Exploring the midline soft tissue surface changes from 12 to 15 years of age in three distinct country population cohorts.

INTRODUCTION: Several studies have highlighted differences in the facial features in a White European population. Genetics appear to have a major influence on normal facial variation, and environmental factors are likely to have minor influences on face shape directly or through epigenetic mechanisms. AIM: The aim of this longitudinal cohort study is to determine the rate of change in midline facial landmarks in three distinct homogenous population groups (Finnish, Latvian, and Welsh) from 12.8 to 15.3 years of age. This age range covers the pubertal growth period for the majority of boys and girls. METHODS: A cohort of children aged 12 were monitored for facial growth in three countries [Finland (n = 60), Latvia (n = 107), and Wales (n = 96)]. Three-dimensional facial surface images were acquired (using either laser or photogrammetric methods) at regular intervals (6-12 months) for 4 years. Ethical approval was granted in each country. Nine midline landmarks were identified and the relative spatial positions of these surface landmarks were measured relative to the mid-endocanthion (men) over a 4-year period. RESULTS: This study reports the children who attended 95 per cent of all scanning sessions (Finland 48 out of 60; Latvia 104 out of 107; Wales 50 out of 96). Considerable facial variation is seen for all countries and sexes. There are clear patterns of growth that show different magnitudes at different age groups for the different country groups, sexes, and facial parameters. The greatest single yearly growth rate (5.4 mm) was seen for Welsh males for men-pogonion distance at 13.6 years of age. Males exhibit greater rates of growth compared to females. These variations in magnitude and timings are likely to be influenced by genetic ancestry as a result of population migration. CONCLUSION: The midline points are a simple and valid method to assess the relative spatial positions of facial surface landmarks. This study confirms previous reports on the subtle differences in facial shapes and sizes of male and female children in different populations and also highlights the magnitudes and timings of growth for various midline landmark distances to the men point.

Genome-wide association study of primary tooth eruption identifies pleiotropic loci associated with height and craniofacial distances.

Twin and family studies indicate that the timing of primary tooth eruption is highly heritable, with estimates typically exceeding 80%. To identify variants involved in primary tooth eruption, we performed a population-based genome-wide association study of 'age at first tooth' and 'number of teeth' using 5998 and 6609 individuals, respectively, from the Avon Longitudinal Study of Parents and Children (ALSPAC) and 5403 individuals from the 1966 Northern Finland Birth Cohort (NFBC1966). We tested 2 446 724 SNPs imputed in both studies. Analyses were controlled for the effect of gestational age, sex and age of measurement. Results from the two studies were combined using fixed effects inverse variance meta-analysis. We identified a total of 15 independent loci, with 10 loci reaching genome-wide significance (P < 5 × 10(-8)) for 'age at first tooth' and 11 loci for 'number of teeth'. Together, these associations explain 6.06% of the variation in 'age of first tooth' and 4.76% of the variation in 'number of teeth'. The identified loci included eight previously unidentified loci, some containing genes known to play a role in tooth and other developmental pathways, including an SNP in the protein-coding region of BMP4 (rs17563, P = 9.080 × 10(-17)). Three of these loci, containing the genes HMGA2, AJUBA and ADK, also showed evidence of association with craniofacial distances, particularly those indexing facial width. Our results suggest that the genome-wide association approach is a powerful strategy for detecting variants involved in tooth eruption, and potentially craniofacial growth and more generally organ development.

Genome-wide association study of three-dimensional facial morphology identifies a variant in PAX3 associated with nasion position.

Craniofacial morphology is highly heritable, but little is known about which genetic variants influence normal facial variation in the general population. We aimed to identify genetic variants associated with normal facial variation in a population-based cohort of 15-year-olds from the Avon Longitudinal Study of Parents and Children. 3D high-resolution images were obtained with two laser scanners, these were merged and aligned, and 22 landmarks were identified and their x, y, and z coordinates used to generate 54 3D distances reflecting facial features. 14 principal components (PCs) were also generated from the landmark locations. We carried out genome-wide association analyses of these distances and PCs in 2,185 adolescents and attempted to replicate any significant associations in a further 1,622 participants. In the discovery analysis no associations were observed with the PCs, but we identified four associations with the distances, and one of these, the association between rs7559271 in PAX3 and the nasion to midendocanthion distance (n-men), was replicated (p = 4 × 10(-7)). In a combined analysis, each G allele of rs7559271 was associated with an increase in n-men distance of 0.39 mm (p = 4 × 10(-16)), explaining 1.3% of the variance. Independent associations were observed in both the z (nasion prominence) and y (nasion height) dimensions (p = 9 × 10(-9) and p = 9 × 10(-10), respectively), suggesting that the locus primarily influences growth in the yz plane. Rare variants in PAX3 are known to cause Waardenburg syndrome, which involves deafness, pigmentary abnormalities, and facial characteristics including a broad nasal bridge. Our findings show that common variants within this gene also influence normal craniofacial development.

Facial fluctuating asymmetry is not associated with childhood ill-health in a large British cohort study.

The idea that symmetry in facial traits is associated with attractiveness because it reliably indicates good physiological health, particularly to potential sexual partners, has generated an extensive literature on the evolution of human mate choice. However, large-scale tests of this hypothesis using direct or longitudinal assessments of physiological health are lacking. Here, we investigate relationships between facial fluctuating asymmetry (FA) and detailed individual health histories in a sample (n = 4732) derived from a large longitudinal study (Avon Longitudinal Study of Parents and Children) in South West England. Facial FA was assessed using geometric morphometric analysis of facial landmark configurations derived from three-dimensional facial scans taken at 15 years of age. Facial FA was not associated with longitudinal measures of childhood health. However, there was a very small negative association between facial FA and IQ that remained significant after correcting for a positive allometric relationship between FA and face size. Overall, this study does not support the idea that facial symmetry acts as a reliable cue to physiological health. Consequently, if preferences for facial symmetry do represent an evolved adaptation, then they probably function not to provide marginal fitness benefits by choosing between relatively healthy individuals on the basis of small differences in FA, but rather evolved to motivate avoidance of markers of substantial developmental disturbance and significant pathology.

Three-dimensional quantification of facial symmetry in adolescents using laser surface scanning.

Laser scanning is a non-invasive method for three-dimensional assessment of facial morphology and symmetry. The aim of this study was to quantify facial symmetry in healthy adolescents and explore if there is any gender difference. Facial scans of 270 subjects, 123 males and 147 females (aged 15.3 ± 0.1 years, range 14.6-15.6), were randomly selected from the Avon Longitudinal Study of Parents and Children. Facial scans were processed and analysed using in-house developed subroutines for commercial software. The surface matching between the original face and its mirror image was measured for the whole face, upper, middle, and lower facial thirds. In addition, 3 angular and 14 linear parameters were measured. The percentage of symmetry of the whole face was significantly lower in males (53.49 ± 10.73 per cent) than in females (58.50 ± 10.27 per cent; P < 0.01). There was no statistically significant difference in the amount of symmetry among facial thirds within each gender (P > 0.05). Average values of linear parameters were less than 1 mm and did not differ significantly between genders (P > 0.05). One angular parameter showed slight lip line asymmetry in both genders. Faces of male 15-year-old adolescents were less symmetric than those of females, but the difference in the amount of symmetry, albeit statistically significant, may not be clinically relevant. Upper, middle, and lower thirds of the face did not differ in the amount of three-dimensional symmetry. Angular and linear parameters of facial symmetry did not show any gender difference.

Facial shape and asymmetry in 5-year-old children with repaired unilateral cleft lip and/or palate: an exploratory study using laser scanning.

To investigate the feasibility of facial laser scanning in pre-school children and to demonstrate landmark-independent three-dimensional (3D) analyses for assessment of facial deformity in 5-year-old children with repaired non-syndromic unilateral cleft lip and/or cleft palate (UCL/P). Faces of twelve 5-year-old children with UCL/P (recruited from university hospitals in Cardiff and Swansea, UK) and 35 age-matched healthy children (recruited from a primary school in Cardiff) were laser scanned. Cleft deformity was assessed by comparing individual faces against the age and gender-matched average face of healthy children. Facial asymmetry was quantified by comparing original faces with their mirror images. All facial scans had good quality. In a group of six children with isolated cleft palate coincidence with the average norm ranged from 18.8 to 26.4 per cent. There was no statistically significant difference in facial asymmetry when compared with healthy children (P > 0.05). In a group of six children with UCL with or without cleft palate coincidence with the average norm ranged from 14.8 to 29.8 per cent. Forehead, midface and mandibular deficiencies were a consistent finding, ranging from 4 to 10mm. The amount of 3D facial asymmetry was higher in this group (P < 0.05). Facial laser scanning can be a suitable method for 3D assessment of facial morphology in pre-school children, provided children are well prepared. Landmark-independent methods of 3D analyses can contribute to understanding and quantification of facial soft tissue cleft deformity and be useful in clinical practice.

A three-dimensional analysis of the effect of atopy on face shape.

Three-dimensional (3D) imaging technology has been widely used to analyse facial morphology and has revealed an influence of some medical conditions on craniofacial growth and morphology. The aim of the study is to investigate whether craniofacial morphology is different in atopic Caucasian children compared with controls. Study design included observational longitudinal cohort study. Atopy was diagnosed via skin-prick tests performed at 7.5 years of age. The cohort was followed to 15 years of age as part of the Avon Longitudinal Study of Parents and Children (ALSPAC). A total of 734 atopic and 2829 controls were identified. 3D laser surface facial scans were obtained at 15 years of age. Twenty-one reproducible facial landmarks (x, y, z co-ordinates) were identified on each facial scan. Inter-landmark distances and average facial shells for atopic and non-atopic children were compared with explore differences in face shape between the groups. Both total anterior face height (pg-g, pg-men) and mid-face height (Is-men, sn-men, n-sn) were longer (0.6 and 0.4mm respectively) in atopic children when compared with non-atopic children. No facial differences were detected in the transverse and antero-posterior relationships. Small but statistically significant differences were detected in the total and mid-face height between atopic and non-atopic children. No differences were detected in the transverse and antero-posterior relationships.

The influence of asthma on face shape: a three-dimensional study.

Respiratory activity may have an influence on craniofacial development and interact with genetic and environmental factors. It has been suggested that certain medical conditions such as asthma have an influence on face shape. The aim of the study is to investigate whether facial shape is different in individuals diagnosed as having asthma compared with controls. Study design included observational longitudinal cohort study. Asthma was defined as reported wheezing diagnosed at age 7 years and 6 months. The cohort was followed to 15 years of age as part of the Avon Longitudinal Study of Parents and Children. A total of 418 asthmatics and 3010 controls were identified. Three-dimensional laser surface facial scans were obtained. Twenty-one reproducible facial landmarks (x, y, z co-ordinates) were identified. Average facial shells were created for asthmatic and non-asthmatic males and females to explore surface differences. The inter-ala distance was 0.4mm wider (95% CI) and mid-face height was 0.4mm (95% CI) shorter in asthmatic females when compared with non-asthmatic females. No facial differences were detected in male subjects. Small but statistically significant differences were detected in mid-face height and inter-ala width between asthmatic and non-asthmatic females. No differences were detected in males. The lack of detection of any facial differences in males may be explained by significant facial variation as a result of achieving different stages of facial growth due to pubertal changes, which may mask any underlying condition effect.

Three-dimensional longitudinal assessment of facial symmetry in adolescents.

Recent advances in laser scanning technology provide the opportunity to examine faces in three dimensions. The aim of this prospective clinical study was to explore facial symmetry in healthy growing individuals and determine whether asymmetric changes occur during adolescent growth. Non-invasive laser surface scanning was performed to capture facial images of 60 Caucasian Finnish adolescents (30 males and 30 females, mean 11.5 years). Facial symmetry was analysed on images obtained at the initial scanning (T1), 2.5 (T2), and 4.5 (T3) years thereafter. The final sample consisted of 39 adolescents (19 males and 20 females, mean 16 years). Three-dimensional images were processed and analysed using an in-house developed subroutine for commercial software. A mirror image was generated and superimposed on the original image to create a symmetric face and establish the midsagittal plane. The surface matching of the original face and the mirror face (amount of symmetry) was measured for the whole face, upper, middle, and lower thirds at tolerance level 0.5 mm and presented with colour maps. Three angular and 14 linear measurements were made based on 21 soft tissue landmarks, which have proven to be reliable. The results of the Friedman test showed that facial symmetry parameters did not significantly differ over time (P > 0.05). Mann-Whitney U-test did not reveal statistically significant differences between genders at any time point (P > 0.05). Facial growth of healthy individuals during adolescence is symmetric, although further investigation on larger randomized sample is suggested.

The assessment of facial variation in 4747 British school children.

The aim of this study is to identify key components contributing to facial variation in a large population-based sample of 15.5-year-old children (2514 females and 2233 males). The subjects were recruited from the Avon Longitudinal Study of Parents and Children. Three-dimensional facial images were obtained for each subject using two high-resolution Konica Minolta laser scanners. Twenty-one reproducible facial landmarks were identified and their coordinates were recorded. The facial images were registered using Procrustes analysis. Principal component analysis was then employed to identify independent groups of correlated coordinates. For the total data set, 14 principal components (PCs) were identified which explained 82 per cent of the total variance, with the first three components accounting for 46 per cent of the variance. Similar results were obtained for males and females separately with only subtle gender differences in some PCs. Facial features may be treated as a multidimensional statistical continuum with respect to the PCs. The first three PCs characterize the face in terms of height, width, and prominence of the nose. The derived PCs may be useful to identify and classify faces according to a scale of normality.

Multilevel Analysis of the Influence of Maternal Smoking and Alcohol Consumption on the Facial Shape of English Adolescents.

This cross-sectional study aims to assess the influence of maternal smoking and alcohol consumption during pregnancy on the facial shape of non-syndromic English adolescents and demonstrate the potential benefits of using multilevel principal component analysis (mPCA). A cohort of 3755 non-syndromic 15-year-olds from the Avon Longitudinal Study of Parents and Children (ALSPAC), England, were included. Maternal smoking and alcohol consumption during the 1st and 2nd trimesters of pregnancy were determined via questionnaire at 18 weeks gestation. 21 facial landmarks, used as a proxy for the main facial features, were manually plotted onto 3D facial scans of the participants. The effect of maternal smoking and maternal alcohol consumption (average 1-2 glasses per week) was minimal, with 0.66% and 0.48% of the variation in the 21 landmarks of non-syndromic offspring explained, respectively. This study provides a further example of mPCA being used effectively as a descriptive analysis in facial shape research. This is the first example of mPCA being extended to four levels to assess the influence of environmental factors. Further work on the influence of high/low levels of smoking and alcohol and providing inferential evidence is required.

Spatially Dense 3D Facial Heritability and Modules of Co-heritability in a Father-Offspring Design.

Introduction: The human face is a complex trait displaying a strong genetic component as illustrated by various studies on facial heritability. Most of these start from sparse descriptions of facial shape using a limited set of landmarks. Subsequently, facial features are preselected as univariate measurements or principal components and the heritability is estimated for each of these features separately. However, none of these studies investigated multivariate facial features, nor the co-heritability between different facial features. Here we report a spatially dense multivariate analysis of facial heritability and co-heritability starting from data from fathers and their children available within ALSPAC. Additionally, we provide an elaborate overview of related craniofacial heritability studies. Methods: In total, 3D facial images of 762 father-offspring pairs were retained after quality control. An anthropometric mask was applied to these images to establish spatially dense quasi-landmark configurations. Partial least squares regression was performed and the (co-)heritability for all quasi-landmarks (∼7160) was computed as twice the regression coefficient. Subsequently, these were used as input to a hierarchical facial segmentation, resulting in the definition of facial modules that are internally integrated through the biological mechanisms of inheritance. Finally, multivariate heritability estimates were obtained for each of the resulting modules. Results: Nearly all modular estimates reached statistical significance under 1,000,000 permutations and after multiple testing correction (p ≤ 1.3889 × 10-3), displaying low to high heritability scores. Particular facial areas showing the greatest heritability were similar for both sons and daughters. However, higher estimates were obtained in the former. These areas included the global face, upper facial part (encompassing the nasion, zygomas and forehead) and nose, with values reaching 82% in boys and 72% in girls. The lower parts of the face only showed low to moderate levels of heritability. Conclusion: In this work, we refrain from reducing facial variation to a series of individual measurements and analyze the heritability and co-heritability from spatially dense landmark configurations at multiple levels of organization. Finally, a multivariate estimation of heritability for global-to-local facial segments is reported. Knowledge of the genetic determination of facial shape is useful in the identification of genetic variants that underlie normal-range facial variation.

What's in a Smile? Initial Analyses of Dynamic Changes in Facial Shape and Appearance.

Single-level principal component analysis (PCA) and multi-level PCA (mPCA) methods are applied here to a set of (2D frontal) facial images from a group of 80 Finnish subjects (34 male; 46 female) with two different facial expressions (smiling and neutral) per subject. Inspection of eigenvalues gives insight into the importance of different factors affecting shapes, including: biological sex, facial expression (neutral versus smiling), and all other variations. Biological sex and facial expression are shown to be reflected in those components at appropriate levels of the mPCA model. Dynamic 3D shape data for all phases of a smile made up a second dataset sampled from 60 adult British subjects (31 male; 29 female). Modes of variation reflected the act of smiling at the correct level of the mPCA model. Seven phases of the dynamic smiles are identified: rest pre-smile, onset 1 (acceleration), onset 2 (deceleration), apex, offset 1 (acceleration), offset 2 (deceleration), and rest post-smile. A clear cycle is observed in standardized scores at an appropriate level for mPCA and in single-level PCA. mPCA can be used to study static shapes and images, as well as dynamic changes in shape. It gave us much insight into the question "what's in a smile?".

A constitutive model for the periodontal ligament as a compressible transversely isotropic visco-hyperelastic tissue.

This study is devoted to the development of a non-linear anisotropic model for the human periodontal ligament (PDL). A thorough knowledge of the behaviour of the PDL is vital in understanding the mechanics of orthodontic tooth mobility, soft tissue response and proposed treatment plans. There is considerable evidence that the deformation of the PDL is the key factor determining the orthodontic tooth movement. The paper focuses on the biomechanical aspect of the behaviour of the PDL. In terms of continuous mechanics, the PDL may be treated as an anisotropic poro-visco-hyperelastic fibre-reinforced compressible material which is subject to large deformations and has an essentially non-linear behaviour. Furthermore, there are issues related to the non-linear tooth and PDL geometry. A new constitutive model for the PDL is proposed. The macroscopic continuum approach is used. The model is based on the non-linear large deformation theory, involving the Lagrangian description. The material is assumed to be compressible, visco-hyperelastic and transversely isotropic. A free-energy function is suggested that incorporates the properties. It also takes into account that the PDL behaves differently in tension and compression. The free-energy function and the associated constitutive equations involve several material parameters, which are to be evaluated from experimental strain-stress data available from the literature and the tooth movement experiments conducted by our team using novel optical motion analysis techniques.

Genetic and Environmental Contributions to Facial Morphological Variation: A 3D Population-Based Twin Study.

INTRODUCTION: Facial phenotype is influenced by genes and environment; however, little is known about their relative contributions to normal facial morphology. The aim of this study was to assess the relative genetic and environmental contributions to facial morphological variation using a three-dimensional (3D) population-based approach and the classical twin study design. MATERIALS AND METHODS: 3D facial images of 1380 female twins from the TwinsUK Registry database were used. All faces were landmarked, by manually placing 37 landmark points, and Procrustes registered. Three groups of traits were extracted and analysed: 19 principal components (uPC) and 23 principal components (sPC), derived from the unscaled and scaled landmark configurations respectively, and 1275 linear distances measured between 51 landmarks (37 manually identified and 14 automatically calculated). The intraclass correlation coefficients, rMZ and rDZ, broad-sense heritability (h2), common (c2) and unique (e2) environment contributions were calculated for all traits for the monozygotic (MZ) and dizygotic (DZ) twins. RESULTS: Heritability of 13 uPC and 17 sPC reached statistical significance, with h2 ranging from 38.8% to 78.5% in the former and 30.5% to 84.8% in the latter group. Also, 1222 distances showed evidence of genetic control. Common environment contributed to one PC in both groups and 53 linear distances (4.3%). Unique environment contributed to 17 uPC and 20 sPC and 1245 distances. CONCLUSIONS: Genetic factors can explain more than 70% of the phenotypic facial variation in facial size, nose (width, prominence and height), lips prominence and inter-ocular distance. A few traits have shown potential dominant genetic influence: the prominence and height of the nose, the lower lip prominence in relation to the chin and upper lip philtrum length. Environmental contribution to facial variation seems to be the greatest for the mandibular ramus height and horizontal facial asymmetry.

The influence of snoring, mouth breathing and apnoea on facial morphology in late childhood: a three-dimensional study.

OBJECTIVE: To explore the relationship between the prevalence of sleep disordered breathing (SDB) and face shape morphology in a large cohort of 15-year-old children. DESIGN: Observational longitudinal cohort study SETTING: Avon Longitudinal Study of Parents and Children (ALSPAC), South West of England. PARTICIPANTS: Three-dimensional surface laser scans were taken for 4784 white British children from the ALSPAC during a follow-up clinic. A total of 1724 children with sleep disordered breathing (SDB) and 1862 healthy children were identified via parents' report of sleep disordered symptoms for their children. We excluded from the original cohort all children identified as having congenital abnormalities, diagnoses associated with poor growth and children with adenoidectomy and/or tonsillectomy. MAIN OUTCOME MEASURES: Parents in the ALSPAC reported sleep disordered symptoms (snoring, mouth breathing and apnoea) for their children at 6, 18, 30, 42, 57, 69 and 81 months. Average facial shells were created for children with and without SDB in order to explore surface differences. RESULTS: Differences in facial measurements were found between the children with and without SDB throughout early childhood. The mean differences included an increase in face height in SDB children of 0.3 mm (95% CI -0.52 to -0.05); a decrease in mandibular prominence of 0.9° (95% CI -1.30 to -0.42) in SDB children; and a decrease in nose prominence and width of 0.12 mm (95% CI 0.00 to 0.24) and 0.72 mm (95% CI -0.10 to -0.25), respectively, in SDB children. The odds of children exhibiting symptoms of SDB increased significantly with respect to increased face height and mandible angle, but reduced with increased nose width and prominence. CONCLUSIONS: The combination of a long face, reduced nose prominence and width, and a retrognathic mandible may be diagnostic facial features of SBD that may warrant a referral to specialists for the evaluation of other clinical symptoms of SDB.

A geometric morphometric approach to the analysis of lip shape during speech: development of a clinical outcome measure.

Objective assessments of lip movement can be beneficial in many disciplines including visual speech recognition, for surgical outcome assessment in patients with cleft lip and for the rehabilitation of patients with facial nerve impairments. The aim of this study was to develop an outcome measure for lip shape during speech using statistical shape analysis techniques. Lip movements during speech were captured from a sample of adult subjects considered as average using a three-dimensional motion capture system. Geometric Morphometrics was employed to extract three-dimensional coordinate data for lip shape during four spoken words decomposed into seven visemes (which included the resting lip shape). Canonical variate analysis was carried out in an attempt to statistically discriminate the seven visemes. The results showed that the second canonical variate discriminated the resting lip shape from articulation of the utterances and accounted for 17.2% of the total variance of the model. The first canonical variate was significant in discriminating between the utterances and accounted for 72.8% of the total variance of the model. The outcome measure was created using the 95% confidence intervals of the canonical variate scores for each subject plotted as ellipses for each viseme. The method and outcome model is proposed as reference to compare lip movement during speech in similar population groups.

A population-based cross-sectional study of the association between facial morphology and cardiometabolic risk factors in adolescence.

OBJECTIVE: To determine whether facial morphology is associated with fasting insulin, glucose and lipids independent of body mass index (BMI) in adolescents. DESIGN: Population-based cross-sectional study. SETTING: Avon Longitudinal Study of Parents and Children (ALSPAC), South West of England. PARTICIPANTS: From the ALSPAC database of 4747 three-dimensional facial laser scans, collected during a follow-up clinic at the age of 15, 2348 white British adolescents (1127 males and 1221 females) were selected on the basis of complete data on cardiometabolic parameters, BMI and Tanner's pubertal stage. MAIN OUTCOME MEASURES: Fasting insulin, glucose and lipids (triglycerides, high-density lipoprotein cholesterol (HDLc) and low-density lipoprotein cholesterol (LDLc)). RESULTS: On the basis of the collection of 63 x, y and z coordinates of 21 anthropometric landmarks, 14 facial principal components (PCs) were identified. These components explained 82% of the variation in facial morphology and were used as exposure variables. With adjustment for age, gender and pubertal stage, seven PCs were associated with fasting insulin, none with glucose, three with triglycerides, three with HDLc and four with LDLc. After additional adjustment for BMI, four PCs remained associated with fasting insulin, one with triglycerides and two with LDLc. None of these associations withstood adjustment for multiple comparisons. CONCLUSIONS: These initial hypotheses generating analyses provide no evidence that facial morphology is importantly related to cardiometabolic outcomes. Further examination might be warranted. Facial morphology assessment may have value in identifying other areas of disease risk.

[New perspectives on craniofacial growth]. / Nouvelles perspectives sur la croissance cranio-faciale.

There are subtle facial differences that make people unique. We can distinguish between individuals of different gender, age, ethnicity, race and face type. Traditionally, orthodontists have approached facial assessment using lateral skull and posterior/anterior radiographs which could be combined to build a three-dimensional assessment. The aim of this article is to present an outline for a new way of looking at facial growth.

A comparison of plaster, digital and reconstructed study model accuracy.

OBJECTIVES: To evaluate the accuracy and reproducibility of a three-dimensional (3D) optical laser-scanning device to record the surface detail of plaster study models. To determine the accuracy of physical model replicas constructed from the 3D digital files. DESIGN AND SETTING: A method comparison study using 30 dental study models held in the Orthodontic Department, School of Dentistry, Cardiff University. MATERIALS AND METHODS: Each model was captured three-dimensionally, using a commercially available Minolta VIVID 900 non-contact 3D surface laser scanner (Konica Minolta Inc., Tokyo, Japan), a rotary stage and Easy3DScan integrating software (TowerGraphics, Lucca, Italy). Linear measurements were recorded between landmarks, directly on each of the plaster models and indirectly on the 3D digital surface models, on two separate occasions by a single examiner. Physical replicas of two digital models were also reconstructed from their scanned data files, using a rapid prototyping (RP) manufacturing process, and directly evaluated for dimensional accuracy. RESULTS: The mean difference between measurements made directly on the plaster models and those made on the 3D digital surface models was 0.14 mm, and was not statistically significant (P = 0.237). The mean difference between measurements made on both the plaster and virtual models and those on the RP models, in the z plane was highly statistically significant (P <0.001). CONCLUSIONS: The Minolta VIVID 900 digitizer is a reliable device for capturing the surface detail of plaster study models three-dimensionally in a digital format but physical models of appropriate detail and accuracy cannot be reproduced from scanned data using the RP technique described.