A Strategy for Enhancing Perpendicular Magnetic Anisotropy in Yttrium Iron Garnet Films.

In future information storage and processing, magnonics is one of the most promising candidates to replace traditional microelectronics. Yttrium iron garnet (YIG) films with perpendicular magnetic anisotropy (PMA) have aroused widespread interest in magnonics. Obtaining strong PMA in a thick YIG film with a small lattice mismatch (η) has been fascinating but challenging. Here, a novel strategy is proposed to reduce the required minimum strain value for producing PMA and increase the maximum thickness for maintaining PMA in YIG films by slight oxygen deficiency. Strong PMA is achieved in the YIG film with an η of only 0.4% and a film thickness up to 60 nm, representing the strongest PMA for such a small η reported so far. Combining transmission electron microscopy analyses, magnetic measurements, and a theoretical model, it is demonstrated that the enhancement of PMA physically originates from the reduction of saturation magnetization and the increase of magnetostriction coefficient induced by oxygen deficiency. The Gilbert damping values of the 60-nm-thick YIG films with PMA are on the order of 10-4. This strategy improves the flexibility for the practical applications of YIG-based magnonic devices and provides promising insights for the theoretical understanding and the experimental enhancement of PMA in garnet films.

Ferrite Concentrating and Shielding Structure Design of Wireless Power Transmitting Coil for Inductively Coupled Capsule Robot.

High permeability material, especially the ferrite, has been widely used in wireless power transfer (WPT) to enhance the power transfer efficiency (PTE). However, for the WPT system of inductively coupled capsule robot, the ferrite core is solely introduced in power receiving coil (PRC) configuration to enhance the coupling. As for the power transmitting coil (PTC), very few studies focus on the ferrite structure design, and only the magnetic concentrating is taken into account without careful design. Therefore, a novel ferrite structure for PTC giving consideration to the magnetic field concentration as well as the mitigation and shielding of the leaked magnetic field is proposed in this paper. The proposed design is realized by combing the ferrite concentrating part and shielding part into a whole and providing a low reluctance closed path for magnetic induction lines, thereby improving the inductive coupling and PTE. Through analyses and simulations, the parameters of the proposed configuration are designed and optimized in terms of average magnetic flux density, uniformity, and shielding effectiveness. Prototypes of PTC with different ferrite configurations are established, tested, and compared to validate the performance enhancement. The experimental results indicate that the proposed design notably improves the average power delivered to the load from 373 mW to 822 mW and the PTE from 7.47% to 16.44%, with a relative percentage difference of 119.9%. Moreover, the power transfer stability is slightly enhanced from 91.7% to 92.8%.

Wireless power transfer system for capsule robot designed by radial square transmitting coil pair with novel ferrite structure.

BACKGROUND: Wireless power transmission for capsule robots has always posed challenges due to the unpredictable postures. METHODS: A radial transmitting coil with a novel ferrite structure is proposed, which consists of two parts with the function of converging magnetic induction lines and reducing magnetic leakage. To improve the flux density, uniformity, and shielding effectiveness, the design parameters are discussed and optimized on the basis of analytical calculations and simulation analysis. RESULTS: The proposed ferrite structure improves the power transfer efficiency from 2.78% to 5.21%. Additionally, the power transfer stability showed a slight improvement from 76.4% to 77.6%, while magnetic leakage was reduced by 84%. Finally, the human tissue safety is also discussed and verified. CONCLUSIONS: The wireless power transfer system is shown to be feasible and safe.

Mg Substitution Induced TM/Vacancy Disordering and Enhanced Structural Stability in Layered Oxide Cathode Materials.

Anionic redox is an effective way to increase the capacity of the cathode materials. Na2Mn3O7 [Na4/7[Mn6/7□1/7]O2, □ for the transition metal (TM) vacancies] with native and ordered TM vacancies can conduct a reversible oxygen redox and be a promising high-energy cathode material for sodium-ion batteries (SIBs). However, its phase transition at low potentials (∼1.5 V vs Na+/Na) induces potential decays. Herein, magnesium (Mg) is doped on the TM vacancies to form a disordered Mn/Mg/□ arrangement in the TM layer. The Mg substitution suppresses the oxygen oxidation at ∼4.2 V by reducing the number of the Na-O-□ configurations. Meanwhile, this flexible disordering structure inhibits the generation of the dissolvable Mn2+ ions and mitigates the phase transition at ∼1.6 V. Therefore, the Mg doping improves the structural stability and its cycling performance in 1.5-4.5 V. The disordering arrangement endows Na0.49Mn0.86Mg0.06□0.08O2 with a higher Na+ diffusivity and improved rate performance. Our study reveals that oxygen oxidation is highly dependent on the ordering/disordering arrangements in the cathode materials. This work provides insights into the balance of anionic and cationic redox for enhancing the structural stability and electrochemical performance in the SIBs.

Design and analysis of a wireless power transfer system for capsule robot using an optimised planar square spiral transmitting coil pair.

BACKGROUND: The wireless power transfer system (WPTS) is a promising way to continuously provide efficient and stable power for gastrointestinal capsule robots with active movement ability. METHODS: The proposed WPTS using an optimised planar square spiral transmitting coil pair with space-saving structure can flexibly adjust the distance between the coils according to the patient's condition, and thus has better applicability. To improve power transfer efficiency and uniformity of the generated magnetic field, design parameters are discussed and optimised based on the analytical calculation and simulation analysis. RESULTS: The power demand can be guaranteed with spacing distance of 350-500 mm and the peak received power of 1124 mW with a remarkable transfer efficiency of 7.8% can be obtained when the spacing reaches the minimum. The human electromagnetic exposure safety in different situations is also discussed and verified. CONCLUSIONS: The WPTS can provide power for capsule robots safely and efficiently.

Efficient Power Receiving Coil With Novel Ferrite Core Structure for Capsule Robot.

Power receiving coils (PRCs) with ferrite cores are widely used in wireless power transfer (WPT) for capsule robots (CRs) to enhance the power transfer efficiency (PTE). However, due to the large demagnetizing factor, the traditional one-dimensional hollow cylindrical ferrite core has its limitations in volume and performance improvement, which needs to be reconsidered. To this end, we propose a novel PRC equipped with a delicate, lightweight, and more efficient ferrite core structure in this paper. Different from the traditional ferrite core structure, the proposed design composed of distributed ferrite cores and end covers aims to minimize the negative impact of demagnetization on PTE and enhance the magnetic flux concentration. Based on the analysis of the PTE and mutual inductance, influence of the introduced cores on the WPT system is emphasized. The relationship between the change of ferrite core structures and the demagnetizing factors, as well as the effective permeability, is analyzed and simulated. Prototypes of PRCs with different ferrite core configurations are established, tested, and compared to validate the performance enhancement. Experimental results on the power delivered to the load (PDL) and PTE indicate that the proposed design has a volume reduction of 24.4% but performance enhancement of 36% compared with the traditional one with hollow cylindrical ferrite core, thanks to the structure-based demagnetizing factor optimization.