Magneto-ionic Control of Ferrimagnetic Order by Oxygen Gating.

Ferrimagnets are considered an excellent spintronic material candidate which combines ultrafast magnetic dynamics and straightforward electrical detectability. However, efficient routes toward magneto-ionic control of ferrimagnetic order remain elusive. In this study, a solid-state oxygen gating device was designed to control the magnetic properties of the ferrimagnetic CoTb alloy. Experimental results show that applying a small voltage can irreversibly tune a Tb-dominant device to a stable Co-dominant state and decrease the magnetization compensation temperature by 130 K. In addition, a reversible voltage control of the magnetization axis between out-of-plane and in-plane states is observed, which indicates that the migrated oxygen ions can bond to both Tb and Co sublattices. First-principles calculations indicate that voltage can dynamically control the flow-in and flow-out of oxygen ions that bond to the Co sublattice. Our work provides an effective means to manipulate ferrimagnetic order and contributes to the development of ultra-low-power spintronic devices.

Coexistence of Magnon-Induced and Rashba-Induced Unidirectional Magnetoresistance in Antiferromagnets.

Unidirectional magnetoresistance (UMR) has been intensively studied in ferromagnetic systems, which is mainly induced by spin-dependent and spin-flip electron scattering. Yet, UMR in antiferromagnetic (AFM) systems has not been fully understood to date. In this work, we reported UMR in a YFeO3/Pt heterostructure where YFeO3 is a typical AFM insulator. Magnetic-field dependence and temperature dependence of transport measurements indicate that magnon dynamics and interfacial Rashba splitting are two individual origins for AFM UMR, which is consistent with the UMR theory in ferromagnetic systems. We further established a comprehensive theoretical model that incorporates micromagnetic simulation, density functional theory calculation, and the tight-binding model, which explain the observed AFM UMR phenomenon well. Our work sheds light on the intrinsic transport property of the AFM system and may facilitate the development of AFM spintronic devices.

Strain sensing based on a microbottle resonator with cleaned-up spectrum.

In this Letter, a microbottle-resonator-based strain sensor with individual mode distribution and recognizable resonance spectrum was proposed and demonstrated. A cleaned-up spectrum was achieved by inscribing horizontal microgroove scars close to the bottle center. The inscribing parameters of these grooves were designed according to the field distribution of the modes, and the obtained spectrum showed excellent consistency with theoretical analysis. The shift in the resonance peak with increasing stretching force was investigated, and the corresponding strain sensitivities were 0.085 pm/µÏµ for transverse electric polarization and 0.136 pm/µÏµ for transverse magnetic polarization, which could be further increased by using materials with smaller elastic moduli.

Design and Fabrication of Full Wheatstone-Bridge-Based Angular GMR Sensors.

Since the discovery of the giant magnetoresistive (GMR) effect, GMR sensors have gained much attention in last decades due to their high sensitivity, small size, and low cost. The full Wheatstone-bridge-based GMR sensor is most useful in terms of the application point of view. However, its manufacturing process is usually complex. In this paper, we present an efficient and concise approach to fabricate a full Wheatstone-bridge-based angular GMR sensor by depositing one GMR film stack, utilizing simple patterned processes, and a concise post-annealing procedure based on a special layout. The angular GMR sensor is of good linear performance and achieves a sensitivity of 0.112 mV/V/Oe at the annealing temperature of 260 °C in the magnetic field range from -50 to +50 Oe. This work provides a design and method for GMR-sensor manufacturing that is easy for implementation and suitable for mass production.

Effective electrical manipulation of a topological antiferromagnet by orbital torques.

The electrical control of the non-trivial topology in Weyl antiferromagnets is of great interest for the development of next-generation spintronic devices. Recent studies suggest that the spin Hall effect can switch the topological antiferromagnetic order. However, the switching efficiency remains relatively low. Here, we demonstrate the effective manipulation of antiferromagnetic order in the Weyl semimetal Mn3Sn using orbital torques originating from either metal Mn or oxide CuOx. Although Mn3Sn can convert orbital current to spin current on its own, we find that inserting a heavy metal layer, such as Pt, of appropriate thickness can effectively reduce the critical switching current density by one order of magnitude. In addition, we show that the memristor-like switching behaviour of Mn3Sn can mimic the potentiation and depression processes of a synapse with high linearity-which may be beneficial for constructing accurate artificial neural networks. Our work paves a way for manipulating the topological antiferromagnetic order and may inspire more high-performance antiferromagnetic functional devices.

Highly Energy-Efficient Spin Current Generation in SrIrO3 by Manipulating the Octahedral Rotation.

Materials with strong spin-orbit coupling (SOC) have been continuously attracting intensive attention due to their promising application in energy-efficient, high-density, and nonvolatile spintronic devices. Particularly, transition-metal perovskite oxides with strong SOC have been demonstrated to exhibit efficient charge-spin interconversion. In this study, we systematically investigated the impact of epitaxial strain on the spin-orbit torque (SOT) efficiency in the SrIrO3(SIO)/Ni81Fe19(Py) bilayer. The results reveal that the SOT efficiency is strongly related to the octahedral rotation around the in-plane axes of the single-crystal SIO. By modulating the epitaxial strain using different substrates, the SOT efficiency can be remarkably improved from 0.15 to 1.45. This 10-fold enhancement of SOT efficiency suggests that modulating the epitaxial strain is an efficient approach to control the SOT efficiency in complex oxide-based heterostructures. Our work may have the potential to advance the application of complex oxides in energy-efficient spintronic devices.

The Confounding Influence of Older Age in Statistical Models of Telehealth Utilization.

Older age is a potentially confounding variable in models of telehealth utilization. We compared unified and stratified logistic regression models using data from the 2021 National Health Interview Survey. A total of 27,626 patients were identified, of whom 38.9% had utilized telehealth. Unified and stratified modeling showed a number of important differences in their quantitative estimates, especially for gender, Hispanic ethnicity, heart disease, COPD, food allergies, high cholesterol, weak or failing kidneys, liver conditions, difficulty with self-care, the use of mobility equipment, health problems that limit the ability to work, problems paying bills, and filling a recent prescription. Telehealth utilization odds ratios differ meaningfully between younger and older patients in stratified modeling. Traditional statistical adjustments in logistic regression may not sufficiently account for the confounding influence of older age in models of telehealth utilization. Stratified modeling by age may be more effective in obtainina clinical inferences.

Enhancement of Out-of-Plane Spin-Orbit Torque by Interfacial Modification.

Spin-orbit torque (SOT)-induced switching of perpendicular magnetization in the absence of magnetic field is crucial for the application of SOT-based spintronic devices. Recent works have demonstrated that the low-symmetry crystal structure in CuPt/CoPt can give rise to an out-of-plane (OOP) spin torque and lead to deterministic magnetization switching without an external field. However, it is essential to improve OOP effective field for the efficient switching. In this work, the impact of interface oxidation on the generation of OOP effective field in a CuPt/ferromagnet heterostructure is systematically studied. By introducing an oxidized CuPt surface, it is found that the field-free switching performance shows remarkable improvement. OOP effective field measurement indicates that the oxidation treatment can enhance the OOP effective field by more than two times. It is also demonstrated that this oxidation-induced OOP SOT efficiency enhancement is independent of the device shapes, magnetic materials, or magnetization easy axis. This work contributes to improve the performance of SOT devices and provides an effective fabrication guidance for future spintronic devices that utilize OOP SOT.

Efficient Spin-Orbit Torque Switching in a Perpendicularly Magnetized Heusler Alloy MnPtGe Single Layer.

Electrically manipulating magnetic moments by spin-orbit torque (SOT) has great potential applications in magnetic memories and logic devices. Although there have been rich SOT studies on magnetic heterostructures, low interfacial thermal stability and high switching current density still remain an issue. Here, highly textured, polycrystalline Heusler alloy MnxPtyGe (MPG) films with various thicknesses are directly deposited onto thermally oxidized silicon wafers. The perpendicular magnetization of the MPG single layer can be reversibly switched by electrical current pulses with a magnitude as low as 4.1 × 1010Am-2, as evidenced by both the electrical transport and the magnetic optical measurements. The switching is shown to arise from inversion symmetry breaking due to the vertical composition gradient of the films after sample annealing. The SOT effective fields of the samples are analyzed systematically. It is found that the SOT efficiency increases with the film thickness, suggesting a robust bulk-like behavior in the single magnetic layer. Furthermore, a memristive characteristic has been observed due to a multidomain switching property in the single-layer MPG device. Additionally, deterministic field-free switching of magnetization is observed when the electric current flows orthogonal to the direction of the in-plane compositional gradient due to the in-plane symmetry breaking. This work proves that the MPG is a good candidate to be utilized in high-density and efficient magnetoresistive random access memory devices and other spintronic applications.

Anomalous Thermal-Assisted Spin-Orbit Torque-Induced Magnetization Switching for Energy-Efficient Logic-in-Memory.

Spin-orbit torque (SOT) is widely considered as an effective route to manipulate magnetic order in spintronic devices. The low power consumption and long endurance demands from future computer architectures urgently require a reduction of the critical SOT switching current density, jsw. However, except for searching for a SOT source with a high-spin Hall angle, few efficient mechanisms to reduce jsw have been proposed. In this work, we achieved an anomalous thermal-assisted (TA) jsw reduction in a Pt/Co/Tb heterostructure through engineering a ferrimagnetic Co/Tb interface. This jsw reduction tendency is demonstrated to be strongly dependent on the thickness of Tb, tTb. When tTb reaches an optimal point (3 nm), a 74 K temperature increase will reduce jsw by more than an order of magnitude (17 times). Comparison experiments and theoretical simulations indicate that this anomalous TA reduction behavior goes beyond the conventional SOT framework and originates from the temperature-sensitive ferrimagnetic interface. We further propose a multifunctional logic-in-memory device, where six different Boolean logic gates can be implemented, to demonstrate the application potential and energy efficiency of this TA SOT switching mechanism. Our work provides an effective alternative to reduce jsw in SOT devices and may inspire future spintronic memory, logic, and high-frequency devices.

High On/Off Ratio Spintronic Multi-Level Memory Unit for Deep Neural Network.

Spintronic devices are considered as one of the most promising technologies for non-volatile memory and computing. However, two crucial drawbacks, that is, lack of intrinsic multi-level operation and low on/off ratio, greatly hinder their further application for advanced computing concepts, such as deep neural network (DNN) accelerator. In this paper, a spintronic multi-level memory unit with high on/off ratio is proposed by integrating several series-connected magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy (PMA) and a Schottky diode in parallel. Due to the rectification effect on the PMA MTJ, an on/off ratio over 100, two orders of magnitude higher than intrinsic values, is obtained under proper proportion of alternating current and direct current. Multiple resistance states are stably achieved and can be reconfigured by spin transfer torque effect. A computing-in-memory architecture based DNN accelerator for image classification with the experimental parameters of this proposal to evidence its application potential is also evaluated. This work can satisfy the rigorous requirements of DNN for memory unit and promote the development of high-accuracy and robust artificial intelligence applications.

Field-free spin-orbit torque-induced switching of perpendicular magnetization in a ferrimagnetic layer with a vertical composition gradient.

Current-induced spin-orbit torques (SOTs) are of interest for fast and energy-efficient manipulation of magnetic order in spintronic devices. To be deterministic, however, switching of perpendicularly magnetized materials by SOT requires a mechanism for in-plane symmetry breaking. Existing methods to do so involve the application of an in-plane bias magnetic field, or incorporation of in-plane structural asymmetry in the device, both of which can be difficult to implement in practical applications. Here, we report bias-field-free SOT switching in a single perpendicular CoTb layer with an engineered vertical composition gradient. The vertical structural inversion asymmetry induces strong intrinsic SOTs and a gradient-driven Dzyaloshinskii-Moriya interaction (g-DMI), which breaks the in-plane symmetry during the switching process. Micromagnetic simulations are in agreement with experimental results, and elucidate the role of g-DMI in the deterministic switching processes. This bias-field-free switching scheme for perpendicular ferrimagnets with g-DMI provides a strategy for efficient and compact SOT device design.

Ring-shaped Racetrack memory based on spin orbit torque driven chiral domain wall motions.

Racetrack memory (RM) has sparked enormous interest thanks to its outstanding potential for low-power, high-density and high-speed data storage. However, since it requires bi-directional domain wall (DW) shifting process for outputting data, the mainstream stripe-shaped concept certainly suffers from the data overflow issue. This geometrical restriction leads to increasing complexity of peripheral circuits or programming as well as undesirable reliability issue. In this work, we propose and study ring-shaped RM, which is based on an alternative mechanism, spin orbit torque (SOT) driven chiral DW motions. Micromagnetic simulations have been carried out to validate its functionality and exhibit its performance advantages. The current flowing through the heavy metal instead of ferromagnetic layer realizes the "end to end" circulation of storage data, which remains all the data in the device even if they are shifted. It blazes a promising path for application of RM in practical memory and logic.