Regulating surface potential maximizes voltage in all-perovskite tandems.

The open-circuit voltage (VOC) deficit in perovskite solar cells is greater in wide-bandgap (over 1.7 eV) cells than in perovskites of roughly 1.5 eV (refs. 1,2). Quasi-Fermi-level-splitting measurements show VOC-limiting recombination at the electron-transport-layer contact3-5. This, we find, stems from inhomogeneous surface potential and poor perovskite-electron transport layer energetic alignment. Common monoammonium surface treatments fail to address this; as an alternative, we introduce diammonium molecules to modify perovskite surface states and achieve a more uniform spatial distribution of surface potential. Using 1,3-propane diammonium, quasi-Fermi-level splitting increases by 90 meV, enabling 1.79 eV perovskite solar cells with a certified 1.33 V VOC and over 19% power conversion efficiency (PCE). Incorporating this layer into a monolithic all-perovskite tandem, we report a record VOC of 2.19 V (89% of the detailed balance VOC limit) and over 27% PCE (26.3% certified quasi-steady state). These tandems retained more than 86% of their initial PCE after 500 h of operation.

EMX2 inhibits clear cell renal cell carcinoma progress via modulating Akt/FOXO3a pathway.

Empty spiracles homeobox 2 (EMX2) is initially identified as a key transcription factor that plays an essential role in the regulation of neuronal development and some brain disorders. Recently, several studies emphasized that EMX2 could as a tumor suppressor, but its role in human clear cell renal cell carcinoma (ccRCC) remains unclear. In the present study, we investigated the role and underlying mechanism of EMX2 in the regulation of ccRCC progress. Our results demonstrated that EMX2 expression was markedly decreased in ccRCC tissues and cell lines, and low EMX2 expression predicted the poor prognosis of ccRCC patients. In addition, forced expression of EMX2 significantly inhibited the cell growth, migration, and invasion in vitro, as well as ccRCC tumor growth in nude mice, via, at least in part, regulating Akt/FOXO3a pathway. In detail, EMX2 could attenuate the phosphorylation levels of Akt and FOXO3a, and increase FOXO3a expression without affecting total Akt expression in vivo and in vitro. Meanwhile, shRNA-mediated knockdown of FOXO3a expression could obviously attenuate the effects of EMX2 on cell growth, migration, invasion, and tumor growth. Furthermore, EMX2 could significantly attenuate the interaction between Akt and FOXO3a. Taken together, our results demonstrated that EMX2 could inhibit ccRCC progress through, at least in part, modulating Akt/FOXO3a signaling pathway, thus representing a novel role and underlying mechanism of EMX2 in the regulation of ccRCC progress.

Self-Assembly and Regrowth of Metal Halide Perovskite Nanocrystals for Optoelectronic Applications.

ConspectusOver the past decade, the impressive development of metal halide perovskites (MHPs) has made them leading candidates for applications in photovoltaics (PVs), X-ray scintillators, and light-emitting diodes (LEDs). Constructing MHP nanocrystals (NCs) with promising optoelectronic properties using a low-cost approach is critical to realizing their commercial potential. Self-assembly and regrowth techniques provide a simple and powerful "bottom-up" platform for controlling the structure, shape, and dimensionality of MHP NCs. The soft ionic nature of MHP NCs, in conjunction with their low formation energy, rapid anion exchange, and ease of ion migration, enables the rearrangement of their overall appearance via self-assembly or regrowth. Because of their low formation energy and highly dynamic surface ligands, MHP NCs have a higher propensity to regrow than conventional hard-lattice NCs. Moreover, their self-assembly and regrowth can be achieved simultaneously. The self-assembly of NCs into close-packed, long-range-ordered mesostructures provides a platform for modulating their electronic properties (e.g., conductivity and carrier mobility). Moreover, assembled MHP NCs exhibit collective properties (e.g., superfluorescence, renormalized emission, longer phase coherence times, and long exciton diffusion lengths) that can translate into dramatic improvements in device performance. Further regrowth into fused MHP nanostructures with the removal of ligand barriers between NCs could facilitate charge carrier transport, eliminate surface point defects, and enhance stability against moisture, light, and electron-beam irradiation. However, the synthesis strategies, diversity and complexity of structures, and optoelectronic applications that emanate from the self-assembly and regrowth of MHPs have not yet received much attention. Consequently, a comprehensive understanding of the design principles of self-assembled and fused MHP nanostructures will fuel further advances in their optoelectronic applications.In this Account, we review the latest developments in the self-assembly and regrowth of MHP NCs. We begin with a survey of the mechanisms, driving forces, and techniques for controlling MHP NC self-assembly. We then explore the phase transition of fused MHP nanostructures at the atomic level, delving into the mechanisms of facet-directed connections and the kinetics of their shape-modulation behavior, which have been elucidated with the aid of high-resolution transmission electron microscopy (HRTEM) and first-principles density functional theory calculations of surface energies. We further outline the applications of assembled and fused nanostructures. Finally, we conclude with a perspective on current challenges and future directions in the field of MHP NCs.

A case-based review of dietary management of calcium oxalate stones.

PURPOSE: The purpose of this paper is to help patients with calcium oxalate stones to access prevention and treatment options with dietary management. METHODS: Typical cases in our hospital and other hospitals were selected for case review; combined with literature review through PubMed search, comprehensive analysis and suggestions were put forward. RESULTS: By retrieving the literature with sufficient evidence, selecting, and summarizing, analysis of dietary liquid, oxalate and oxalate precursors, calcium, protein, fruits and vegetables, salt, high dietary fiber, and other content with high evidence index was carried out, respectively. CONCLUSION: Through the retrospective analysis of typical cases and literature review, the importance of diet management in the prevention and treatment of calcium oxalate stones was emphasized again, and suggestions were put forward to promote the prevention and treatment of calcium oxalate stones.

Efficient Near-Infrared Electroluminescence from Lanthanide-Doped Perovskite Quantum Cutters.

Perovskite nanocrystals (PeNCs) deliver size- and composition-tunable luminescence of high efficiency and color purity in the visible range. However, attaining efficient electroluminescence (EL) in the near-infrared (NIR) region from PeNCs is challenging, limiting their potential applications. Here we demonstrate a highly efficient NIR light-emitting diode (LED) by doping ytterbium ions into a PeNCs host (Yb3+ : PeNCs), extending the EL wavelengths toward 1000 nm, which is achieved through a direct sensitization of Yb3+ ions by the PeNC host. Efficient quantum-cutting processes enable high photoluminescence quantum yields (PLQYs) of up to 126 % from the Yb3+ : PeNCs. Through halide-composition engineering and surface passivation to improve both PLQY and charge-transport balance, we demonstrate an efficient NIR LED with a peak external quantum efficiency of 7.7 % at a central wavelength of 990 nm, representing the most efficient perovskite-based LEDs with emission wavelengths beyond 850 nm.

Cryogenic Focused Ion Beam Enables Atomic-Resolution Imaging of Local Structures in Highly Sensitive Bulk Crystals and Devices.

With the development of ultralow-dose (scanning) transmission electron microscopy ((S)TEM) techniques, atomic-resolution imaging of highly sensitive nanomaterials has recently become possible. However, applying these techniques to the study of sensitive bulk materials remains challenging due to the lack of suitable specimen preparation methods. We report that cryogenic focused ion beam (cryo-FIB) can provide a solution to this challenge. We successfully extracted thin specimens from metal-organic framework (MOF) crystals and a hybrid halide perovskite single-crystal film solar cell using cryo-FIB without damaging the inherent structures. The high quality of the specimens enabled the subsequent (S)TEM and electron diffraction studies to reveal complex unknown local structures at an atomic resolution. The obtained structural information allowed us to resolve planar defects in MOF HKUST-1, three-dimensionally reconstruct a concomitant phase in MOF UiO-66, and discover a new CH3NH3PbI3 structure and locate its distribution in a single-crystal film perovskite solar cell. This proof-of-concept study demonstrates that cryo-FIB has a unique ability to handle highly sensitive materials, which can substantially expand the range of applications for electron microscopy.

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite.

The all-inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these strategies-including strain and doping-are based on organic-ligand-capped perovskites, which prevent perovskites from forming the close-packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic-ligand-exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI-exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half-lifetime of 10 h (luminance of 200 cd m-2 ) and an operating stability that is 6× higher than that of control devices.

Kidney-targeted baicalin-lysozyme conjugate ameliorates renal fibrosis in rats with diabetic nephropathy induced by streptozotocin.

BACKGROUND: Diabetic nephropathy (DN) is one of the most common and serious complications of diabetes, and is the most important cause of death for diabetic patients. Baicalin (BAI) has anti-oxidative, anti-inflammatory and anti-apoptotic activities, which play a role in attenuating insulin resistance and protecting the kidney. Moreover, cell-specific targeting of renal tubular cells is an approach to enhance drug accumulation in the kidney. METHODS: Forty-five Sprague-Dawley rats were divided into four groups. A diabetes model was created using streptozotocin (STZ) intraperitoneally injection. The four groups included: Control group (n = 10), DN (n = 15), BAI treatment (BAI; n = 10) and BAI-LZM treatment (BAI-LZM; n = 10) groups. In the current study, the renoprotection and anti-fibrotic effects of BAI-lysozyme (LZM) conjugate were further investigated in rats with DN induced by STZ compared with BAI treatment alone. RESULTS: The results suggest that BAI-LZM better ameliorates renal impairment, metabolic disorder and renal fibrosis than BAI alone in rats with DN, and the potential regulatory mechanism likely involves inhibiting inflammation via the nuclear factor-κB signaling pathway, inhibiting extracellular matrix accumulation via the transforming growth factor-ß/Smad3 pathway and regulating cell proliferation via the insulin-like growth factor (IGF)-1/IGF-1 receptor/p38 Mitogen-activated protein kinase (MAPK) pathway. BAI and the kidney-targeted BAI-LZM can utilize the body's cytoprotective pathways to reactivate autophagy (as indicated by the autophagy markers mechanistic target of rapamycin and sirtuin 1 to ameliorate DN outcomes. CONCLUSIONS: Our data support the traditional use of S. baicalensis as an important anti-DN traditional chinese medicine (TCM), and BAI, above all BAI-LZM, is a promising source for the identification of molecules with anti-DN effects.

Reversible Band Gap Narrowing of Sn-Based Hybrid Perovskite Single Crystal with Excellent Phase Stability.

An intriguing reversible band gap narrowing behavior of the lead-free hybrid perovskite single crystal DMASnI3 (DMA=CH3 NH2 CH3 + ) from yellow to black is observed without phase transformation. We discuss the transformation mechanism in detail. More interestingly, the transformed samples in black can rapidly self-heal into yellow ones when exposed to deionized water (DI water). Contrary to other hybrid perovskites, DMASnI3 crystals exhibit excellent water phase stability. For example, DMASnI3 was immersed in DI water for 16 h and no decomposition was observed. Inspired by its excellent water phase stability, we demonstrate a potential eco-friendly application of DMASnI3 in photo-catalysis for H2 evolution in DI water. We present the first H2 evolution rate of 0.64 µmol h-1 with good recycling properties for pure DMASnI3 crystals. After the narrowing process, the optical band gap of DMASnI3 can be lowered from 2.48 eV to 1.32 eV. Systematical characterizations are applied to investigate their structures and optoelectronic properties. The reversible band gap narrowing behavior and outstanding electrical properties, such as higher carrier mobility and long carrier lifetime show that DMASnI3 has a great potential for optoelectronic applications.

Phytotoxicity, Translocation, and Biotransformation of NaYF4 Upconversion Nanoparticles in a Soybean Plant.

The increasing uses of rare-earth-doped upconversion nanoparticles (UCNPs) have obviously caused many concerns about their potential toxicology on live organisms. In addition, the UCNPs can be released into the environment, then transported into edible crop plants, and finally entered into food chain. Here, the soybean is chosen as a model plant to study the subchronic phytotoxicity, translocation, and biotransformation of NaYF4 UCNPs. The incubation with UCNPs at a relative low concentration of 10 µg mL(-1) leads to growth promotion for the roots and stems, while concentration exceeding 50 µg mL(-1) brings concentration-dependent inhibition. Upconversion luminescence imaging and scanning electron microscope characterization show that the UCNPs can be absorbed by roots and parts of the adsorbed UCNPs are then transported through vessels to stems and leaves. The near-edge X-ray absorption fine structure spectra reveal that the adsorbed NaYF4 nanoparticles are relatively stable during a 10 d incubation. Energy-dispersive X-ray spectrum further indicates that a small amount of NaYF4 is dissolved/digested and can transform into Y-phosphate clusters in roots.

Multifunctional Rbx WO3 nanorods for simultaneous combined chemo-photothermal therapy and photoacoustic/CT imaging.

Light-triggered drug delivery based on near-infrared (NIR)-mediated photothermal nanocarriers has received tremendous attention for the construction of cooperative therapeutic systems in nanomedicine. Herein, a new paradigm of light-responsive drug carrier that doubles as a photothermal agent is reported based on the NIR light-absorber, Rb(x) WO3 (rubidium tungsten bronze, Rb-TB) nanorods. With doxorubicin (DOX) payload, the DOX-loaded Rb-TB composite (Rb-TB-DOX) simultaneously provides a burst-like drug release and intense heating effect upon 808-nm NIR light exposure. MTT assays show the photothermally enhanced antitumor activity of Rb-TB-DOX to the MCF-7 cancer cells. Most remarkably, Rb-TB-DOX combined with NIR irradiation also shows dramatically enhanced chemotherapeutic effect to DOX-resistant MCF-7 cells compared with free DOX, demonstrating the enhanced efficacy of combinational chemo-photothermal therapy for potentially overcoming drug resistance in cancer chemotherapy. Furthermore, in vivo study of combined chemo-photothermal therapy is also conducted and realized on pancreatic (Pance-1) tumor-bearing nude mice. Apart from its promise for cancer therapy, the as-prepared Rb-TB can also be employed as a new dual-modal contrast agent for photoacoustic tomography and (PAT) X-ray computed tomography (CT) imaging because of its high NIR optical absorption capability and strong X-ray attenuation ability, respectively. The results presented in the current study suggest promise of the multifunctional Rb(x)WO3 nanorods for applications in cancer theranostics.

Unraveling the Molecular Size Effect on Surface Engineering of Perovskite Solar Cells.

Surface engineering in perovskite solar cells, especially for the upper surface of perovskite, is widely studied. However, most of these studies have primarily focused on the interaction between additive functional groups and perovskite point defects, neglecting the influence of other parts of additive molecules. Herein, additives with -NH3 + functional group are introduced at the perovskite surface to suppress surface defects. The chain lengths of these additives vary to conduct a detailed investigation into the impact of molecular size. The results indicate that the propane-1,3-diamine dihydroiodide (PDAI2 ), which possesses the most suitable size, exhibited obvious optimization effects. Whereas the molecules, methylenediamine dihydroiodide (MDAI2 ) and pentane-1,5-diamine dihydroiodide (PentDAI2 ) with unsuitable size, lead to a deterioration in device performance. The PDAI2 -treated devices achieved a certified power conversion efficiency (PCE) of 25.81% and the unencapsulated devices retained over 80% of their initial PCE after 600 h AM1.5 illumination.

Unraveling radiation damage and healing mechanisms in halide perovskites using energy-tuned dual irradiation dosing.

Perovskite photovoltaics have been shown to recover, or heal, after radiation damage. Here, we deconvolve the effects of radiation based on different energy loss mechanisms from incident protons which induce defects or can promote efficiency recovery. We design a dual dose experiment first exposing devices to low-energy protons efficient in creating atomic displacements. Devices are then irradiated with high-energy protons that interact differently. Correlated with modeling, high-energy protons (with increased ionizing energy loss component) effectively anneal the initial radiation damage, and recover the device efficiency, thus directly detailing the different interactions of irradiation. We relate these differences to the energy loss (ionization or non-ionization) using simulation. Dual dose experiments provide insight into understanding the radiation response of perovskite solar cells and highlight that radiation-matter interactions in soft lattice materials are distinct from conventional semiconductors. These results present electronic ionization as a unique handle to remedying defects and trap states in perovskites.

A critical appraisal of urolithiasis clinical practice guidelines using the AGREE II instrument.

Background: The Appraisal of Guidelines for Research and Evaluation II (AGREE II) instrument was developed to improve the methodological quality of clinical practice guidelines (CPGs). High-quality guidelines can provide reliable recommendations for different clinical issues. Currently, there is no quality appraisal of CPGs for urolithiasis. This study evaluated the quality of evidence-based CPGs for urolithiasis and provided new insights into improving guideline quality on urolithiasis. Methods: Systematic reviews were conducted to identify urolithiasis CPGs in PubMed, electronic databases, and websites of medical associations from January 2009 to July 2022. The quality of included CPGs was evaluated by four reviewers using the AGREE II instrument. Subsequently, the scores of all domains in the AGREE II instrument were calculated. Results: A total of 19 urolithiasis CPGs were identified for review: seven from Europe, six from USA, three from international union, two from Canada, and one from Asia. The agreement among reviewers was rated good [intraclass correlation coefficient (ICC), 0.806; 95% CI: 0.779-0.831]. The domains with the highest scores were scope and purpose (69.7%, 54.2-86.1%) and clarity of presentation (76.8%, 59.7-90.3%). The domains of stakeholder involvement (44.9%, 19.4-84.7%) and applicability (48.5%, 30.2-72.9%) gained the lowest score. Only five guidelines (26.3%) were considered "strongly recommended". Conclusions: The overall quality of the eligible CPGs was relatively high; however, future work is still needed in the domains of rigor of development, editorial independence, applicability, and stakeholder involvement.

18.73% efficient and stable inverted organic photovoltaics featuring a hybrid hole-extraction layer.

Developing efficient and stable organic photovoltaics (OPVs) is crucial for the technology's commercial success. However, combining these key attributes remains challenging. Herein, we incorporate the small molecule 2-((3,6-dibromo-9H-carbazol-9-yl)ethyl)phosphonic acid (Br-2PACz) between the bulk-heterojunction (BHJ) and a 7 nm-thin layer of MoO3 in inverted OPVs, and study its effects on the cell performance. We find that the Br-2PACz/MoO3 hole-extraction layer (HEL) boosts the cell's power conversion efficiency (PCE) from 17.36% to 18.73% (uncertified), making them the most efficient inverted OPVs to date. The factors responsible for this improvement include enhanced charge transport, reduced carrier recombination, and favourable vertical phase separation of donor and acceptor components in the BHJ. The Br-2PACz/MoO3-based OPVs exhibit higher operational stability under continuous illumination and thermal annealing (80 °C). The T80 lifetime of OPVs featuring Br-2PACz/MoO3 - taken as the time over which the cell's PCE reduces to 80% of its initial value - increases compared to MoO3-only cells from 297 to 615 h upon illumination and from 731 to 1064 h upon continuous heating. Elemental analysis of the BHJs reveals the enhanced stability to originate from the partially suppressed diffusion of Mo ions into the BHJ and the favourable distribution of the donor and acceptor components induced by the Br-2PACz.

Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells.

P-i-n geometry perovskite solar cells (PSCs) offer simplified fabrication, greater amenability to charge extraction layers, and low-temperature processing over n-i-p counterparts. Self-assembled monolayers (SAMs) can enhance the performance of p-i-n PSCs but ultrathin SAMs can be thermally unstable. We report a thermally robust hole-selective layer comprised of nickel oxide (NiOx) nanoparticle film with a surface-anchored (4-(3,11-dimethoxy-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid (MeO-4PADBC) SAM that can improve and stabilize the NiOx/perovskite interface. The energetic alignment and favorable contact and binding between NiOx/MeO-4PADBC and perovskite reduced the voltage deficit of PSCs with various perovskite compositions and led to strong interface toughening effects under thermal stress. The resulting 1.53-electron-volt devices achieved 25.6% certified power conversion efficiency and maintained >90% of their initial efficiency after continuously operating at 65 degrees Celsius for 1200 hours under 1-sun illumination.

Single-Crystal Perovskite Solar Cells Exhibit Close to Half A Millimeter Electron-Diffusion Length.

Single-crystal halide perovskites exhibit photogenerated-carriers of high mobility and long lifetime, making them excellent candidates for applications demanding thick semiconductors, such as ionizing radiation detectors, nuclear batteries, and concentrated photovoltaics. However, charge collection depreciates with increasing thickness; therefore, tens to hundreds of volts of external bias is required to extract charges from a thick perovskite layer, leading to a considerable amount of dark current and fast degradation of perovskite absorbers. However, extending the carrier-diffusion length can mitigate many of the anticipated issues preventing the practical utilization of perovskites in the abovementioned applications. Here, single-crystal perovskite solar cells that are up to 400 times thicker than state-of-the-art perovskite polycrystalline films are fabricated, yet retain high charge-collection efficiency in the absence of an external bias. Cells with thicknesses of 110, 214, and 290 µm display power conversion efficiencies (PCEs) of 20.0, 18.4, and 14.7%, respectively. The remarkable persistence of high PCEs, despite the increase in thickness, is a result of a long electron-diffusion length in those cells, which was estimated, from the thickness-dependent short-circuit current, to be ≈0.45 mm under 1 sun illumination. These results pave the way for adapting perovskite devices to optoelectronic applications in which a thick active layer is essential.

Effect of the orientation of microskin on the survival rate of transplantation and improving the method.

The direction of microskin transplantation is difficult to control, and the survival rate is critically affected. In this study, we show for the first time that survival rate of transplantation was improved by changing the direction of microskin. A human split-thickness skin graft was prepared as microskin (size of 1 mm × 1 mm), and was transplanted onto a wound in nude mice. The effect of the orientation of microskin on the survival rate of transplants was observed. The collagen membrane was first attached to the epidermal surface of pig skin, which was then cut into microskin and then they were floated on physiological saline. The effect of the collagen membrane on the orientation of microskin was observed. Then the microskin of pig with an epidermal surface attached to the collagen membrane was transplanted to the wound of the pig, and the survival rate of transplants was observed. In the 2nd, 3rd and 4th week after transplantation of nude mice, the wound healing rate in group A (all of the microskin's epidermal surface was upward) was significantly higher than in other groups (P < 0.01). The floating rate and the forward floating rate in the experimental group were significantly higher than those in the control group (P < 0.01). Four weeks after microskin transplantation of pigs, the wound contraction rate in group A, compared with group B, was significantly lower, and the wound healing rate was significantly higher (P < 0.01). In microskin grafting, the direction of microskin significantly affects the survival rate of transplantation. The method of adhering the collagen membrane to the epidermal surface of microskin may ensure complete floating of microskin on the physiological saline with the epidermal surface facing up. This is a new method to improve the survival rate of microskin grafting.

Ligand assisted growth of perovskite single crystals with low defect density.

A low defect density in metal halide perovskite single crystals is critical to achieve high performance optoelectronic devices. Here we show the reduction of defect density in perovskite single crystals grown by a ligand-assisted solution process with 3-(decyldimethylammonio)-propane-sulfonate inner salt (DPSI) as an additive. DPSI ligands anchoring with lead ions on perovskite crystal surfaces not only suppress nucleation in solution, but also regulate the addition of proper ions to the growing surface, which greatly enhances the crystal quality. The grown CH3NH3PbI3 crystals show better crystallinity and a 23-fold smaller trap density of 7 × 1010 cm-3 than the optimized control crystals. The enhanced material properties result in significantly suppressed ion migration and superior X-ray detection sensitivity of CH3NH3PbI3 detectors of (2.6 ± 0.4) × 106 µC Gy-1air cm-2 for 60 kVp X-ray and the lowest detectable dose rate reaches (5.0 ± 0.7) nGy s-1, which enables reduced radiation dose to patients in medical X-ray diagnostics.