Raman Spectral Analysis in the CHx-Stretching Region as a Guiding Beacon for Non-Targeted, Disruption-Free Monitoring of Germination and Biofilm Formation in the Green Seaweed Ulva.

Raman spectroscopy was used to study the complex interactions and morphogenesis of the green seaweed Ulva (Chlorophyta) and its associated bacteria under controlled conditions in a reductionist model system. Integrating multiple imaging techniques contributes to a more comprehensive understanding of these biological processes. Therefore, Raman spectroscopy was introduced as a non-invasive, label-free tool for examining chemical information of the tripartite community Ulva mutabilis-Roseovarius sp.-Maribacter sp. The study explored cell differentiation, cell wall protrusion, and bacterial-macroalgae interactions of intact algal thalli. Using Raman spectroscopy, the analysis of the CHx-stretching wavenumber region distinguished spatial regions in Ulva germination and cellular malformations under axenic conditions and upon inoculation with a specific bacterium in bipartite communities. The spectral information was used to guide in-depth analyses within the fingerprint region and to identify substance classes such as proteins, lipids, and polysaccharides, including evidence for ulvan found in cell wall protrusions.

A polyyne toxin produced by an antagonistic bacterium blinds and lyses a Chlamydomonad alga.

Algae are key contributors to global carbon fixation and form the basis of many food webs. In nature, their growth is often supported or suppressed by microorganisms. The bacterium Pseudomonas protegens Pf-5 arrests the growth of the green unicellular alga Chlamydomonas reinhardtii, deflagellates the alga by the cyclic lipopeptide orfamide A, and alters its morphology [P. Aiyar et al., Nat. Commun. 8, 1756 (2017)]. Using a combination of Raman microspectroscopy, genome mining, and mutational analysis, we discovered a polyyne toxin, protegencin, which is secreted by P. protegens, penetrates the algal cells, and causes destruction of the carotenoids of their primitive visual system, the eyespot. Together with secreted orfamide A, protegencin thus prevents the phototactic behavior of C. reinhardtii A mutant of P. protegens deficient in protegencin production does not affect growth or eyespot carotenoids of C. reinhardtii Protegencin acts in a direct and destructive way by lysing and killing the algal cells. The toxic effect of protegencin is also observed in an eyeless mutant and with the colony-forming Chlorophyte alga Gonium pectorale These data reveal a two-pronged molecular strategy involving a cyclic lipopeptide and a conjugated tetrayne used by bacteria to attack select Chlamydomonad algae. In conjunction with the bloom-forming activity of several chlorophytes and the presence of the protegencin gene cluster in over 50 different Pseudomonas genomes [A. J. Mullins et al., bioRxiv [Preprint] (2021). https://www.biorxiv.org/content/10.1101/2021.03.05.433886v1 (Accessed 17 April 2021)], these data are highly relevant to ecological interactions between Chlorophyte algae and Pseudomonadales bacteria.

Effects of saline submersion at body temperature on airway supportive devices including a novel nasopharyngeal device produced using 3D-printing.

PURPOSE: This study investigated dimension changes of various nasopharyngeal airways, including a novel self-supporting device, after saline submersion at body temperature to simulate in-vivo use. Dimension changes over time may reduce efficacy during long-term use and require sizing adjustments or limits on duration of use. MATERIALS AND METHODS: Cuffless Covidien endotracheal tubes, pediatric Rusch fixed flange polyvinyl chloride nasal airway tubes, pediatric Rusch Robertazzi style Mediprene nasal airway tubes, and novel silicone elastomer self-supporting nasopharyngeal airways were fully submerged in 0.9 % normal saline solution incubated at 37 degrees Celsius for 15 days. All devices had tube length and wall thickness measured after 0, 1, 2, 3, 4, 5, 10, and 15 days. The 95 % confidence intervals of tube dimensions at each date were compared with the 95 % confidence intervals at day 0. RESULTS: The Covidien ET tube, Rusch PVC NPA, and ssNPA tube lengths and wall thicknesses did not change significantly over 15 days. The Rusch Mediprene NPAs had a statistically significant increase in length starting at day 1 and wall thickness at day 2. CONCLUSIONS: The novel ssNPA did not expand in the in-vitro environment, supporting its safety for extended use. The PVC NPA and ET tube dimensions also remained stable. However, the Rusch Mediprene NPAs had significant length expansion after 1 day of submersion, indicating a considerable risk of expansion during extended use with potential implications for patient care. Silicone and PVC NPA dimensions remained stable when saturated, indicating these materials may be more appropriate for extended use.

Adenotonsillectomy for Snoring and Mild Sleep Apnea in Children: A Randomized Clinical Trial.

Importance: The utility of adenotonsillectomy in children who have habitual snoring without frequent obstructive breathing events (mild sleep-disordered breathing [SDB]) is unknown. Objectives: To evaluate early adenotonsillectomy compared with watchful waiting and supportive care (watchful waiting) on neurodevelopmental, behavioral, health, and polysomnographic outcomes in children with mild SDB. Design, Setting, and Participants: Randomized clinical trial enrolling 459 children aged 3 to 12.9 years with snoring and an obstructive apnea-hypopnea index (AHI) less than 3 enrolled at 7 US academic sleep centers from June 29, 2016, to February 1, 2021, and followed up for 12 months. Intervention: Participants were randomized 1:1 to either early adenotonsillectomy (n = 231) or watchful waiting (n = 228). Main Outcomes and Measures: The 2 primary outcomes were changes from baseline to 12 months for caregiver-reported Behavior Rating Inventory of Executive Function (BRIEF) Global Executive Composite (GEC) T score, a measure of executive function; and a computerized test of attention, the Go/No-go (GNG) test d-prime signal detection score, reflecting the probability of response to target vs nontarget stimuli. Twenty-two secondary outcomes included 12-month changes in neurodevelopmental, behavioral, quality of life, sleep, and health outcomes. Results: Of the 458 participants in the analyzed sample (231 adenotonsillectomy and 237 watchful waiting; mean age, 6.1 years; 230 female [50%]; 123 Black/African American [26.9%]; 75 Hispanic [16.3%]; median AHI, 0.5 [IQR, 0.2-1.1]), 394 children (86%) completed 12-month follow-up visits. There were no statistically significant differences in change from baseline between the 2 groups in executive function (BRIEF GEC T-scores: -3.1 for adenotonsillectomy vs -1.9 for watchful waiting; difference, -0.96 [95% CI, -2.66 to 0.74]) or attention (GNG d-prime scores: 0.2 for adenotonsillectomy vs 0.1 for watchful waiting; difference, 0.05 [95% CI, -0.18 to 0.27]) at 12 months. Behavioral problems, sleepiness, symptoms, and quality of life each improved more with adenotonsillectomy than with watchful waiting. Adenotonsillectomy was associated with a greater 12-month decline in systolic and diastolic blood pressure percentile levels (difference in changes, -9.02 [97% CI, -15.49 to -2.54] and -6.52 [97% CI, -11.59 to -1.45], respectively) and less progression of the AHI to greater than 3 events/h (1.3% of children in the adenotonsillectomy group compared with 13.2% in the watchful waiting group; difference, -11.2% [97% CI, -17.5% to -4.9%]). Six children (2.7%) experienced a serious adverse event associated with adenotonsillectomy. Conclusions: In children with mild SDB, adenotonsillectomy, compared with watchful waiting, did not significantly improve executive function or attention at 12 months. However, children with adenotonsillectomy had improved secondary outcomes, including behavior, symptoms, and quality of life and decreased blood pressure, at 12-month follow-up. Trial Registration: ClinicalTrials.gov Identifier: NCT02562040.

To generate a photonic nanojet outside a high refractive index microsphere illuminated by a Gaussian beam.

A non-resonant, concentrated, narrow beam of light emerging from an illuminated microlens is called a photonic nanojet (PNJ). According to currently prevailing opinion, microspheres and microcylinders are only able to generate a PNJ in their exterior when their refractive index ns (or refractive index contrast) is less than 2. In this Letter we demonstrate that a PNJ can emerge from a microsphere even when ns > 2: first by employing the laws of geometrical optics for a divergent light source; then, by using ray transfer matrix analysis, a mathematical condition for the Gaussian beam (GB) outside the high ns microsphere is derived. The PNJ outside the microsphere with ns = 2.5 is simulated using Generalized Lorenz-Mie theory (GLMT), by using a front focused GB source. The simulated difference between front and back focusing on the dependence of ns is confirmed experimentally by Raman imaging. By opening the PNJ field for high refractive index materials, we believe this work will be a nucleus for new ideas in the field and enable new PNJ applications.

Starting a medical 3D printing lab for otolaryngology-head and neck surgery collaboration.

OBJECTIVE: To evaluate the different strategies for developing and maintaining a 3-dimensional (3D) printing lab. METHODS: We evaluated two printing labs and compared their structure, integration, and production. RESULTS: While one lab was initiated by a clinician and the other by a technical expert, both labs followed a similar series of steps to develop their lab. Each identified a key clinical need, developed a collaborative team, found financial support, and discovered options for sustainability. CONCLUSIONS: While there is no correct path for developing a 3D printing lab, depending on the existing infrastructure and the clinical need, one may choose a certain initial structure for a lab while following a list of common necessary steps.

Multimodal Molecular Imaging and Identification of Bacterial Toxins Causing Mushroom Soft Rot and Cavity Disease.

Soft rot disease of edible mushrooms leads to rapid degeneration of fungal tissue and thus severely affects farming productivity worldwide. The bacterial mushroom pathogen Burkholderia gladioli pv. agaricicola has been identified as the cause. Yet, little is known about the molecular basis of the infection, the spatial distribution and the biological role of antifungal agents and toxins involved in this infectious disease. We combine genome mining, metabolic profiling, MALDI-Imaging and UV Raman spectroscopy, to detect, identify and visualize a complex of chemical mediators and toxins produced by the pathogen during the infection process, including toxoflavin, caryoynencin, and sinapigladioside. Furthermore, targeted gene knockouts and in vitro assays link antifungal agents to prevalent symptoms of soft rot, mushroom browning, and impaired mycelium growth. Comparisons of related pathogenic, mutualistic and environmental Burkholderia spp. indicate that the arsenal of antifungal agents may have paved the way for ancestral bacteria to colonize niches where frequent, antagonistic interactions with fungi occur. Our findings not only demonstrate the power of label-free, in vivo detection of polyyne virulence factors by Raman imaging, but may also inspire new approaches to disease control.

Development and Multidisciplinary Preliminary Validation of a 3-Dimensional-Printed Pediatric Airway Model for Emergency Airway Front-of-Neck Access Procedures.

BACKGROUND: Pediatric-specific difficult airway guidelines include algorithms for 3 scenarios: unanticipated difficult tracheal intubation, difficult mask ventilation, and cannot intubate/cannot ventilate. While rare, these instances may require front-of-neck access (FONA) to secure an airway until a definitive airway can be established. The aim of this study was to develop a pediatric FONA simulator evaluated by both anesthesiology and otolaryngology providers, promoting multidisciplinary airway management. METHODS: A 3-dimensional-printed tracheal model was developed using rescaled, anatomically accurate dimensions from a computerized tomography scan using computer-aided design software. The medical grade silicone model was incorporated into a mannequin to create a low-cost, high-fidelity simulator. A multidisciplinary team of anesthesiology, otolaryngology, and simulation experts refined the model. Experts in airway management were recruited to rate the realism of the model's characteristics and features and their own ability to complete specific FONA-related tasks. RESULTS: Six expert raters (3 anesthesiology and 3 otolaryngology) were identified for multidisciplinary evaluation of model test content validity. Analysis of response data shows null variance within 1 or both specialties for a majority of the content validity tool elements. High and consistent absolute ratings for each domain indicate that the tested experts perceived this trainer as a realistic and highly valuable tool in its current state. CONCLUSIONS: The ability to practice front-of-neck emergency airway procedures safely and subsequently demonstrate proficiency on a child model has great implications regarding both quality of physician training and patient outcomes. This model may be incorporated into curricula to teach needle cricothyroidotomy and other FONA procedures to providers across disciplines.

Fabrication of micro-patterned substrates for plasmonic sensing by piezo-dispensing of colloidal nanoparticles.

In this work we describe a very fast and flexible method for fabrication of plasmon-supporting substrates with micro-patterning capability, which is optimized for plasmonic sensing. We combined a wet chemistry approach to synthesize metallic nanoparticles with a piezo-dispensing system enabling deposition of nanoparticles on the substrates with micrometer precision. In this way, an arbitrary pattern consisting of 200 µm small spots containing plasmonic nanostructures can be produced. Patterns with various nanoparticles exhibiting different plasmonic properties were combined, and the surface density of the particles could be easily varied via their solution concentrations. We showed that under controlled conditions the dispensing process caused no aggregation of the particles and it enabled full transfer of the colloidal solutions onto the substrate. This is an important condition, which enables these substrates to be used for reliable plasmonic sensing based on monitoring the spectral shift of the nanoparticles. We demonstrated the functionality of such substrates by detection of small protein adsorption on the spots based on plasmon label-free sensing method.

Webbed Neck Deformity Reconstruction in Patients with Turner Syndrome: Technical Considerations in Treating Congenital Pterygium Colli.

Importance: Present an excellent outcome for a rare pterygium colli reconstruction. Objective: Establish techniques that have yielded a successful aesthetic and functional outcome for a patient with pterygium colli in a procedure that lacks consensus. Design, Setting, and Participants: Surgical pearls-description of considerations for a successful reconstruction. An academic practice. Pediatric patient with Turner's syndrome who underwent neck and auricular reconstruction.

Pilot Evaluation of Silicone Surrogates for Oral Mucosa Simulation in Craniofacial Surgical Training.

Surgical simulators are crucial in early craniofacial and plastic surgical training, necessitating synthetic materials that accurately replicate tissue properties. Recent critiques of our lab's currently deployed silicone surrogate have highlighted numerous areas for improvement. To further refine our models, our group's objective is to find a composition of materials that is closest in fidelity to native oral mucosa during surgical rehearsal by expert craniofacial surgeons. Fifteen platinum silicone-based surrogate samples were constructed with variable hardness and slacker percentages. These samples underwent evaluation of tactile sensation, hardness, needle puncture, cut resistance, suture retention, defect repair, and tensile elasticity. Expert craniofacial surgeon evaluators provided focused qualitative feedback on selected top-performing samples for further assessment and statistical comparisons. An evaluation revealed surrogate characteristics that were satisfactory and exhibited good performance. Sample 977 exhibited the highest performance, and comparison with the original surrogate (sample 810) demonstrated significant improvements in critical areas, emphasizing the efficacy of the refined composition. The study identified a silicone composition that directly addresses the feedback received by our team's original silicone surrogate. The study underscores the delicate balance between biofidelity and practicality in surgical simulation. The need for ongoing refinement in surrogate materials is evident to optimize training experiences for early surgical learners.

Incorporating a Three-Dimensional Printed Airway into a Pediatric Flexible Bronchoscopy Curriculum.

Background: Although hands-on simulation plays a valuable role in procedural training, there are limited tools available to teach pediatric flexible bronchoscopy (PFB). Fellowship programs rely on patient encounters, with inherent risk, or high-cost virtual reality simulators that may not be widely available and create education inequalities. Objective: Our objective was to study the educational value and transferability of a novel, low-cost, three-dimensional-printed pediatric airway model (3D-AM) for PFB training. Our central hypothesis was that the 3D-AM would have high educational value and would be easily transferrable to learners at different teaching hospitals. Methods: The 3D-AM was designed to teach technical bronchoscopy skills, airway anatomy, airway pathology, and bronchoalveolar lavage (BAL). The curriculum was offered to incoming fellows in pediatric pulmonology, pediatric surgery, and pediatric critical care across three different teaching institutions. After course completion, each participant assessed the simulation model(s) with a 5-point Likert scale across six domains: physical attributes, realism of experience, ability to perform tasks, value, relevance, and global impression. The expert instructors assessed the learners' competency using a modified version of the Bronchoscopy Skills and Tasks Assessment Tool. Results: A total of 14 incoming fellows participated in the course. The mean scores for the 3D-AM across all six domains and across the three institutions was between 4 and 5, suggesting that learners generally had a favorable impression and a similar experience across different institutions. All learners "agreed" or "strongly agreed" that the course was a valuable use of their time, helped teach technical skills and airway anatomy, and would be useful for extra training during fellowship. Most of the learners correctly identified anatomy, bronchomalacia, and performed a BAL. Wall trauma was observed in 36% of learners. Conclusion: The utility, low cost, and transferability of this model may create opportunities for PFB training across different institutions despite resource limitations in the United States and abroad.

Clinical Characteristics of Primary Snoring vs Mild Obstructive Sleep Apnea in Children: Analysis of the Pediatric Adenotonsillectomy for Snoring (PATS) Randomized Clinical Trial.

Importance: It is unknown whether children with primary snoring and children with mild obstructive sleep apnea (OSA) represent populations with substantially different clinical characteristics. Nonetheless, an obstructive apnea-hypopnea index (AHI) of 1 or greater is often used to define OSA and plan for adenotonsillectomy (AT). Objective: To assess whether a combination of clinical characteristics differentiates children with primary snoring from children with mild OSA. Design, Setting, and Participants: Baseline data from the Pediatric Adenotonsillectomy Trial for Snoring (PATS) study, a multicenter, single-blind, randomized clinical trial conducted at 6 academic sleep centers from June 2016 to January 2021, were analyzed. Children aged 3.0 to 12.9 years with polysomnography-diagnosed (AHI <3) mild obstructive sleep-disordered breathing who were considered candidates for AT were included. Data analysis was performed from July 2022 to October 2023. Main Outcomes and Measures: Logistic regression models were fitted to identify which demographic, clinical, and caregiver reports distinguished children with primary snoring (AHI <1; 311 patients [67.8%]) from children with mild OSA (AHI 1-3; 148 patients [32.2%]). Results: A total of 459 children were included. The median (IQR) age was 6.0 (4.0-7.5) years, 230 (50.1%) were female, and 88 (19.2%) had obesity. A total of 121 (26.4%) were Black, 75 (16.4%) were Hispanic, 236 (51.5%) were White, and 26 (5.7%) were other race and ethnicity. Black race (odds ratio [OR], 2.08; 95% CI, 1.32-3.30), obesity (OR, 1.80; 95% CI, 1.12-2.91), and high urinary cotinine levels (>5 µg/L) (OR, 1.88; 95% CI, 1.15-3.06) were associated with greater odds of mild OSA rather than primary snoring. Other demographic characteristics, clinical examination findings, and questionnaire reports did not distinguish between primary snoring and mild OSA. A weighted combination of the statistically significant clinical predictors had limited ability to differentiate children with mild OSA from children with primary snoring. Conclusions and Relevance: In this analysis of baseline data from the PATS randomized clinical trial, primary snoring and mild OSA were difficult to distinguish without polysomnography. Mild OSA vs snoring alone did not identify a clinical group of children who may stand to benefit from AT for obstructive sleep-disordered breathing. Trial Registration: ClinicalTrials.gov Identifier: NCT02562040.

A Validated 3D Printed Laryngeal Suturing Simulator for Endoscopic Laryngeal Cleft Repair.

OBJECTIVES: Endoscopic laryngeal cleft repair (ELCR) with endolaryngeal suturing is an advanced surgical skill. This study objective was to assess the validity of 3-dimensionally (3D) printed laryngeal suturing simulator for ELCR. STUDY DESIGN: Development and validation of a simulator for ELCR. METHODS: An ELCR model was developed using 3D printed and readily available materials. Participants were surveyed before and after a simulation session using five-point Likert scale questions. Performance data was assessed using blinded expert video review and rated using a novel objective structured assessment of technical skills (OSATS) for endoscopic laryngeal suturing. RESULTS: Twenty-one participants ranging from residents to attendings completed the simulation session. Survey respondents reported on a five-point Likert scale that the model was "easy to use" and "quite realistic" (both mean of 4). Confidence improved significantly in 86% of participants (p < 0.01). Overall OSATS scores (out of a total of 55) showed a median improvement in technical skills of 11.7 points (p = 0.004). OSATS demonstrated good intra-rater (κ = 0.689 and 0.677) and moderate inter-rater (κ = 0.573) reliability. Completion times improved from the first to the last suture by a median time of 512 to 350 s (decrease of 202 s, p = 0.002). Participants with no prior ELCR experience improved more than those with in vivo experience. CONCLUSION: This study demonstrates the validity of a simulator utilizing 3D printed larynges for ELCR. A novel OSATS for endoscopic laryngeal suturing was successfully implemented. Confidence, technical skills, and completion times improved with the use of the model across a variety of participants. Laryngoscope, 133:785-791, 2023.

Development of a High-Fidelity, 3D Printed Otoplasty Surgical Simulator.

IMPORTANCE: Prominotia has functional and esthetic impact for the child and family and proficiency in otoplasty requires experiential rehearsal. OBJECTIVES: To design and validate an anatomically accurate, 3D printed prominotia simulator for rehearsal of otoplasties. METHODS: A 3D prominotia model was designed from a computed tomographic (CT) scan and edited in 3-matic software. Negative molds were 3D printed and filled with silicone. Expert surgeons performed an otoplasty procedure on these simulators and provided Likert-based feedback. RESULTS: Six expert surgeons with a mean of 14.3 years of practice evaluated physical qualities, realism, performance, and value of the simulator. The simulator was rated on a scale of 1 (no value) to 5 (great value) and scored 3.83 as a training tool, 3.83 as a competency evaluation tool, and 4 as a rehearsal tool. CONCLUSIONS: Expert validation rated the otoplasty simulator highly in physical qualities, realism, performance, and value. With minor modifications, this model demonstrates valuable educational potential.

Comparison of Caregiver- and Child-Reported Quality of Life in Children With Sleep-Disordered Breathing.

OBJECTIVE: Caregivers frequently report poor quality of life (QOL) in children with sleep-disordered breathing (SDB). Our objective is to assess the correlation between caregiver- and child-reported QOL in children with mild SDB and identify factors associated with differences between caregiver and child report. STUDY DESIGN: Analysis of baseline data from a multi-institutional randomized trial SETTING: Pediatric Adenotonsillectomy Trial for Snoring, where children with mild SDB (obstructive apnea-hypopnea index <3) were randomized to observation or adenotonsillectomy. METHODS: The Pediatric Quality of Life Inventory (PedsQL) assessed baseline global QOL in participating children 5 to 12 years old and their caregivers. Caregiver and child scores were compared. Multivariable regression assessed whether clinical factors were associated with differences between caregiver and child report. RESULTS: PedsQL scores were available for 309 families (mean child age, 7.0 years). The mean caregiver-reported PedsQL score was higher at 75.2 (indicating better QOL) than the mean child-reported score of 67.9 (P < .001). The agreement between caregiver and child total PedsQL scores was poor, with intraclass correlation coefficients of 0.03 (95% CI, -0.09 to 0.15) for children 5 to 7 years old and 0.21 (95% CI, 0.03-0.38) for children 8 to 12 years old. Higher child age and health literacy were associated with closer agreement between caregiver and child report. CONCLUSION: Caregiver- and child-reported global QOL in children with SDB was weakly correlated, more so for young children. In pediatric SDB, child-perceived QOL may be poorer than that reported by caregivers. Further research is needed to assess whether similar trends exist for disease-specific QOL metrics.

Pain management after microtia repair with costal cartilage: De-escalation and opioid use reduction.

OBJECTIVE: Complex and invasive postoperative pain regimens for microtia reconstruction with costal cartilage are often utilized. These generate added costs and invasiveness. We evaluated the effectiveness of a de-escalated pain regimen without use of invasive interventions. METHODS: Case series of patients who underwent stage 1 microtia reconstruction with a modified Nagata/Firmin technique from 2017 to 2020 at a pediatric tertiary care hospital. Patients received intraoperative bupivacaine intercostal blocks and scheduled acetaminophen. Adjunct medications administered and pain scores (Wong-Baker FACES and FLACC-Face, Legs, Activity, Cry, Consolability) at intervals 2-72 h postoperatively were recorded. Narcotic use, peak and median pain scores, and length of stay were compared with published values. RESULTS: Twenty patients were included. Mean age of 12 and length of stay of 2.8 days. Average postoperative FACES scores between 0 and 72 h ranged between 0.7 and 4.0. The average peak pain score was 6.1 (±2.0). FLACC scores were low. Narcotics (0.59 ±0 .35 Morphine Milligram Equivalents/kg) were given to 17 patients. Compared to Shaffer et al. (paravertebral catheter-based infusion), total narcotics use (p = 0.03), peak pain (p = 0.0001), and length of stay (p = 0.001) were less. Compared to Woo et al. (intercostal catheter-based infusion), median pain scores at identical time intervals were lower (p = 0.04). CONCLUSION: Intraoperative intercostal nerve blocks followed by scheduled, weight-based acetaminophen, adjunctive medications (ibuprofen and lidocaine patches), and rescue narcotics are effective in managing pain following microtia repair with autologous costal cartilage. It results in decreased narcotic usage, shorter length of stay, and lower pain scores compared to more complex regimens.

Simulation of laryngotracheal reconstruction with 3D-printed models and porcine cadaveric models.

Objectives: Laryngotracheal reconstruction (LTR) is a complex operation used to treat subglottic stenosis. The use of simulator models is a valuable tool in surgical trainee education, particularly for operations such as LTR that are less common outside high-volume centers. Three-dimensional (3D) printing of the human airway may provide an effective and more accessible alternative to porcine cadaveric models. The objective of this study is to compare the educational value of a 3D-printed model and a porcine cadaveric model as LTR simulation methods. Methods: Simulated LTR procedures were completed by 12 otolaryngology residents and a faculty physician on the cadaveric model and the 3D-printed simulator model. Both models were evaluated by fellowship-trained pediatric otolaryngologists to establish construct validity. Pre-procedure surveys of participants evaluated confidence and attitude toward models and post-procedure surveys evaluated confidence, overall impressions, relevance, content validity, and face validity. Results: Participants reported a similar mean increase in confidence after performing LTR on the 3D-printed model (14%) and cadaveric model (11%). Participants rated both models similarly for utility as an overall training tool and in teaching surgical planning and improving operative techniques. However, participants found the 3D-printed model more useful for teaching anatomy (p = .047). Conclusion: 3D-printed models have practical benefits over cadaveric models; they do not decompose and can be custom made to model a disease state such as subglottic stenosis. Participants reported a similar mean increase in confidence after using either simulation. The 3D-printed model is a promising simulation candidate as it compares well to an animal model and has the advantage of being more anatomically true to pediatric patients.Level of Evidence: Level 2.