Characterizing the Conformational Distribution in an Amorphous Film of an Organic Emitter and Its Application in a "Self-Doping" Organic Light-Emitting Diode.

The conformational distribution and mutual interconversion of thermally activated delayed fluorescence (TADF) emitters significantly affect the exciton utilization. However, their influence on the photophysics in amorphous film states is still not known due to the lack of a suitable quantitative analysis method. Herein, we used temperature-dependent time-resolved photoluminescence spectroscopy to quantitatively measure the relative populations of the conformations of a TADF emitter for the first time. We further propose a new concept of "self-doping" for realizing high-efficiency nondoped OLEDs. Interestingly, this "compositionally" pure film actually behaves as a film with a dopant (quasi-equatorial form) in a matrix (quasi-axial form). The concentration-induced quenching that may occur at high concentrations is thus expected to be effectively relieved. The "self-doping" OLED prepared with the newly developed TADF emitter TP2P-PXZ as a neat emitting layer realizes a high maximum external quantum efficiency of 25.4 % and neglectable efficiency roll-off.

Centimeter-Long Single-Crystalline Si Nanowires.

The elongation of free-standing one-dimensional (1D) functional nanostructures into lengths above the millimeter range has brought new practical applications as they combine the remarkable properties of nanostructured materials with macroscopic lengths. However, it remains a big challenge to prepare 1D silicon nanostructures, one of the most important 1D nanostructures, with lengths above the millimeter range. Here we report the unprecedented preparation of ultralong single-crystalline Si nanowires with length up to 2 cm, which can function as the smallest active material to facilitate the miniaturization of macroscopic devices. These ultralong Si nanowires with augmented flexibility are of emerging interest for flexible electronics. We also demonstrate the first single-nanowire-based wearable joint motion sensor with superior performance to reported systems, which just represents one example of novel devices that can be built from these nanowires. The preparation of ultralong Si nanowires will stimulate the fabrication and miniaturization of electric, optical, medical, and mechanical devices to impact the semiconductor industry and our daily life in the near future.

Intermolecular Charge-Transfer Transition Emitter Showing Thermally Activated Delayed Fluorescence for Efficient Non-Doped OLEDs.

A novel molecular model of connecting electron-donating (D) and electron-withdrawing (A) moieties via a space-enough and conjugation-forbidden linkage (D-Spacer-A) is proposed to develop efficient non-doped thermally activated delayed fluorescence (TADF) emitters. 10-(4-(4-(4,6-diphenyl-1,3,5-triazin-2-yl) phenoxy) phenyl)-9,9-dimethyl-9,10-dihydroacridine (DMAC-o-TRZ) was designed and synthesized accordingly. As expected, it exhibits local excited properties in single-molecule state as D-Spacer-A molecular backbone strongly suppress the intramolecular charge-transfer (CT) transition. And intermolecular CT transition acted as the vital radiation channel for neat DMAC-o-TRZ film. As in return, the non-doped device exhibits a remarkable maximum external quantum efficiency (EQE) of 14.7 %. These results prove the feasibility of D-Spacer-A molecules to develop intermolecular CT transition TADF emitters for efficient non-doped OLEDs.

Novel bipolar host materials based on 1,3,5-triazine derivatives for highly efficient phosphorescent OLEDs with extremely low efficiency roll-off.

Recently, bipolar host materials have attracted considerable attention because they can achieve balanced charge injection/transport in phosphorescent organic light emitting diodes (PhOLEDs) and consequently obtain excellent device performance. In this work, two bipolar host materials, namely, 3-(4,6-diphenyl-1,3,5-triazin-2-yl)-9-phenyl-9H-carbazole (DPTPCz) and 3-(4,6-diphenoxy-1,3,5-triazin-2-yl)-9-phenyl-9H-carbazole (DPOTPCz), have been designed, synthesized and characterized. With high triplet energy levels of 2.78 and 2.86 eV for DPTPCz and DPOTPCz, respectively, two compounds are considered promising bipolar host materials for PhOLEDs. Blue and green PhOLEDs based on these two new compounds show excellent performances. The phosphorescent devices based on DPTPCz exhibit maximum external quantum efficiencies of 14.4% (for blue device) and 21.2% (for green device), and maintain high efficiencies of 11.9% and 20.0% even at a high luminance of 10,000 cd m(-2).

Novel Dark Current Reduction Strategy via Deep Bulk Traps for High-Performance Solution-Processed Organic Photodetectors.

The performance improvement of the organic photodetectors (OPDs) focuses on suppressing the dark current density (Jd) to improve the specific detectivity. In this work, a dark current reduction strategy relying on constructing limited deep traps in the active layer to suppress charge injection rate was newly proposed. And an optimization method has been successfully demonstrated on the solution-processed OPDs accordingly. Compared with the Jd expressed by the OPD with the shallow trap system, the device with deep bulk traps exhibits a dramatically reduced dark current while ensuring high responsivity. At a bias of -2 V, the optimized photodiode with a Jd down to 1.4 × 10-5 mA cm-2 and a maximum responsivity of 0.42 A W-1 @620 nm was realized, leading to a maximum detectivity calculated from shot noise of 6.23 × 1012 Jones. This value is 49-fold higher than that of the original OPD with the same structure. The effects of deep traps inside the semiconductor film on injected carriers and photogenerated carriers are well explained by the relative positions of the initial hopping levels. A better understanding of charge transport regimes in OPD helps to open new approaches for constructing high-performance OPD toward practical applications.

A novel orange-red thermally activated delayed fluorescence emitter with high molecular rigidity and planarity realizing 32.5% external quantum efficiency in organic light-emitting diodes.

Simultaneous optimization of photoluminescence quantum yield (ΦPL) and horizontally oriented dipoles (Θ‖) is considerably challenging for orange and red thermally activated delayed fluorescence (TADF) emitters, due to the conflicts between enhancing molecular rigidity and improving molecular planarity. Herein, a novel orange-red TADF emitter 10-(dipyrido[3,2-a:2',3'-c]phenazin-11-yl)-10H-spiro[acridine-9,9'-fluorene] (SAF-2NP) was constructed with a donor-acceptor structure. The highly rigid donor and acceptor segments ensure the overall rigidity of the emitter. More importantly, the quasi-coplanar structure between the acceptor and the fluorene moiety in the donor unit enlarges the molecular plane without weakening rigidity. Consequently, SAF-2NP exhibited extremely high ΦPL and Θ‖ of 99% and 85%, respectively. The optimal organic light-emitting diode using SAF-2NP as the emitter and 4,4'-di(9H-carbazol-9-yl)-1,1'-biphenyl (CBP) as the host demonstrated an unparalleled external quantum efficiency of 32.5% and a power efficiency of 85.2 lm W-1 without any extra light extraction structure. This work provides a feasible strategy to establish efficient orange and red TADF emitters with both high rigidity and planarity.

Thermally activated delayed fluorescence exciplex emitters for high-performance organic light-emitting diodes.

Owing to their natural thermally activated delayed fluorescence (TADF) characteristics, the development of exciplex emitters for organic light-emitting diodes (OLEDs) has witnessed booming progress in recent years. Formed between electron-donating and electron-accepting molecules, exciplexes with intermolecular charge transfer processes have unique advantages compared with unimolecular TADF materials, offering a new way to develop high-performance TADF emitters. In this review, a comprehensive overview of TADF exciplex emitters is presented with a focus on the relationship between the constituents of exciplexes and their electroluminescence performance. We summarize and discuss the latest and most significant developments of TADF exciplex emitters. Notably, the design principles of efficient TADF exciplex emitters are systematically categorized into three systems within this review. These progressive achievements of TADF exciplex emitters point out future challenges to trigger more research endeavors in this growing field.

Single-Crystalline Silicon Frameworks: A New Platform for Transparent Flexible Optoelectronics.

Single-crystalline silicon (sc-Si) is the dominant semiconductor material for the modern electronics industry. Despite their excellent photoelectric and electronic properties, the rigidity, brittleness, and nontransparency of commonly used silicon wafers limit their application in transparent flexible optoelectronics. In this study, a new type of Si microstructure, named single-crystalline Si frameworks (sc-SiFs), is developed, through a combination of wet-etching and microfabrication technologies. The sc-SiFs are self-supported, flexible, lightweight, tailorable, and highly transparent. They can withstand a small bending radius of less than 0.5 mm and have a transparency of up to 96% in all wavelength ranges, owing to the hollowed-out framework structures. Thus, the sc-SiFs provide a new platform for high-performance transparent flexible optoelectronics. Taking transparent flexible photodetectors (TFPDs) as an example, substrate-free and self-driven TFPDs are achieved based on the sc-SiFs. The devices exhibit superior performance compared to other reported TFPDs and reveal the great potential for integrated optoelectronic applications. The development of sc-SiFs paves the way toward the fabrication of high-performance transparent flexible devices for a host of applications, including e-skins, the Internet of Things, transparent flexible displays, and artificial visual cortexes.

Using fluorene to lock electronically active moieties in thermally activated delayed fluorescence emitters for high-performance non-doped organic light-emitting diodes with suppressed roll-off.

Thermally activated delayed fluorescence (TADF) emitters with aggregation-induced emission (AIE) features are hot candidates for non-doped organic light-emitting diodes (OLEDs), as they are highly emissive in solid states upon photoexcitation. Nevertheless, not every AIE-TADF emitter in the past had guaranteed decent efficiencies in non-doped devices, indicating that the AIE character alone does not necessarily afford ideal non-doped TADF emitters. As intermolecular electron-exchange interaction that involves long-lived triplet excitons plays a dominant role in the whole quenching process of TADF, we anticipate that it is the main reason for the different electroluminescence performances of AIE-TADF emitters. Therefore, in this work, we designed two TADF emitters SPBP-DPAC and SPBP-SPAC by modifying a reported less successful emitter BP-DPAC with extra fluorenes to increase intermolecular distances and attenuate this electron-exchange interaction. With the fluorene lock as steric hindrance, SPBP-DPAC and SPBP-SPAC exhibit significantly higher exciton utilization in non-doped films due to the suppressed concentration quenching. The non-doped OLEDs based on SPBP-DPAC and SPBP-SPAC show an excellent maximum external quantum efficiency (EQE) of 22.8% and 21.3% respectively, and what's even more promising is that ignorable roll-offs at practical brightness (e.g., 1000 and 5000 cd m-2) were realized. These results reveal that locking the phenyl rings as steric hindrance can not only enhance the molecular rigidity, but also cause immediate relief of concentration quenching, and result in significant performance improvement under non-doped conditions. Our approach proposes a feasible molecular modification strategy for AIE-TADF emitters, potentially increasing their applicability in OLEDs.

Highly Efficient Thermally Activated Delayed Fluorescence Emitter Developed by Replacing Carbazole With 1,3,6,8-Tetramethyl-Carbazole.

Carbazole (Cz) is the one of the most popular electron donors to develop thermally activated delayed fluorescence (TADF) emitters, but additional groups are generally required in the molecules to enhance the steric hindrance between Cz and electron acceptor segments. To address this issue, we replaced Cz with its derivative 1,3,6,8-tetramethyl-carbazole (tMCz) to develop TADF emitters. Two novel compounds, 6-(4-(carbazol-9-yl)phenyl)-2,4-diphenylnicotinonitrile (CzPN) and 2,4-diphenyl-6-(4- (1,3,6,8-tetramethyl-carbazol-9-yl)phenyl) nicotinonitrile (tMCzPN) were designed and synthesized accordingly. With the same and simple molecular framework, tMCzPN successfully exhibits TADF behavior, while CzPN is a non-TADF fluorophor, as the additional steric hindrance of methyl groups leads to a more twisted structure of tMCzPN. In the organic light-emitting diodes (OLEDs), tMCzPN exhibits extremely high forward-viewing maximum external quantum efficiency of 26.0%, without any light out-coupling enhancement, which is significantly higher than that of 5.3% for CzPN. These results indicate that tMCzPN is an excellent TADF emitter and proves that tMCz is a more appropriate candidate than Cz to develop TADF emitters.

Development of Red Exciplex for Efficient OLEDs by Employing a Phosphor as a Component.

Exciplexes are ideal candidates as effective thermally activated delayed fluorescence (TADF) emitters. However, efficient orange and red TADF exciplexes have been reported seldomly, because their significant non-radiative (NR) decay of excited states lead to unavoidable energy loss. Herein, we propose a novel strategy to construct efficient red TADF exciplexes by introducing phosphor as one component. Due to the strong spin-orbit coupling of heavy metal (e.g., Ir, Pt, et al.) ion cores, the NR decays will be evidently decreased for both singlet and triplet excitons, reducing the undesired exciton waste. Moreover, compared with the conventional exciplexes, phosphorescence plays an important role for such novel exciplexes, further improving the exciton utilization. Based on this strategy, we fabricated a red exciplex containing 1,3,5-triazine-2,4,6-triyl)tris(benzene-3,1-diyl)tris(diphenylphosphine oxide) (PO-T2T) and tris(2-phenylpyridine) iridium(III) (Ir(ppy)3) as components and realize a red emission with a peak at 604 nm, a CIE coordinate of (0.55, 0.44), and a high maximum external quantum efficiency of 5% in organic light-emitting device. This efficiency is 2.6 times higher than that of the device based on the conventional red exciplex emitter, proving the superiority of our novel strategy to construct TADF exciplexes with phosphors.

Tricomponent Exciplex Emitter Realizing over 20% External Quantum Efficiency in Organic Light-Emitting Diode with Multiple Reverse Intersystem Crossing Channels.

With the naturally separated frontier molecular orbitals, exciplexes are capable of thermally activated delayed fluorescence emitters for organic light-emitting diodes (OLEDs). And, the current key issue for exciplex emitters is improving their exciton utilization. In this work, a strategy of building exciplex emitters with three components is proposed to realize multiple reverse intersystem crossing (RISC) channels, improving their exciton utilization by enhancing upconversion of nonradiative triplet excitons. Accordingly, a tricomponent exciplex DBT-SADF:PO-T2T:CDBP is constructed with three RISC channels respectively on DBT-SADF, DBT-SADF:PO-T2T, and CDBP:PO-T2T. Furthermore, its photoluminescence quantum yield and rate constant of the RISC process are successfully improved. In the OLED, DBT-SADF:PO-T2T:CDBP exhibits a remarkably high maximum external quantum efficiency (EQE) of 20.5%, which is the first report with an EQE over 20% for the OLEDs based on exciplex emitters to the best of our knowledge. This work not only demonstrates that introducing multiple RISC channels can effectively improve the exciton utilization of exciplex emitters, but also proves the superiority of the tricomponent exciplex strategy for further development of exciplex emitters.

Thermally Activated Delayed Fluorescence Carbonyl Derivatives for Organic Light-Emitting Diodes with Extremely Narrow Full Width at Half-Maximum.

Two novel thermally activated delayed fluorescence (TADF) emitters, 3-phenylquinolino[3,2,1- de]acridine-5,9-dione (3-PhQAD) and 7-phenylquinolino[3,2,1- de]acridine-5,9-dione (7-PhQAD), were designed and synthesized based on a rigid quinolino[3,2,1- de]acridine-5,9-dione (QAD) framework. With the effective superimposed resonance effect from electron-deficient carbonyls and electron-rich nitrogen atom, both emitters realize significant TADF characteristics with small Δ ESTs of 0.18 and 0.19 eV, respectively. And, molecular relaxations were dramatically suppressed for both emitters because of their conjugated structure. In the devices, 3-PhQAD realizes superior performance with a maximum external quantum efficiency (EQE) of 19.1% and a narrow full width at half-maximum (FWHM) of 44 nm, whereas a maximum EQE of 18.7% and an extremely narrow FWHM of 34 nm are realized for 7-PhQAD. These superior results reveal that apart from nitrogen and boron-aromatic systems, QAD framework can also act as a TADF matrix with effective resonance effect, and QAD derivatives are ideal candidates to develop TADF emitters with narrow FWHMs for practical applications.

Red Organic Light-Emitting Diode with External Quantum Efficiency beyond 20% Based on a Novel Thermally Activated Delayed Fluorescence Emitter.

A novel thermally activated delayed fluorescence (TADF) emitter 12,15-di(10H-phenoxazin-10-yl)dibenzo[a,c]dipyrido[3,2-h:2',3'-j]phenazine (DPXZ-BPPZ) is developed for a highly efficient red organic light-emitting diode (OLED). With rigid and planar constituent groups and evident steric hindrance between electron-donor (D) and electron-acceptor (A) segments, DPXZ-BPPZ realizes extremely high rigidity to suppress the internal conversion process. Meanwhile, the highly twisted structure between D and A segments will also lead to an extremely small singlet-triplet energy split to DPXZ-BPPZ. Therefore, DPXZ-BPPZ successfully realizes an efficient fluorescent radiation transition and reverse intersystem crossing process, and possesses an extremely high photoluminescence quantum efficiency of 97.1 ± 1.1% under oxygen-free conditions. The OLED based on DPXZ-BPPZ shows red emission with a peak at 612 nm and a Commission Internationale de L'Eclairage (CIE) coordinate of (0.60, 0.40), and it achieves high maximum forward-viewing efficiencies of 20.1 ± 0.2% (external quantum efficiency), 30.2 ± 0.6 cd A-1 (current efficiency), and 30.9 ± 1.3 lm W-1 (power efficiency). The prepared OLED has the best performance among the reported red TADF OLEDs. These results prove that DPXZ-BPPZ is an ideal candidate for red TADF emitters, and the designing approach is valuable for highly efficient red TADF emitters.

Control of Dual Conformations: Developing Thermally Activated Delayed Fluorescence Emitters for Highly Efficient Single-Emitter White Organic Light-Emitting Diodes.

In this work, we propose a novel concept to develop two fluorophores 2-(10 H-phenothiazin-10-yl)thianthrene 5,5,10,10-tetraoxide (PTZ-TTR) and 2-(4-(10 H-phenothiazin-10-yl)phenyl)thianthrene 5,5,10,10-tetraoxide (PTZ-Ph-TTR) showing dual conformations for highly efficient single-emitter white organic light-emitting diodes (WOLEDs). Both molecules exist in two stable conformations. Their nearly orthogonal forms own lower energy levels and show thermally activated delayed fluorescence (TADF) characteristics, whereas their nearly planar conformers possess higher energy levels and show only prompt fluorescence. These dual conformers were exploited for fabricating WOLEDs with complementary emission colors contributed by the two conformations. Moreover, the originally wasted triplet energy on the nearly planar conformation can be transferred to the nearly orthogonal one and then harvested via the TADF channel, realizing full exciton utilization. A PTZ-TTR-based single-emitter device exhibits standard white emission with a CIE coordinate of (0.33, 0.33) and a high color rendering index value of 92. On the other hand, the PTZ-Ph-TTR-based single-emitter device realizes an emission approaching warm white light and a high maximum external quantum efficiency of 16.34%. These results demonstrate an alternative approach for designing high-performance WOLEDs based on single TADF emitters.

Ternary Organic Solar Cells with Coumarin7 as the Donor Exhibiting Greater Than 10% Power Conversion Efficiency and a High Fill Factor of 75.

Ternary bulk heterojunction (BHJ) is a brilliant photovoltaic technology for improving the performance of organic solar cells (OSCs), because the light absorption range can be significantly extended by using multiple donors or acceptor materials. In this paper, coumarin7 (C7), a small organic molecule typical led used in organic light-emitting diodes, was initially exploited as second electron-donor component in ternary bulk heterojunction OSCs along with conventional blend system spolythieno[3,4-b]-thiophene/benzodithiophene(PTB7) and [6,6]-phenyl-C71 -butyric acid methyl(PC71 BM). A champion PCE value of 10.28% was realized in the ternary OSCs when incorporated with 10 wt % C7 doping ratio in the donors, corresponding to about 35% enhancement compared with the PTB7:PC71BM-based OSCs, a high fill factor (FF) of 75.03%, a short-circuit currentdensity (Jsc) of 18.72 mA cm-2 and an open-circuit voltage (Voc) of 0.73 V. The enhanced performance of the ternary OSCs can be attributed to the simultaneous improvement of the FF and the Jsc. In addition to extended light absorption, a perfect nanofiber filament active layer morphology is obtained due to the good compatibility between C7 and PTB7, which facilitates the balance of charge transportation and the suppression of charge recombination. This investigation suggests that coumarin derivatives, which have completely different structure with polymer donors, can also be used to fabricate ternary solar cells and have the potential applications to obtain amazing performance after further device engineering and optimization.

Avoiding Energy Loss on TADF Emitters: Controlling the Dual Conformations of D-A Structure Molecules Based on the Pseudoplanar Segments.

The recent introduction of thermally activated delayed fluorescence (TADF) emitters is regarded as an important breakthrough for the development of high efficiency organic light-emitting devices (OLEDs). The planar D and A groups are generally used to construct TADF emitters for their rigid structure and large steric hindrance. In this work, it is shown that many frequently used nonaromatic (noncontinuous conjugation or without satisfying Hückel's rule) planar segments, such as 9,9-dimethyl-9,10-dihydroacridine, are actually pseudoplanar segments and have two possible conformations-a planar form and a crooked form. Molecules constructed from pseudoplanar segments can thus have two corresponding conformations. Their existence can have significant impact on the performance of many TADF emitters. Two design strategies are presented for addressing the problem by either (1) increasing the rigidity of these groups to suppress its crooked form or (2) increasing the steric hindrance of the linked group to minimize energy of the emitters with the highly twisted form. Following these strategies, two new emitters are synthesized accordingly and successfully applied in OLEDs demonstrating high external quantum efficiencies (20.2% and 18.3%).

Coumarin-Based Thermally Activated Delayed Fluorescence Emitters with High External Quantum Efficiency and Low Efficiency Roll-off in the Devices.

Thermally activated delayed fluorescence (TADF) emitters have attracted much interest for their great applications in organic light-emitting diodes (OLEDs), but the TADF OLEDs are limited by large efficiency roll-offs. In this study, we report two coumarin-based TADF emitters, 3-methyl-6-(10H-phenoxazin-10-yl)-1H-isochromen-1-one (PHzMCO) and 9-(10H-phenoxazin-10-yl)-6H-benzo[c]chromen-6-one (PHzBCO), with relatively high photoluminescence quantum yields (PLQYs) and extremely small singlet-triplet splittings. OLEDs using these two TADF compounds as the emitters respectively demonstrate high external quantum efficiencies of 17.8% for PHzMCO and 19.6% for PHzBCO, which are the highest among the reported coumarin-derivative-based OLEDs. More importantly, these devices based on PHzMCO and PHzBCO remained 10.3% and 12.9% at 10000 cd m-2, respectively, showing relatively low efficiency roll-offs at high brightness. These results reveal that the TADF emitters with high PLQYs can effectively reduce the efficiency roll-off in the devices.

Isomeric Thermally Activated Delayed Fluorescence Emitters for Color Purity-Improved Emission in Organic Light-Emitting Devices.

To improve the color purity of thermally activated delayed fluorescence (TADF) emitters, two isomeric compounds, oPTC (5'-(phenoxazin-10-yl)-[1,1':3',1″-terphenyl]-2'-carbonitrile) and mPTC (2'-(phenoxazin-10-yl)-[1,1':3',1″-terphenyl]-5'-carbonitrile), were designed and synthesized with same skeleton but different molecular restrictions. Both compounds exhibit similar highest occupied molecular orbital and lowest unoccupied molecular orbital distributions and energy levels, photophysical properties in nonpolar cyclohexane solution, and high external quantum efficiencies (19.9% for oPTC and 17.4% for mPTC) in the devices. With the increased molecular space restriction induced by the additional phenyl substitutions at meta-position of the cyano group from mPTC to oPTC, much weaker positive solvatochromic effect is observed for mPTC. And the color purity of emission from mPTC (full width at half-maximum (fwhm) of 86 nm) is also improved contrasted with that of oPTC (fwhm of 97 nm) in the devices. These results prove that increased restriction of the molecular structure is a simple and effective method to improve the color purity of the TADF emitters.

High Performance All Fluorescence White Organic Light Emitting Devices with a Highly Simplified Structure Based on Thermally Activated Delayed Fluorescence Dopants and Host.

Thermally activated delayed fluorescence (TADF) emitters of different colors commonly need different hosts, which cause the complexed device structure and low efficiency of all fluorescence white organic light-emitting devices (F-WOLEDs). To solve this, novel concept of employing TADF exciplex as universal host of TADF emitters with different colors was proposed. All blue, green, and orange devices based on the TADF exciplex host show much lower turn-on voltages, and comparable and even higher efficiencies than corresponding devices based on conventional hosts. The two color F-WOLED with extremely simplified device structure was finally fabricated, achieving a white emission with the maximum current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE) respectively of 50.1 cd A-1, 63.0 lm W-1, and 19.0% in the forward-viewing direction without any light out-coupling technology, which is the best performance among reported F-WOLEDs, demonstrating the superiority of the novel concept.