanning electron microscopy (SEM), stereoscopic microscopy (SM) and white light interferometry (WLI). Surface chemistry was determined by energy dispersive spectroscopy (EDS). RESULTS: Group 4 and Group 5 showed higher RCARs (82.90%, 82.89%), VAS scores (2.61, 2.33) and roughness reductions (-0.85 µm, -1.80 µm). Group 3 attained the highest decrease of C% (carbon, -26.67%), O% (oxygen, -13.71%) and N% (nitrogen, -5.66%), and the highest increase of Ti% (titanium, 49.67%). PEEK remnants were detected on the implant surface of Groups 4 and 5. CONCLUSION: Within the limitation of the present in vitro design, PEEK tip ultrasonic scaling was more effective in eliminating visible contamination, while glycine powder air polishing combined with EDTA treatment was more conducive to expose the original surface element distribution. Both methods have their own advantages in decontamination, but none of them could reconstruct the surface as the pristine implant.

Functional analysis of the ocnE gene involved in nicotine-degradation pathways in Ochrobactrum intermedium SCUEC4 and its enzymatic properties.

The SCUEC4 strain of Ochrobactrum intermedium is a newly isolated bacterium that degrades nicotine can use nicotine as the sole carbon source via a series of enzymatic catalytic processes. The mechanisms underlying nicotine degradation in this bacterium and the corresponding functional genes remain unclear. Here, we analyzed the function and biological properties of the ocnE gene involved in the nicotine-degradation pathways in strain SCUEC4. The ocnE gene was cloned by PCR with total DNA of strain SCUEC4 and used to construct the recombinant plasmid pET28a-ocnE. The overexpression of the OcnE protein was detected by SDS-PAGE analysis, and study of the function of this protein was spectrophotometrically carried out by monitoring the changes of 2,5-dihydroxypyridine. Moreover, the effects of temperature, pH, and metal ions on the biological activities of the OcnE protein were analyzed. The optimal conditions for the biological activities of OcnE, a protein of approximately 37.6 kDa, were determined to be 25 °C, pH 7.0, and 25 µmol/L Fe2+, and the suitable storage conditions for the OcnE protein were 0 °C and pH 7.0. In conclusion, the ocnE gene is responsible for the ability of 2,5-dihydroxypyridine dioxygenase. These findings will be beneficial in clarifying the mechanisms of nicotine degradation in O. intermedium SCUEC4.

The association between low birth weight and dental caries among 11-to-13-year-old school age children in Ningbo, China.

BACKGROUND: The association between low birth weight (LBW) and dental caries is currently unclear. The aim of this study was to investigate the association of LBW with dental caries in permanent teeth in children of Ningbo city. METHODS: A total of 1975 children aged 11-to-13 years in Ningbo, China were enrolled in this cross-sectional study. LBW was defined as a birthweight< 2500 g. Ten dentists assessed the status of dental caries in permanent teeth in line with the World Health Organization (WHO) criteria and guidelines. Decayed, missing or filled teeth were considered to have dental caries. Parental questionnaires were used to collect child information. Non-conditional logistic regression analysis was used to estimate odds ratios (ORs) and the corresponding 95% confidence intervals (CIs). RESULTS: Dental caries in permanent teeth was found in 610 children (30.9%), with a mean DMFS of 2.09 (SD = 1.2). The adjusted ORs for dental caries in permanent teeth was 1.46 (95% CI 1.00, 2.13) for LBW. CONCLUSIONS: LBW was not associated with dental caries in permanent teeth in the study population.

Skull Base Sphenoid Bone: A Potential Route of Brain Abscesses Induced by Odontogenic Infection.

ABSTRACT: Odontogenic foci are rarely linked with brain abscesses. The lack of an effective approach to match the causative origin with the infection can lead to late medical response of patients. Here we present a case of a 53-year-old man with brain abscesses that was probably caused by odontogenic foci. The imaging examinations clearly showed the periodontitis of mandibular left second molar and the destruction of greater sphenoid wing. Therefore, possible routes of extension through masticator space abscesses were indicated. For early infection of the maxillofacial space caused by potential odontogenic lesions, oral surgeons should eliminate the potentially odontogenic foci and use computerized tomography imaging to determine the existence of bone destruction around the oral cavity such as the skull to prevent further bone defect complications such as brain abscesses.

Construction and validity of a midsagittal plane based on the symmetry of a 3-dimensional model of the relevant cranial base.

INTRODUCTION: The midsagittal plane (MSP) is the foundation for 3-dimensional (3D) cephalometric analyses. This article aimed to provide a protocol to construct a reliable and accurate MSP for 3D cephalometric craniofacial analysis. METHODS: Cone-beam computed tomography data of 16 adult patients without obvious bilateral asymmetry were collected. The model of the anterior cranial base and sphenoid bone was constructed, and the candidate MSP was determined on the basis of the symmetry of this model. Intraclass correlation coefficients were used to assess intra- and interexaminer reliability of the candidate MSP. To investigate the accuracy of this candidate MSP, we constructed a true plane of symmetry of craniomaxillofacial structure and a control plane on the basis of 3 cranial midline points. We then compared these with the candidate MSP. RESULTS: This candidate MSP resembled the true plane of symmetry with all the mean absolute errors <1 mm, and all the absolute errors for the candidate MSP were significantly smaller than the control plane (P ≤0.002). The relative intra- and interexaminer reliability for this candidate MSP was almost perfect (intraclass correlation coefficients >0.9). CONCLUSIONS: The candidate MSP constructed using this method was thought to be reliable and accurate for 3D cephalometric analysis in patients without obvious cranial asymmetry.