Biomimetic Impact Protective Supramolecular Polymeric Materials Enabled by Quadruple H-Bonding.

Nature has been inspiring scientists to fabricate impact protective materials for applications in various aspects. However, it is still challenging to integrate flexible, stiffness-changeable, and protective properties into a single polymer, although these merits are of great interest in many burgeoning areas. Herein, we report an impact-protective supramolecular polymeric material (SPM) with unique impact-hardening and reversible stiffness-switching characteristics by mimicking sea cucumber dermis. The emergence of softness-stiffness switchability and subsequent protective properties relies on the dynamic aggregation of the nanoscale hard segments in soft transient polymeric networks modulated by quadruple H-bonding. As such, we demonstrate that our SPM could efficiently reduce the impact force and increase the buffer time of the impact. Importantly, we elucidate the underlying mechanism behind the impact hardening and energy dissipation in our SPM. Based on these findings, we fabricate impact- and puncture-resistant demos to show the potential of our SPM for protective applications.

Soft Robotics Enables Neuroprosthetic Hand Design.

Development and implementation of neuroprosthetic hands is a multidisciplinary field at the interface between humans and artificial robotic systems, which aims at replacing the sensorimotor function of the upper-limb amputees as their own. Although prosthetic hand devices with myoelectric control can be dated back to more than 70 years ago, their applications with anthropomorphic robotic mechanisms and sensory feedback functions are still at a relatively preliminary and laboratory stage. Nevertheless, a recent series of proof-of-concept studies suggest that soft robotics technology may be promising and useful in alleviating the design complexity of the dexterous mechanism and integration difficulty of multifunctional artificial skins, in particular, in the context of personalized applications. Here, we review the evolution of neuroprosthetic hands with the emerging and cutting-edge soft robotics, covering the soft and anthropomorphic prosthetic hand design and relating bidirectional neural interactions with myoelectric control and sensory feedback. We further discuss future opportunities on revolutionized mechanisms, high-performance soft sensors, and compliant neural-interaction interfaces for the next generation of neuroprosthetic hands.

A soft neuroprosthetic hand providing simultaneous myoelectric control and tactile feedback.

Neuroprosthetic hands are typically heavy (over 400 g) and expensive (more than US$10,000), and lack the compliance and tactile feedback of human hands. Here, we report the design, fabrication and performance of a soft, low-cost and lightweight (292 g) neuroprosthetic hand that provides simultaneous myoelectric control and tactile feedback. The neuroprosthesis has six active degrees of freedom under pneumatic actuation, can be controlled through the input from four electromyography sensors that measure surface signals from residual forearm muscles, and integrates five elastomeric capacitive sensors on the fingertips to measure touch pressure so as to enable tactile feedback by eliciting electrical stimulation on the skin of the residual limb. In a set of standardized tests performed by two individuals with transradial amputations, we show that the soft neuroprosthetic hand outperforms a conventional rigid neuroprosthetic hand in speed and dexterity. We also show that one individual with a transradial amputation wearing the soft neuroprosthetic hand can regain primitive touch sensation and real-time closed-loop control.

High-Stretchability, Ultralow-Hysteresis ConductingPolymer Hydrogel Strain Sensors for Soft Machines.

Highly stretchable strain sensors based on conducting polymer hydrogel are rapidly emerging as a promising candidate toward diverse wearable skins and sensing devices for soft machines. However, due to the intrinsic limitations of low stretchability and large hysteresis, existing strain sensors cannot fully exploit their potential when used in wearable or robotic systems. Here, a conducting polymer hydrogel strain sensor exhibiting both ultimate strain (300%) and negligible hysteresis (<1.5%) is presented. This is achieved through a unique microphase semiseparated network design by compositing poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanofibers with poly(vinyl alcohol) (PVA) and facile fabrication by combining 3D printing and successive freeze-thawing. The overall superior performances of the strain sensor including stretchability, linearity, cyclic stability, and robustness against mechanical twisting and pressing are systematically characterized. The integration and application of such strain sensor with electronic skins are further demonstrated to measure various physiological signals, identify hand gestures, enable a soft gripper for objection recognition, and remote control of an industrial robot. This work may offer both promising conducting polymer hydrogels with enhanced sensing functionalities and technical platforms toward stretchable electronic skins and intelligent robotic systems.

Modulation of charged a1/a2 domains and piezoresponses of tensile strained PbTiO3 films by the cooling rate.

Controlling domain width, orientation, and patterns in oxide ferroelectrics are not only important for fundamental research but also for potential electronic application. Here, a series of PbTiO3 thin films under various cooling rates were deposited on (110)-oriented NdScO3 substrates by pulsed laser deposition and investigated by using conventional transmission electron microscopy, Cs-corrected scanning TEM and piezoresponse force microscopy. Contrast analysis and electron diffraction revealed that PbTiO3 films are a1/a2 domain patterns under large tensile strains with different cooling rates. The a1/a2 domains distribute periodically and the domain width increases with decrease in the cooling rates. Upon increasing the cooling rate, the domain density increases and the domain configurations become complicated. There are special square frame-like domain patterns with charged domain walls found in the PTO films with the fast cooling rate. PFM measurement shows that the PTO films with high cooling rate exhibit enhanced piezoresponse behavior which is ascribed to the high density domain/domain walls and special domain configurations. The formation mechanism of the different domain configurations is discussed in terms of the effect of cooling rates, defects and thermal kinetics. These results are expected to provide useful information for domain/domain wall control and thus facilitate further modulation of the properties for potential applications.

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers.

Soft pneumatic network actuators have become one of the most promising actuation devices in soft robotics which benefits from their large bending deformation and low input. However, their monotonous bending motion form in two-dimensional (2-D) space keeps them away from wide applications. This paper presents a detailed fabrication method of soft pneumatic network actuators with oblique chambers, to explore their motions in three-dimensional (3-D) space. The design of oblique chambers enables actuators with tunable coupled bending and twisting capabilities, which gives them the possibility to move dexterously in flexible manipulators, to become biologically inspired robots and medical devices. The fabrication process is based on the molding method, including the silicone elastomer preparation, chamber and base parts fabrication, actuator assembly, tubing connections, checks for leaks, and actuator repair. The fabrication method guarantees the rapid manufacturing of a series of actuators with only a few modifications in the molds. The test results show the high quality of the actuators and their prominent bending and twisting capabilities. Experiments of the gripper demonstrate the advantages of the development in adapting to objects with different diameters and providing sufficient friction.

Oxygen Vacancy Ordering Modulation of Magnetic Anisotropy in Strained LaCoO3- x Thin Films.

Oxygen vacancy configurations and concentration are coupled with the magnetic, electronic, and transport properties of perovskite oxides, and manipulating the physical properties by tuning the vacancy structures of thin films is crucial for applications in many functional devices. In this study, we report a direct atomic resolution observation of the preferred orientation of vacancy ordering structure in the epitaxial LaCoO3- x (LCO) thin films under various strains from large compressive to large tensile strain utilizing scanning transmission electron microscopy (STEM). Under compressive strains, the oxygen vacancy ordering prefers to be along the planes parallel to the heterointerface. Changing the strains from compressive to tensile, the oxygen vacancy planes turn to be perpendicular to the heterointerface. Aberration-corrected STEM images, electron diffractions, and X-ray diffraction combined with X-ray photoelectron spectroscopy demonstrate that the vacancy concentration increases with increasing misfit strains and vacancy distribution is more ordered and homogeneous. The temperature-dependent magnetization curves show the Curie temperature increases, displaying a positive correlation with the misfit strains. With change in the strain from compressive to tensile, anisotropy fields vary and show large values under tensile strains. It is proposed that oxygen vacancy concentration and preferred ordering planes are responsible for the enhanced magnetic properties of LCO films. Our results have realized a controllable preparation of oxygen vacancy ordering structures via strains and thus provide an effective method to regulate and optimize the physical properties such as magnetic properties by strain engineering.