Enhancing the Performance of Electret-Free Phototransistor Memory by Using All-Conjugated Block Copolymer.

Conjugated polymers are of great interest owing to their potential in stretchable electronics to function under complex deformation conditions. To improve the performance of conjugated polymers, various structural designs have been proposed and these conjugated polymers are specially applied in exotic optoelectronics. In this work, a series of all-conjugated block copolymers (PII2T-b-PNDI2T) comprising poly(isoindigo-bithiophene) (PII2T) and poly(naphthalenediimide-bithiophene) (PNDI2T) are developed with varied compositions and applied to electret-free phototransistor memory. Accordingly, these memory devices present p-type transport capability and electrical-ON/photo-OFF memory behavior. The efficacy of the all-conjugated block copolymer design in improving the memory-photoresponse properties in phototransistor memory is revealed. By optimizing the composition of the block copolymer, the corresponding device achieves a wide memory window of 36 V and a high memory ratio of 7 × 104 . Collectively, the results of this study indicate a new concept for designing electret-free phototransistor memory by using all-conjugated block copolymer heterojunctions to mitigate the phase separation of conjugated polymer blends. Meanwhile, the intrinsic optoelectronic properties of the constituent conjugated polymers can be well-maintained by using an all-conjugated block copolymer design.

Commercially available jeffamine additives for p-i-n perovskite solar cells.

Commercially available Jeffamines (polyetheramine) with average molecular weights of 2000 and 3000 g mol-1; one (M2005), two (D2000), and three (T3000) primary amino groups end-capping on the polyether backbone; and propylene oxide (PO) and ethylene oxide (EO) functionality were explored as additives for application in MAPbI3 perovskite solar cells (PSCs). The results indicated that the embedding of Jeffamine additives effectively passivates the defects in the grain boundaries of perovskite through the coordination bonding between the nitrogen atom and the uncoordinated lead ion of perovskite. We fabricated p-i-n PSC devices with the structure of glass/indium tin oxide (ITO)/NiOx/CH3NH3PbI3 (with and without Jeffamine)/PC61BM/BCP/Ag. We observed the interaction between the Jeffamine and perovskites. This interaction led to increased lifetimes of the carriers of perovskite, which enabled the construction of high-performance p-i-n PSCs. For the Jeffamine-D2000-derived device, we observed an increase in the power conversion efficiency from 14.5% to 16.8% relative to the control device. Furthermore, the mechanical properties of the perovskite films were studied. The interaction between the additive and perovskite reinforced the flexibility of the thin film, which may pave the way for stretchable optoelectronics.

Electrical Double-Layer Transistors Comprising Block Copolymer Electrolytes for Low-Power-Consumption Photodetectors.

Electrical double-layer transistors (EDLTs) have received extensive research attention owing to their exciting advantages of low working voltage, high biocompatibility, and sensitive interfacial properties in ultrasensitive portable sensing applications. Therefore, it is of great interest to reduce photodetectors' operating voltage and power consumption by utilizing photo-EDLT. In this study, a series of block copolymers (BCPs) of poly(4-vinylpyridine)-block-poly(ethylene oxide) (P4VP-b-PEO) with different compositions were applied to formulate polyelectrolyte with indigo carmine salt in EDLT. Accordingly, PEO conduces ion conduction in the BCP electrolyte and enhances the carrier transport capability in the semiconducting channel; P4VP boosts the photocurrent by providing charge-trapping sites during light illumination. In addition, the severe aggregation of PEO is mitigated by forming a BCP structure with P4VP, enhancing the stability and photoresponse of the photo-EDLT. By optimizing the BCP composition, EDLT comprising P4VP16k-b-PEO5k and indigo carmine provides the highest specific detectivity of 2.1 × 107 Jones, along with ultralow power consumptions of 0.59 nW under 450 nm light illumination and 0.32 pW under dark state. The results indicate that photo-EDLT comprising the BCP electrolyte is a practical approach to reducing phototransistors' operating voltage and power consumption.

Realizing Broadband NIR Photodetection and Ultrahigh Responsivity with Ternary Blend Organic Photodetector.

With the advancement of portable optoelectronics, organic semiconductors have been attracting attention for their use in the sensing of white and near-infrared light. Ideally, an organic photodiode (OPD) should simultaneously display high responsivity and a high response frequency. In this study we used a ternary blend strategy to prepare PM6: BTP-eC9: PCBM-based OPDs with a broad bandwidth (350-950 nm), ultrahigh responsivity, and a high response frequency. We monitored the dark currents of the OPDs prepared at various PC71BM blend ratios and evaluated their blend film morphologies using optical microscopy, atomic force microscopy, and grazing-incidence wide-angle X-ray scattering. Optimization of the morphology and energy level alignment of the blend films resulted in the OPD prepared with a PM6:BTP-eC9:PC71BM ternary blend weight ratio of 1:1.2:0.5 displaying an extremely low dark current (3.27 × 10-9 A cm-2) under reverse bias at -1 V, with an ultrahigh cut-off frequency (610 kHz, at 530 nm), high responsivity (0.59 A W-1, at -1.5 V), and high detectivity (1.10 × 1013 Jones, under a reverse bias of -1 V at 860 nm). Furthermore, the rise and fall times of this OPD were rapid (114 and 110 ns), respectively.

Synthesis of Azo Disperse Dyes with High Absorption for Efficient Polyethylene Terephthalate Dyeing Performances in Supercritical Carbon Dioxide.

Supercritical carbon dioxide dyeing (SCDD) not only enables strong dyeing performance for a versatile range of polymer material but is also regarded as a green chemical media due to its low environmental impact as well as low risk of product denaturation. Over the decades, azo disperse dyes have been revealed to be efficient dyes and represent the wide majority of dyeing material. Azo dyes possess a wide variety of functional groups to optimize dye synthesis and tune the light absorption properties. Using SCDD, end-chain of different lengths, and functional group exhibiting various electronic affinity, six disperse red azo dyes were synthesized to investigate dyeing performances as woven fabric type, color strain, and color fastness after dyeing are discussed. Dye structure synthesized through a coupling reaction was confirmed by 1H NMR and mass spectroscopy. We found that the light absorption wavelength and absorption coefficient value variation are associated to the nature of the functional group. From the color strength values of the polyethylene terephthalate woven after dyeing, we find that the fiber host and dye dopant chemical structure greatly influence the dyeing process by providing enhanced woven, color strain, and color fastness. In comparison with commercial products, our approach not only improves the dyeing process but also guarantees a strong resistance of the dyed product against water, detergent, perspiration, abrasion, and friction.

Red Disperse Azo Dye Side Chains Influence on Polyethylene Terephthalate Dyeing Performances in Supercritical Carbon Dioxide Media.

Supercritical carbon dioxide dyeing (SDD) as a dyeing media not only provides a friendly dyeing environment but also significantly increases polymeric dyeing performances ascribed to strong azo dye affinity. Disperse azo dyes have shown to be highly efficient dyeing agents due to their facile coupling synthesis, side chains position, and length tunability to optimize absorption properties. Herein, we first synthesize two series of disperse red azo dyes via a coupling chemical route. Further, we investigate the position of the electron withdrawing group and alkyl chains length impact onto the absorption and color fastness properties. Upon synthesis, 1H NMR and mass spectroscopy were used to characterize our newly synthesized series dye structure. Also, according to spectroscopic characterization, the functional group positions as well as the alkyl chains length have a major impact on the dye series maximum light absorption wavelength and performance. We have performed SDD dyeing of polyethylene terephthalate woven and determined each dye color fastness, we find that a reduced electron withdrawing effect and alkyl chains increase reduce color-fastness performances. Overall, our dyes exhibited a good resistance against detergent water, perspiration, abrasion, and friction.

Nanofiber-Based Odor-Free Medical Mask Fabrication Using Polyvinyl Butyral and Eucalyptus Anti Odor Agent.

Following the 2020 COVID-19 worldwide outbreak, many countries adopted sanitary and safety measures to safeguard public health such as wearing medical face mask. While face masks became a necessity for people, disadvantages impede their long period wearing such as uncomfortable breathability and odor. The intermediate layer of the medical face mask is composed of porous non-woven fabric to block external particles while maintaining breathability. To overcome aforementioned limitation, this study uses electrospinning to design and fabricate odorless face masks via the use of aromatic oil. Eucalyptus essential oil is encapsulated through mixing and layer-by-layer by hydrophobic polyvinyl butyral and further used to fabricate the medical mask intermediate layer. We found that adding 0.2 g of eucalyptus into polyvinyl butyral fabric through mixing results in the deodorization rate of 80% after 2 h, with fabric thickness of 440.9 µm, and melt-blown non-woven fabric thickness of 981.7 µm. The Particle Filtration Efficiency of 98.3%, Bacterial Filtration Efficiency above 99.9%, and the differential pressure of 4.7 mm H2O/cm2 meet the CNS 14774 standard on medical face masks. Therefore, this study successfully proved that this type of masks' middle layer not only effectively protects against coronavirus, but also provides better scents and makes it more comfortable for consumers.

Improving the Performance of Polymer Solar Cells with Benzo[ghi]perylenetriimide-Based Small-Molecules as Interfacial Layers.

In this study, we prepared three benzo[ghi]perylenetriimide (BPTI) conjugated molecules as electron-transporting surface-modifying layers for polymer solar cells (PSCs). These three BPTI derivatives differed in the nature of their terminal functionalities, featuring butylamine (C3NH2), propylammonium iodide (C3NH3I), and butyldimethylamine (C3DMA) units, respectively. We evaluated the optoelectronic properties of PTB7-Th: PC71BM blends modified with these interfacial layers, as well as the performance of resulting PSCs. We used UV-Vis spectroscopy, atomic force microscopy, surface energy analysis, ultraviolet photoelectron spectroscopy, and photoelectric flow measurements to examine the phenomena behind the changes in the optoelectronic behavior of these blend films. The presence of a BPTI derivative changed the energy band alignment at the ZnO-active layer interface, leading to the ZnO film behaving more efficiently as an electron-extraction electrode. Modifying the ZnO surface with the BPTI-C3NH3I derivative resulted in a best power conversion efficiency (PCE) of 10.2 ± 0.53% for the PTB7-Th:PC71BM PSC (cf. PCE of the control device of 9.1 ± 0.13%). In addition, modification of a PM6:Y6:PCBM PSC with the BPTI-C3NH3I derivative increased its PCE from 15.6 ± 0.25% to 16.5 ± 0.18%. Thus, BPTI derivatives appear to have potential as IFLs when developing high-performance PSCs, and might also be applicable in other optoelectronic devices.

Antibacterial Activity and Protection Efficiency of Polyvinyl Butyral Nanofibrous Membrane Containing Thymol Prepared through Vertical Electrospinning.

Human safety, health management, and disease transmission prevention have become crucial tasks in the present COVID-19 pandemic situation. Masks are widely available and create a safer and disease transmission-free environment. This study presents a facile method of fabricating masks through electrospinning nontoxic polyvinyl butyral (PVB) polymeric matrix with the antibacterial component Thymol, a natural phenol monoterpene. Based on the results of Japanese Industrial Standards and American Association of Textile Chemists and Colorists methods, the maximum antibacterial value of the mask against Gram-positive and Gram-negative bacteria was 5.6 and 6.4, respectively. Moreover, vertical electrospinning was performed to prepare Thymol/PVB nanofiber masks, and the effects of parameters on the submicron particulate filtration efficiency (PFE), differential pressure, and bacterial filtration efficiency (BFE) were determined. Thorough optimization of the small-diameter nanofiber-based antibacterial mask led to denser accumulation and improved PFE and pressure difference; the mask was thus noted to meet the present pandemic requirements. The as-developed nanofibrous masks have the antibacterial activity suggested by the National Standard of the Republic of China (CNS 14774) for general medical masks. Their BFE reaches 99.4%, with a pressure difference of <5 mmH2O/cm2. The mask can safeguard human health and promote a healthy environment.

Synthesis and characterization of poly(3-hexylthiophene)/poly(3-(trimethoxysilyl)propyl methacrylate) rod-coil block copolymers by using atom transfer radical polymerization.

In this study, polythiophene based rod-coil block copolymers (P3HT)47-b-(PMSMA)34 are synthesized by atom transfer radical polymerization (ATRP). The effects of altering the mix of solvent and processing temperature on the morphologies and photophysical properties of the block copolymers in both solution and solid state are investigated. The chemical structure of the prepared block copolymers is confirmed by NMR and FTIR analysis. TEM results show that different morphologies of aggregates can be obtained by varying the toluene/methanol ratios. Such aggregation leads to a significant red shift on the optical absorption and photoluminescence spectra of the P3HT-b-PMSMA in mixed solvents. The results of AFM, UV-Vis, and PL show that the morphologies and photophysical properties of P3HT-b-PMSMA films are also significantly affected by the curing temperature. Blue shifts on the optical absorption and photoluminescence spectra are observed upon increasing the curing temperature.

Synthesis and characterization of polyimide-based hybrid thin films from a novel colloidal core-shell nanocomposite particles.

In this study, poly(4,4-(hexafluoroisopropylidenediphthalic anhydride)-co-oxydianiline) (6FDA-ODA) and a novel core-shell nanoparticle consisting of a core (SnO2/TiO2) and a shell (ZrO2/Sb2O3) with the composition (SnO2:TiO2:ZrO2:Sb2O3 = 18:5:3:4) were used to prepare polyimide/nanoparticles hybrid thin films. The resultant hybrid thin films were investigated by FTIR, TGA, DSC, TEM, SEM, AFM, alpha-step, UV-Vis, and n&k analyses. The results show that the prepared hybrid thin films had a good thermal stability. The size of nanoparticles was effectively controlled in the range of 8-10 nm in the hybrid thin films. These nanoparticles were evenly distributed across the hybrid thin films and no phase separation occurred. In terms of the optical properties, the prepared hybrid thin films had good transparency in the range of visible light. The cutoff wavelength had a blue shift as the content of the nanoparticles increased. The refractive index of prepared hybrid thin films increased with corresponding increases in nanoparticle content. Moreover, the prepared polyimide/core-shell nanoparticle hybrid thin films displayed excellent film formability and planarity.

Controlling pore morphology and properties of nanoporous silica films using the different architecture PS-b-P2VP as a template.

Nanoporous silica films were prepared through the templating of amphiphilic block copolymer, poly(styrene-2-vinyl pyridine) (PS-b-P2VP), and monodispersed colloidal silica nanoparticles. The experimental and theoretical studies suggested that the intermolecular hydrogen bonding existes between the colloidal silica nanoparticles and PS-b-P2VP. The effects of the loading ratio and P2VP chain length on the morphology and properties of the prepared nanoporous silica films were investigated. TEM and AFM studies showed that the uniform pore size could be achieved and the pore size increased with increasing porogen loading. The refractive index and dielectric constant of the prepared nanoporous films decreased with an increase in PS-b-P2VP loading. On the other hand, the porosity increased with an increasing PS-b-P2VP loading. This study demonstrated a methodology to control pore morphology and properties of the nanoporous silica films through the templating of PS-b-P2VP.

Preparation of poly(acrylic)/SiO2/EuL3 x 2H2O, hybrid thin films from monodispersed colloidal silica.

In this study, poly(acrylic)/SiO2/EuL3 x 2H2O hybrid thin films were prepared from various acrylic monomers (MMA and EDMA/TMPTA), lanthanide metal complexes (EuL3 x 2H2O, L = pyridine carboxylic acid), and monodispersed colloidal silica with a coupling agent, 3-(trimethoxysilyl)propyl methacrylate (MSMA). It is a combination of the sol-gel reaction, thermal polymerization, and spin coating. The silica content in the hybrid thin films is fixed at 20 wt%, and the EuL3 x 2H2O content is varied from 0.01 g to 0.07 g. FTIR and EA analysis confirms the chemical structure of the prepared EuL3 x 2H2O and poly(acrylic)/SiO2/EuL3 x 2H2O hybrid thin films. UV-Vis spectra and n&k analysis shows that the hybrid thin film has good transparency in visible light. The refractive index of hybrid thin films can be effectively controlled through the EuL3 x 2H2O content. The PL spectra shows that the strongest emission peak occurs at 615 nm and the emission intensity increases to the peak maximum at an EuL3 x 2H2O content of 0.05 g. Both TGA and PL analysis show that the prepared hybrid thin films from the crosslinked acrylic polymer moiety have much better film uniformity, thermal stability, and fluorescence properties. The TEM diagram shows that the MSMA/SiO2/EuL3 x 2H2O particles with a size 15-20 nm are well dispersed in the reaction solution. The SEM diagram shows that the particle distribution in the prepared hybrid thin films is uniform and no phase separation is observed. Finally, AFM analysis indicates that the prepared hybrid thin films have an excellent surface planarity.

Preparation and Application of Organic-Inorganic Nanocomposite Materials in Stretched Organic Thin Film Transistors.

High-transparency soluble polyimide with COOH and fluorine functional groups and TiO2-SiO2 composite inorganic nanoparticles with high dielectric constants were synthesized in this study. The polyimide and inorganic composite nanoparticles were further applied in the preparation of organic-inorganic hybrid high dielectric materials as the gate dielectric for a stretchable transistor. The optimal ratio of organic and inorganic components in the hybrid films was investigated. In addition, Jeffamine D2000 and polyurethane were added to the gate dielectric to improve the tensile properties of the organic thin film transistor (OTFT) device. PffBT4T-2OD was used as the semiconductor layer material and indium gallium liquid alloy as the upper electrode. Electrical property analysis demonstrated that the mobility could reach 0.242 cm2·V-1·s-1 at an inorganic content of 30 wt.%, and the switching current ratio was 9.04 × 103. After Jeffamine D2000 and polyurethane additives were added, the mobility and switching current could be increased to 0.817 cm2·V-1·s-1 and 4.27 × 105 for Jeffamine D2000 and 0.562 cm2·V-1·s-1 and 2.04 × 105 for polyurethane, respectively. Additives also improved the respective mechanical properties. The stretching test indicated that the addition of polyurethane allowed the OTFT device to be stretched to 50%, and the electrical properties could be maintained after stretching 150 cycles.

Synthesis of Water Resistance and Moisture-Permeable Nanofiber Using Sodium Alginate-Functionalized Waterborne Polyurethane.

The development of nontoxic and biodegradable alginate-based materials has been a continual goal in biological applications. However, their hydrophilic nature and lack of spinnability impart water instability and poor mechanical strength to the nanofiber. To overcome these limitations, sodium alginate (SA) and waterborne polyurethane (WPU) were blended and crosslinked with calcium chloride; 30 wt % of SA exhibited good compatibility. Further addition of 10 wt % calcium chloride improved the water stability to an extremely humid region. Furthermore, the stress-strain curve revealed that the initial modulus and the elongation strength of the WPU/SA and WPU/CA blends increased with SA content, and the crosslinker concentration clearly indicated the dressing material hardness resulted from this simple blend strategy. The WPU/SA30 electrospun nanofibrous blend contained porous membranes; it exhibited good mechanical strength with water-stable, water-absorbable (37.5 wt %), and moisture-permeable (25.1 g/m2-24 h) characteristics, suggesting our cost-effective material could function as an effective wound dressing material.

Hybrid thin films derived from poly(acrylic)/ colloidal silica/lanthanide metal complex.

In this study, poly(acrylic)/SiO2/EuL3 x 2H2O hybrid thin films were prepared from various acrylic monomers (MMA and EDMA/TMPTA), lanthanide metal complexs (EuL3 x 2H2O, L = pyridine carboxylic acid), and monodispersed colloidal silica with a coupling agent, 3-(trimethoxysilyl)propyl methacrylate (MSMA). It was a combination of the sol-gel reaction, thermal polymerization, and spin coating. The EuL3 x 2H2O content in the hybrid thin films was fixed at 0.05 g and silica content was varied from 10 to 50 wt%. TEM results showed that both SiO2 and EuL3 x 2H2O were well dispersed in the hybrid thin films without aggregation. PL spectra showed the unique emission of Eu3+. The addition of SiO2 made the compounds of Eu3+ disperse better and diminished the effect of concentration quenching. UV-Vis spectra and n&k analysis showed that the hybrid thin films had good transparency in visible light. Besides, the refractive index of hybrid thin films could be effectively controlled through the different ratio of SiO2 to EuL3 x 2H2O. TGA and DSC analysis indicated that the temperature of pyrolysis and T(g) increased with the increase in the SiO2 content. The results of SEM, SCMS, and AFM also showed that the hybrid thin films which prepared from the poly-functional acrylate had a flatter surface than those obtained from the single functional acrylate.

Synthesis and characterization of polyimide/monodispersed colloidal silica hybrid thin films.

In this study, two types of the polyimide-silica hybrid thin films, 6FDA-ODA/SiO2 (FS0-FS50) and PMDA-ODA/SiO2 (PS0-PS40), with different silica content were synthesized by using the sol-gel method. TGA analysis showed that the thermal decomposition temperatures (T(d)) of FS and PS hybrid films were in the range of 457-505 degrees C and 458-516 degrees C, respectively. The T(d) increased with increasing the silica content. The measurement of contact angle and FTIR indicated that the hydrophilic and hydrolytic abilities were significantly improved when the silica content increased. The contact angle of PS0-PS40 films was in the range of 80.3-51.8 degrees. UV-Vis spectra showed that the cutoff wavelength of prepared hybrid films could be tunable through the silica content. The n&k analysis showed that the refractive index (n) of FS and PS hybrid films were in the range of 1.60-1.49 and 1.76-1.59, respectively, which could be controlled by the silica content. The extinction coefficients (k) are almost zero in the wavelength range of 300-900 nm, indicating the prepared hybrid films have an excellent optical transparency in the UV and visible region. TEM images showed that the particle size of silica in the hybrid thin films could be effectively controlled under sufficient content of coupling agent. Moreover, the results of SEM and AFM showed that the ratios of average roughness to thickness for all the prepared hybrid films were under 1.6%. It demonstrated that the prepared polyimide-silica hybrid thin films have an excellent film formability and planarity.

Preparation of nanoporous poly(methyl silsesquioxanes) films using PS-b-P4VP as template.

Nanoporous poly(methyl silsesquioxane) (PMSSQ) film was prepared through the templating of an amphiphilic block copolymer, poly(styrene-4-vinyl pyridine) (PS-b-P4VP). The experimental and theoretical studies suggest that the intermolecular hydrogen bonding is existed between the PMSSQ precursor and PS-b-P4VP. The miscible hybrid and the narrow thermal decomposition of the PS-b-P4VP lead to nanopores in the prepared films from the results of TGA, AFM, and TEM. The effects of the loading ratio on the morphology and properties of the prepared nanoporous PMSSQ films were investigated. The TEM and AFM studies show that the uniform pore morphology with pore size 10-15 nm can be prepared from a modest porogen loading level for the optimum intermolecular hydrogen bonding. The refractive index and dielectric constant of the prepared nanoporous films decreases with an increase in PS-b-P4VP loading. On the other hand, the porosity increases with an increasing PS-b-P4VP loading. This study demonstrates a methodology to control pore morphology and properties of the nanoporous PMSSQ films through the templating of PS-b-P4VP.

Preparation and Characterization of Thermo-Responsive Rod-Coil Diblock Copolymers.

In this study, we synthesized amphiphilic poly(2,7⁻(9,9⁻dioctylfluorene))⁻block⁻N,N⁻(diisopropylamino)ethyl methacrylate (POF⁻b⁻PDPMAEMA) rod-coil diblock copolymers by atom transfer radical polymerization (ATRP). The structure and multifunctional sensing properties of these copolymers were also investigated. The POF rod segment length of 10 was fixed and the PDPAEMA coil segment lengths of 90 and 197 were changed, respectively. The micellar aggregates of POF10⁻b⁻PDPAEMA90 rod-coil diblock copolymer in water showed a reversible shape transition from cylinder bundles to spheres when the temperature was changed from 20 to 80 °C or the pH was changed from 11 to 2. The atomic force microscopy (AFM) and transmission electron microscopy (TEM) measurements indicated that the temperature had also an obvious influence on the micelle size. In addition, since POF10⁻b⁻PDPAEMA90 had a lower critical solution temperature, its photoluminescence (PL) intensity in water is thermoreversible. The PL spectra showed that the POF⁻b⁻PDPAEMA copolymer had a reversible on/off profile at elevated temperatures, and thus could be used as an on/off fluorescent indicator for temperature or pH. The fluorescence intensity distribution of pH switched from "off⁻on" to "on⁻off" as the temperature increased. These results showed that the POF⁻b⁻PDPAEMA copolymer has a potential application for temperature and pH sensing materials.

Comprehensive Study on Chemical and Hot Press-Treated Silver Nanowires for Efficient Polymer Solar Cell Application.

In this study, chemical treatment (CT; oxidation⁻reduction method) and physical treatment (HP; hot-pressing methods) were applied to improve the performance of silver nanowire (AgNW)-derived electrodes on a glass or flexible polyethylene terephthalate (PET) substrate. The four-point probe method, UV-Vis spectroscopy and scanning electron microscopy (SEM) were used to measure the properties of AgNW electrodes and compare them with those of indium tin oxide (ITO) electrodes for exploring the possibility of using CT- and HP-based AgNW electrodes for polymer solar cell (PSC) applications. Using the CT or HP method, the sheet resistance of electrodes decreased to lower than 40 Ω sq-1 with an average high transmittance of more than 80%. Furthermore, HP reduced the surface roughness of AgNWs, which solved the inter-electrode short circuiting problem for devices. We studied the performance of poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) and zinc oxide-based PSC devices. The power conversion efficiency of HP-AgNW-derived poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl] (PTB7-Th):[6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) devices was 7.83%, which was slightly lower than the performance of the device using ITO (8.03%) as a substrate. After a bend test (100 times) at a 2-cm curvature radius, the efficiency of AgNW/PET-derived PSCs was more than 70%. The performance of PSCs made with AgNWs and ITO electrodes is comparable, but the cost of using AgNWs for electrodes is much lower; therefore, HP-derived AgNWs demonstrate great potential for optoelectronic applications.