RESUMO
Although polylactic acid (PLA) represents a pivotal biodegradable polymer, its biodegradability has inadvertently overshadowed the development of effective recycling techniques, leading to the potential wastage of carbon resources. The photoreforming-recycling approach for PLA exhibits significant potential in terms of concepts and methods. However, the reaction faces enormous challenges due to the limited selectivity of organic oxidation products as well as the increased costs and challenging separation of organic products associated with alkali-solution-assisted prehydrolysis. Herein, we report an alkali-free direct-photoreforming pathway for real-world PLA plastics utilizing the Pd-CdS photocatalyst under visible-light illumination, obviating the need for chemical pretreatment of PLA. The devised pathway successfully produces H2 at a rate of 49.8 µmol gcat.-1 h-1, sustained over 100 h, and exhibits remarkable selectivity toward pyruvic acid (95.9% in liquid products). Additionally, experimental findings elucidate that Pd sites not only function as a typical cocatalyst for enhancing the photocatalytic evolution of H2 but also suppress competitive side reactions (e.g., lactic acid coupling or decarboxylation), consequently augmenting the yield and selectivity of pyruvic acid and H2. This investigation provides a straightforward and sustainable direct-photoreforming route capable of simultaneously mitigating and repurposing plastic waste into valuable chemicals, thus offering a promising solution to the current environmental challenges.
RESUMO
As a potential candidate for photocatalytic H2 production from water splitting, Ta2O5 catalyst presents suitable conduction and valence band positions, but suffers from poor charge transfer ability, which seriously limits its photocatalytic performance enhancement. Here, a facile and eco-friendly hydrothermal method was developed for the fabrication of one-dimensional (1D) Ta2O5 nanorods using the freshly precipitated tantalic acids as the precursors. An oriented attachment mechanism was proposed for the growth of Ta2O5 nanorods. Moreover, the present synthetic approach was further extended to direct synthesis of nine kinds of alkaline tantalates and alkaline-earth tantalates nanostructures, suggesting its general applicability. A significant increase in activity in photocatalytic H2 production was revealed on 1D Ta2O5 nanorods. The improved photocatalytic H2 production activity of Ta2O5 nanorods was mainly attributed to its 1D nanorods structure with high crystallization and large speciï¬c surface areas as well as excellent charge transfer efficiency.
RESUMO
Electrochemical acetylene reduction (EAR) employing Cu catalysts represents an environmentally friendly and cost-effective method for ethylene production and purification. However, Cu-based catalysts encounter product selectivity issues stemming from carbon-carbon coupling and other side reactions. We explored the use of secondary metals to modify Cu-based catalysts and identified Cd decoration as particular effective. Cd decoration demonstrated a high ethylene Faradaic efficiency (FE) of 98.38 % with well-inhibited carbon-carbon coupling reactions (0.06 % for butadiene FE at -0.5â V versus reversible hydrogen electrode) in a 5â vol % acetylene gas feed. Notably, ethylene selectivity of 99.99 % was achieved in the crude ethylene feed during prolonged stability tests. Theoretical calculations revealed that Cd metal accelerates the water dissociation on neighboring Cu surfaces allowing more H* to participate in the acetylene semi-hydrogenation, while increasing the energy barrier for carbon-carbon coupling, thereby contributing to a high ethylene semi-hydrogenation efficiency and significant inhibition of carbon-carbon coupling. This study provides a paradigm for a deeper understanding of secondary metals in regulating the product selectivity of EAR electrocatalysts.
RESUMO
Enormous advances in photothermal catalysis have been made over the years, whereas the temperature assessment still remains controversial in the majority of photothermal catalytic systems. Herein, we methodically uncovered the phenomenon of temperature determination bias arising from prominent temperature differences in gas-solid photothermal catalytic systems, which extensively existed yet has been overlooked in most relevant cases. To avoid the interference of temperature bias, we developed a universal protocol for reliable temperature evaluation of gas-solid photothermal catalytic reactions, with emphasis on eliminating the temperature gradient and temperature fluctuation of catalyst layer via optimizing the reaction system. This work presents a functional and credible practice for temperature detection, calling attention to addressing the effects of temperature differences, and reassessing the actual temperature-based performances in gas-solid photothermal catalysis.
RESUMO
Photothermal catalysis is one of the most promising green catalytic technologies, while distinguishing the effects of hot electrons and local heating remains challenging. Herein, we reported that the actual reaction temperature of photothermal ammonia synthesis over carbon-supported Ru catalyst can be measured based on Le Chatelier's principle, enabling the hot-electron contribution to be quantified. By excluding local heating effects, we established that the activation energy via photothermal catalysis was much lower than that of thermocatalysis (54.9 vs. 126.0â kJ mol-1 ), stemming from hot-electron injection lowering the energy barriers for both N2 dissociation and intermediates hydrogenation. Furthermore, hot-electron injection acted to suppress carbon support methanation, giving the catalyst outstanding operational stability over 1000â h. This work provides new insights into the hot-electron effects in ammonia synthesis, guiding the design of high-performance photothermal catalysts.
Assuntos
Carbono , Rutênio , Amônia , Elétrons , CatáliseRESUMO
Selective oxidation of alcohols under mild conditions remains a long-standing challenge in the bulk and fine chemical industry, which usually requires environmentally unfriendly oxidants and bases that are difficult to separate. Here, a plasmonic catalyst of nitrogen-doped carbon-encapsulated metallic Co nanoparticles (Co@NC) with an excellent catalytic activity towards selective oxidation of alcohols is demonstrated. With light as only energy input, the plasmonic Co@NC catalyst effectively operates via combining action of the localized surface-plasmon resonance (LSPR) and the photothermal effects to achieve a factor of 7.8â times improvement compared with the activity of thermocatalysis. A high turnover frequency (TOF) of 15.6â h-1 is obtained under base-free conditions, which surpasses all the reported catalytic performances of thermocatalytic analogues in the literature. Detailed characterization reveals that the d states of metallic Co gain the absorbed light energy, so the excitation of interband d-to-s transitions generates energetic electrons. LSPR-mediated charge injection to the Co@NC surface activates molecular oxygen and alcohol molecules adsorbed on its surface to generate the corresponding radical species (e.g., â O2 - , CH3 Oâ and R-â CH-OH). The formation of multi-type radical species creates a direct and forward pathway of oxidative esterification of benzyl alcohol to speed up the production of esters.
RESUMO
Methane conversion to higher hydrocarbons requires harsh reaction conditions due to high energy barriers associated with C-H bond activation. Herein, we report a systematic investigation of photocatalytic oxidative coupling of methane (OCM) over transition-metal-loaded ZnO photocatalysts. A 1â wt % Au/ZnO delivered a remarkable C2 -C4 hydrocarbon production rate of 683â µmol g-1 h-1 (83 % C2 -C4 selectivity) under light irradiation with excellent photostability over two days. The metal type and its interaction with ZnO strongly influence the selectivity toward C-C coupling products. Photogenerated Zn+ -O- sites enable CH4 activation to methyl intermediates (*CH3 ) migrating onto adjacent metal nanoparticles. The nature of the *CH3 -metal interaction controls the OCM products. In the case of Au, strong d-σ orbital hybridization reduces metal-C-H bond angles and steric hindrance, thereby enabling efficient methyl coupling. Findings indicate the d-σ center may be a suitable descriptor for predicting product selectivity during OCM over metal/ZnO photocatalysts.
RESUMO
The activation of water molecules in thermal catalysis typically requires high temperatures, representing an obstacle to catalyst development for the low-temperature water-gas shift reaction (WGSR). Plasmonic photocatalysis allows activation of water at low temperatures through the generation of light-induced hot electrons. Herein, we report a layered double hydroxide-derived copper catalyst (LD-Cu) with outstanding performance for the low-temperature photo-driven WGSR. LD-Cu offered a lower activation energy for WGSR to H2 under UV/Vis irradiation (1.4â W cm-2 ) compared to under dark conditions. Detailed experimental studies revealed that highly dispersed Cu nanoparticles created an abundance of hot electrons during light absorption, which promoted *H2 O dissociation and *H combination via a carboxyl pathway, leading to the efficient production of H2 . Results demonstrate the benefits of exploiting plasmonic phenomena in the development of photo-driven low-temperature WGSR catalysts.
RESUMO
Photocatalytic CO2reduction reaction (CO2RR) is believed to be a promising remedy to simultaneously lessen CO2emission and obtain high value-added products, but suffers from the thwarted activity of photocatalyst and poor selectivity of product. Over the past decade, aided by the significant advances in nanotechnology, the atom manufacturing of photocatalyst, including vacancies, dopants, single-atom catalysts, strains, have emerged as efficient approaches to precisely mediate the reaction intermediates and processes, which push forward in the rapid development of highly efficient and selective photocatalytic CO2RR. In this review, we summarize the recent developments in highly efficient and/or selective photocatalysts toward CO2RR with the special focus on various atom manufacturing. The mechanisms of these atom manufacturing from active sites creation, light absorbability, and electronic structure modulation are comprehensively and scientifically discussed. In addition, we attempt to establish the structure-activity relationship between active sites and photocatalytic CO2RR capability by integrating theoretical simulations and experimental results, which will be helpful for insights into mechanism pathways of CO2RR over defective photocatalysts. Finally, the remaining challenges and prospects in this field to improve the photocatalytic CO2RR performances are proposed, which can shed some light on designing more potential photocatalysts through atomic regulations toward CO2conversion.
RESUMO
The increasing energy and environmental problems have made clean energy-driven catalysis a hot research topic. Methane is an earth-abundant raw material but difficult to be converted by thermochemical processes. It is of great significance to seek novel strategies to convert methane into high-value chemicals. Herein, we synthesize a series of transition metal catalysts based on layered double hydroxide precursors which were used for photothermal methane nonoxidative coupling reactions. The strong photothermal and chemisorption effects of the derived transition metal nanostructures allow the efficient activation of methane molecules. Among them, alumina-supported metallic Ni and NiCo-alloy catalysts show excellent methane nonoxidative coupling activities, achieved hydrogen production rates of 4816.53µmol g-1h-1and 5130.9µmol g-1h-1, accompanied by liquid fuels production rates of 59.2 mg g-1h-1and 63 mg g-1h-1, respectively. The findings, therefore, provide a new strategy for methane nonoxidative coupling driven by light energy at mild conditions.
RESUMO
Developing efficient and stable Pt-based oxygen reduction reaction (ORR) catalysts is a way to promote the large-scale application of fuel cells. Pt-based alloy nanowires are promising ORR catalysts, but their application is hampered by activity loss caused by structural destruction during long-term cycling. Herein, the preparation of ordered PtFeIr intermetallic nanowire catalysts with an average diameter of 2.6â nm and face-centered tetragonal structure (fct-PtFeIr/C) is reported. A silica-protected strategy prevents the deformation of PtFeIr nanowires during the phase transition at high temperature. The as-prepared fct-PtFeIr/C exhibited superior mass activity for ORR (2.03â A mgPt -1 ) than disordered PtFeIr nanowires with face-centered cubic structure (1.11â A mgPt -1 ) and commercial Pt/C (0.21â A mgPt -1 ). Importantly, the structure and electrochemical performance of fct-PtFeIr/C were maintained after stability tests, showing the advantages of the ordered structure.
RESUMO
Photocatalytic CO2 reduction reaction (CO2 RR) is an attractive process to convert CO2 into valuable chemicals. But this reaction is often restricted by the poor mass transfer of CO2 in the liquid phase. Here, we have developed a triphase photocatalytic CO2 RR system by supporting Ag-decorated TiO2 nanoparticles at a gas-water boundary with hydrophobic-hydrophilic abrupt interfacial wettability. Such a triphase system allows the rapid delivery of gas-phase CO2 to the surface of photocatalysts while maintaining an efficient water supply and uncovered active sites. Ag-TiO2 supported at the gas-water boundary showed a CO2 reduction rate of 305.7â µmol g-1 h-1 , without hole scavengers, approximately 8 times higher than the nanoparticles dispersed in the liquid phase. Even using diluted CO2 (10 %) as the reactant, the CO2 RR activity was superior to most reported Ag-TiO2 based photocatalysts using pure CO2 . The findings provide a general strategy to promote the interfacial CO2 mass transfer to improve photoactivity and selectivity.
RESUMO
Nitrate is an important raw material for chemical fertilizers, but it is industrially manufactured in multiple steps at high temperature and pressure, urgently motivating the design of a green and sustainable strategy for nitrate production. We report the photosynthesis of nitrate from N2 and O2 on commercial TiO2 in a flow reactor under ambient conditions. The TiO2 photocatalyst offered a high nitrate yield of 1.85â µmol h-1 as well as a solar-to-nitrate energy conversion efficiency up to 0.13 %. We combined reactivity and in situ Fourier transform infrared spectroscopy to elucidate the mechanism of nitrate formation and unveil the special role of O2 in N≡N bond dissociation. The mechanistic insight into charge-involved N2 oxidation was further demonstrated by in situ transient absorption spectroscopy and electron paramagnetic resonance. This work exhibits the mechanistic origin of N2 photooxidation and initiates a potential method for triggering inert catalytic reactions.
RESUMO
Recently, heterogeneous photocatalysts have achieved much interest on account of their great potential applications in resolving many tough energy and environmental troubles around the world through an ecologically sustainable way. Heterogeneous nanocomposites composed of graphitic carbon nitride (g-C3 N4 ) and carbon dots (CDs) possess broad spectrum absorption, appropriate electronic band structures, rapid carrier mobility, abundant reserves, excellent chemical stability, and facile synthesis methods, which make them promising composite photocatalysts for suitable applications such as photocatalytic solar fuels production and contaminant decomposition. With the rapid development in photocatalysis by hybridization of g-C3 N4 and CDs, a systematic summary and prospection of performance improvement are urgent and meaningful. This review first focuses on various kinds of effectively synthetic methods of composites. Following, the strategies available for enhanced performance, including morphology optimization, spectral absorption improvement, ternary or quaternary composition hybrid, lateral or vertical heterostructures construction, heteroatom doping, and so forth, are fully discussed. Then, the applications mainly in efficient photocatalytic hydrogen generation, photocatalytic carbon dioxide reduction, and organic pollutants degradation are systematically demonstrated. Finally, the remaining issues and prospect of further development are proposed as some kind of guidance for powerful combination of g-C3 N4 and CDs with high efficiency to photocatalysis.
RESUMO
Solar energy is a green and sustainable clean energy source. Its rational use can alleviate the energy crisis and environmental pollution. Directly converting solar energy into heat energy is the most efficient method among all solar conversion strategies. Recently, various environmental and energy applications based on nanostructured photothermal materials stimulated the re-examination of the interfacial solar energy conversion process. The design of photothermal nanomaterials is demonstrated to be critical to promote the solar-to-heat energy conversion and the following physical and chemical processes. This review introduces the latest photothermal nanomaterials and their nanostructure modulation strategies for environmental (seawater evaporation) and catalytic (C1 conversion) applications. We present the research progress of photothermal seawater evaporation based on two-dimensional and three-dimensional porous materials. Then, we describe the progress of photothermal catalysis based on layered double hydroxide derived nanostructures, hydroxylated indium oxide nanostructures, and metal plasmonic nanostructures. Finally, we present our insights concerning the future development of this field.
RESUMO
Photocatalysis as one of the future environment technologies has been investigated for decades. Despite great efforts in catalyst engineering, the widely used powder dispersion and photoelectrode systems are still restricted by sluggish interfacial mass transfer and chemical processes. Here we develop a scalable bilayer paper from commercialized TiO2 and carbon nanomaterials, self-supported at gas-liquid-solid interfaces for photothermal-assisted triphase photocatalysis. The photogeneration of reactive oxygen species can be facilitated through fast oxygen diffusion over triphase interfaces, while the interfacial photothermal effect promotes the following free radical reaction for advanced oxidation of phenol. Under full spectrum irradiation, the triphase system shows 13 times higher reaction rate than diphase controlled system, achieving 88.4 % mineralization of high concentration phenol within 90â min full spectrum irradiation. The bilayer paper also exhibits high stability over 40 times cycling experiments and sunlight driven feasibility, showing potentials for large scale photocatalytic applications by being further integrated into a triphase flow reactor.
RESUMO
NiFe-layered double hydroxides (NiFe-LDH) are among the most active catalysts developed to date for the oxygen evolution reaction (OER) in alkaline media, though their long-term OER stability remains unsatisfactory. Herein, we reveal that the stability degradation of NiFe-LDH catalysts during alkaline OER results from a decreased number of active sites and undesirable phase segregation to form NiOOH and FeOOH, with metal dissolution underpinning both of these deactivation mechanisms. Further, we demonstrate that the introduction of cation-vacancies in the basal plane of NiFe LDH is an effective approach for achieving both high catalyst activity and stability during OER. The strengthened binding energy between the metals and oxygen in the LDH sheets, together with reduced lattice distortions, both realized by the rational introduction of cation vacancies, drastically mitigate metal dissolution from NiFe-LDH under high oxidation potentials, resulting in the improved long-term OER stability. In addition, the cation vacancies (especially M3+ vacancies) accelerate the evolution of surface γ-(NiFe)OOH phases, thereby boosting the OER activity. The present study highlights that tailoring atomic cation-vacancies is an important strategy for the development of active and stable OER electrocatalysts.
RESUMO
Designing bifunctional catalysts capable of driving the electrochemical hydrogen evolution reaction (HER) and also H2 evolution via the hydrolysis of hydrogen storage materials such as ammonia borane (AB) is of considerable practical importance for future hydrogen economies. Herein, we systematically examined the effect of tensile lattice strain in CoRu nanoalloys supported on carbon quantum dots (CoRu/CQDs) on hydrogen generation by HER and AB hydrolysis. By varying the Ru content, the lattice parameters and Ru-induced lattice strain in the CoRu nanoalloys could be tuned. The CoRu0.5 /CQDs catalyst with an ultra-low Ru content (1.33 wt.%) exhibited excellent catalytic activity for HER (η=18â mV at 10â mA cm-2 in 1â M KOH) and extraordinary activity for the hydrolysis of AB with a turnover frequency of 3255.4â mol ( H 2 ) mol-1 (Ru) min-1 or 814.7â mol ( H 2 ) mol-1 (cat) min-1 at 298â K, respectively, representing one of the best activities yet reported for AB hydrolysis over a ruthenium alloy catalyst. Moreover, the CoRu0.5 /CQDs catalyst displayed excellent stability during each reaction, including seven alternating cycles of HER and AB hydrolysis. Theoretical calculations revealed that the remarkable catalytic performance of CoRu0.5 /CQDs resulted from the optimal alloy electronic structure realized by incorporating small amounts of Ru, which enabled fast interfacial electron transfer to intermediates, thus benefitting H2 evolution kinetics. Results support the development of new and improved catalysts HER and AB hydrolysis.
RESUMO
Cu2 O, a low-cost, visible light responsive semiconductor photocatalyst represents an ideal candidate for visible light driven photocatalytic reduction of N2 to NH3 from the viewpoint of thermodynamics, but it remains unexplored. Reported here is the successful synthesis of uniformly sized and ultrafine Cu2 O platelets, with a lateral size of <3â nm, by the in situ topotactic reduction of a CuII -containing layered double hydroxide with ascorbic acid. The supported ultrafine Cu2 O offered excellent performance and stability for the visible light driven photocatalytic reduction of N2 to NH3 (the Cu2 O-mass-normalized rate as high as 4.10â mmol g Cu 2 O -1 h-1 at λ>400â nm), with the origin of the high activity being long-lived photoexcited electrons in trap states, an abundance of exposed active sites, and the underlying support structure. This work guides the future design of ultrafine catalysts for NH3 synthesis and other applications.
RESUMO
Photo/electrocatalytic ammonia synthesis has recently developed fast while the ammonia yields over state-of-the-art photo/electrocatalysts are still very moderate. Such low concentration of synthesized NH3 brings about a challenge to the reliable quantification of the product in photo/electrocatalysis. Notably, we found that the quantitative detection of ammonia concentration below 0.2 ppm is error-prone, which is likely the case happening in the majority of photo/electrocatalytic NH3 synthesis, thus arising concerns about the rationality and accuracy for low-concentration ammonia quantification in these processes. Herein, we discuss the methodology used and analyze the reliability of various detection methods for the detection of trace ammonia in aqueous media. The challenges facing the detection of low concentration of ammonia in photo/electrocatalysis can be overcome by integration with multiple detection methods. According to the data presented, we also propose an effective criterion for precise quantification of ammonia, avoiding the unreasonable comparisons in photo/electrocatalytic ammonia synthesis.