Unilateral high-riding vertebral artery is associated with asymmetric morphological changes of the atlantoaxial joint: a novel risk factor for atlantoaxial osteoarthritis.

PURPOSE: This study aimed to investigate the association between unilateral high-riding vertebral artery (HRVA) and morphological changes in the atlantoaxial joint (AAJ) and to determine whether unilateral HRVA is a risk factor for atlantoaxial osteoarthritis (AAOA). METHODS: We conducted a retrospective analysis of 2496 patients admitted to our medical center between January 2020 and December 2022 who underwent CT imaging of the cervical spine. Two hundred and seventy-two patients with unilateral HRVA (HRVA group) were identified and a respective 2:1 age- and sex-matched control group without HRVA was built. Morphological parameters, including C2 lateral mass settlement (C2 LMS), C1/2 coronal inclination (C1/2 CI), lateral atlanto-dental interval (LADI), and C1/2 relative rotation angle (C1/2 RRA) were measured. The degree of AAOA was recorded. Risk factors associated with AAOA were identified using univariate and multivariable logistic regression analyses. RESULTS: The study included 61.4% women, and the overall average age of the study population was 48.7 years. The morphological parameters (C2 LMS, C1/2 CI, and LADI) in AAJ were asymmetric between the HRVA and the non-HRVA sides in the HRVA group (p < 0.001). These differences in parameters (d-C2 LMS, d-C1/2 CI, and d-LADI) between the HRVA and the non-HRVA sides, and C1/2 RRA were significantly larger than those in the control group. Eighty-three of 816 patients (10.2%) with AAOA had larger values of d-C2 LMS, d-C1/2 CI, d-LADI, and C1/2 RRA compared with the patients without AAOA (p < 0.05). The multivariable logistic regression analysis indicated that unilateral HRVA [adjusted odds ratio (OR) = 2.6, 95% CI: 1.1-6.3, p = 0.029], age in the sixth decade or older (adjusted OR = 30.2, 95% CI: 16.1-56.9, p < 0.001), women (adjusted OR = 2.1, 95% CI: 1.0-5.6, P = 0.034) were independent risk factors for AAOA. CONCLUSION: Unilateral HRVA was associated with asymmetric morphological changes of nonuniform settlement of C2 lateral mass, lateral slip of atlas, and atlantoaxial rotation displacement. Besides age ≥ 60 years and females, unilateral HRVA is an independent risk factor for AAOA.

What is the difference in pedicle morphology of the fifth lumbar vertebra between isthmic and degenerative L5-S1 spondylolisthesis? An anatomic study of 328 patients via multi-slice spiral computed tomography.

PURPOSE: The purpose of this study was to investigate and determine whether there are differences in L5 pedicles morphology between isthmic and degenerative L5-S1 spondylolisthesis. METHODS: One hundred and nineteen patients with isthmic spondylolisthesis and 45 patients with degenerative spondylolisthesis at L5-S1 were enrolled in the IS group and DS group, respectively, and 164 lumbar disc herniation patients without spondylolysis or spondylolisthesis were classified into the normal (NL) group. A series of pedicle parameters of the fifth lumbar vertebra, including pedicle length (PL), pedicle width (PW), pedicle screw trajectory length (PSTL), pedicle height (PH), and the pedicle camber angle (PCA), were measured using multi-slice spiral computed tomography (MSCT). The slip distance of the L5 vertebra was measured on radiography, and the percentage of slip was also recorded. RESULTS: The pedicles of the fifth lumbar vertebra were shorter and wider, and the PCA was larger in the IS group compared to the DS group and NL group. On the contrary, the pedicles in the DS group were elongated and thinner, and the PCA was smaller. The pedicle parameters of PL were significantly positively correlated with the percentage of slip in the DS group, but PW and PCA were negatively correlated with the percentage of slip. There was no correlation between the percentage of slip and L5 pedicle parameters in the IS group. CONCLUSIONS: The L5 pedicles morphology in L5-S1 isthmic spondylolisthesis shows abduction, shortness, and width, while that in the degenerative spondylolisthesis shows adduction, lengthening, and thinning compared with the normal populations. The morphology changes may be the result of pedicle stress remodelling in the development of spondylolisthesis, which should be taken into consideration when placing at the insertion of pedicle screws.

A novel method for measurement of the occipital-cervical distance via the occiput-C4 distance.

BACKGROUND: The aim of the present study was to describe and measure the occipital-cervical distance by a novel method utilizing the occiput-C4 distance (OC4D) in normal subjects, as a proposed tool to guide restoration of vertical dislocations of the occipitocervical region in patients with basilar invaginations and for performing standardized testing of occipitocervical constructs. METHODS: We analyzed neutral, flexion, and extension lateral cervical spine radiographs of 150 asymptomatic subjects (73 males and 77 females) that were judged to be normal. The mean age of the included asymptomatic subjects was 48.0 ± 8.4 years old (range 20-69 years old; 48.4 ± 10.2 years old for males and 47.6 ± 6.4 years old for females). The OC4D was defined as the shortest distance from the center of the C4 vertebral body to the McGregor's line. Occipitocervical distances (OCDs) were measured and analyzed its correlation with OC4Ds. Two spine surgeons each performed three measurements of the OC4D and OCD from each asymptomatic subject, from which our reported average values were derived. The height, weight, and body mass index (BMI) of each subject were recorded and analyzed for their correlations with the OC4D and OCD. RESULTS: The OC4Ds from neutral, flexion, and extension lateral cervical spine radiographs were 69.0 ± 6.9, 68.9 ± 6.8, and 68.1 ± 6.9 mm, respectively. There was no significant difference in the OC4D values among neutral, flexion, and extension lateral cervical spine radiographs (P >  0.05). The neutral, flexion, and extension OCDs were 23.0 ± 4.8, 27.6 ± 6.0, and 13.8 ± 4.7 mm, respectively. In particular, the neutral OCD was significantly different from those in flexion and extension lateral cervical spine radiographs (P <  0.001). There was no significant correlation between OC4D and OCD in neutral, flexion, and extension (P >  0.05 for all). There were positive correlations between OC4D and height, as well as OC4D and weight, in neutral, flexion, and extension lateral cervical spine radiographs (P <  0.001 for all). Furthermore, the intra-class correlation coefficients for inter- and intra-observer reliabilities of OC4Ds in neutral, flexion, and extension lateral cervical spine radiographs were significantly higher than those for OCDs (P <  0.001). CONCLUSIONS: The OC4D represents a novel measurement for estimating the occipital-cervical distance that is not affected by changes in neutral, flexion, and extension positions. Hence, the OC4D may serve as a valuable parameter and intra-operative tool to guide vertical restoration during occipitocervical fusion (OCF) for patients with altered occiput-cervical anatomy.

The association between unilateral high-riding vertebral artery and atlantoaxial joint morphology: a multi-slice spiral computed tomography study of 396 patients and a finite element analysis.

BACKGROUND CONTEXT: A high-riding vertebral artery (HRVA) can deviate too medially, too posteriorly, or too superiorly to allow the safe insertion of screws. However, it is unknown whether the presence of a HRVA is associated with morphological changes of the atlantoaxial joint. PURPOSE: To investigate the association between HRVA and atlantoaxial joint morphology in patients with and without HRVA. STUDY DESIGN: A retrospective case-control study and finite element (FE) analysis. PATIENT SAMPLE: A total of 396 patients with cervical spondylosis underwent multi-slice spiral computed tomography (MSCT) of cervical spine at our institutions from 2020 to 2022. OUTCOME MEASURES: A series of atlantoaxial joint morphological parameters, including C2 lateral mass settlement (C2 LMS), C1-2 sagittal joint inclination (C1-2 SI), C1-2 coronal joint inclination (C1-2 CI), atlanto-dental interval (ADI), lateral atlanto-dental interval (LADI), and C1-2 relative rotation angle (C1-2 RRA) were measured, and lateral atlantoaxial joints osteoarthritis (LAJs-OA) was recorded. The stress distribution on the C2 facet surface under different torques of flexion-extension, lateral bending, and axial rotation was analyzed by FE models. A 2-Nm moment was applied to all models to determine the range of motion (ROM). METHODS: A total of 132 consecutive cervical spondylosis patients with unilateral HRVA were enrolled in the HRVA group, and 264 patients without HRVA matched for age and sex were enrolled in the normal (NL) group. Atlantoaxial joint morphological parameters were compared between two sides of C2 lateral mass within HRVA or NL group, and between HRVA and NL groups. A 48-year-old woman with cervical spondylosis without HRVA was selected for cervical MSCT. A three-dimensional (3D) FE intact model of the normal upper cervical spine (C0-C2) was created. We established the HRVA model by simulating atlantoaxial morphological changes of unilateral HRVA with FE method. RESULTS: The C2 LMS was significantly smaller on the HRVA side than that on the non-HRVA side in the HRVA group, but C1-2 SI, C1-2 CI, and LADI on HRVA side were significantly larger than those on non-HRVA side. There was no significant difference between left and right sides in the NL group. The difference in C2 LMS (d-C2 LMS) between HRVA side and non-HRVA side in the HRVA group was larger than that in the NL group (P < 0.05). Meanwhile, the differences in C1-2 SI (d-C1/2 SI), C1-2 CI (d-C1/2 CI), and LADI (d-LADI) in the HRVA group were significantly larger than those in the NL group. The C1-2 RRA in the HRVA group was significantly larger than that in the NL group. Pearson correlations showed that d-C1/2 SI, d-C1/2 CI, and d-LADI were positively associated with d-C2 LMS (r=0.428, 0.649, 0.498, respectively, p<.05 for all). The incidence of LAJs-OA in the HRVA group (27.3%) was significantly larger than that in the NL group (11.7%). Compared with the normal model, the ROM of C1-2 segment declined in all postures of the HRVA FE model. We found a larger distribution of stress on the C2 lateral mass surface of the HRVA side under different moment conditions. CONCLUSIONS: We suggest that HRVA affects the integrity of the C2 lateral mass. This change in patients with unilateral HRVA is associated with the nonuniform settlement of the lateral mass and an increase in the lateral mass inclination, which may further affect the degeneration of the atlantoaxial joint because of the stress concentration on the C2 lateral mass surface.

[Impact of treatment with low dose roxithromycin on stable bronchiectasis].

OBJECTIVE: To investigate the impact of treatment with low dose roxithromycin on clinical symptoms and CT scores in patients with stable bronchiectasis. METHODS: Fifty patients with bronchiectasis in stable condition were randomly assigned to a control group and a treatment group. Patients in the control group received ambroxol hydrochloride tablet 90 mg 3 times a day. Patients in the treatment group received roxithromycin disperse tablet 0.15 g every day and ambroxol hydrochloride tablet 90 mg 3 times a day. The course of treatment lasted for 6 months. Quality of life was assessed using St. George's respiratory questionnaire (SGRQ). The British Medical Research Council (MRC) dyspnea scale was used to assess the degree of dyspnea. The score for CT evaluation of the thorax, quality of life and SGRQ were performed for all patients before and after the treatment. RESULTS: After 6 months, the scores for quality of life (48 ± 13) were lower compared to that (58 ± 15) before treatment in the control group; however, the scores for bronchial wall thickening of bronchiectasis (1.8 ± 0.5) were higher than that (1.8 ± 0.4) before study. The scores for the extent of bronchiectasis (2.7 ± 1.6), the bronchial wall thickening of bronchiectasis (1.3 ± 0.4) and the global CT score (6.7 ± 2.5) were reduced after treatment as compared to those before treatment [(4.8 ± 2.3), (1.8 ± 0.5), (9.5 ± 3.3)] in the treatment group, (all P < 0.01). The degree of dyspnea (1.3 ± 0.4) and quality of life (42 ± 12) were lower than those before treatment [(1.89 ± 0.45), (56 ± 15)] in the treatment group. Furthermore, the scores for extent of bronchiectasis (2.7 ± 1.6), the scores for the bronchial wall thickening of bronchiectasis (1.3 ± 0.4) and the global CT score (6.7 ± 2.5) in the treatment group were significantly improved as compared with those [(4.8 ± 2.0), (1.8 ± 0.5), (9.7 ± 3.6)] in the control group respectively after treatment. At the same time, the degree of dyspnea (1.3 ± 0.4) in the treatment group was significantly improved as compared with that (1.7 ± 0.4) in the control group after treatment. CONCLUSIONS: The scores for the bronchial wall thickening of bronchiectasis were increased in patients with stable bronchiectasis. Low dose roxithromycin combined with ambroxol hydrochloride significantly improved degree of dyspnea, reduced scores for extent of bronchiectasis, scores for the bronchial wall thickening of bronchiectasis and the global CT score as compared to treatment with ambroxol hydrochloride alone in patients with bronchiectasis in stable condition.

Classification of unilateral cervical locked facet with or without lateral mass-facet fractures and a retrospective observational study of 55 cases.

This study describes a morphology-based unilateral cervical facet interlocking classification in an attempt to clarify the injury mechanism, instability, neurological deficits, radiological features, and determine optimum management strategies for these injuries. A total of 55 patients with unilateral cervical locked facet (UCLF) involving C3 to C7 were identified between January 1, 2012 and December 1, 2019. The injuries were classified into three types, and they were further divided into six subtypes using three-dimensional computed tomography. The injury mechanism, clinical features, neurological deficits, and imaging characteristics were analyzed, and the appropriate treatment strategies for UCLF were discussed. UCLFs were divided into the following six subtypes: UCLF without lateral mass-facet fracture (type I) in nine cases, with superior articular process fracture (type II A) in 22, with inferior articular process fracture (type II B) in seven, both superior and inferior articular process fractures (type II C) in four, with lateral mass splitting fracture (type III A) in three, and with lateral mass comminution fractures (type III B) in ten. A total of 22 (40.0%) of the 55 patients presented with radiculopathy, and 23 patients (41.8%) had spinal cord injuries. The subtype analyses showed high rates of radiculopathy in types II A (68.2%) and II C (75.0%), as well as significant spinal cord injury in types I (77.8%) and III (61.5%). Destruction of the facet capsule was observed in all patients, but the injury of disc, ligamentous complex, and vertebra had a significant difference among the types or subtypes. The instability parameters of the axial rotation angle, segmental kyphosis, and sagittal displacement showed significant differences in various types of UCLF. Closed reduction by preoperative and intraoperative general anesthesia traction was achieved in 27 patients (49.1%), and successful rate of closed reduction in type I (22.2%) was significantly lower than that in type II (51.5%) and type III (61.5%). A total of 35 of 55 patients underwent a single anterior fixation and fusion, 10 patients were treated with posterior pedicle and (or) lateral mass fixation, and combined surgery was performed in ten patients. Ten patients (18.2%) with a poor outcome were observed after first surgery. Among them, 3 patients treated with a single anterior surgery had persistent or aggravated radiculopathy and posterior approach surgery with ipsilateral facet resection, foramen enlargement, and pedicle and (or) lateral mass screw fixation was performed immediately, 5 patients treated with a short-segment posterior surgery showed mild late kyphosis deformity, and 2 patients with vertebral malalignment were encountered after anterior single-level fusion during the follow-up. This retrospective study indicated that UCLF is a rotationally unstable cervical spine injury. The classification proposed in this study will contribute to understanding the injury mechanism, radiological characteristics, and neurological deficits in various types of UCLF, which will help the surgeons to evaluate the preoperative closed reduction and guide the selection of surgical approach and fusion segment.

Is it Suitable to Fix the Occipito-C2 Angle and the Posterior Occipitocervical Angle in a Normal Range During Occipitocervical Fusion?

STUDY DESIGN: This is a retrospective study. OBJECTIVES: The objective of this study was (1) to measure the occipito-C2 angle (OC2A) and the posterior occipitocervical angle (POCA) in a normal population, and (2) to observe the effects of OC2A and POCA selection on postoperative clinical efficacy and lower cervical curvature after occipitocervical fusion (OCF) in patients with basilar invagination (BI) and atlantoaxial fracture and dislocation (AAFD). SUMMARY OF BACKGROUND DATA: OC2A has received special attention with respect to the clinical efficacy during OCF. However, none of studies have focused on the relationship between OC2A and POCA and have assessed their impact on clinical outcomes in patients with different occipiocervical diseases. MATERIALS AND METHODS: One hundred fifty healthy subjects without any cervical disease (healthy group) were randomly selected based on sex and age. Three spine surgeons measured the OC2A and POCA in the healthy group and averaged the values. Forty-two patients with BI (BI group) and 32 patients with AAFD (AAFD group) who underwent OCF between January 2012 and January 2017 were reviewed. OC2A, POCA, and cervical spinal angle (CSA) were measured preoperatively, postoperatively immediately after surgery and ambulation, and at the final follow-up visit. The preoperative and final follow-up visual analog scale (VAS), Japanese Orthopaedic Association score (JOA), neck disability index (NDI), and the change of CSA from postoperatively immediately after surgery and ambulation to the final follow-up (dCSA) were recorded. RESULTS: The values of OC2A and POCA were 14.5±3.7 and 108.2±8.1 degrees in the healthy group, respectively, and the respective 95% confidence intervals were 7.2-21.8 and 92.3-124.0 degrees as the normal range. There was a negative correlation between OC2A and POCA (r=-0.386, P<0.001). The preoperative value of OC2A (5.6±4.3 degrees) in BI group was smaller than that in the healthy group (P<0.05); however, the preoperative value of POCA (123.0±10.4 degrees) in the BI group was larger than that in the healthy group (P<0.05). There was no significantly different of OC2A and POCA between the healthy group and the AAFD group before the operation (P>0.05). The preoperative value of CSA (25.7±9.5 degrees) in the BI group was larger than that in the AAFD group (16.5±5.1 degrees) (P<0.05). In the BI group, 26 patients had ideal OC2A and POCA (both within 95% confidence interval of the healthy group) postoperatively immediately after surgery and ambulation as a subgroup of the ideal angle group. In the remaining patients with BI (nonideal angle group), VAS, JOA, and NDI at the final follow-up were significantly better than those in the ideal angle group (P<0.05). The ideal angle group showed statistically greater dCSA than the nonideal angle group of the BI group (P<0.05). On the contrary, in the AAFD group, the NDI in the ideal angle group (20 patients) was better than that in the nonideal angle group at the final follow-up, and the ideal angle group had a smaller dCSA compared with the nonideal angle group (P<0.05). CONCLUSIONS: The biomechanical balance of occipitocervical region in patients with occipitocervical diseases with different pathogenesis is different. On the basis of the different types of occipitocervical diseases, an appropriate range of OC2A and POCA should be selected by the surgeon during OCF, which can further improve the clinical efficacy and reduce the loss of the lower cervical curvature after surgery.

Importance of the Occipitoaxial Angle and Posterior Occipitocervical Angle in Occipitocervical Fusion.

OBJECTIVE: To observe the effects of occipitoaxial angle (O-C2 angle, OC2A) and posterior occipitocervical angle (POCA) selection on postoperative clinical efficacy and lower cervical curvature in patients with acute acquired atlantoaxial dislocation after occipitocervical fusion (OCF). METHODS: A total of 150 healthy subjects without cervical disease (healthy group) were randomly selected based on gender and age. Three spine surgeons measured the OC2A and POCA of the healthy group and averaged the values. A total of 30 patients with an average age of 51.0 years (range, 18-70 years; 16 male and 14 female) with trauma or rheumatoid arthritis (disease group) who underwent occipitocervical fusion (OCF) for atlantoaxial dislocation between January 2012 and June 2016 were reviewed. OC2A, POCA, and cervical spinal angle (CSA) were measured postoperative/soon after surgery and ambulation, and at the final follow-up visit. The preoperative and final follow-up visual analog scale (VAS), Japanese orthopedics association score (JOA), neck disability index (NDI), and dCSA (change of CSA from postoperative/soon after surgery and ambulation to final follow-up) were recorded. RESULTS: The values of OC2A and POCA in 150 healthy subjects were 14.5° ± 3.7° and 108.2° ± 8.1°, respectively, and the 95% confidence interval (CI) were 7.2°-21.8° and 92.3°-124.0°, respectively. There was a negative correlation between OC2A and POCA (r = -0.386, P < 0.001). There were 18 patients (group one) of ideal OC2A and POCA (both within 95% CI of the healthy group) postoperative/soon after surgery and ambulation with a mean follow-up time of 26.3 ± 20.9 months in disease group. The remaining patients (group two) with a mean follow-up time of 31.3 ± 21.3 months. There was no statistically significant difference in the baseline data as well as pre-operative outcomes, including VAS score, JOA score, and NDI between the two groups. Likewise, the post-operative outcomes in final follow-up, including VAS and JOA score, had no distinct difference in the two groups. However, NDI (11.0 ± 2.9) in group two at the final follow-up was significantly higher than that in group one (7.0 ± 2.3) (P < 0.001). And group two showed statistically greater dCSA (5.9 ± 7.5°) than group one (-2.3° ± 6.2°) (P = 0.003). CONCLUSIONS: The negative correlation between OC2A and POCA plays an important role in maintaining the biodynamic balance of the occipital-cervical region. OC2A and POCA should be controlled of a normal population in patients with acute acquired atlantoaxial dislocation during OCF, which can further improve the clinical efficacy and prevent loss of lower cervical curvature after surgery.

The use of intraoperative traction for achieving reduction of irreducible atlantoaxial dislocation caused by different craniovertebral junction pathologies.

OBJECTIVE: To investigate the usefulness of intraoperative traction in the selection of the surgical procedure for irreducible atlantoaxial dislocation (IAAD) caused by different craniovertebral junction (CVJ) pathologies. PATIENTS AND METHODS: Forty-three patients who were diagnosed with IAAD and who underwent surgery between January 2008 and May 2017 in our hospital were included in the study. All of the patients received skull traction under general anesthesia. Based on the traction results, the patients underwent one of the following surgeries: posterior fixation and fusion only, posterior atlantoaxial lateral mass joint release followed by fixation and fusion, or anterior release followed by posterior fixation and fusion. The classification system was defined accordingly. The treatment efficacy was evaluated based on the improvement of clinical symptoms and radiological findings. RESULTS: Four patients were categorized as Type A, twenty patients as Type B1, twelve patients as Type B2, and seven patients as Type C. Thirty-seven patients (86.0%) achieved complete reduction and six patients (14.0%) achieved greater than 50% reduction. Bony fusion was achieved in all patients at 6 months after the operation. The average Japanese Orthopaedic Association (JOA) score improved from 10.2 ± 2.1 before surgery to 15.0 ± 1.2 at the final follow-up. According to the Symon clinical standard, the total effectiveness rate was 97.7%, and 72.1% of the patients showed excellent clinical outcomes. CONCLUSION: Intraoperative traction is an effective and safe method to assist the selection of surgical methods for patients with IAAD caused by different CVJ etiologies.

Revision surgery after rod breakage in a patient with occipitocervical fusion: A case report.

RATIONALE: Rod breakage after occipitocervical fusion (OCF) has never been described in a patient who has undergone surgery for basilar invagination (BI) and atlantoaxial dislocation (AAD). Here, we present an unusual but significant case of revision surgery to correct this complication. PATIENT CONCERNS: A 32-year-old female presented with neck pain, unstable leg motion in walking, and also BI with AAD. Her first surgery was planned to correct these conditions and for fusion at the occipital junction (C3-4) using a screw-rod system. At the 31-month follow-up after her first operation, the patient complained of severe neck pain and limitation of motion, suggesting rod breakage. DIAGNOSES: Rod breakage after occipitocervical fusion for BI and AAD. INTERVENTIONS: The patient underwent reoperation for replacement of the broken rods, adjustment of the occipitocervical angle, maintenance of the bone graft bed, and fusion. OUTCOMES: At follow-up, the hardware was found to be in good condition, with no significant loss of cervical lordosis. At the 37-month follow-up after her second operation, the patient was doing better and continuing to recover. LESSONS: We concluded that nonideal choice of occipitocervical angle may play an important role in rod breakage; however, an inadequate bone graft and poor postoperative fusion may also contribute to implant failure.

Nocardial spinal epidural abscess with lumbar disc herniation: A case report and review of literature.

RATIONALE: Nocardial spinal epidural abscess is rare. The diagnosis is often difficult to make and, if delayed, poses a high risk of long-term disability. Nocardial spinal epidural abscess with severe lumbar disc herniation has not previously been reported. PATIENT CONCERNS: A 50-year-old man presented with progressive lumbago and leg pain for 6 weeks after receiving acupuncture therapy, and then the patient suddenly occurred urine retention after walking. DIAGNOSES: Clinical examination revealed sign of cauda equina syndrome. Magnetic resonance imaging (MRI) revealed a Lumbar(L)4 to L5 disc herniation, L3 to Sacrum(S)1 epidural abscess, and L2 to S1 paravertebral abscess. The causative organism was Nocardia farcinica. INTERVENTIONS: An urgent paravertebral abscess debridement and right L4 to L5 laminectomy were performed. Simultaneously, the disc tissue protruding into the spinal canal was removed, as well as irrigation and drainage. And antimicrobial treatment was continued for 12 months. OUTCOMES: Fortunately, the patient was able to walk with a cane and urinate autonomously without a catheter, although this remained difficult 7 days after surgery. After 1 year of treatment, the patient has recovered completely and returned to work. LESSONS: Nocardial spinal epidural abscess with severe lumbar disc herniation is extremely rare. Pain from spinal degenerative diseases often masks the early symptoms of spinal infection. It's worth noting that invasive treatment of spine is a way of causing spinal nocardial infection.