RESUMO
Domino reaction of benzo[d]thiazole-2-methylamine (S1) has been developed in the presence of MnCl2 â 4H2O, leading to tetrasubstituted pyrrole coordinated dinuclear Mn(II) complex 1 ([MnClP]2, P-=2,3,4,5-tetrakis(benzo[d]thiazol-2-yl)pyrrol-1-ide). The reaction process has been studied by assigning a series of intermediates based on time-dependent mass spectrometry, control experiments, crystallography, and density functional theory (DFT) theoretical calculation. A plausible mechanism involving an unprecedented divergent-convergent domino sequence has been proposed. Compound S1 could be activated by MnCl2 â 4H2O via coordination, which divergently produces two intermediates imine II (1-(benzo[d]thiazol-2-yl)-N-(benzo[d]thiazol-2-ylmethyl)methanimine) and alkene C (1,2-bis(benzo[d]thiazol-2-yl)ethene) through oxidative self-condensation and free radical coupling followed by elimination, respectively. They could then react with each other convergently via formal [3+2] cycloaddition to give deprotonated tetrasubstituted pyrrole coordinated intermediate [MnClP] after aromatization. Dimerization of [MnClP] produces the final product 1. Three C-C bonds and one C-N bond are formed through this six-step domino sequence. The corresponding organic skeleton (HP: 2,2',2'',2'''-(1H-pyrrole-2,3,4,5-tetrayl)tetrakis(benzo[d]thiazole)) has been obtained from 1 and shows a higher fluorescent quantum yield (52 %) than the reported 3,4-diphenyl substituted analogue 2,2'-(3,4-diphenyl-1H-pyrrole-2,5-diyl)bis(benzo[d]thiazole) (DPB) (42 %).
RESUMO
We report the synthesis and structural characterization of a 2D metal-organic framework with AB-packing layers, [Co2(pybz)2(CH3COO)2]·DMF (Co2, pybz= 4-(4-pyridyl)benzoate), containing a stable (4,4)-grid network fabricated by paddle-wheel nodes, ditopic pybz, and acetate ligands. After removal of the guest, the layer structure is retained but reorganized into an ABCD packing mode in the activated phase (Co2a). Consequently, the intralayer square windows (7.2 × 5.0 Å2) close, while the interlayer separation is decreased slightly from 3.69 to 3.45 Å, leaving a narrow gap. Importantly, the dangling methyl group of the acetate with H-bonds to the adjacent layers and also the well-distributed π-π interactions between the aromatic rings of neighboring layers facilitate the structural stability. These weak supramolecular interactions further allow for favorable dynamic exfoliation of the layers, which promotes efficient adsorption of C2H2 (41.6 cm3 g-1) over CO2 with an adsorption ratio of 6.3 (0.5 bar, 298 K). The effective separation performance of equimolar C2H2/CO2 was verified by cycling breakthrough experiments and was even tolerable to moisture (R.H = 52%). DFT calculations, in situ PXRD, and PDF characterization reveal that the favorable retention of C2H2 rather than that of CO2 is due to its H-bond formation with the paddle-wheel oxygen atoms that triggers the increase in interlayer separation during C2H2 adsorption.
RESUMO
Reticular chemistry provides opportunities to design solid-state electrolytes (SSEs) with modular tunability. However, SSEs based on modularly designed crystalline metal-organic frameworks (MOFs) often require liquid electrolytes for interfacial contact. Monolithic glassy MOFs can have liquid processability and uniform lithium conduction, which is promising for the reticular design of SSE without liquid electrolytes. Here, we develop a generalizable strategy for the modular design of noncrystalline SSEs based on a bottom-up synthesis of glassy MOFs. We demonstrate such a strategy by linking polyethylene glycol (PEG) struts and nanosized titanium-oxo clusters into network structures termed titanium alkoxide networks (TANs). The modular design allows the incorporation of PEG linkers with different molecular weights, which give optimal chain flexibility for high ionic conductivity, and the reticular coordinative network provides a controlled degree of cross-linking that gives adequate mechanical strength. This research shows the power of reticular design in noncrystalline molecular framework materials for SSEs.
RESUMO
The first wide-view image of multiple structural and phase transformations for MOFs from crystal state transformations further to the extreme limit approaching liquid/glass phase, was presented based on a square-layer framework of [Co2(pybz)2(CH3COO)2]·DMF (Co2). The process involves i) an initial crystalline transformation brings to a 3-fold interpenetrated and ordered vacancies contained framework [Co(pybz)2(CH3OH)2]·2CH3OH (CoM) due to in-situ disassemble-reassemble, ii) thermal induced departure of a pair of cis-form coordinated methanol in CoM leads to amorphous framework (a-dCoM), iii) glass transition (Tg = 566 K) to super-cooled liquid (scl-dCoM, spanning 38 K), iv) obtaining MOF glass g-dCoM upon quenching the super-cooled liquid, and v) re-crystallization of super-cooled liquid to six-fold interpenetrated dia-net framework [Co(pybz)2]6n (rec-dCoM) under heating above 604 K. The access to glass from CoM, provides a new self-perturbation strategy to create more MOF glasses without melting. The wider pore size distribution in amorphous/glassy MOFs than crystalline precursor realized the first time selective hydrocarbon gas separation by breakthrough experiments, which bring efficient separation of 1:99 C2H2/C2H4 by either a-dCoM or g-dCoM and produce polymer grade C2H4 with purity ≥ 99.5% after a single adsorption process. Furthermore, the mixture of 50:50 C3H6/C3H8 can be separated by a-dCoM.
RESUMO
Supramolecular rather than covalent molecular engineering on Feringa motors can provide an alternative toolkit for tuning the properties of motorized materials through appropriate supramolecular structural perturbations, which are underexplored. Herein, a multicomponent supramolecular gel system is successfully prepared by employing an ultra-low molecular weight gelator and a modulator-Feringa motor. The electron microscopic, spectroscopic, and rheological data revealed that the morphology and mechanical properties of the gel can be tuned via a crystallographic mismatch branching (CMB) mechanism simply by adding varied amounts of motor modulators. Notably, the rotary motion of the motor is preserved in such a multicomponent gel system, and the morphology and rheology of the gel can be further altered by the motor's rotary motion that promotes the structural perturbation, resulting in seldomly seen gel-to-gel transition events. The work shown here offers prospects to utilize a supramolecular perturbation strategy to deliver responsiveness from molecular motors to the corresponding bulk materials.
RESUMO
Glassy and liquid state metal-organic frameworks (MOFs) are emerging type of materials subjected to intense research for their rich physical and chemical properties. In this report, we obtained the first glassy MOF that involves metal-carboxylate cluster building units via multi-stage structural transformations. This MOF is composed of linear [Mn3 (COO)6 ] node and flexible pyridyl-ethenylbenzoic linker. The crystalline MOF was first perturbed by vapor hydration and thermal dehydration to give an amorphous state, which can go through a glass transition at 505â K into a super-cooled liquid. The super-cooled liquid state is stable through a wide temperature range of 40â K and has the largest fragility index of 105, giving a broad processing window. Remarkably, the super-cooled liquid can not only be quenched into glass, but also recrystallize into the initial MOF when heated to a higher temperature above 558â K. The mechanism of the multi-stage structural transformations was studied by systematic characterizations of in situ X-ray diffraction, calorimetry, rheological, spectroscopic and pair-distribution function analysis. These multi-stage transformations not only represent a rare example of high temperature coordinative recognition and self-assembly, but also provide new MOF processing strategy through crystal-amorphous-liquid-crystal transformations.
RESUMO
Metal-organic framework (MOF) glasses are a fascinating new class of materials, yet their prosperity has been impeded by the scarcity of known examples and limited vitrification methods. In the work described in this report, we applied synergistic stimuli of vapor hydration and thermal dehydration to introduce structural disorders in interpenetrated dia-net MOF, which facilitate the formation of stable super-cooled liquid and quenched glass. The material after stimulus has a glass transition temperature (Tg) of 560 K, far below the decomposition temperature of 695 K. When heated, the perturbed MOF enters a super-cooled liquid phase that is stable for a long period of time (>104 s), across a broad temperature range (26 K), and has a large fragility index of 83. Quenching the super-cooled liquid gives rise to porous MOF glass with maintained framework connectivity, confirmed by EXAFS and PDF analysis. This method provides a fundamentally new route to obtain glassy materials from MOFs that cannot be melted without causing decomposition.
RESUMO
Conventional nanomaterials in electrochemical nonenzymatic sensing face huge challenge due to their complex size-, surface-, and composition-dependent catalytic properties and low active site density. In this work, we designed a single-atom Pt supported on Ni(OH)2 nanoplates/nitrogen-doped graphene (Pt1/Ni(OH)2/NG) as the first example for constructing a single-atom catalyst based electrochemical nonenzymatic glucose sensor. The resulting Pt1/Ni(OH)2/NG exhibited a low anode peak potential of 0.48 V and high sensitivity of 220.75 µA mM-1 cm-2 toward glucose, which are 45 mV lower and 12 times higher than those of Ni(OH)2, respectively. The catalyst also showed excellent selectivity for several important interferences, short response time of 4.6 s, and high stability over 4 weeks. Experimental and density functional theory (DFT) calculated results reveal that the improved performance of Pt1/Ni(OH)2/NG could be attributed to stronger binding strength of glucose on single-atom Pt active centers and their surrounding Ni atoms, combined with fast electron transfer ability by the adding of the highly conductive NG. This research sheds light on the applications of SACs in the field of electrochemical nonenzymatic sensing.
Assuntos
Grafite , Nanoestruturas , Eletrodos , Glucose/química , Grafite/química , Nanoestruturas/química , Níquel/químicaRESUMO
We present the construction of a M2 L4 -type metal-organic nanocage featuring four endohedral Feringa's motor motifs and its adaptive encapsulation towards a C60 guest molecule. The structure of the cage, though complicated on the 1 H NMR spectrum due to the adoption of mixed ligands, was unambiguously characterized with a combination of ESI-MS, 2D DOSY, 13 C NMR and particularly the SAXS technique. The molecular motor within the cage demonstrated similar photophysical properties to the uncoordinated one, indicating the motor's function was not compromised when it was anchored in such a confined nanospace. Furthermore, the nanocage showed good guest encapsulation ability towards C60 , and a guest induced-fit behavior of the cage was revealed based on the extensive SAXS analysis and molecular dynamics simulation. The adaptive motorized nanocage reported here represents one of the very few examples of integrating individual motors into a discrete nanoconfined system and offers prospects to achieve its non-equilibrium functions.
Assuntos
Metais , Modelos Moleculares , Espalhamento a Baixo Ângulo , Difração de Raios X , LigantesRESUMO
Different surface planes of various types of titanium dioxide (TiO2) crystals have diverse catalysis effects on the splitting of H2O and H2 and the electronic structures of the formed hydroxylated TiO2 vary significantly. A series of sixteen types of hydroxylated TiO2 surfaces containing two types of hydroxyls (OH1 and OH2) on four kinds of low index surfaces [(001), (100), (101), and (110)] of two types of crystals [anatase (A) and rutile (R)] are studied using first-principles density functional theory calculations. The catalyzed splitting of H2O and H2 on the eight low index surfaces is compared using Gibbs free energy. The geometries and electronic structures including the total and partial density of states and the charge density distribution of the sixteen hydroxylated surfaces are systematically described. The electronic structures of R-101, R-001, A-110, A-100, and A-001 surfaces are more significantly influenced by hydroxylation than other surfaces and the effects of OH2 are larger than those of OH1. In particular, the band gap values decrease and a new electronic energy state appears in R-001-OH2 and A-100-OH2. A new electronic state appears in the middle of the bands of R-101 and A-110 surfaces upon hydroxylation. The electron spin balance at the edge of the conduction band minimum of A-001-OH2 is disturbed. This research can provide theoretical guidance for experimental researchers to design surface hydroxylated TiO2 materials with tunable electronic structures and high catalytic performance.
RESUMO
A new glass forming method is essential for broadening the scope of liquid and glassy metal-organic frameworks due to the limitations of the conventional melt-quenching method. Herein, we show that in situ mechanical vibration can facilitate the framework melting at a lower temperature and produce glassy metal-organic frameworks (MOFs) with unique properties. Using zeolitic imidazolate framework (ZIF)-62 as a concept-proofing material, in situ mechanical vibration enables low-temperature melting at 653 K, far below its melting point (713 K). The resultant vibrated ZIF-62 glass exhibited a lower glass transition temperature of 545 K, improved gas accessible porosity, and pronounced short-to-medium range structures compared to the corresponding melt-quenched glass. We propose that vibration-facilitated surface reconstruction facilitates pre-melting, which could be the cause of the lowered melting temperature. The vibration assisted method represents a new general method to produce MOF glasses without thermal decomposition.
RESUMO
BACKGROUND: Coffin-Siris syndrome (CSS) is a rare autosomal dominant disorder characterized by intellectual disability, developmental delay, and characteristic facial features. Few patients with cutaneous phenotype in this rare syndrome have been reported. CASE PRESENTATION: Herein, we describe a 12-year-old Chinese girl diagnosed with CSS, who was referred to our hospital because of intellectual disability and short stature. Prominent characteristics of the cutaneous system were observed: (1) A congenital giant nevus from the left frontal and temporal regions to the entire left scalp; and (2) multiple melanocytic nevi on the face and trunk. Whole exome sequencing revealed a novel heterozygous variant in the ARID1B gene. Recombinant human growth hormone (rhGH) was given for short stature, and resulted in significantly improved height. No enlargement or malignant transformation of nevi occurred within 4 years of follow-up. CONCLUSION: The symptoms in cutaneous system is noteworthy,which may be a neglected phenotype in CSS.The therapeutic response of growth hormone is effective in this patient and no tumor related signs were found.
Assuntos
Nanismo , Deformidades Congênitas da Mão , Micrognatismo , Nevo Pigmentado , Anormalidades Múltiplas , Criança , Proteínas de Ligação a DNA/genética , Nanismo/genética , Face/anormalidades , Feminino , Deformidades Congênitas da Mão/diagnóstico , Deformidades Congênitas da Mão/genética , Humanos , Deficiência Intelectual , Micrognatismo/genética , Pescoço/anormalidades , Nevo Pigmentado/genética , Fatores de Transcrição/genéticaRESUMO
Zona pellucida (ZP), which is composed of at most four extracellular glycoproteins (ZP1, ZP2, ZP3, and ZP4) in mammals, shelters the oocytes and is vital in female fertility. Several studies have identified the indispensable roles of ZP1-3 in maintaining normal female fertility. However, the understanding of ZP4 is still very poor because only one study on ZP4-associated infertility performed in rabbits has been reported up to date. Here we investigated the function of mammalian Zp4 by creating a knockout (KO) rat strain (Zp4-/- rat) using CRISPR-Cas9-mediated DNA-editing method. The influence of Zp4 KO on ZP morphology and some pivotal processes of reproduction, including oogenesis, ovulation, fertilization, and pup production, were studied using periodic acid-Schiff's staining, superovulation, in vitro fertilization, and natural mating. The ZP morphology in Zp4-/- rats was normal, and none of these pivotal processes was affected. This study renewed the knowledge of mammalian Zp4 by suggesting that Zp4 was completely dispensable for female fertility.
Assuntos
Fertilidade/genética , Fertilização , Ratos/fisiologia , Glicoproteínas da Zona Pelúcida/genética , Animais , Feminino , Edição de Genes , Ratos/genética , Glicoproteínas da Zona Pelúcida/metabolismoRESUMO
We designed two near-infrared (NIR) lanthanide complexes [(L)2 -Nd(NO3 )3 ] (L=TPE2 -BPY for 1, TPE-BPY for 2) by employing aggregation-induced emission (AIE)-active tetraphenylethylene (TPE) derivatives as sensitizers, which possessed matched energy to NdIII , prevented competitive deactivation under aggregation, even shifted the excitation window toward 600â nm by twisted intramolecular charge transfer. Furthermore, benefiting from the 4 f electron shielding effect and antenna effect, the enhanced excitation energies of the AIE-active sensitizers by structural rigidification transferred into the inert NdIII excited state through 3 LMCT, affording the first aggregation-induced phosphorescence enhancement (AIPE)-active discrete NIR-emitting lanthanide complexes. As 1 equipped with more AIE-active TPE than 2, LâNd energy transfer efficiency in the former was higher than that in the latter under the same conditions. Consequently, the crystal of 1 exhibited one of the longest lifetimes (9.69â µs) among NdIII -based complexes containing C-H bonds.
Assuntos
Elementos da Série dos Lantanídeos , Elementos de Transição , Transferência de Energia , Espectroscopia de Luz Próxima ao InfravermelhoRESUMO
Herein, the reaction of (1-methyl-1 H-benzo[d]imidazol-2-yl)methanamine (L1) with Co(H2 O)6 Cl2 , in CH3 CN at 120 °C, leading to the 2,3,5,6-tetrakis(1-methyl-1 H-benzo[d]imidazol-2-yl)pyrazine (3), isolated as a dimeric cluster {[CoII 2 (3)Cl4 ]â 2 CH3 CN} (2), is reported. When O2 and H2 O are present, (1-methyl-1 H-benzo[d]imidazole-2-carbonyl)amide (HL1') is first formed and crystallized as [CoIII (L1)2 (L1')]Cl2 â 2 H2 O (4) before fusion of HL1' with L1, giving 1-methyl-N-(1-methyl-1 H-benzo[d]imidazol-2-carbonyl)-1 H-benzo[d]imidazol-2-carboxamide (HL2'') forming a one-dimensional (1D) chain of [CoII 3 (L2'')2 Cl4 ]n (5). The combination of crystallography and mass spectrometry (ESI-MS) of isolated crystals and the solutions taken from the reaction as a function time reveal seven intermediate steps leading to 2, but six steps for 5, for which a different sequence takes place. Control and isotope labeling experiments confirm the two carbonyl oxygen atoms in 5 originate from both air and water. The dependence on the metals, compared with FeCl3 â 6 H2 O leading to a stable triheteroarylmethyl radical, is quite astounding, which could be attributed to the different oxidation states of the metals and coordination modes confirmed by DFT calculations. This metal and valence dependent process is a very useful way for selectively obtaining these large molecules, which are unachievable by common organic synthesis.
RESUMO
Modification of commercially available biaryl monophosphine ligands via ruthenium(II)-catalyzed P(III)-directed-catalyzed ortho C-H secondary alkylation is described. The use of highly ring-strained norbornene as a secondary alkylating reagent is the key to this transformation. A series of highly bulky ligands with a norbornyl group were obtained in excellent yields. The modified ligands with secondary alkyl group outperformed common substituted phosphines in the Suzuki-Miyaura cross-coupling reaction at a ppm mole level of Pd catalyst.
RESUMO
The salts {[Ln2 Ln*(Hhmq)3 (OAc)3 (hfac)2 ]+ [Ln*(hfac)3 (OAc)(MeOH)]- } (Hhmq=2-methanolquinolin-8-oxide, hfac=hexafluoroacetylacetonate; Ln, Ln*=Er, Gd, Yb) feature a discrete heteronuclear cation consisting of two types of lanthanide atoms. The quinolinoxy O-atom serves as a µ2 -bridge to two Ln atoms and as a µ3 -bridge to all three atoms, with metalâ â â metal distances being around 3.7â Å. For 1 ([Yb2 Er]+ ), near-infrared downshifted luminescence is switched to competitive upconversion luminescence upon irradiation by a 980â nm laser under an extremely low excitation power (0.288 W cm-2 ) through introduction of fluoride ions. The stability of 1 after addition of fluoride was confirmed by powder X-ray diffraction and multistage mass spectrometry, associated with the 1 Hâ NMR of 6 ([La2 Eu]+ ). More importantly, the at least 20-fold enhancement of the quantum yield in non-deuterated solvents at room temperature under low power densities (2â W cm-2 ) is the highest among the few molecular examples reported.
RESUMO
Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H4 L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H3 L') was found to be metal-assisted, occurs under solvothermal conditions (H2 O/CH3 OH), and leads to [MnII 4 (H3 L)4 Cl2 ]Cl2 â 5 H2 Oâ 5 CH3 OH (Mn4 L4 ) and [MnII 4 (H2 L')6 (µ3 -OH)]Clâ 4 CH3 OHâ H2 O (Mn4 L'6 ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn4 L4 from the reactants via [MnL] and [Mn2 L2 ] below 80 °C, and then disassembly to [MnL] and [MnL2 ] followed by ligand modification before reassembly to Mn4 L'6 via [MnL'], [MnL'2 ], and [Mn2 L'3 ] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn4 Lx L'6-x ] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during "black-box" reactions.
RESUMO
We have recently reported a strongly luminescent osmium(VI) nitrido complex [OsVI(N)(NO2-L)(CN)3]- [HNO2-L = 2-(2-hydroxy-5-nitrophenyl)benzoxazole]. The excited state of this complex readily activates the strong C-H bonds of alkanes and arenes (Commun. Chem. 2019, 2, 40). In this work, we attempted to tune the excited-state properties of this complex by introducing various substituents on the bidentate L ligand. The series of nitrido complexes were characterized by IR, UV/vis, 1H NMR, and electrospray ionization mass spectrometry. The molecular structures of five of the nitrido compounds have been determined by X-ray crystallography. The photophysical and electrochemical properties of these complexes have been investigated. The luminescence of these nitrido complexes in the solid state, in a CH2Cl2 solution, and in a CH2Cl2 solid matrix at 77 K glassy medium clearly shows that these emissions are due to 3LML'CT [L ligand to Os≡N] phosphorescence. The presence of strongly electron-withdrawing substituents in these complexes enhances the LML'CT emission. Our result demonstrates that the excited-state properties of this novel class of luminescent osmium(VI) nitrido complexes can be fine-tuned by introducing various substituents on the bidentate L ligand.
RESUMO
The in situ tracking of the pyrolysis of a binary molecular cluster [Zn7 (µ3 -CH3 O)6 (L)6 ][ZnLCl2 ]2 is presented with one brucite disk and two mononuclear fragments (L=mmimp: 2-methoxy-6-((methylimino)-methyl)phenolate) to porous carbon using TG-MS from 30 to 900 °C. Following up the spilled gas product during the decomposed reaction of zinc cluster along the temperature rising, and in conjunction with XRD, SEM, BET and other materials characterization, where three key steps were observed: 1)â cleavage of the bulky external ligand; 2)â reduction of ZnO and 3)â volatilization of Zn. The real-time-dependent phase-sequential evolution of the remaining products and the processing of pore forming template transformation are proposed simultaneously. The porous carbon structure featuring a uniform nano-sized pore distribution synthesized at 900 °C with the highest surface area of 1644â m2 g-1 and pore volume of 0.926â cm3 g-1 exhibits the best known capacitance of 662â F g-1 at 0.5â A g-1 .