RESUMO
Understanding the role of the oxidation state of the Cu surface and surface-adsorbed intermediate species in electrochemical CO2 reduction is crucial for the development of selective CO2-to-fuel electrocatalysts. In this study, the electrochemical CO2 reduction mechanism over the Cu catalysts with various oxidation states was studied by using in situ surface-enhanced infrared absorption spectroscopy (SEIRAS), in situ soft X-ray absorption spectroscopy (Cu L-edge), and online gas chromatography measurements. The atop-adsorbed CO (COatop) intermediate is obtained on the electrodeposited Cu surface which primarily has the oxidation state of Cu(I). COatop is further reduced, followed by the formation of C1 product such as CH4. The residual bridge-adsorbed CO (CObridge) is formed on the as-prepared Cu surface with Cu(0) which inhibits hydrocarbon formation. In contrast, the CV-treated Cu electrode prepared by oxidizing the as-prepared Cu surface contains different amounts of Cu(I) and Cu(0) states. The major theme of this work is that in situ SEIRAS results show the coexistence of COatop and CObridge as the reaction intermediates during CO2 reduction and that the selectivity of CO2-to-ethylene conversion is further enhanced in the CV-treated Cu electrode. The Cu catalysts modulated by the electrochemical method exhibit different oxidation states and reaction intermediates as well as electrocatalytic properties.
RESUMO
In this study, we have combined ultra-high vacuum (UHV) experiments and density functional theory (DFT) calculations to investigate ethanol (EtOH) dehydrogenation on Pd-Au model catalysts. Using EtOH reactive molecular beam scattering (RMBS), EtOH temperature-programmed desorption (TPD), and DFT calculations, we show how different Pd ensemble sizes on Au(111) can affect the mechanism for EtOH dehydrogenation and H2 production. The Au(111) surface with an initial coverage of 2 monolayers of Pd (2 ML Pd-Au) had the highest H2 yield. However, the 1 ML Pd-Au catalyst showed the highest selectivity and stability, yielding appreciable amounts of only H2 and acetaldehyde. Arrhenius plots of H2 production confirm that the mechanisms for EtOH dehydrogenation differed between 1 and 2 ML Pd-Au, supporting the perceived difference in selectivity between the two surfaces. DFT calculations support this difference in mechanism, showing a dependence of the initial dehydrogenation selectivity of EtOH on the size of Pd ensemble. DFT binding energies and EtOH TPD confirm that EtOH has increasing surface affinity with increasing Pd ensemble size and Pd coverage, indicating that surfaces with more Pd are more likely to induce an EtOH reaction instead of desorb. Our theoretical results show that the synergistic influence of atomic ensemble and electronic effects on Pd/Au(111) can lead to different H2 association energies and EtOH dehydrogenation capacities at different Pd ensembles. These results provide mechanistic insights into ethanol's dehydrogenation interactions with different sites on the Pd-Au surface and can potentially aid in bimetallic catalyst design for applications such as fuel cells.
RESUMO
It has been reported that Pd-Au bimetallic catalysts display improved catalytic performance after adequate calcination. In this study, a model catalyst study was conducted to investigate the effects of annealing in oxygen on the surface structures of Pd-Au alloys by comparing the physicochemical properties of Pd/Au(111) surfaces that were annealed in ultrahigh vacuum (UHV) versus in an oxygen ambient. Auger electron spectroscopy (AES) and Basin hopping simulations reveal that the presence of oxygen can inhibit the diffusion of surface Pd atoms into the subsurface of the Au(111) sample. Reflection-absorption infrared spectroscopy using CO as a probe molecule (CO-RAIRS) and King-Wells measurements of O2 uptake suggest that surfaces annealed in an oxygen ambient possess more contiguous Pd sites than surfaces annealed under UHV conditions. The oxygen-annealed Pd/Au(111) surface exhibited a higher activity for CO oxidation in reactive molecular beam scattering (RMBS) experiments. This enhanced activity likely results from the higher oxygen uptake and relatively facile dissociation of oxygen admolecules due to stronger adsorbate-surface interactions as suggested by temperature-programmed desorption (TPD) measurements. These observations provide fundamental insights into the surface phenomena of Pd-Au alloys, which may prove beneficial in the design of future Pd-Au catalysts.
RESUMO
Pd-Au catalysts have shown exceptional performance for selective hydrogen production via HCOOH decomposition, a promising alternative to solve issues associated with hydrogen storage and distribution. In this study, we utilized temperature-programmed desorption (TPD) and reactive molecular beam scattering (RMBS) in an attempt to unravel the factors governing the catalytic properties of Pd-Au bimetallic surfaces for HCOOH decomposition. Our results show that Pd atoms at the Pd-Au surface are responsible for activating HCOOH molecules; however, the selectivity of the reaction is dictated by the identity of the surface metal atoms adjacent to the Pd atoms. Pd atoms that reside at Pd-Au interface sites tend to favor dehydrogenation of HCOOH, whereas Pd atoms in Pd(111)-like sites, which lack neighboring Au atoms, favor dehydration of HCOOH. These observations suggest that the reactivity and selectivity of HCOOH decomposition on Pd-Au catalysts can be tailored by controlling the arrangement of surface Pd and Au atoms. The findings in this study may prove informative for rational design of Pd-Au catalysts for associated reactions including selective HCOOH decomposition for hydrogen production and electro-oxidation of HCOOH in the direct formic acid fuel cell.
RESUMO
Supported gold nanoparticles have recently been shown to possess intriguing catalytic activity for hydrogenation reactions, particularly for selective hydrogenation reactions. However, fundamental studies that can provide insight into the reaction mechanisms responsible for this activity have been largely lacking. In this tutorial review, we highlight several recent model experiments and theoretical calculations on a well-structured gold surface that provide some insights. In addition to the behavior of hydrogen on a model gold surface, we review the reactivity of hydrogen on a model gold surface in regards to NO2 reduction, chemoselective C=O bond hydrogenation, ether formation, and O-H bond dissociation in water and alcohols. Those studies indicate that atomic hydrogen has a weak interaction with gold surfaces which likely plays a key role in the unique hydrogenative chemistry of classical gold catalysts.
RESUMO
Activation of inert CO2 molecules for the reverse water gas shift (RWGS) reaction is tackled by incorporating magnesium oxide as a support material for copper, forming a Cu/MgO supported catalyst. The RWGS performance is greatly improved when compared with pure Cu or carbon supported Cu (Cu/C). Operating under a weight hourly space velocity (WHSV) of 300,000â mL â g-1 â h-1, the Cu/MgO catalyst demonstrates high activity, maintaining over 70 % equilibrium conversion and nearly 100 % CO selectivity in a temperature range of 300-600 °C. In contrast, both Cu/C and commercial Cu, even at ten-times lower WHSV, can only achieve up to 40 % of the equilibrium conversion and quickly deactivated due to sintering. Based on the studies of in-situ temperature resolved infrared spectroscopy and temperature programmed desorption, the improved RWGS performance is attributed to the unique adsorption behavior of CO2 on Cu/MgO. Density functional theory studies provides a plausible explanation from a surface reaction perspective and reveals the spill-over property of CO2 from MgO to Cu being critical.
RESUMO
We have discovered that NO(2) is reduced to NO at 77 K by hydrogen precovered gold in vacuum. Here, we investigate the partial reduction of NO(2) to NO on an atomic-hydrogen populated model gold catalyst for a more fundamental understanding of the surface chemistry of hydrogenation. Gold-based catalysts have been found to be active for many hydrogenation reactions, but few related fundamental studies have been conducted. Our experimental results reveal a high catalytic activity for gold: indeed, NO(2) is reduced to NO with 100% conversion and 100% selectivity at temperatures lower than 120 K. Density functional theory calculations and reflection-absorption infrared spectroscopy measurements indicate that HNO(2) and N(2)O(3) are intermediates which are highly dependent on surface hydrogen concentrations; subsequent hydrogenation of HNO(2) and dissociation of N(2)O(3) upon annealing induces the production of NO and H(2)O.
Assuntos
Ouro/química , Hidrogênio/química , Óxido Nítrico/química , Óxido Nítrico/síntese química , Temperatura , Catálise , Oxirredução , Teoria QuânticaRESUMO
This study is devoted to investigating the stability of metal-organic framework (MOF)-hybrid perovskites consisting of CH3NH3PbI3 (MAPbI3) and UiO-66 without a functional group and UiO-66 with different COOH, NH2,and F functional groups under external influences including heat, light, and humidity. By conducting crystallinity, optical, and X-ray photoelectron spectra (XPS) measurements after long-term aging, all of the prepared MAPbI3@UiO-66 nanocomposites (with pristine UiO-66 or UiO-66 with additional functional groups) were stable to light soaking and a relative humidity (RH) of 50%. Moreover, the UiO-66 and UiO-66-(F)4 hybrid perovskite films possessed a higher heat tolerance than the other two UiO-66 with the additional functional groups of NH2 and COOH. Tthe MAPbI3@UiO-66-(F)4 delivered the highest stability and improved optical properties after aging. This study provides a deeper understanding of the impact of the structure of hybrid MOFs on the stability of the composite films.
RESUMO
A facile process is introduced to flake high aspect-ratio anodic TiO(2) nanotube (TiNT) arrays off Ti substrates and then chemically remove the bottom caps to obtain open-ended TiNT films that exhibit high activity to photocatalytic degradation of methylene blue and efficient hydrogen production from photoelectrocatalytic water splitting.
RESUMO
Au/TiO2 prepared in a pH adjusted gold solution by a deposition-precipitation method can possess high activity and stability for selective CO oxidation in a H2 rich stream at ambient temperature.
Assuntos
Monóxido de Carbono/química , Ouro/química , Hidrogênio/química , Titânio/química , Catálise , Concentração de Íons de Hidrogênio , Oxirredução , TemperaturaRESUMO
A fundamental understanding of the interactions between coadsorbed water and hydrogen on metallic surfaces is critical to many chemical processes including catalysis and electrochemistry. Here, we report on the strong and intricate interactions between coadsorbed H/D and water on the close-packed (111) surface of gold. Deuterium isotopic labeling shows H/D exchange in H-D2O and D-H2O systems, indicating water dissociation and suggesting a nonrandom scrambling process by revealing the origin of hydrogen evolution (from surface H atoms or from water molecules) during annealing. In this reaction, the protonation of the H-bonding ice network (i.e., the formation of (H2O)nH(+)) is energetically favorable and is responsible for water dissociation. Density functional theory (DFT) modeling suggests that the thermodynamics and structure of the protonated clusters are predominant factors for yielding the traceable H2 desorption features from the surface interaction with H atoms, providing insights into reaction mechanisms.
RESUMO
We have developed a novel method of immobilizing glycans onto aluminum-coated glass (ACG) slides for potential use in disease diagnosis and drug discovery. The quality of these sugar chips can be assessed by mass spectrometry and fluorescence measurements with high sensitivity. The unique properties of ACG slides include: 1) the metal oxide layer on the surface can be activated for grafting organic compounds such as modified oligosaccharides; 2) the surface remains electrically conductive, and the grafted oligosaccharides can be simultaneously characterized by mass spectrometry and carbohydrate-binding assay; and 3) the slides are more sensitive than transparent glass slides in binding analysis. To demonstrate this, we synthesized a model compound of mannose with a built-in photocleavable linker bound to the ACG slide surface. The molecular weight of the grafted mannose was identified by mass spectrometry, and the slide was subjected to biotinylated ConA binding followed by Cy3-tagged streptavidin detection. This method was further extended to the preparation of glycan arrays containing lactose and the cancer antigen Globo H.
Assuntos
Alumínio/química , Vidro/química , Polissacarídeos/análise , Reagentes de Ligações Cruzadas/química , Manose/química , Espectrometria de Massas , Microscopia Eletrônica de Varredura , Estrutura Molecular , Fotoquímica , Polissacarídeos/química , Proteínas/química , Análise Espectral , Propriedades de SuperfícieRESUMO
This paper aims to provide a practical catanionic vesicle-boosting method by means of cosolvent addition in water and to propose a theoretical explanation which can delineate the general trend of cosolvent effects and elucidate the possible role of cosolvent in the formation of catanionic vesicles. Effects of four homologous cosolvents (methanol, ethanol, 1-propanol, and 1-butanol) on the spontaneous formation of vesicles from eight 1:1 anionic-cationic mixed surfactant systems, sodium alkyl sulfates-alkyltrimethylammonium bromides (C(n)SO4Na-C(m)N(CH3)3Br; n = 12, 14; m = 8, 10, 12, 14), at a total surfactant concentration of 10 mM were systematically studied. The experimental results revealed that varied changes in vesicle formability of different mixed surfactant systems may result from various kinds and amounts of cosolvent. Four types of cosolvent effects, however, can be classified. Among them, cosolvent effects type 2 and type 3 would serve the purpose and were exemplified by C12SO4Na-C10N(CH3)3Br, C14SO4Na-C10N(CH3)3Br, and C12SO4Na-C12N(CH3)3Br mixed surfactants. Furthermore, the effectiveness of vesicle boosting increases in the order 1-butanol > 1-propanol > ethanol > methanol. An explanation of cosolvent effects based on the medium dielectric constant was then proposed.