RESUMO
Iridium/nickel (Ir/Ni) metallaphotoredox dual catalysis overcomes the challenging reductive elimination (RE) of Ni(II) species and has made a breakthrough progress to construct a wide range of C-X (X = C, N, S, and P) bonds. However, the corresponding reaction mechanisms are still ambiguous and controversial because the systematic research on the nature of this synergistic catalysis is not sufficient. Herein, IrIII/NiII and IrIII/Ni0 metallaphotoredox catalysis have been theoretically explored taking the aryl esterification reaction of benzoic acid and aryl bromide as an example by a combination of density functional theory (DFT), molecular dynamics, and time-dependent DFT computations. It is found that an electron-transfer mechanism is applicable to IrIII/NiII metallaphotoredox catalysis, but an energy-transfer mechanism is applicable to IrIII/Ni0 combination. The IrIII/NiII metallaphotoredox catalysis succeeds to construct a NiI-NiIII catalytic cycle to avoid the challenging RE of Ni(II) species, while the RE occurs from triplet excited-state Ni(II) species in the IrIII/Ni0 metallaphotoredox catalysis. In addition, the lower lowest unoccupied molecular orbital energy level of Ni(III) species than that of Ni(II) species accelerates RE from Ni(III) one. The triplet excited-state Ni(II) species can resemble a Ni(III) center, considering the metal-to-ligand charge transfer character to promote the RE.
Assuntos
Elétrons , Transporte de ElétronsRESUMO
Recently, non-fullerene-based organic solar cells (OSCs) have made great breakthroughs, and small structural differences can have dramatic impacts on the power conversion efficiency (PCE). We take ITIC and its isomers as examples to study their effects on the performance of OSCs. ITIC and NFBDT only differed in the side chain position, and they were used as models with the same donor molecule, PBDB-T, to investigate the main reasons for the difference in their performance in terms of theoretical methods. In this work, a detailed comparative analysis of the electronic structure, absorption spectra, open circuit voltage and interfacial parameters of the ITIC and NFBDT systems was performed mainly by combining the density functional theory/time-dependent density functional theory and molecular dynamics simulations. The results showed that the lowest excited state of the ITIC molecule possessed a larger ∆q and more hybrid FE/CT states, and PBDB-T/ITIC had more charge separation paths as well as a larger kCS and smaller kCR. The reason for the performance difference between PBDB-T/ITIC and PBDB-T/NFBDT was elucidated, suggesting that ITIC is a superior acceptor based on a slight modulation of the side chain and providing a guiding direction for the design of superior-performing small molecule acceptor materials.
RESUMO
Quantum mechanical and molecular dynamics simulations have been carried out on a series of anthracene-o-carborane derivatives (ANT-H, ANT-Ph, ANT-Me and ANT-TMS) with rare red-light emission in the solid state. The simulation of the heating process of the crystals and further comparison of the molecular structures and excited-state properties before and after heating help us to disclose the thermochromic behavior, that is, the red-shift emission is caused by elongation of the C1-C2 bond in the carborane moiety after heating. Thus, we believe that the molecular structure in the crystal is severely affected by heating. Transformation of the molecular conformation appears in the ANT-H crystal with increasing temperature. More specifically, the anthracene moiety moves from nearly parallel to the C1-C2 bond to nearly perpendicular, causing the short-wavelength emission to disappear after heating. As for the aggregation-induced emission phenomenon, the structures and photophysical properties were investigated comparatively in both the isolated and crystal states; the results suggested that the energy dissipation in crystal surroundings was greatly reduced through hindering structure relaxation from the excited to the ground state. We expect that discussion of the thermochromic behavior will provide a new analysis perspective for the molecular design of o-carborane derivatives.
RESUMO
Recent experimental work reported that visible-light photoredox catalysis coupled with primary sulfonamides and electron-deficient alkenes could efficiently construct C-C bonds at the α-position of primary amine derivatives under mild conditions. Here, a systematic study was conducted to explore the non-negligible excited-state single-electron-transfer (SET) processes and the catalytic cycle. Hydrogen atom transfer (HAT) catalysis containing different site-selective functionalization, involved as a critical process during the reaction, was computationally characterized. The superiorities of iridium-based photoredox catalysts in terms of photoabsorption properties, phosphorescence rates, and electron-transfer rates for SET processes were focused on. In addition, the function of quinuclidine in the entire photocatalytic reaction was also probed. These intrinsic properties and detailed insights into the mechanism are supposed to be helpful to the understanding of the C-C bond functionalization reaction and the future application of the iridium-based photoredox catalyst.
RESUMO
Large conductance Ca(2+)- and voltage-activated potassium (BK) channels, composed of pore-forming α subunits and auxiliary ß subunits, play important roles in diverse physiological activities. The ß1 is predominately expressed in smooth muscle cells, where it greatly enhances the Ca(2+) sensitivity of BK channels for proper regulation of smooth muscle tone. However, the structural basis underlying dynamic interaction between BK mSlo1 α and ß1 remains elusive. Using macroscopic ionic current recordings in various Ca(2+) and Mg(2+) concentrations, we identified two binding sites on the cytosolic N terminus of ß1, namely the electrostatic enhancing site (mSlo1(K392,R393)-ß1(E13,T14)), increasing the calcium sensitivity of BK channels, and the hydrophobic site (mSlo1(L906,L908)-ß1(L5,V6,M7)), passing the physical force from the Ca(2+) bowl onto the enhancing site and S6 C-linker. Dynamic binding of these sites affects the interaction between the cytosolic domain and voltage-sensing domain, leading to the reduction of Mg(2+) sensitivity. A comprehensive structural model of the BK(mSlo1 α-ß1) complex was reconstructed based on these functional studies, which provides structural and mechanistic insights for understanding BK gating.
Assuntos
Cálcio/metabolismo , Ativação do Canal Iônico , Subunidades alfa do Canal de Potássio Ativado por Cálcio de Condutância Alta/metabolismo , Magnésio/metabolismo , Potenciais de Ação , Sequência de Aminoácidos , Sítios de Ligação , Células HEK293 , Humanos , Gelo , Subunidades alfa do Canal de Potássio Ativado por Cálcio de Condutância Alta/química , Subunidades alfa do Canal de Potássio Ativado por Cálcio de Condutância Alta/genética , Simulação de Dinâmica Molecular , Dados de Sequência Molecular , Ligação Proteica , Subunidades Proteicas/química , Subunidades Proteicas/genética , Subunidades Proteicas/metabolismoRESUMO
The all-fused-ring acceptor (AFRA) is a success for nonfullerene materials and has attracted considerable attention as its high optical and chemical stability expected to reduce energy loss, and power conversion efficiency (PCE) approaching 15% in constructed all-small-molecule organic solar cells (OSCs). Herein, the intrinsic role of the structure of AFRA F13 and the reason for its high PCE were revealed by comparison with those of typical fused acceptors IDT-IC and Y6. An increased degree of conjugation in F13 leads to broader and red-shifted absorption peaks, facilitating enhancement of the short-circuit current. Multiple charge-transfer mechanisms are mainly attributed to the higher Frenkel exciton (FE) state due to the multiple transition ways for acceptors in the C1-CN:F13 system. The increased number of atoms contributing to the charge-transfer (CT) state facilitated the existence of more superior stacking patterns with easy formation of CT and FE/CT states and a high charge separation rate. It was found using the AFRA is an effective strategy to enhance end-group stacking, enhancing the borrowing of oscillator strength to promote multiple CT mechanisms in the complexes, explaining the high performance of this OSC device. This work is promising to guide designing an efficient AFRA in the future.
RESUMO
We try to determine if machine learning (ML) methods, applied to the discovery of new materials on the basis of existing data sets, have the power to predict completely new classes of compounds (extrapolating) or perform well only when interpolating between known materials. We introduce the leave-one-group-out cross-validation, in which the ML model is trained to explicitly perform extrapolations of unseen chemical families. This approach can be used across materials science and chemistry problems to improve the added value of ML predictions, instead of using extrapolative ML models that were trained with a regular cross-validation. We consider as a case study the problem of the discovery of non-fullerene acceptors because novel classes of acceptors are naturally classified into distinct chemical families. We show that conventional ML methods are not useful in practice when attempting to predict the efficiency of a completely novel class of materials. The approach proposed in this work increases the accuracy of the predictions to enable at least the categorization of materials with a performance above and below the median value.
RESUMO
We considered a database of tens of thousands of known organic semiconductors and identified those compounds with computed electronic properties (orbital energies, excited state energies, and oscillator strengths) that would make them suitable as nonfullerene electron acceptors in organic solar cells. The range of parameters for the desirable acceptors is determined from a set of experimentally characterized high-efficiency nonfullerene acceptors. This search leads to â¼30 lead compounds never considered before for organic photovoltaic applications. We then proceed to modify these compounds to bring their computed solubility in line with that of the best small-molecule nonfullerene acceptors. A further refinement of the search can be based on additional properties like the reorganization energy for chemical reduction. This simple strategy, which relies on a few easily computable parameters and can be expanded to a larger set of molecules, enables the identification of completely new chemical families to be explored experimentally.
RESUMO
In order to compare the main difference of two diimide derivatives on the modulation of electronic and optical properties of P3HT-based organic solar cell, the density functional theory and molecular dynamics simulations were implemented to achieve elementary data on geometrical structure, molecular orbital, open-circuit voltage, absorption spectra, energetic driving force, and interface parameter of P3HT/D1 and P3HT/D2 systems. According to the investigation, P3HT/D1 system not only exhibits higher open circuit voltage and enough energetic driving force than P3HT/D2 system, but also possesses low-lying LUMO +1 orbital which can favor the exciton separation efficiency. Moreover, on the basis of some typical interface models choose from MD simulation, the estimation of the interface rate manifests that the P3HT/D1 interface possesses the smaller charge recombination rates and larger charge separation rates than those of the P3HT/D2 interface. It is expect that this work can provide certain guidelines for the further develop the performance of organic solar cell. We hope this work can further study on non-fullerene acceptor materials as a certain guides.
Assuntos
Simulação de Dinâmica Molecular , Teoria da Densidade FuncionalRESUMO
A series of polymer donor materials 1-5 based on diketopyrrolopyrrole and thiophene unit which have been widely used in organic solar cells (OSCs) were investigated based on quantum chemical calculations. The effect of fluorine and cyano substitutions in polymer donor materials was focused on. Based on the investigation on electronic structures and optical properties of the reported molecules 1 and 2 and the analysis on some parameters relevant to charge dissociation ability at donor/acceptor interface constituted by 1 and 2 with PC61BM such as intermolecular charge transfer and recombination, driving force and Coulombic bound energy, we explained why fluorine substitution can improve OPV efficiency through strengthening eletron-withdrawing ability from a theoretical perspective. Then we designed cyano-substituted polymers 3-5 with the aim of obtaining better photovoltaic donor materials. The results reveal that our attempt to design donor materials which can balance large open-circuit voltage (Voc) and high short-circuit current (Jsc) in OSCs has worked out. It is worth noting that the substitutions of fluorine and cyano groups synergistically reduce energy gap and HOMO energy level of polymers 3 and 4. Moreover, 3/PC61BM and 4/PC61BM heterojunctions show over 107 and 104 times higher than 1/PC61BM on the ratios of intermolecular charge transfer and recombination rates (kinter-CT/kinter-CR). Thus, our work here may provide an efficient strategy to design promising donor materials in OPVs and we hope it could be useful in the future experimental synthesis.