RESUMO
The utilization of carbon framework to guide the growth of the Li dendrites is an important theme for Li metal batteries. The conductivity and electronegative sites of carbon materials will greatly affect the nucleation of Li metal. However, how much these two contributing factors affect the Li plating/stripping stability should be considered. This work presents N, O doped carbon nanofiber framework (CNF) membrane as the interlayer for protecting the Li anode. The amounts of N and O elements and their ratios, the conductivity, the thickness of CNF membrane and their effects on the Li plating/stripping process have been fully analyzed. The voltage profile and the stability of Li plating/stripping process are evaluated by symmetric and asymmetrical coin cells. The lithiophilic heteroatom doped surface mainly works as an excellent guide during the Li plating process, whereas the conductivity and mechanical stability of CNF equalize the current density and confine the volume change in during cycling. With the optimized CNF membrane as the interlayer, both Li metal and Li-S full cells exhibit good capacity properties and cyclic stability.
RESUMO
To improve the photocathodic protection performance of traditional TiO2photoanodes for metals, constructing a Z-scheme heterojunction is one of the most promising and creative strategies. Herein, we fabricated a novel Z-scheme MgIn2S4nanosheets/TiO2nanotube nanocomposite through anodization and hydrothermal method. The optimized Z-scheme MgIn2S4/TiO2nanocomposites exhibited stronger visible light absorption, higher separation efficiency of photoelectrons and photocathodic protection performances in comparison to pure TiO2. The theoretical analysis and experimental results show that the Z-scheme heterojunction and oxygen vacancies jointly improved the separation efficiency of photogenerated electron-hole pairs and visible light absorption capacity, thereby improving the photoelectric conversion performance of the MgIn2S4/TiO2nanocomposites. Furthermore, the influence of the precursor solution concentration on the photocathodic protection performances of the composites was investigated. As a result, when the concentration of magnesium source in the precursor solution was 0.06 mmol, the prepared MgIn2S4/TiO2-0.06 displayed the best photocathodic protection performance. In addition, the hydroxyl radicals (·OH) generated in the electron spin resonance (ESR) experiment verified the Z-scheme heterojunction mechanism of the MgIn2S4/TiO2composite, and also demonstrated the excellent redox performance of the composite. This work provides valuable reference for the construction of high-performance Z-scheme heterojunctions for photocathode protection of metals.
RESUMO
Designing heterojunction photocatalysts with matched band structure and good interface contact is an effective method to improve the photoelectrochemical activity. Herein, novel CaIn2S4/TiO2nanotube arrays (NTAs) heterojunction photoanodes were successfully prepared by electrochemical anodization and hydrothermal method. The microstructures, compositions, crystal structures, chemical valence states and light absorption performances of the composites were evaluated by field emission scanning electron microscopy, energy dispersive x-ray spectroscopy transmission electron microscope, high-resolution transmission electron microscope, x-ray diffractometer, x-ray photoelectron spectroscopy and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), respectively. The photocathodic protection performances of CaIn2S4/TiO2composites for 316 stainless steel (SS) and the influences of the CaIn2S4content on the performances were studied. The microstructural examination revealed the uniform doping of CaIn2S4nanofragments on the TiO2NTAs, and the composite was made up cubic CaIn2S4and anatase TiO2. The photogenerated electrons were transferred from the TiO2to CaIn2S4at the interface of the composite. Compared with pure TiO2NTAs, CaIn2S4/TiO2NTAs exhibited better photocathodic protection performance for 316 SS under visible light. Potential drop reached 0.78 V versus saturated calomel electrode for the 316 SS coupled with CaIn2S4/TiO2NTAs. The photocurrent density of the 316 SS coupled with the composite photoanode (235.4µA cm-2) was 17.4 times that of TiO2. The improved photocathodic protection property of CaIn2S4/TiO2NTAs was ascribed to the enhanced separation efficiency of the photogenerated carriers and the strong visible light absorption of the material. The CaIn2S4/TiO2NTAs exhibited continuous protection of the 316 SS for more than 12 h even in the dark. Therefore, the CaIn2S4/TiO2NTAs heterojunction composite is an outstanding and efficient photoanode for the photocathodic protection of metals.
RESUMO
2D layered metal hydroxides (LMH) are promising materials for electrochemical energy conversion and storage. Compared with exfoliation of bulk layered materials, wet chemistry synthesis of 2D LMH materials under mild conditions still remains a big challenge. Here, an "MgO-mediated strategy" for mass production of various 2D LMH nanosheets is presented by hydrolyzing MgO in metal salt aqueous solutions at room temperature. Benefiting from this economical and scalable strategy, ultrathin LMH nanosheets (M = Ni, Fe, Co, NiFe, and NiCo) and their derivatives (e.g., metal oxides and sulfides) can be synthesized in high yields. More importantly, this strategy opens up opportunities to fabricate hierarchically structured LMH nanosheets, resulting in high-performance electrocatalysts for the oxygen- and hydrogen-evolution reactions to realize stable overall water splitting with a low cell voltage of 1.55 V at 10 mA cm-2 . This work provides a powerful platform for the synthesis and applications of 2D materials.
RESUMO
Morphological defects were generated in an undoped 3D graphene structure via the involvement of a ZnO and Mg(OH)2 intermediate nanostructure layer placed between two layers of vapor-deposited graphene. Once the intermediate layer was etched, the 3D graphene lost support and shrank; during this process many morphological defects were formed. The electrochemical performance of the derived defective graphene utilized as the anode of a lithium (Li)-ion battery was significantly improved from â¼382 mAh g-1 to â¼2204 mAh g-1 at 0.5 A g-1 compared to normal 3D graphene. The derived defective graphene exhibited an initial capacity of 1009 mAh g-1 and retention of 83% at 4 A g-1 for 500 cycles, and â¼330 mAh g-1 at a high rate of 20 A g-1. Complicated defects such as wrinkles, pores, and particles formed during the etching of the intermediate layer, were considered to contribute to the improvement of the electrochemical performance.
RESUMO
High-safety and high-energy-density solid-state lithium metal batteries (SSLMBs) attract tremendous interest in both academia and industry. Especially, composite polymer electrolytes (CPEs) can overcome the limitations of single-component solid-state electrolytes. In this work, a strategy of combining a rigid functional skeleton with a soft polymer electrolyte to prepare reinforced CPEs was adopted. The in situ grown zeolitic imidazolate frameworks (ZIFs) with three-dimensional cellulose fiber skeleton (ZIF-67@CF) and succinonitrile (SN) plasticizer into poly(ethylene oxide) (PEO) together form ZIF-67@CF/PEO-SN CPEs. The addition of ZIF-67@CF and SN to PEO synergistically enhanced the physical and electrochemical properties of CPEs. Furthermore, the conduction mechanism of lithium-ion (Li+) in CPEs was studied using density functional theory. It is impressive that the ZIF-67@CF/PEO-SN CPEs at 30 °C exhibit a high ionic conductivity of 1.17 × 10-4 S cm-1, a competitive Li+ transference number of 0.40, a wide electrochemical window of 5.0 V, a notable tensile strength of 18.7 MPa, and superior lithium plating/stripping stability (>550 h at 0.1 mA cm2). Such favorable features endowed LiFePO4/(ZIF-67@CF/PEO-SN)/Li cell at 30 °C with a high discharging capacity (152.5 mA h g-1 at 0.2 C), a long cycling lifespan (>150 cycles with 99% capacity retention), and superior operating safety. This work provides insights and promotes the application of functionalized CPEs for SSLMBs.
RESUMO
Fe-based LDHs have been proven to be an excellent class of catalysts for the oxygen evolution reaction (OER). To achieve industrial applications of water splitting, it is critical to develop a cost-effective and simple strategy to achieve large-area catalytic electrodes. Herein, we present a moderate in situ method for growing Fe-based layered double hydroxide nanosheets on a Ni foam (LDH@NF) substrate at room temperature. Through systematic experimental design characterization, it is found that this in situ growth process is mainly driven by moderate oxidation of Fe2+ in an O2-dissolved solution, the consequent local alkaline environment, and abundant TM2+ ions (Ni2+, Co2+, Ni2+/Co2+). Compared with other in situ methods, this method is not accompanied by violent redox reactions and is favorable for the uniform growth of LDHs, and the composition of the catalyst can be easily regulated. Specifically, the optimized NiFe-LDH@NF catalyst demonstrates excellent catalytic performance in the alkaline water oxidation reaction with a low overpotential of 206/239 mV at a current density of 10/100 mA cm-2, respectively.
RESUMO
Tin dioxide (SnO2) with a high theoretical capacity of 1494 mA h g-1 has great potential to break through the capacity limitation of the conventional graphite anode (372 mA h g-1) in lithium-ion batteries. However, its practical application still faces several obstacles such as high volumetric expansion and poor electrical conductivity. To solve these problems, innovative design and synthesis of SnO2-based nanocomposite structures are necessary. Herein, we demonstrate an integrated design of a hierarchical pitaya-like P-SnO2/C@NC core-shell nanostructure which includes the core of SnO2 nanoparticles (â¼4-12 nm) uniformly embedded in the porous carbon sphere and the shell of a continuous nitrogen-doped carbon (NC) layer. Specifically, during repetitive lithiation and delithiation processes, the ultrasmall SnO2 nanoparticles reduce the internal stress greatly, the porous carbon matrix provides buffer space for a large volume change, and the N-doped carbon shell further guarantees the whole structure unit sufficient electrical conductivity and structural stability. Consequently, the resultant battery exhibits a reversible capacity of 936.8 mA h g-1 after 100 cycles at 100 mA g-1 and even an average capacity of 460.0 mA h g-1 at a high current density of 3.2 A g-1. The excellent electrochemical performance of pitaya-like SnO2/C@NC proves the efficacy of this structure design and thus provides significant reference for the construction of other electrode materials in rechargeable alkali metal ion batteries.
RESUMO
Simultaneously high-rate and high-safety lithium-ion batteries (LIBs) have long been the research focus in both academia and industry. In this study, a multifunctional composite membrane fabricated by incorporating poly(vinylidene fluoride) (PVDF) with magnesium carbonate hydroxide (MCH) nanofibers was reported for the first time. Compared to commercial polypropylene (PP) membranes and neat PVDF membranes, the composite membrane exhibits various excellent properties, including higher porosity (85.9%) and electrolyte wettability (539.8%), better ionic conductivity (1.4 mS·cm-1), and lower interfacial resistance (93.3 Ω). It can remain dimensionally stable up to 180 °C, preventing LIBs from fast internal short-circuiting at the beginning of a thermal runaway situation. When a coin cell assembled with this composite membrane was tested at a high temperature (100 °C), it showed superior charge-discharge performance across 100 cycles. Furthermore, this composite membrane demonstrated greatly improved flame retardancy compared with PP and PVDF membranes. We anticipate that this multifunctional membrane will be a promising separator candidate for next-generation LIBs and other energy storage devices, in order to meet rate and safety requirements.
RESUMO
Developing a high-efficiency hydrogen evolution reaction (HER) electrocatalyst for the large-scale production of hydrogen is essential but challenging. In this study, we used NiMo solid-solution alloy porous nanofibers to develop a robust HER electrocatalyst through electrospinning, oxidization, and high-temperature reduction treatment. In 1 M KOH electrolyte, the fabricated NiMo solid-solution alloy porous nanofibers exhibited higher HER activity than Ni nanofibers, which required a low overpotential of 69, 208, and 300 mV at 100, 500, and 1000 mA cm-2, respectively, and had outstanding durability at 100 mA cm-2 over 60 h. We developed a promising candidate for a high-efficiency HER electrocatalyst, and our findings provided valuable information for fabricating highly robust alloy-based electrocatalysts.
RESUMO
In this work, a facile casting method was utilized to prepare "polymer-in-ceramic" microporous membranes for thermally safe battery separator applications; that is, a series of composite membranes composed of silicon dioxide (SiO2) as a matrix and polyvinylidene fluoride (PVDF) as a binder were prepared. The effects of different SiO2 contents on various physical properties of membranes such as the porosity, electrolyte absorption rate, electrochemical stability, and especially thermal stability of the SiO2/PVDF composite membranes were systematically studied. Compared with a commercial polypropylene separator, the SiO2/PVDF membrane has a higher porosity (66.0%), electrolyte absorption (239%), and ion conductivity (1.0 mS·cm-1) and superior thermal stability (only 2.1% shrinkage at 200 °C for 2 h) and flame retardancy. When the content of SiO2 in the membrane reached 60% (i.e., PS6), LiFePO4/PS6/Li half-cells exhibited excellent cycle stability (138.2 mA h·g-1 discharging capacity after 100 cycles at 1C) and Coulombic efficiency (99.1%). The above advantages coupled with the potential for rapid and large-scale production reveal that the "polymer-in-ceramic" SiO2/PVDF membrane has prospective separator applications in secondary lithium-ion batteries.
RESUMO
A novel "selective surface dissolution" (SSD) method was successfully utilized in previous research to prepare "all-polymer composites" aiming to structural applications. In the current study, this simple, cost-effective, and environmentally friendly method was employed for the first time to synthesize cellulose-derived highly porous three-dimensional (3D) activated carbon materials to assemble superior electrodes for supercapacitors. ZnCl2 aqueous solution was used to partially dissolve the surface of cellulose fibers. The partially dissolved cellulose I crystalline phase at the fiber surface can be consolidated into fibrillar cellulose polymorphs (e.g., cellulose II) which connects remaining fibers together. By a carefully controlled SSD method, a highly porous 3D cellulosic skeleton with interconnected bridge-like fibrillar linkages and hierarchical pore structures can be created. After carbonization, the 3D fiber construct with interconnected fibrillar linkages and hierarchical pore structures remains and highly porous activated carbons were obtained. The effects of various processing parameters (e.g., solvent concentration, immersion time, etc.) on the morphology of the as-formed activated porous carbons and their electrochemical performance as electrodes in supercapacitors were systematically investigated and discussed. It was concluded that the SSD method is a promising chemical approach to produce large-scale cellulose-derived activated porous carbons in an environmentally friendly manner.
RESUMO
How to exert the energy density advantage is a key link in the development of lithium-sulfur batteries. Therefore, the performance degradation of high-sulfur-loading cathodes becomes an urgent problem to be solved at present. In addition, the volumetric capacities of high-sulfur-loading cathodes are still at a low level compared with their areal capacities. Aiming at these issues, two-dimensional carbon yolk-shell nanosheet is developed herein to construct a novel self-supporting sulfur cathode. The cathode with high-sulfur loading of 5 mg cm-2 and sulfur content of 73 wt% not only delivers an excellent rate performance and cycling stability, but also provides a favorable balance between the areal (5.7 mAh cm-2) and volumetric (1330 mAh cm-3) capacities. Remarkably, an areal capacity of 11.4 mAh cm-2 can be further achieved by increasing the sulfur loading from 5 to 10 mg cm-2. This work provides a promising direction for high-energy-density lithium-sulfur batteries.One of the challenges facing lithium-sulfur batteries is to develop cathodes with high mass and high volume loading. Here the authors show that two-dimensional carbon yolk-shell nanosheets are promising sulfur host materials, enabling stable battery cells with high energy density.
RESUMO
Graphene nanoscroll (GNS) is a spirally wrapped two-dimensional (2D) graphene sheet (GS) with a 1D tubular structure resembling that of a multiwalled carbon nanotube (MWCNT). GNS provide open structure at both ends and interlayer galleries that can be easily intercalated and adjusted, which show great potential applications in energy storage. Here we demonstrate a novel and simple strategy for the large-scale preparation of GNSs wrapping Fe3O4 nanoparticles (denoted as Fe3O4@GNSs) from graphene oxide (GO) sheets by cold quenching in liquid nitrogen. When a heated aqueous mixed suspension of GO sheets and Fe3O4 nanoparticles is immersed in liquid nitrogen, the in-situ wrapping of Fe3O4 nanoparticles with GNSs is easily realized. The structural conversion is closely correlated with the initial temperature of mixed suspension, the zeta potential of Fe3O4 nanoparticles and the immersion way. Remarkably, such hybrid structure provides the right combination of electrode properties for high-performance lithium-ion batteries. Compared with other wrapping structure, such 1D wrapping structure (GNSs wrapping) effectively limits the volume expansion of Fe3O4 nanoparticles during the cycling process, consequently, a high reversible capacity, good rate capability, and excellent cyclic stability are achieved with the material as anode for lithium storage. The results presented here may pave a way for the large-scale preparation of GNS-based materials in electrochemical energy storage applications.