Propelling Multi-Modal Therapeutics of PEEK Implants through the Power of NO evolving Covalent Organic Frameworks (COFs).

The design and fabrication of NO-evolving core-shell nanoparticles (denoted as NC@Fe), comprised of BNN6-laden COF@Fe3 O4 nanoparticles, are reported. This innovation extends to the modification of 3D printed polyetheretherketone scaffolds with NC@Fe, establishing a pioneering approach to multi-modal bone therapy tailored to address complications such as device-associated infections and osteomyelitis. This work stands out prominently from previous research, particularly those relying on the use of antibiotics, by introducing a bone implant capable of simultaneous NO gas therapy and photothermal therapy (PPT). Under NIR laser irradiation, the Fe3 O4 NP core (photothermal conversion agent) within NC@Fe absorbs photoenergy and initiates electron transfer to the loaded NO donor (BNN6), resulting in controlled NO release. The additional heat generated through photothermal conversion further propels the NC@Fe nanoparticles, amplifying the therapeutic reach. The combined effect of NO release and PPT enhances the efficacy in eradicating bacteria over a more extensive area around the implant, presenting a distinctive solution to conventional challenges. Thorough in vitro and in vivo investigations validate the robust potential of the scaffold in infection control, osteogenesis, and angiogenesis, emphasizing the timeliness of this unique solution in managing complicated bone related infectious diseases.

Restoring the ideal Roussouly sagittal alignment in Lenke 5 adolescent idiopathic scoliosis patients: a method for decreasing the risk of proximal junctional kyphosis.

PURPOSE: Although the Roussouly classification has been widely used in surgical planning for adult scoliosis patients, little is known about whether it can be used to guide sagittal correction for adolescent idiopathic scoliosis (AIS) patients. The purpose of this study was to explore whether the Roussouly classification could be used to help surgeons restore the ideal sagittal alignment for AIS patients to avoid the development of proximal junctional kyphosis (PJK). METHODS: In this retrospective cohort study, eighty-seven patients with Lenke 5 AIS who underwent surgery from January 2010 to August 2020 were enrolled and divided into two groups: the PJK group and the non-PJK group. All patients were classified into "current types" and "ideal types" according to two versions of the Roussouly classification, and the mismatch rate was evaluated in terms of the consistency between their current type and ideal type. Student's t test, Mann‒Whitney U test, Pearson's Chi-square test, and others were used to compare the two groups regarding patient demographic characteristics (age, sex, Risser sign, etc.) and radiographic parameters (sagittal vertical axis [SVA]; thoracic kyphosis [TK]; thoracolumbar junctional kyphosis [TLK]; lumbar lordosis [LL]; pelvic incidence [PI]; pelvic tilt [PT]; sacral slope [SS]; upper instrumented vertebra [UIV]; lower instrumented vertebra [LIV]; etc.). Multivariate logistic regression with backwards stepwise selection was performed to identify the risk factors for PJK. RESULTS: PJK was observed in 16 out of 87 patients (18.4%) until the final follow-up. The incidence of PJK was significantly higher in the patients not matching their ideal type than in those who did after surgery (60.9% vs. 3.1%, p = 0.000). The patients with ideal Type 1 had the highest incidence of PJK, while the lowest incidence was observed in patients with ideal Type 2 (50.0% vs. 5.1%, p = 0.000). The PJK group had greater TK, LL, and PI-LL than the non-PJK group before and after surgery. The postoperative PJA in the PJK group was also larger than that in the non-PJK group. Multivariate logistic regression revealed that postoperative Roussouly type mismatch was significantly associated with the occurrence of PJK (OR = 64.2, CI = 9.6-407.1, p = 0.000). CONCLUSIONS: The Roussouly classification could serve as a prognostic tool for PJK in Lenke 5 AIS patients. Corrective surgery should restore sagittal alignment with respect to the patient's ideal sagittal profile (according to the Roussouly classification based on the PI) to decrease the incidence of PJK in AIS patients.

Simplified S1 vertebral bone quality (vbq) score to assess proximal junctional kyphosis after Lenke 5 adolescent idiopathic scoliosis surgery.

BACKGROUND: Proximal junctional kyphosis (PJK) is a common complication following corrective surgery for adolescent idiopathic scoliosis (AIS) with a Lenke 5 curve. Previous studies have suggested that PJK may be associated with osteopenia, which is prevalent in AIS patients. MRI-based vertebral bone quality (VBQ) scores have been proposed as a valuable tool to assess preoperative bone quality. However, accurately measuring VBQ scores in Lenke 5 AIS patients with a structural lumbar curve can be challenging. Recently, a simplified S1 VBQ score has been proposed as an alternative method when the traditional VBQ score is not applicable. This study aims to evaluate the predictive value of the simplified S1 VBQ score in predicting the occurrence of PJK after corrective surgery for Lenke 5 AIS. METHODS: We conducted a retrospective analysis of patient data to assess the predictive utility of the S1 VBQ score for PJK in Lenke 5 AIS patients. Demographic, radiographic, and surgical data were collected, and S1 VBQ scores were calculated based on preoperative T1-weighted MRI images. Univariate analysis, linear regression, and multivariate logistic regression were performed to identify potential risk factors for PJK and to assess the correlation between other variables and the S1 VBQ score. Receiver operating characteristic analysis and area under the curve values were used to evaluate the predictive efficiency of the S1 VBQ score for PJK. RESULTS: A total of 105 patients (aged 15.50 ± 2.36 years) were included in the analysis, of whom 24 (22.9%) developed PJK. S1 VBQ scores were significantly higher in the PJK group compared to the non-PJK group (2.83 ± 0.44 vs. 2.48 ± 0.30, P < 0.001), and there was a significant positive correlation between the S1 VBQ score and proximal junctional angle (PJA) (r = 0.46, P < 0.0001). Multivariate analysis revealed that the S1 VBQ scores and preoperative thoracic kyphosis (TK) were significant predictors of PJK. CONCLUSION: This study provided evidence that higher S1 VBQ scores were independently associated with PJK occurrence following corrective surgery for Lenke 5 AIS. Preoperative measurement of the S1 VBQ score on MRI may serve as a valuable tool in planning surgical correction for Lenke 5 AIS.

Preoperative geriatric nutritional risk index is useful factor for predicting postoperative delirium among elderly patients with degenerative lumbar diseases.

PURPOSE: It is the first study to evaluate the predictive value of the geriatric nutritional risk index (GNRI) on postoperative delirium (POD) after transforaminal lumber interbody fusion (TLIF) in elderly patients with degenerative lumbar diseases. METHODS: A retrospective study was conducted to assess the outcomes of TLIF surgery in elderly patients with lumbar degenerative disease between the years 2016 and 2022. Delirium was diagnosed by reviewing postoperative medical records during hospitalization, utilizing the Confusion Assessment Method. The geriatric nutritional risk index was calculated using the baseline serum albumin level and body weight. Multivariate logistic regression analysis was employed to identify the association between preoperative GNRI and postoperative delirium (POD). Additionally, a receiver operating characteristic curve was utilized to determine the optimal GNRI cutoff for predicting POD. RESULTS: POD was observed in 50 of the 324 patients. The GNRI was visibly reduced in the delirium group. The mean GNRI was 93.0 ± 9.1 in non-delirium group and 101.2 ± 8.2 in delirium group. On multivariate logistic regression, Risk of POD increases significantly with low GNRI and was an independent factor in predicting POD following TLIF (OR 0.714; 95% CI 0.540-0.944; p = 0.018). On receiver operating characteristic curve, the area under curve (AUC) for GNRI was 0.738 (95% CI 0.660-0.817). The cutoff value for GNRI according to the Youden index was 96.370 (sensitivity: 66.0%, specificity: 70.4%). CONCLUSION: Our study indicated that lower GNRI correlated significantly with POD after TLIF. Performing GNRI evaluation prior to TLIF may be an effective approach of predicting the risk for POD among elderly patients with degenerative lumbar diseases.

Hollow Cobalt Sulfide Nanospheres with Highly Enzyme-like Antibacterial Activities to Accelerate Infected Wound Healing.

The emergence of nanozymes presents a promising alternative to antibiotics for reactive oxygen species-mediated broad-spectrum antimicrobial purposes, but nanozymes still face challenges of low therapeutic efficiency and poor biocompatibility. Herein, we creatively prepared a novel kind of hollow cobalt sulfide (CoS) nanospheres with a unique mesoporous structure that is able to provide numerous active sites for enzyme-like reactions. The results revealed that 50 µg/mL of CoS nanospheres exhibited strong peroxidase- and oxidase-like activities under physiological conditions with the assistance of a low concentration of hydrogen peroxide (H2O2, 100 µM) while possessing highly efficient GSH-depletion ability, which endowed CoS nanospheres with triple enzyme-like properties to combat bacterial infections. The in vitro experiments demonstrated that the CoS nanozyme displayed significant antibacterial effects against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The in vivo implantation showed that the synthesized CoS effectively eliminated bacteria and promoted the recovery of infected wounds in rats while exhibiting a low cytotoxicity. This study provides a promising treatment strategy to accelerate infected wound healing.

Vertebral bone quality score as a novel predictor of proximal junctional kyphosis after thoracic adolescent idiopathic scoliosis surgery.

INTRODUCTION: Proximal junctional kyphosis (PJK) is one of the most common complications after thoracic AIS surgery. Previous studies reported that the etiology of PJK was associated with osteopenia and meanwhile the AIS patients were found osteopenia which could persist into adulthood. Recently, an MRI-based vertebral bone quality score (VBQ) was reported to be a promising tool which can assess preoperative bone quality. OBJECTIVE: This study aims to evaluate the utility of VBQ score in predicting PJK after corrective surgery for thoracic AIS (Lenke 1 and 2). METHODS: We conducted a retrospective study to identify the predictive efficiency of VBQ score for PJK in thoracic AIS patients. Demographic, radiographic parameters, and surgical variables were collected. VBQ score was calculated using preoperative T1-weighted MRI. Univariate analysis, linear regression, and multivariate logistic regression were performed to determine potential risk factors of PJK and correlation between other parameters and VBQ score. Receiver operating characteristic analysis and area under the curve values were utilized to evaluate the predictive efficiency of VBQ score for PJK. RESULTS: A total of 206 patients (aged 14.4 ± 2.3 years) were included, of which 33 (16.0%) developed PJK. VBQ scores were significantly different between the PJK and non-PJK groups (2.8 ± 0.2 vs 2.5 ± 0.2, P < 0.01). A significant positive correlation was found between VBQ score and PJA (R2 = 0.1728, P < 0.01).On multivariate analysis, VBQ score was the only significant predictor of PJK (odds ratio = 2.178, 95% CI = 1.644-2.885, P < 0.001), with a predictive accuracy of 83%. CONCLUSION: Higher VBQ scores were independently associated with PJK occurrence after corrective surgery for thoracic AIS. Preoperative measurement of VBQ score on MRI may serve as a valuable tool in planning thoracic AIS surgery.

MRI-based vertebral bone quality score for predicting cage subsidence by assessing bone mineral density following transforaminal lumbar interbody fusion: a retrospective analysis.

PURPOSE: This is the first study to evaluate the predictive value of the vertebral bone quality (VBQ) score on cage subsidence after transforaminal lumbar interbody fusion (TLIF) in a Chinese population using the spinal quantitative computed tomography (QCT) as the clinical standard. Meanwhile, the accuracy of the MRI-based VBQ score in bone mineral density (BMD) measurement was verified. METHODS: We performed a retrospective study of patients who underwent single-level TLIF from 2015 to 2020 with at least 1 year of follow-up. Cage subsidence was measured using postoperative radiographic images based on cage protrusion through the endplates more than 2 mm. The VBQ score was measured on T1-weighted MRI. The results were subjected to statistical analysis. RESULTS: A total of 283 patients (61.1% of female) were included in the study. The subsidence rate was with 14.1% (n = 40), and the average cage subsidence was 2.3 mm. There was a significant difference in age, sex, VBQ score and spinal QCT between the subsidence group and the no-subsidence group. The multivariable analysis demonstrated that only an increased VBQ score (OR = 2.690, 95% CI 1.312-5.515, p = 0.007) and decreased L1/2 QCT-vBMD (OR = 0.955, 95% CI 0.933-0.977, p < 0.001) were associated with an increased rate of cage subsidence. The VBQ score was found to be moderately correlated with the spinal QCT (r = -0.426, p < 0.001). The VBQ score was shown to significantly predict cage subsidence, with an accuracy of 82.5%. CONCLUSION: Our findings indicate that the MRI-based VBQ score is a significant predictor of cage subsidence and could be used to assess BMD.

Characterising salivary peptidome across diurnal dynamics and variations induced by sampling procedures.

OBJECTIVES: This study aimed to characterise diurnal dynamics of salivary peptidome and variations induced by sampling procedures. MATERIALS AND METHODS: A supervised short-term longitudinal study was conducted amongst ten healthy participants. Saliva samples were collected by different procedures (stimulated/unstimulated conditions, forepart/midstream segments) on three consecutive days. The peptidome compositions of saliva samples were analysed using matrix-assisted laser desorption/ionisation-time of flight-mass spectrometry (MALDI-TOF MS). RESULTS: The salivary peptidome exhibited a stable trend generally, even though some diurnal dynamics happened in aspects of both overall structure and certain single peptides. The results indicated saliva samples collected under unstimulated and stimulated conditions have significantly different structures of peptidome, whilst the peptidome profile of stimulated saliva was more abundant than that of unstimulated saliva. It was also indicated that the midstream segment effect might exist in the segmented process of saliva sampling. CONCLUSIONS: In summary, salivary peptidome was able to maintain stability though some dynamic changes might happen within a short-term period. Stimulated and unstimulated saliva samples had significantly different peptidome profiles, whilst the stimulated whole saliva was a larger pool of low molecular weight peptides. CLINICAL RELEVANCE: The stability of the salivary peptidome highlights the reliability of salivary peptidome as a source of diagnostic biomarker. We recommend keeping one collection condition (stimulated/unstimulated) consistently within one study on salivary peptidome. Stimulated whole saliva would be preferred if more abundant peptidome profile is needed.

Redondoviridae infection regulates circRNAome in periodontitis.

Redondoviridae is a recently identified family of DNA viruses associated with periodontitis. Circular RNAs (circRNAs) are novel endogenous, conserved noncoding RNAs contributing to the virus-related immune-inflammatory response. This study aimed to analyze the expression profiles of circRNAs in the gingival tissues of periodontitis patients with and without Redondoviridae-infection and healthy controls using high-throughput RNA sequencing combined with experimental validation. Out of 17 819 circRNAs, 175 were dysregulated. Functional annotation and enrichment analysis of the differential circRNA host genes demonstrated potential alterations in the molecular and cellular components and metabolism in individuals suffering from periodontitis with Redondoviridae infection. Moreover, "axon guidance," "lysine biosynthesis," and "vascular endothelial growth factor signaling pathways" were significantly enriched in Redondoviridae-infected gingivitis tissues. Furthermore, the key circRNAs (circCOL1A1, circAASS, circPTK2, circATP2B4, circDOCK1, circTTBK2, and circMCTP2) associated with the pathobiology of Redondoviridae-related periodontitis were identified by constructing circRNA-micro RNA (miRNA)-messenger RNA (mRNA) networks. Bioinformatics analyses demonstrated that abnormally expressed circRNAs might contribute to the etiopathogenesis and development of Redondoviridae-related periodontitis. This study's findings have enhanced the current understanding of the Redondoviridae-related periodontitis mechanism and provide insights into further applications for diagnostic markers and therapeutic uses.

Correcting projector lens distortion in real time with a scale-offset model for structured light illumination.

In fringe projection profilometry, inevitable distortion of optical lenses decreases phase accuracy and decreases the quality of 3D point clouds. For camera lens distortion, existing compensation methods include real time look-up tables derived from the related parameters of camera calibration. However, for projector lens distortion, so far, post-undistortion methods iteratively correcting lens distortion are relatively time-consuming while, despite avoiding iteration, pre-distortion methods are not suitable for binary fringe patterns. In this paper, we aim to achieve real-time phase correction for the projector by means of a scale-offset model that characterizes projector distortion by four correction parameters within a small-enough area, and thus we can speed up the post-undistortion by looking up tables. Experiments show that the proposed method can suppress the distortion error by a factor of 20 ×, i.e., the error of root mean square is less than 45 µm/0.7‰, while also proposed improving the computation speed by a factor of 50× over traditional iterative post-undistortion.

A novel ENAM mutation causes hypoplastic amelogenesis imperfecta.

OBJECTIVES: To identify the genetic cause of one Chinese family with hypoplastic amelogenesis imperfecta (AI) and explore the relationship between genotype and its phenotype. MATERIAL AND METHODS: One Chinese family with generalized hypoplastic AI was recruited. One deciduous tooth from the proband was subjected to scanning electron microscopy. Whole-exome sequencing was performed and identified mutation was confirmed by Sanger sequencing. Bioinformatics studies were further conducted to analyze potential deleterious effects of the mutation. RESULTS: The proband presented a typical hypoplastic AI phenotype whose teeth in deciduous and permanent dentitions showed thin, yellow, and hard enamel surface. The affected enamel in deciduous tooth showed irregular, broken, and collapsing enamel rods with borders of the enamel prisms undulated and structural shapes of prisms irregular. A novel homozygous nonsense mutation in the last exon of the enamelin (ENAM) gene (NM_031889.3; c.2078C>G) was identified in the proband, which was predicted to produce a highly truncated protein (NP_114095.2; p.(Ser693*)). This mutation was also identified in the proband's parents in heterozygous form. Surprisingly, the clinical phenotype of the heterozygous parents varied from a lack of penetrance to mild enamel defects. Additional bioinformatics studies demonstrated that the detected mutation could change the 3D structure of the ENAM protein and severely damaged the function of ENAM. CONCLUSION: The novel homozygous ENAM mutation resulted in hypoplastic AI in the present study. Our results provide new genetic evidence that mutations involved in ENAM contribute to hypoplastic AI.

Titanium-interlayer mediated hydroxyapatite coating on polyetheretherketone: a prospective study in patients with single-level cervical degenerative disc disease.

BACKGROUND: Currently, there are limited reports regarding investigation of the biological properties of polyetheretherketone (PEEK) coated with titanium (Ti) and hydroxyapatite (HA) in human. The objective of this study is to evaluate the in vivo response of the PEEK cages coated with Ti and HA versus uncoated PEEK cages after anterior cervical discectomy and fusion (ACDF) in patients with single-level cervical degenerative disc disease (CDDD). METHODS: Twenty-four patients with PEEK cages coated with Ti and HA (PEEK/Ti/HA group) were matched one-to-one with patients with uncoated PEEK cages (PEEK group) based on age, gender, and operative segment. All patients had been followed up for more than 2 years. Radiological assessments included intervertebral height (IH), C2-7 angle (C2-7a), segmental alignment (SA), and fusion rate. Clinical parameters included Visual Analogue Scale (VAS) and Japanese Orthopedic Association (JOA) scores. RESULTS: There was no statistical difference in SA, IH, and C2-7a between the two groups before and after surgery and all these parameters were restored postoperatively. The fusion rate of PEEK/Ti/HA group was significantly higher than PEEK group at 3-month post-operation (87.5% vs. 62.5%). At the last follow-up, the fusion rate of the both groups achieved 100%. The VAS and JOA scores were comparable between two groups and improved postoperatively. CONCLUSIONS: In patients with single-level ACDF, PEEK cage coated with Ti and HA provided a higher fusion rate than uncoated PEEK cage at 3-month post-operation, while both two cages could achieve solid osseous fusion at the last follow up. Compared with the uncoated PEEK cage, PEEK/Ti/HA cage yielded similar favorable segmental and overall cervical lordosis, IH, and clinical outcomes after the surgery.

3D-Printing Biodegradable PU/PAAM/Gel Hydrogel Scaffold with High Flexibility and Self-Adaptibility to Irregular Defects for Nonload-Bearing Bone Regeneration.

A three-dimensional (3D) printed biodegradable hydrogel scaffold with a strong self-expanding ability to conform to the contour of irregular bone defects and be closely adjacent to host tissues is reported herein. The scaffold has a triple cross-linked network structure consisting of photo-cross-linked polyacrylamide (PAAM) and polyurethane (PU) as the primary IPN network and chemical cross-linked gelatin (Gel) as the secondary network, which confers the scaffold with good mechanical properties. The addition of PU in the polymerization process of acrylamide (AAM) can improve the ultraviolet (UV) photocuring efficiency of the hydrogel and incorporate abundant hydrogen bonds between the PAAM copolymer chain and the PU chain. The results show that the hydrogel scaffold contains regular structures with smooth morphology, excellent dimensional stability, and uniform aperture. The degradation rate of the hydrogel scaffold is controllable through adjusting cross-linking agents and can be up to about 60% after degradation for 28 days. More importantly, the rapid self-inflating characteristic of the scaffold in water, that is, the volume of hydrogel scaffold can increase to about 8 times that of their own in an hour and can generate a slight compressive stress on the surrounding host tissue, thus stimulating the reconstruction and growth of new bone tissues. The in vitro experiment indicates that the scaffold is nontoxic and biocompatible. The in vivo experiment shows that the PU/PAAM/Gel chemically cross-linked scaffold displays the desirable osteogenic capability. This UV-curable 3D printed self-adaptive and degradable hydrogel scaffold holds great potential for nonload-bearing bone repair.

3D Printed Multifunctional Ti6Al4V-Based Hybrid Scaffold for the Management of Osteosarcoma.

Osteosarcoma is a challenging bone disease which is commonly associated with critically sized bone defects and cancer recurrence. Here, we designed and developed a multifunctional, hierarchical structured bone scaffold which can meet the demanding requirements for osteosarcoma management. The 3D printed Ti6Al4V scaffold with hydrothermally induced TiO2/TiP coating can offer a unique photothermal conversion property for in vitro bone cancer ablation. The scaffold is also infused with drug-laden gelatin/hydroxyapatite nanocomposite, which provides the ideal porous structure for cell adhesion/bone ingrowth and promotes bone regeneration. The scaffold has been thoroughly characterized by SEM/EDX, TEM, XPS, XRD, TGA, and UV-vis, and its in vitro bone cancer ablation efficiency has been validated using MG-63 cells. The hybrid scaffold showed excellent biocompatibility, and its osteointegration function has been demonstrated using an animal model.

Extending epipolar geometry for real-time structured light illumination II: lossless accuracy.

Structured light illumination is a process of 3D scanning using a digital projector to project a series of striped patterns that sweep a target surface, and based on the warping of the stripes viewed by a camera, the shape of the target can be reconstructed. In the case of scanning stripes separately in both horizontal and vertical directions, algorithms have been proposed that achieve real-time reconstruction through look-up tables; however, these look-up tables implement the inversion of one traditional lens projection matrix. In this Letter, we propose look-up tables constructed using (1) both views of a camera and a projector and (2) basic arithmetic operations rather than complex matrix operations to significantly reduce the total number of computations used to reconstruct a point cloud. Experiments show that, with the same accuracy, the proposed tables improve the computation speed by a factor of 6.66×, from 31.00 to 206.61 fps.

Microbiome variations in preschool children with halitosis.

OBJECTIVE: To assess the bacterial characteristics associated with intra-oral halitosis among Chinese preschool children. METHODS: An epidemiological study was conducted among 273 preschool children (aged 3-4 years) in Shanghai, China, followed by the collection of 16 samples from the tongue coating of caries-free healthy and halitosis participants. The characterization of associated microbial communities was performed using 16S rRNA gene sequencing on the MiSeq. RESULTS: Halitosis was observed in 13.2% of the preschool children. No significant difference in terms of microbial diversity (p > .05) was detected in the control and halitosis groups. The dominant bacterial genera observed in both groups included Prevotella, Veillonella, Streptococcus, Neisseria, Actinomyces, Haemophilus, and Leptotrichia. The relative proportions of thirteen species (including Leptotrichia sp. HMT_417, Prevotella Pallens, and Alloprevotella rava) were significantly higher in the halitosis group compared with the control group, whereas the distribution of seventeen species from genera Streptococcus, Gemella, and Kingella showed a higher abundance in the control group. Further investigation of interactions among species demonstrated obvious differences in two groups, indicating that various microorganisms interact to produce halitosis in preschool children. CONCLUSIONS: Overall, halitosis is associated with multi-microbial mutual interactions. The oral flora microorganisms may exert potentiating or inhibiting effects on each other.

A compliance real-time monitoring system for the management of the brace usage in adolescent idiopathic scoliosis patients: a pilot study.

BACKGROUND: Patient compliance is essential to the effectiveness of brace treatment for adolescent idiopathic scoliosis (AIS) patients. Subjective measurements like questionnaires and inquiries proved to be arguably inaccurate. Although some scholars have applied temperature/force monitors to measuring patient compliance objectively, few studies to date could monitor patient compliance in real time. The objective of this study is to describe and evaluate a compliance real-time monitoring system of the brace usage in AIS patients. METHODS: A compliance real-time monitoring system (specifically consisting of a compliance monitor, a WeChat Mini Program, a cloud-based storage system and a website backstage management system) was designed to manage the brace treatment. Thirty patients receiving brace treatment were enrolled. They were told to upload the data at least once a day. Clinicians downloaded the compliance data and communicated with the patients online based on their analysis of data at least once every 3 months. The measured force, quality compliance (measured force / baseline force), measured time, and quantity compliance (measured time/ prescribed time) were used to evaluate patient compliance. Patients were also asked to rate their satisfaction at the final follow-up. RESULTS: Twenty-eight patients were included in the final analysis. The mean baseline force was 1.23 ± 0.28 N. The mean measured force was 0.79 ± 0.29 N. The mean quality compliance was 64.8 ± 22.2%. The prescribed time of all patients was 23 h. The mean measured time was 14.1 ± 2.9 h. The mean quantity compliance was 61.3 ± 12.6%. Both the quality and quantity compliance during the first 3 months of treatment was significantly lower than the latter 3 months. In this study, 96.4% (27/28) patients were satisfied with the use of the monitoring system, among whom 21.4% (6/28) are very satisfied and 75.0% (21/28) are somewhat satisfied. CONCLUSIONS: The compliance real-time monitoring system, without evaluating the clinical and radiographic outcomes for now, has already shown some feasibility and effectiveness for the management of the brace usage in AIS patients. This system, as a useful tool for online patient management and patient-clinician communication, would be potentially employed on a large scale in future for clinicians to improve the compliance and satisfaction of AIS patients who have received brace treatment.

Titanium interlayer-mediated hydroxyapatite-coated polyetheretherketone cage in transforaminal lumbar interbody fusion surgery.

BACKGROUND: The variance in clinical responses to polyetheretherketone (PEEK) cages with titanium (Ti) and hydroxyapatite (HA) coatings (PEEK-Ti-HA cages) is still not clear. In this study, we aimed to evaluate the radiographic and clinical outcomes of patients undergoing TLIF using PEEK-Ti-HA cages with a particular focus on fusion rate. METHODS: A prospective and nonrandomized study was conducted to compare the outcomes of PEEK-Ti-HA cages (group A, n = 32) and uncoated PEEK cages (group B, n = 32). The follow up time was at least 2 years. The radiographic assessments included the regional lordosis (RL), disc height (DH), and fusion rate. The clinical indexes included the Japanese Orthopedic Association (JOA) scores and visual analog scale (VAS) scores (back and leg). RESULTS: No significant differences were found in the pre- and postoperative RL and DH between Group A and Group B. And RL and DH, even if there were any variance initially, were restored not long after surgery in both groups. Though Group A had a significantly higher fusion rate than group B at 3 months post-surgery (93.7% vs. 75.0%), the fusion rates for the two groups reached the same level (100%) when it comes to the final follow-up. Additionally, differences of VAS and JOA scores for the two groups in general approximate. CONCLUSIONS: PEEK-Ti-HA cages, in contrast with uncoated PEEK cages, produced a better fusion rate at 3 months after single-level TLIF. The fusion rates of both groups could get 100% at the final follow-up. PEEK-Ti-HA cages could achieve similar RL, DH, JOA scores and VAS scores in comparison with uncoated PEEK cages post-surgery.

Comparative analysis of the effects of collection methods on salivary steroids.

BACKGROUND: Steroid hormone test for saliva was a promising area of research, however the impact of different collection methods on salivary steroids was underexplored so far. This study was designed to compare the effects of different collection methods (unstimulated or stimulated by chewing paraffin, forepart or midstream) on salivary flow rate, concentrations and secretion rates of steroids in saliva. METHODS: Whole-saliva samples were collected from 10 systemically and orally healthy participants, whose forepart and midstream segments of saliva were collected under unstimulated and stimulated conditions, with the salivary flow rate of each sample recorded. The concentrations and secretion rates of salivary steroids including testosterone, dehydroepiandrosterone (DHEA) and progesterone were measured by ELISA, with the multiple of change calculated. RESULTS: The results indicated mechanical stimulation used in collection of saliva samples could affect concentrations and secretion rates of steroids, whereas forepart and midstream segments had little differences in levels of salivary steroids, which effects could be partly influenced by individual specificity. The asynchronism in change of secretion rate of steroids with that of salivary flow rate might play an important role during this course. CONCLUSION: Based on these findings, we suggested to use the same collection method throughout one analytical study on salivary steroids or in longitudinal observations to ensure the comparability of the saliva samples collected.

Analysis of salivary proteomic biomarkers for the surveillance of changes in high-risk status of early childhood caries.

BACKGROUND: Early childhood caries is an urgent public health concern. The aim of this study was to investigate salivary proteomic biomarkers for the surveillance of changes in the high-risk status of early childhood caries. The process involves the screening of specific salivary peptides that were differentially expressed only under dynamic changes in individual caries status. METHODS: Stimulated whole saliva samples were collected from 28 kindergarten children aged 3-4 years in Beijing at baseline and 3 months and 6 months after baseline. A total of 68 samples were collected. In terms of their caries status and progress during the observation period, participants were divided into 3 groups; 7 in the non-caries recurrence group, 6 in the caries recurrence group, and 15 in the healthy control group. Salivary peptides that exhibited no significant differences in cross-sectional comparisons between different groups of caries status but only expressed differentially along with dynamic changes of individual caries were screened using the technique of magnetic beads combined with matrix-assisted laser desorption-ionization time-of-flight mass spectrometry (MALDI-TOF MS). The technique of liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) was employed to identify the proteins from which these peptides were derived. RESULTS: We found two salivary peptides differentially expressed only under dynamic changes in individual caries status in the above comparisons; mass-to-charge ratio (m/z) values of the two peptides were 1045.9 and 2517.6, respectively (P < 0.05). Principal component analysis (PCA) and the decision tree model based on these two peptides showed an acceptable distinguishing ability for changes in the high-risk status of early childhood caries. The source proteins of the two peptides with m/z values of 1045.9 and 2517.6 were identified as submandibular gland androgen regulatory protein 3B (SMR-3B) and mucin-7, respectively. CONCLUSIONS: Two proteins in children's saliva, namely SMR-3B and mucin-7, have the potentiality to serve as candidate biomarkers for dynamic surveillance of changes in high-risk status of early childhood caries.