RESUMO
The catalytic mechanisms of nitrogen reduction reaction (NRR) on the pristine and Co/α-MoC(001) surfaces were explored by density functional theory calculations. The results show that the preferred pathway is that a direct N≡N cleavage occurs first, followed by continuous hydrogenations. The production of second NH3 molecule is identified as the rate-limiting step on both systems with kinetic barriers of 1.5 and 2.0â eV, respectively, indicating that N2 -to-NH3 transformation on bimetallic surface is more likely to occur. The two components of the bimetallic center play different roles during NRR process, in which Co atom does not directly participate in the binding of intermediates, but primarily serves as a reservoir of H atoms. This special synergy makes Co/α-MoC(001) have superior activity for ammonia synthesis. The introduction of Co not only facilitates N2 dissociation, but also accelerates the migration of H atom due to the antibonding characteristic of Co-H bond. This study offers a facile strategy for the rational design and development of efficient catalysts for ammonia synthesis and other reactions involving the hydrogenation processes.
RESUMO
As typical representatives of group III chalcogenides, InSe, α-In2Se3, and ß'-In2Se3 have drawn considerable interest in the domain of photoelectrochemistry. However, the microscopic mechanisms of carrier dynamics in these systems remain largely unexplored. In this work, we first reveal that hot electrons in the three systems have different cooling rate stages and long-lived hot electrons, through the utilization of density functional theory calculations and nonadiabatic molecular dynamics simulations. Furthermore, the ferroelectric polarization of α-In2Se3 weakens the nonadiabatic coupling of the nonradioactive recombination, successfully competing with the narrow bandgap and slow dephasing process, and achieving both high optical absorption efficiency and long carrier lifetime. In addition, we demonstrate that the ferroelectric polarization of α-In2Se3 not only enables the formation of the double type-II band alignment in the InSe/α-In2Se3/InSe heterostructure, with the top and bottom InSe sublayers acting as acceptors and donors, respectively, but also eliminates the hindrance of the built-in electric field at the interface, facilitating an ultrafast interlayer carrier transfer in the heterojunction. This work establishes an atomic mechanism of carrier dynamics in InSe, α-In2Se3, and ß'-In2Se3 and the regulatory role of the ferroelectric polarization on the charge carrier dynamics, providing a guideline for the design of photoelectronic materials.
RESUMO
Pursuing effective and generalized strategies for modulating the electronic structures of atomically dispersed nanozymes with remarkable catalytic performance is exceptionally attractive yet challenging. Herein, we developed a facile "formamide condensation and carbonization" strategy to fabricate a library of single-atom (M1-NC; 6 types) and dual-atom (M1/M2-NC; 13 types) metal-nitrogen-carbon nanozymes (M = Fe, Co, Ni, Mn, Ru, Cu) to reveal peroxidase- (POD-) like activities. The Fe1Co1-NC dual-atom nanozyme with Fe1-N4/Co1-N4 coordination displayed the highest POD-like activity. Density functional theory (DFT) calculations revealed that the Co atom site synergistically affects the d-band center position of the Fe atom site and served as the second reaction center, which contributes to better POD-like activity. Finally, Fe1Co1 NC was shown to be effective in inhibiting tumor growth both in vitro and in vivo, suggesting that diatomic synergy is an effective strategy for developing artificial nanozymes as novel nanocatalytic therapeutics.
Assuntos
Peroxidase , Peroxidases , Carbono , Catálise , CorantesRESUMO
Thorium oxide has many important applications in industry. In this article, theoretical calculations have been carried out to explore the hydrolysis reactions of the ThOn (n=1-3) clusters. The reaction mechanisms of the O-deficient ThO and the O-rich ThO3 are compared with the stoichiometric ThO2 . The theoretical results show good agreement with the prior experiments. It is shown that the hydrolysis mainly occurred on the singlet potential surface. The overall reactions consist of two hydrolysis steps which are all favourable in energy. The effects of oxygen content on the hydrolysis are elucidated. Interestingly, among them, the peroxo group O2 2- in ThO3 is converted to the HOO- ligand, behaving like the terminal O2- in the hydrolysis which is transformed into the HO- groups. In addition, natural bond orbital (NBO) analyses were employed to further understand the bonding of the pertinent species and to interpret the differences in hydrolysis.
RESUMO
Nanoribbon construction and modification with functional groups are important methods to improve the performance of photocatalysts. In this paper, density functional theory (DFT) calculations are applied to assess the electron absorption capacity of different model structures in the photocatalytic CO2 reduction reaction (CO2RR), i.e., melon-based carbon nitride nanoribbons (MNRs) and edge-modified melon-based carbon nitride nanoribbons (X-MNRs, X = NO2, CF3, CN, CHO, F, Cl, CîCH, OH, SH, CH3, and H). It is found that X-MNRs (X = NO2, CN, CHO, CCH, OH, and H) have a significantly reduced band gap. Meanwhile, the VBM and CBM are effectively separated with the same optical absorption wavelength range, agreeing with the experimental observations. More importantly, the Gibbs free energy difference of the CO2RR rate-determining step is greatly reduced in MNRs, CHO-MNRs, CN-MNRs etc. with the formation of CO or HCOOH. The mechanism investigation indicates that the materials design via edge-group modification can optimize the CO2RR process.
RESUMO
Single-atom catalysts (SACs) are emerging as promising catalysts in the field of the electrocatalytic CO2 reduction reaction (CO2RR). Herein, a series of 3d to 5d transition metal atoms supported on triazine-based graphite carbon nitride (TM@TGCN) as a CO2 reduction catalyst are studied via density functional theory computations. Eventually, four TM@TGCN catalysts (TM = Ni, Rh, Os, and Ir) are selected using a five-step screening method, in which Rh@TGCN and Ni@TGCN show a low limiting potential of -0.48 and -0.58 V, respectively, for reducing CO2 to CH4. The activity mechanism shows that the catalysts with a negative d-band center and optimal positive charge can improve the CO2RR performance. Our study provides theoretical guidance for the rational design of highly active and selective catalysts.
RESUMO
Doping is an efficient strategy for improving the photocatalytic activity and tuning the electronic structure of carbon nitride. Selenium-doped melon carbon nitride (Se-doped melon CN) as a promising photocatalyst for CO2 reduction is investigated using density functional theory calculations. In addition, considering the special role of a cocatalyst in CO2 reduction, we have explored the electronic and optical properties of Co4 clusters loaded on the Se-doped melon CN surface. After loading cobalt clusters, CO2 activation is significantly improved, with preference for the 8-electron product CH4, as the 2-electron products have higher desorption energies. Overall, this work provides a microscopic understanding of the CO2 reduction mechanism on Se-doped melon CN with cobalt as the co-catalyst.
RESUMO
Cd-doped ZrO2 catalyst has been found to have high selectivity and activity for CO2 hydrogenation to methanol. In this work, density functional theory calculations were carried out to investigate the microscopic mechanism of the reaction. The results show that Cd doping effectively promotes the generation of oxygen vacancies, which significantly activate the CO2 with stable adsorption configurations. Compared with CO2, gaseous H2 adsorption is more difficult, and it is mainly dissociated and adsorbed on the surface as [HCd-HO]* or [HZr-HO]* compact ion pairs, with [HCd-HO]* having the lower energy barrier. The reaction pathways of CO2 to methanol has been investigated, revealing the formate path as the dominated pathway via HCOO* to H2COO* and to H3CO*. The hydrogen anions, HCd* and HZr*, significantly reduce the energy barriers of the reaction.
RESUMO
The Ni-Mo catalyst has attracted significant attention due to its excellent coke-resistance in dry reforming of methane (DRM) reaction, but its detailed mechanism is still vague. Herein, Mo-doped Ni (Ni-Mox) and MoOx adsorbed Ni surfaces (MoOx@Ni) are employed to explore the DRM reaction mechanism and the effect of coke-resistance. Due to the electron donor effect of Mo, the antibonding states below the Fermi level between Ni and C increase and the adsorption of C decrease, thereby inhibiting the carbonization of Ni. On account of the strong Mo and O interaction, more O atoms gather around Mo, which inhibits the oxidation of Ni and may promote the formation of MoOx species on the Ni-Mo catalyst. The presence of Mo-O species promotes the carbon oxidation, forming a unique redox cycle (MoOx â MoOx-1) similar to the Mars-van Krevelen (MvK) mechanism, explaining the excellent anti-carbon deposition effect on the Ni-Mo catalyst.
RESUMO
First-principles calculations based on density functional theory were utilized to study the performance of Na2ZrO3 (NZO) and yttrium-doped Na2ZrO3 (Y-NZO) as cathode materials for sodium ion batteries (SIBs), including the stability of the desodiated structures, desodiation energy, redox mechanism, and the diffusion of Na. When 62.5% sodium is removed from NZO, its structure and volume change little and the layered structure is retained, whereas the structure starts to distort and shift to the ZrO3 phase with the extraction of more than 62.5% sodium. As desodiation proceeds, oxygen anions act as the only redox center for charge compensation, yielding a high initial voltage of 4.03 eV vs. Na/Na+ by PBE + U-D3 functional and 4.82 eV vs. Na/Na+ by HSE06-D3 functional. When the desodiation content is less than 31.25%, O23- is formed with an O-O distance of 2.38 Å. At the desodiation content of 31.25%, peroxide dimer O22- starts to form; at the desodiation content of 56.25%, the O-O bond distance is further shortened to 1.3 Å, corresponding to the formation of superoxide O2-. However, for Y-NZO, the redox reaction firstly involves O2-/O1-, which does not occur in NZO. Peroxides and superoxides appear when the sodium removal concentration is 59.38% and 75%, respectively. This indicates that the O-O dimers appear in Y-NZO at much deeper sodium removal. The calculations of diffusion paths and barriers of Na ions in NZO by PBE + U-D3 predict that the barrier of Na escaping from the mixed layer to the Na layer in NZO is 0.48 eV (the reverse barrier is 0.76 eV), smaller than those of other O3-type layered transition metal compounds, such as Na2IrO3 and Na2RuO3. After yttrium doping, the diffusion of Na ions becomes easier, indicating that the Y-doping improves the diffusion ability. This investigation interprets the mechanism of oxygen oxidation of NZO as a cathode for SIBs, and provides theoretical support for a better design of Na-rich layered oxide Na2MO3 (M represents the transition metal element) in the future research.
RESUMO
Electrocatalytic nitrogen reduction reaction (eNRR) is a new method for sustainable NH3 production, which has attracted much attention in recent years. However, the low Faradaic efficiency due to the competitive hydrogen evolution reaction (HER) and inert N≡N triple bond activation hinders its practical application. To find highly efficient electrocatalysts with excellent activity, stability and selectivity, we have studied a series of transition metal dimers (TM2) loaded on poly triazine imide, (PTI) a crystalline carbon nitride, by density functional theory calculations. The results show that most of the metal dimers have good stability. Finally, among 26 homonuclear diatomic catalysts, Mo2@PTI, Re2@PTI, and Pt2@PTI exhibit strong capability for suppressing HER, with a favorable limiting potential of -0.53, -0.36, and -0.63 V, respectively, and hence, can be used as efficient electrocatalysts for NRR. In this study, a homonuclear diatomic eNRR catalyst was designed and screened to provide not only a theoretical basis for the experiments but also an alternative approach for sustainable synthesis of ammonia.
RESUMO
The properties of KTiOPO4Mx (M = K, Na, and Li; x = 0.000-1.000) as an anode for potassium-ion batteries (PIBs), sodium-ion batteries (SIBs), and lithium-ion batteries (LIBs) are investigated by density functional theory calculations. Our work reveals that the electrochemical performance of KTiOPO4 as an anode for PIBs is superior to that for SIBs and LIBs, in terms of average voltage and ion diffusion kinetics. The ab initio molecular dynamics simulations indicate that the KTiOPO4Mx anode exhibits high structural stability, and alkali ion intercalation contributes to accelerating ion diffusion during the charging process. Particularly, the low activation energy of 0.406 eV of K migration on surface KTP(210), obtained by the climbing-image nudged elastic band method, suggests a high-rate capability. The systematical comparison of the performance of KTiOPO4 as an anode for PIBs, SIBs, and LIBs on the theoretical perspective clarifies that a large channel is not always promising for small radius ion intercalation and diffusion.
RESUMO
Close proximity between different catalytic sites is crucial for accelerating or even enabling many important catalytic reactions. Photooxidation and photoreduction in photocatalysis are generally separated from each other, which arises from the hole-electron separation on photocatalyst surface. Here, we show with widely studied photocatalyst Pt/[Formula: see text] as a model, that concentrating abundant oxygen vacancies only at the metal-oxide interface can locate hole-driven oxidation sites in proximity to electron-driven reduction sites for triggering unusual reactions. Solar hydrogen production from aqueous-phase alcohols, whose hydrogen yield per photon is theoretically limited below 0.5 through conventional reactions, achieves an ultrahigh hydrogen yield per photon of 1.28 through the unusual reactions. We demonstrated that such defect engineering enables hole-driven CO oxidation at the Pt-[Formula: see text] interface to occur, which opens up room-temperature alcohol decomposition on Pt nanoparticles to [Formula: see text] and adsorbed CO, accompanying with electron-driven proton reduction on Pt to [Formula: see text].
RESUMO
Covalent triazine-based frameworks (CTFs) are typically produced by the salt-melt polycondensation of aromatic nitriles in the presence of ZnCl2 . In this reaction, molten ZnCl2 salt acts as both a solvent and Lewis acid catalyst. However, when cyclotrimerization takes place at temperatures above 300 °C, undesired carbonization occurs. In this study, an ionothermal synthesis method for CTF-based photocatalysts was developed using a ternary NaCl-KCl-ZnCl2 eutectic salt (ES) mixture with a melting point of approximately 200 °C. This temperature is lower than the melting point of pure ZnCl2 (318 °C), thus providing milder salt-melt conditions. These conditions facilitated the polycondensation process, while avoiding carbonization of the polymeric backbone. The resulting CTF-ES200 exhibited enhanced optical and electronic properties, and displayed remarkable photocatalytic performance in the hydrogen evolution reaction.
RESUMO
Two new chemically stable metalloporphyrin-bridged metal-catechol frameworks, InTCP-Co and FeTCP-Co, were constructed to achieve artificial photosynthesis without additional sacrificial agents and photosensitizers. The CO2 photoreduction rate over FeTCP-Co considerably exceeds that obtained over InTCP-Co, and the incorporation of uncoordinated hydroxyl groups, associated with catechol, into the network further promotes the photocatalytic activity. The iron-oxo coordination chain assists energy band alignment and provides a redox-active site, and the uncoordinated hydroxyl group contributes to the visible-light absorptance, charge-carrier transfer, and CO2 -scaffold affinity. With a formic acid selectivity of 97.8 %, FeTCP-OH-Co affords CO2 photoconversion with a reaction rate 4.3 and 15.7 times higher than those of FeTCP- Co and InTCP-Co, respectively. These findings are also consistent with the spectroscopic study and DFT calculation.
RESUMO
Construction of local donor-acceptor architecture is one of the valid means for facilitating the intramolecular charge transfer in organic semiconductors. To further accelerate the interface charge transfer, a ternary acceptor-donor-acceptor (A1 -D-A2 ) molecular junction is established via gradient nitrogen substituting into the polymer skeleton. Accordingly, the exciton splitting and interface charge transfer could be promptly liberated because of the strong attracting ability of the two different electron acceptors. Both DFT calculations and photoluminescence spectra elucidate the swift charge transfer at the donor-acceptor interface. Consequently, the optimum polymer, N3 -CP, undergoes a remarkable photocatalytic property in terms of hydrogen production with AQY405â nm =26.6 % by the rational design of asymmetric molecular junctions on organic semiconductors.
RESUMO
Ni-rich layered oxides, like LiNi0.8Co0.1Mn0.1O2 (NCM811), have been widely investigated as cathodes due to their high energy density. However, gradual structural transformation during cycling can lead to capacity degradation and potential decay of cathode materials. Herein, we doped high-valence transition metal (TM) ions (V5+, Nb5+, and Zr4+) at the Ni site of NCM811 by first principles simulations and explored the mechanism of doping TMs in NCMs for enhancing the electrochemical performance. Analysis of the calculations shows that doping V, Nb and Zr has an efficient influence on alleviating the Ni oxidation, reducing the loss of oxygen, and facilitating Li+ migration. Moreover, V doping can further suppress the lattice distortion due to the radius of V5+ being close to the radius of Mn4+. In particular, compared with the barrier of the pristine NCM in Li divacancy, the barrier of V-doped NCM reaches the lowest. In conclusion, V is the most favorable dopant for NCM811 to improve the electrochemical properties and achieve both high capacity and cycling stability.
RESUMO
Based on first-principle calculations, we proposed a one two-dimensional (2D) blue AsP (b-AsP) monolayer as an ideal anode material for lithium/sodium-ion (Li/Na-ion) batteries for the first time. The b-AsP monolayer possesses thermal and dynamic stabilities. The system undergoes the transition from semiconductor to metal after Li/Na atoms are embedded, which ensures good electric transportation. Most remarkably, our results indicate that the b-AsP monolayer exhibits high theoretical capacities of 1011.2 mA h g-1 (for Li) and 1769.6 mA h g-1 (for Na), low average open circuit voltages of 0.17 eV for Li4AsP and 0.14 eV for Na7AsP systems and ultrafast diffusivity with the low energy barriers of 0.17/0.15 eV and 0.08/0.07 eV of the P/As sides for Li and Na, respectively. Given these exceptional properties, the synthesis of a buckled b-AsP monolayer is desired to achieve a promising electrode material for Li- and Na-ion batteries.
RESUMO
Density functional theory calculations have been performed to study the reaction mechanism of N2 thermal reduction (N2TR) over a single metal atom incorporated nitrogen-doped graphene. Our results reveal that the type of metal atoms and their coordination environments have a significant effect on the catalytic activity of N2TR. Regarding CoN4- and FeN4-embedded graphene sheets that the metal atom is fourfold coordinated, they are inactive for N2TR owing to the poor stability of the adsorbed H2 and N2 molecules. In contrast, if the monodisperse metal atom is surrounded by three N atoms, namely, CoN3/G and FeN3/G show activity toward N2TR, and catalytic conversion of N2 into ammonia is achieved through the associative mechanism rather than the dissociative mechanism. Further investigations show that the synthesis of NH3 over the two surfaces is mainly through the formation of an NHNH* intermediate; however, the detailed reaction mechanisms are sensitive to the type of metal atom introduced into N-doped graphene. Based on the calculated kinetic barriers, FeN3/G exhibits a better catalytic activity for N2TR. The superior performance of FeN3/G can be attributed to the fact that this surface prefers a high spin-polarized state during the whole process of N2TR, while the non-spin polarized state is predicted as the ground state for most of the elementary steps of N2-fixation over CoN3/G. The present study provides theoretical insights into developing graphene-based single atom catalysts with a high activity toward ammonia synthesis through N2TR.
RESUMO
Charge generation and separation are regarded as the major constraints limiting the photocatalytic activity of polymeric photocatalysts. Herein, two new linear polyarylether-based polymers (PAE-CPs) with distinct linking patterns between their donor and acceptor motifs were tailor-made to investigate the influence of different linking patterns on the charge generation and separation process. Theoretical and experimental results revealed that compared to the traditional single-stranded linker, the double-stranded linking pattern strengthens donor-acceptor interactions in PAE-CPs and generates a coplanar structure, facilitating charge generation and separation, and enabling red-shifted light absorption. With these prominent advantages, the PAE-CP interlinked with a double-stranded linker exhibits markedly enhanced photocatalytic activity compared to that of its single-strand-linked analogue. Such findings can facilitate the rational design and modification of organic semiconductors for charge-induced reactions.