RESUMO
The goal of bone tissue engineering is to build artificial bone tissue with properties that closely resemble human bone and thereby support the optimal integration of the constructs (biografts) into the body. The development of tissues in 3D scaffolds includes several complex steps that need to be optimized and monitored. In particular, cell-material interaction during seeding, cell proliferation and cell differentiation within the scaffold pores play a key role. In this work, we seeded two types of 3D-printed scaffolds with pre-osteoblastic MC3T3-E1 cells, proliferated and differentiated the cells, before testing and adapting different assays and imaging methods to monitor these processes. Alpha-TCP/HA (α-TCP with low calcium hydroxyapatite) and baghdadite (Ca3ZrSi2O9) scaffolds were used, which had comparable porosity (~50%) and pore sizes (~300-400 µm). Cell adhesion to both scaffolds showed ~95% seeding efficiency. Cell proliferation tests provided characteristic progression curves over time and increased values for α-TCP/HA. Transmitted light imaging displayed a homogeneous population of scaffold pores and allowed us to track their opening state for the supply of the inner scaffold regions by diffusion. Fluorescence labeling enabled us to image the arrangement and morphology of the cells within the pores. During three weeks of osteogenesis, ALP activity increased sharply in both scaffolds, but was again markedly increased in α-TCP/HA scaffolds. Multiphoton SHG and autofluorescence imaging were used to investigate the distribution, morphology, and arrangement of cells; collagen-I fiber networks; and hydroxyapatite crystals. The collagen-I networks became denser and more structured during osteogenic differentiation and appeared comparable in both scaffolds. However, imaging of the HA crystals showed a different morphology between the two scaffolds and appeared to arrange in the α-TCP/HA scaffolds along collagen-I fibers. ALP activity and SHG imaging indicated a pronounced osteo-inductive effect of baghdadite. This study describes a series of methods, in particular multiphoton imaging and complementary biochemical assays, to validly measure and track the development of bone tissue in 3D scaffolds. The results contribute to the understanding of cell colonization, growth, and differentiation, emphasizing the importance of optimal media supply of the inner scaffold regions.
Assuntos
Osteogênese , Alicerces Teciduais , Humanos , Alicerces Teciduais/química , Diferenciação Celular , Engenharia Tecidual/métodos , Durapatita/farmacologia , Durapatita/química , Colágeno/química , Proliferação de CélulasRESUMO
The lack of complete understanding in the signalling pathways that control the osteogenic differentiation of mesenchymal stem cells hinders their clinical application in the reconstruction of large bone defects and non-union bone fractures. The aim of this study is to gain insight into the interactions of bone morphogenetic protein-2 (BMP-2) and bone biomimetic scaffolds in directing osteogenic differentiation of adipose tissue-derived mesenchymal stem cells (ASCs) and the underlying signalling pathways involved. We demonstrated that bioactive glass nanoparticles (nBG) incorporated polycaprolactone (PCL) coating on hydroxyapatite/ß-tricalcium phosphate (HA/TCP) scaffold exerted a synergistic effect with 3days of BMP-2 treatment in promoting osteogenic gene expression levels (Runx-2, collagen I, osteopontin and bone sialoprotein) and alkaline phosphatase activity in ASCs. Furthermore, we revealed that the synergistic effect was mediated through a mechanism of activating ß1-integrin and induction of Wnt-3a autocrine signalling pathways by nBG incorporated scaffold.
Assuntos
Tecido Adiposo/metabolismo , Proteína Morfogenética Óssea 2/química , Células-Tronco Mesenquimais/citologia , Nanoestruturas/química , Biomimética , Fosfatos de Cálcio/química , Diferenciação Celular , Sobrevivência Celular , Colágeno Tipo I/metabolismo , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Durapatita/química , Perfilação da Expressão Gênica , Vidro/química , Humanos , Integrina beta1/metabolismo , Sialoproteína de Ligação à Integrina/metabolismo , Microscopia Eletrônica de Varredura , Nanomedicina/métodos , Osteoblastos/citologia , Osteogênese , Osteopontina/metabolismo , Poliésteres/química , Transdução de Sinais , Proteína Wnt3A/metabolismoRESUMO
The regenerative function of stem cells is compromised when the proportion of senescent stem cells increases with ageing advance. Therefore, combating stem cell senescence is of great importance for stem cell-based tissue engineering in the elderly, but remains largely unexplored. Osteopontin (OPN), a glycosylated phosphoprotein, is one of the key extracellular matrix molecules in bone tissue. OPN activates various signalling pathways and modulates cellular activities, including cell senescence. However, the role of OPN in stem cell senescence remains largely unknown. This study aims to investigate if OPN modulates cell senescence and bone regenerative function in human adipose-derived mesenchymal stem cells (ASCs), and to determine the underlying mechanisms. We first developed a senescent ASC model using serial passaging until passage 10 (P10), in which senescent cells were characterised by reduced proliferation and osteogenic differentiation capacity compared to P4 ASCs. The conditioned medium from P10 ASCs exhibited a diminished trophic effect on human osteoblasts (HOBs), compared to that from P4 ASCs. P10 ASCs on OPN-coated surface showed rejuvenated phenotype and enhanced osteogenic differentiation. The conditioned medium from P10 ASCs on OPN-coating improved trophic effects on HOBs. OPN regulated the morphology of senescent ASCs, transforming them from a more rounded and flattened cell shape to an elongated shape with a smaller area. These findings demonstrated the effects of OPN in restoring senescent ASCs functions, possibly through a mechanism that involves the modulation of cell morphology, indicating that OPN might hold a great potential for rejuvenating senescent stem cells and could potentially open a new venue for regenerating bone tissue in age-related diseases.
Assuntos
Tecido Adiposo , Regeneração Óssea , Células-Tronco Mesenquimais , Osteogênese , Osteopontina , Humanos , Tecido Adiposo/citologia , Osso e Ossos/citologia , Osso e Ossos/metabolismo , Diferenciação Celular , Proliferação de Células/efeitos dos fármacos , Células Cultivadas , Senescência Celular , Meios de Cultivo Condicionados/farmacologia , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Osteoblastos/metabolismo , Osteoblastos/citologia , Osteogênese/efeitos dos fármacos , Osteopontina/metabolismoRESUMO
The urgency to address skeletal abnormalities and diseases through innovative approaches has led to a significant interdisciplinary convergence of engineering, 3D printing, and design in developing individualised bioceramic bioscaffolds. This review explores into the recent advancements and future trajectory of non-antibiotic antibacterial bioceramics in bone tissue engineering, an importance given the escalating challenges of orthopaedic infections, antibiotic resistance, and emergent pathogens. Initially, the review provides an in-depth exploration of the complex interactions among bacteria, immune cells, and bioceramics in clinical contexts, highlighting the multifaceted nature of infection dynamics, including protein adsorption, immunological responses, bacterial adherence, and endotoxin release. Then, focus on the next-generation bioceramics designed to offer multifunctionality, especially in delivering antibacterial properties independent of traditional antibiotics. A key highlight of this study is the exploration of smart antibacterial bioceramics, marking a revolutionary stride in medical implant technology. The review also aims to guide the ongoing development and clinical adoption of bioceramic materials, focusing on their dual capabilities in promoting bone regeneration and exhibiting antibacterial properties. These next-generation bioceramics represent a paradigm shift in medical implant technology, offering multifunctional benefits that transcend traditional approaches.
RESUMO
Bone has the capacity to regenerate itself for relatively small defects; however, this regenerative capacity is diminished in critical-size bone defects. The development of synthetic materials has risen as a distinct strategy to address this challenge. Effective synthetic materials to have emerged in recent years are bioceramic implants, which are biocompatible and highly bioactive. Yet nothing suitable for the repair of large bone defects has made the transition from laboratory to clinic. The clinical success of bioceramics has been shown to depend not only on the scaffold's intrinsic material properties but also on its internal porous geometry. This study aimed to systematically explore the implications of varying channel size, shape, and curvature in tissue scaffolds on in vivo bone regeneration outcomes. 3D printed bioceramic scaffolds with varying channel sizes (0.3 mm to 1.5 mm), shapes (circular vs rectangular), and curvatures (concave vs convex) were implanted in rabbit femoral defects for 8 weeks, followed by histological evaluation. We demonstrated that circular channel sizes of around 0.9 mm diameter significantly enhanced bone formation, compared to channel with diameters of 0.3 mm and 1.5 mm. Interestingly, varying channel shapes (rectangular vs circular) had no significant effect on the volume of newly formed bone. Furthermore, the present study systematically demonstrated the beneficial effect of concave surfaces on bone tissue growth in vivo, reinforcing previous in silico and in vitro findings. This study demonstrates that optimizing architectural configurations within ceramic scaffolds is crucial in enhancing bone regeneration outcomes. STATEMENT OF SIGNIFICANCE: Despite the explosion of work on developing synthetic scaffolds to repair bone defects, the amount of new bone formed by scaffolds in vivo remains suboptimal. Recent studies have illuminated the pivotal role of scaffolds' internal architecture in osteogenesis. However, these investigations have mostly remained confined to in silico and in vitro experiments. Among the in vivo studies conducted, there has been a lack of systematic analysis of individual architectural features. Herein, we utilized bioceramic 3D printing to conduct a systematic exploration of the effects of channel size, shape, and curvature on bone formation in vivo. Our results demonstrate the significant influence of channel size and curvature on in vivo outcomes. These findings provide invaluable insights into the design of more effective bone scaffolds.
Assuntos
Cerâmica , Osteogênese , Alicerces Teciduais , Impressão Tridimensional , Cerâmica/química , Alicerces Teciduais/química , Alicerces Teciduais/normas , Osteogênese/fisiologia , Animais , Coelhos , Masculino , Propriedades de SuperfícieRESUMO
There is a major medical need for developing novel and effective approaches for repairing non-union and critical-sized bone defects. Although the mechanisms remain to be determined, it is known that inflammation plays a crucial role in initiating bone repair and regeneration. This study investigated the effect of short-term (3 days) preconditioning with tumor necrosis factor-alpha (TNF-α) on proliferation, mobilization, and differentiation of adipose tissue-derived mesenchymal stem cells (ASCs). We demonstrated that TNF-α pre-conditioning increased proliferation, mobilization, and osteogenic differentiation of ASCs and up-regulated bone morphogenetic protein-2 (BMP-2) protein level. BMP-2 silencing by siRNA partially inhibited osteogenic differentiation of ASCs induced by TNF-α; BMP-2 pre-conditioning also significantly increased osteogenic differentiation of ASCs but the effects were significantly smaller than those observed for TNF-α preconditioning. Furthermore, TNF-α treatment promoted extracellular-signal-regulated kinases(Erk)1/2 and p38 mitogen-activated protein kinase (MAPK) signaling pathways, but only Erk1/2 inhibition reduced the BMP-2 levels and osteogenic differentiation induced by TNF-α preconditioning. Together, these results support the hypothesis that inflammation contributes to bone regeneration by promoting proliferation, mobilization, and osteogenic differentiation of ASCs; 3 days of TNF-α preconditioning, mimicking the short boost of inflammation normally occurring after bone injury, might serve as a feasible approach for directing stem cells into osteogenic differentiation.
Assuntos
Tecido Adiposo/citologia , Tecido Adiposo/fisiologia , Regeneração Óssea/fisiologia , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Osteogênese/fisiologia , Fator de Necrose Tumoral alfa/fisiologia , Tecido Adiposo/patologia , Diferenciação Celular/fisiologia , Movimento Celular/fisiologia , Proliferação de Células , Células Cultivadas , Humanos , Inflamação/genética , Inflamação/patologia , Inflamação/fisiopatologia , Sistema de Sinalização das MAP Quinases/fisiologia , Células-Tronco Mesenquimais/fisiologia , Osteogênese/genética , Proteínas Recombinantes/farmacologiaRESUMO
Ceramic scaffolds such as biphasic calcium phosphate (BCP) have been widely studied and used for bone regeneration, but their brittleness and low mechanical strength are major drawbacks. We report the first systematic study on the effect of silk coating in improving the mechanical and biological properties of BCP scaffolds, including (1) optimization of the silk coating process by investigating multiple coatings, and (2) in vitro evaluation of the osteogenic response of human mesenchymal stem cells (hMSCs) on the coated scaffolds. Our results show that multiple silk coatings on BCP ceramic scaffolds can achieve a significant coating effect to approach the mechanical properties of native bone tissue and positively influence osteogenesis by hMSCs over an extended period. The silk coating method developed in this study represents a simple yet effective means of reinforcement that can be applied to other types of ceramic scaffolds with similar microstructure to improve osteogenic outcomes.
Assuntos
Hidroxiapatitas/farmacologia , Células-Tronco Mesenquimais/metabolismo , Osteogênese/efeitos dos fármacos , Seda/farmacologia , Engenharia Tecidual/métodos , Adulto , Fosfatase Alcalina/genética , Regeneração Óssea , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células , Células Cultivadas , Cerâmica/química , Colágeno Tipo I/genética , Expressão Gênica , Gliceraldeído 3-Fosfato Desidrogenase (NADP+)/genética , Humanos , Hidroxiapatitas/química , Sialoproteína de Ligação à Integrina/genética , Masculino , Teste de Materiais , Células-Tronco Mesenquimais/enzimologia , Osteoblastos/citologia , Osteoblastos/fisiologia , Osteogênese/fisiologia , Porosidade , Seda/química , Alicerces TeciduaisRESUMO
The extracellular environment which supports cell life is composed of a hierarchy of maintenance, force and regulatory systems which integrate from the nano- through to macroscale. For this reason, strategies to recreate cell supporting environments have been investigating the use of nanocomposite biomaterials. Here, we review the use of carbon nanotubes as part of a bottom-up approach for use in bone tissue engineering. We evaluate the properties of carbon nanotubes in the context of synthetic tissue substrates and contrast them with the nanoscale features of the extracellular environment. Key studies are evaluated with an emphasis on understanding the mechanisms through which carbon nanotubes interact with biological systems. This includes an examination of how the different properties of carbon nanotubes affect tissue growth, how these properties and variation to them might be leveraged in regenerative tissue therapies and how impurities or contaminates affect their toxicity and biological interaction. FROM THE CLINICAL EDITOR: In this comprehensive review, the authors describe the status and potential applications of carbon nanotubes in bone tissue engineering.
Assuntos
Regeneração Óssea/efeitos dos fármacos , Substitutos Ósseos/uso terapêutico , Osso e Ossos/fisiologia , Nanotubos de Carbono/química , Engenharia Tecidual/métodos , Animais , Substitutos Ósseos/química , Substitutos Ósseos/farmacologia , Osso e Ossos/anatomia & histologia , Osso e Ossos/efeitos dos fármacos , Humanos , Nanotubos de Carbono/toxicidade , Nanotubos de Carbono/ultraestruturaRESUMO
Engineering synthetic hydrogels for the repair and augmentation of load-bearing soft tissues with simultaneously high-water content and mechanical strength is a long-standing challenge. Prior formulations to enhance the strength have involved using chemical crosslinkers where residues remain a risk for implantation or complex processes such as freeze-casting and self-assembly, requiring specialised equipment and technical expertise to manufacture reliably. In this study, we report for the first time that the tensile strength of high-water content (>60 wt.%), biocompatible polyvinyl alcohol hydrogels can exceed 1.0 MPa through a combination of facile manufacturing strategies via physical crosslinking, mechanical drawing, post-fabrication freeze drying, and deliberate hierarchical design. It is anticipated that the findings in this paper can also be used in conjunction with other strategies to enhance the mechanical properties of hydrogel platforms in the design and construction of synthetic grafts for load-bearing soft tissues.
RESUMO
3D printed bone scaffolds have the potential to replace autografts and allografts because of advantages such as unlimited supply and the ability to tailor the scaffolds' biochemical, biological and biophysical properties. Significant progress has been made over the past decade in additive manufacturing techniques to 3D print bone grafts, but challenges remain in the lack of manufacturing techniques that can recapitulate both mechanical and biological functions of native bones. The purpose of this review is to outline the recent progress and challenges of engineering an ideal synthetic bone scaffold and to provide suggestions for overcoming these challenges through bioinspiration, high-resolution 3D printing, and advanced modeling techniques. The article provides a short overview of the progress in developing the 3D printed scaffolds for the repair and regeneration of critical size bone defects. STATEMENT OF SIGNIFICANCE: Treatment of critical size bone defects is still a tremendous clinical challenge. To address this challenge, diverse sets of advanced manufacturing approaches and materials have been developed for bone tissue scaffolds. 3D printing has sparked much interest because it provides a close control over the scaffold's internal architecture and in turn its mechanical and biological properties. This article provides a critical overview of the relationships between material compositions, printing techniques, and properties of the scaffolds and discusses the current technical challenges facing their successful translation to the clinic. Bioinspiration, high-resolution printing, and advanced modeling techniques are discussed as future directions to address the current challenges.
Assuntos
Osso e Ossos , Alicerces Teciduais , Alicerces Teciduais/química , Impressão Tridimensional , Engenharia Tecidual/métodos , Regeneração ÓsseaRESUMO
There is an unmet clinical need for a spinal fusion implant material that recapitulates the biological and mechanical performance of natural bone. We have developed a bioceramic, Sr-HT-Gahnite, which has been identified as a potential fusion device material. This material has the capacity to transform the future of the global interbody devices market, with follow on social, economic, and environmental benefits, rooted in its remarkable combination of mechanical properties and bioactivity. In this study, and in line with FDA requirements, the in vivo preclinical systemic biological safety of a Sr-HT-Gahnite interbody fusion device is assessed over 26 weeks in sheep under good laboratory practice (GLP). Following the in-life phase, animals are assessed for systemic biological effects via blood haematology and clinical biochemistry, strontium dosage analysis in the blood and wool, and histopathology examination of the distant organs including adrenals, brain, heart, kidneys, liver, lungs and bronchi, skeletal muscle, spinal nerves close to the implanted sites, ovaries, and draining lymph nodes. Our results show that no major changes in blood haematology or biochemistry parameters are observed, no systemic distribution of strontium to the blood and wool, and no macroscopic or histopathological abnormalities in the distant organs when Sr-HT-Gahnite was implanted, compared to baseline and control values. Together, these results indicate the systemic safety of the Sr-HT-Gahnite interbody fusion device. The results of this study extend to the systemic safety of other Sr-HT-Gahnite implanted medical devices in contact with bone or tissue, of similar size and manufactured using the described processes. STATEMENT OF SIGNIFICANCE: This paper is considered original and innovative as it is the first that thoroughly reports the systemic biological safety of previously undescribed bioceramic material, Sr-HT-Gahnite. The study has been performed under good laboratory practice, in line with FDA requirements for assessment of a new interbody fusion device, making the results broadly applicable to the translation of sheep models to the human cervical spine; and also the translation of Sr-HT-Gahnite as a biomaterial for use in additional applications. We expect this study to be of broad interest to the readership of Acta Biomaterilia. Its findings are directly applicable to researchers and clinicians working in bone repair and the development of synthetic biomaterials.
Assuntos
Materiais Biocompatíveis , Fusão Vertebral , Humanos , Animais , Ovinos , Materiais Biocompatíveis/química , Próteses e Implantes , Osso e Ossos , Estrôncio/farmacologia , Estrôncio/química , Impressão Tridimensional , Fusão Vertebral/métodosRESUMO
Combating the accumulated senescent cells and the healing of osteoporotic bone fractures in the older remains a significant challenge. Nicotinamide mononucleotide (NMN), a precursor of NAD+, is an excellent candidate for mitigating aging-related disorders. However, it is unknown if NMN can alleviate senescent cell induction and enhance osteoporotic bone fracture healing. Here we show that NMN treatment partially reverses the effects of tumor necrosis factor-alpha (TNF-α) on human primary osteoblasts (HOBs): senescent cell induction, diminished osteogenic differentiation ability, and intracellular NAD+ and NADH levels. Mechanistically, NMN restores the mitochondrial dysfunction in HOBs induced by TNF-α evidenced by increased mitochondrial membrane potential and reduced reactive oxidative species and mitochondrial mass. NMN also increases mitophagy activity by down-regulating P62 expression and up-regulating light chain 3B-II protein expression. In addition, the cell senescence protective effects of NMN on HOBs are mitigated by a mitophagy inhibitor (Bafilomycin A1). In vivo, NMN supplementation attenuates senescent cell induction in growth plates, partially prevents osteoporosis in an ovariectomized mouse model, and accelerates bone healing in osteoporotic mice. We conclude that NMN can be a novel and promising therapeutic candidate to enhance bone fracture healing capacity in the older.
Assuntos
Mononucleotídeo de Nicotinamida , Osteoporose , Camundongos , Humanos , Animais , Mononucleotídeo de Nicotinamida/farmacologia , NAD/metabolismo , Osteogênese , Fator de Necrose Tumoral alfa , Osteoblastos/metabolismoRESUMO
Here we report the first atom probe study to reveal the atomic-scale composition of in vivo bone formed in a bioceramic scaffold (strontium-hardystonite-gahnite) after 12-month implantation in a large bone defect in sheep tibia. The composition of the newly formed bone tissue differs to that of mature cortical bone tissue, and elements from the degrading bioceramic implant, particularly aluminium (Al), are present in both the newly formed bone and in the original mature cortical bone tissue at the perimeter of the bioceramic implant. Atom probe tomography confirmed that the trace elements are released from the bioceramic and are actively transported into the newly formed bone. NanoSIMS mapping, as a complementary technique, confirmed the distribution of the released ions from the bioceramic into the newly formed bone tissue within the scaffold. This study demonstrated the combined benefits of atom probe and nanoSIMS in assessing nanoscopic chemical composition changes at precise locations within the tissue/biomaterial interface. Such information can assist in understanding the interaction of scaffolds with surrounding tissue, hence permitting further iterative improvements to the design and performance of biomedical implants, and ultimately reducing the risk of complications or failure while increasing the rate of tissue formation. STATEMENT OF SIGNIFICANCE: The repair of critical-sized load-bearing bone defects is a challenge, and precisely engineered bioceramic scaffold implants is an emerging potential treatment strategy. However, we still do not understand the effect of the bioceramic scaffold implants on the composition of newly formed bone in vivo and surrounding existing mature bone. This article reports an innovative route to solve this problem, the combined power of atom probe tomography and nanoSIMS is used to spatially define elemental distributions across bioceramic implant sites. We determine the nanoscopic chemical composition changes at the Sr-HT Gahnite bioceramic/bone tissue interface, and importantly, provide the first report of in vivo bone tissue chemical composition formed in a bioceramic scaffold.
Assuntos
Materiais Biocompatíveis , Alicerces Teciduais , Animais , Ovinos , Alicerces Teciduais/química , Materiais Biocompatíveis/química , Osteogênese , Osso e Ossos/diagnóstico por imagem , TomografiaRESUMO
During the final stage of cancer metastasis, tumor cells embed themselves in distant capillary beds, from where they extravasate and establish secondary tumors. Recent findings underscore the pivotal roles of blood/lymphatic flow and shear stress in this intricate tumor extravasation process. Despite the increasing evidence, there is a dearth of systematic and biomechanical methodologies that accurately mimic intricate 3D microtissue interactions within a controlled hydrodynamic microenvironment. Addressing this gap, we introduce an easy-to-operate 3D spheroid-microvasculature-on-a-chip (SMAC) model. Operating under both static and regulated flow conditions, the SMAC model facilitates the replication of the biomechanical interplay between heterogeneous tumor spheroids and endothelium in a quantitative manner. Serving as anin vitromodel for metastasis mechanobiology, our model unveils the phenomena of 3D spheroid-induced endothelial compression and cell-cell junction degradation during tumor migration and expansion. Furthermore, we investigated the influence of shear stress on endothelial orientation, polarization, and tumor spheroid expansion. Collectively, our SMAC model provides a compact, cost-efficient, and adaptable platform for probing the mechanobiology of metastasis.
Assuntos
Neoplasias , Esferoides Celulares , Humanos , Neoplasias/patologia , Microvasos , Endotélio , Dispositivos Lab-On-A-Chip , Microambiente TumoralRESUMO
Multicellular patterning of stem-cell-derived tissue models is commonly achieved via self-organizing activities triggered by exogenous morphogenetic stimuli. However, such tissue models are prone to stochastic behavior, limiting the reproducibility of cellular composition and forming non-physiological architectures. To enhance multicellular patterning in stem cell-derived tissues, a method for creating complex tissue microenvironments endowed with programmable multimodal mechano-chemical cues, including conjugated peptides, proteins, morphogens, and Young's moduli defined over a range of stiffnesses is developed. The ability of these cues to spatially guide tissue patterning processes, including mechanosensing and the biochemically driven differentiation of selected cell types, is demonstrated. By rationally designing niches, the authors engineered a bone-fat assembly from stromal mesenchyme cells and regionalized germ layer tissues from pluripotent stem cells. Through defined niche-material interactions, mechano-chemically microstructured niches enable the spatial programming of tissue patterning processes. Mechano-chemically microstructured cell niches thereby offer an entry point for enhancing the organization and composition of engineered tissues, potentiating structures that better recapitulate their native counterparts.
Assuntos
Células-Tronco Pluripotentes , Engenharia Tecidual , Reprodutibilidade dos Testes , Engenharia Tecidual/métodos , Morfogênese , Osso e OssosRESUMO
A critical strategy for tissue engineering is to provide the signals necessary for tissue regeneration by mimicking the tissue microenvironment. In this study, we mimicked (1) the bone chemical and the physical microenvironment by fabricating a three-dimensional nanocomposite scaffold composed of biphasic calcium phosphates (BCP) coated with a nanocomposite layer of polycaprolactone (PCL) and hydroxyapatite nanoparticles (nHA) (BCP/PCL-nHA)), and (2) the bone's biological microenvironment by co-culturing with primary human osteoblasts (HOBs), and then investigated their effects on osteogenic differentiation of adipose tissue-derived stem cells (ASCs). In comparison with the ASCs cultured alone on BCP scaffolds that were coated only with PCL, early osteogenic differentiation of ASCs was induced by either seeding ASCs on BCP/PCL-nHA scaffolds or by co-culturing with HOBs; the combination of BCP/PCL-nHA scaffold and HOBs resulted in the synergistic enhancement of osteogenic gene expression. Moreover, we found that BCP/PCL-nHA scaffolds induced early osteogenic differentiation of ASCs through integrin-α2 and an extracellular signal-regulated kinase (ERK) signaling pathway. FROM THE CLINICAL EDITOR: The authors mimicked the physico-chemical environment of bone by fabricating a nanocomposite scaffold, and then co-cultured it with human osteoblasts. Demonstrated enhancement of osteogenic gene expression and early osteogenic differentiation of adipose tissue derived stem cells were found using this approach.
Assuntos
Tecido Adiposo/metabolismo , Biomimética , Diferenciação Celular , Células-Tronco Mesenquimais/metabolismo , Nanocompostos , Nanopartículas , Osteogênese , Nicho de Células-Tronco , Tecido Adiposo/ultraestrutura , Técnicas de Cocultura , Durapatita/química , Durapatita/farmacologia , Humanos , Hidroxiapatitas/química , Hidroxiapatitas/farmacologia , Integrina alfa2/metabolismo , Sistema de Sinalização das MAP Quinases , Células-Tronco Mesenquimais/ultraestrutura , Osteoblastos/metabolismo , Osteoblastos/ultraestrutura , Poliésteres/química , Poliésteres/farmacologiaRESUMO
Forming ceramics into rationally-designed and complex shapes without compromising their mechanical properties is a major challenge. Here, we demonstrate self-shaping of ceramics through sequential stereolithographic printing of ceramic resins into components with a heterogeneous concentration of ceramic particles, resulting in well-defined anisotropic shrinkage and, consequently, shape changes during sintering. The method is versatile and scalable and results in well-controlled shape changes in ceramics through bending, folding, twisting, and combinations of these mechanisms. The density measurements and mechanical tests show that the stresses resulting from the self-shaping mechanisms do not significantly affect the physical and mechanical properties of the ceramics. Together with the experiments, we developed a material- and scale-independent mechanical model based on linear elasticity that predicted shape changes accurately. The model can serve as a design tool to guide the selection of particle concentrations to realize the desired shapes in a broad range of ceramics.
Assuntos
Cerâmica , Impressão Tridimensional , Teste de Materiais , Elasticidade , Composição CorporalRESUMO
The tissue engineering approach for repair and regeneration has achieved significant progress over the past decades. However, challenges remain in developing strategies to solve the declined or impaired innate cell and tissue regeneration capacity that occurs with aging. Cellular senescence is a key mechanism underlying organismal aging and is responsible for the declined tissue regeneration capacity in the aging population. Therefore, to promote the diminished tissue regeneration ability in the aged population, it is critical to developing a feasible and promising strategy to target senescent cells. Recent advances in nanomaterials have revolutionized biomedical applications ranging from biosensing to bioimaging and targeted drug delivery. In this perspective, we review and discuss the nature and influences of cell-intrinsic and cell-extrinsic factors on reduced regenerative abilities through aging and how nanotechnology can be a therapeutic avenue to sense, rejuvenate, and eliminate senescent cells, thereby improving the tissue regeneration capacity in the aging population.
Assuntos
Nanoestruturas , Engenharia Tecidual , Sistemas de Liberação de Medicamentos , Nanoestruturas/uso terapêutico , Engenharia Tecidual/métodos , CicatrizaçãoRESUMO
Bioprinting is a promising fabrication technique aimed at developing biologically functional, tissue-like constructs for various biomedical applications. Among the different bioprinting approaches, vat polymerization-based techniques offer the highest feature resolution compared to more commonly used extrusion-based methods and therefore have greater potential to be utilized for printing complex hierarchical tissue architectures. Although significant efforts have been directed toward harnessing digital light processing techniques for high-resolution bioprinting, the use of stereolithography (SLA) setups for producing distinct hydrogel filaments smaller than 20 µm has received less attention. Improving the bioprinting resolution is still a technical challenge that must consider both the practical limitations of the bioprinter apparatus and the formulation of the cytocompatible bioresin. In this study, we developed a novel bioresin compatible with SLA and capable of printing high-resolution features. This resin, composed of a biosynthetic polypeptide poly(l-glutamic acid) functionalized with tyramine moieties (PLGA-Tyr), was crosslinked using a visible-light photoinitiator system. Varying concentrations of PLGA-Tyr and the co-photoinitiator were evaluated for the hydrogel system's gelation ability, swelling characteristics, degradation profiles, mechanical properties, and cell viability post-encapsulation. This study introduces a custom-built, cost-effective, visible-light SLA bioprinting system named the "MicroNC". Using the newly developed visible-light bioresin, we demonstrated for the first time the ability to fabricate hydrogel scaffolds with well-resolved filaments (less than 8 µm in width) capable of supporting cell viability and proliferation and directing cellular morphology at the single-cell level for up to 14 days. Overall, these experiments have underscored the exciting potential of using the visible-light-photoinitiated PLGA-Tyr material system for developing physiologically relevant in vitro hydrogel scaffolds with feature resolutions comparable to the dimensions of individual human cells for a wide range of biomedical applications.
Assuntos
Ácido Glutâmico , Hidrogéis , Humanos , Hidrogéis/química , Impressão Tridimensional , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
ß-Tricalcium phosphate (ß-TCP) has been extensively used in bone tissue engineering in the form of scaffolds, granules, or as reinforcing phase in organic matrices. Solid-state reaction route at high temperatures (>1000 °C) is the most widely used method for the preparation of ß-TCP. The high-temperature synthesis, however, results in the formation of hard agglomerates and fused particles which necessitates postprocessing steps such as milling and sieving operations. This, inadvertently, could lead to introducing unwanted trace elements, promoting particle shape irregularity as well as compromising the biodegradability and bioactivity of ß-TCP because of the solid microstructure of particles. In this study, we introduce a one-pot wet-chemical method at low temperatures (between 160 and 170 °C) to synthesize hollow ß-TCP (hß-TCP) submicron particles of an average size of 300 nm with a uniform rhombohedral shape. We assessed the cytocompatibility of the hß-TCP using primary human osteoblasts (HOB), adipose-derived stem cells (ADSC), and antigen-presenting cells (APCs). We demonstrate the bioactivity of the hß-TCP when cultured with HOB, ADSC, and APCs at a range of particle concentrations (up to 1000 µg/mL) for up to 7 days. hß-TCP significantly enhances osteogenic differentiation of ADSC without the addition of osteogenic supplements. These findings offer a new type of ß-TCP particles prepared at low temperatures, which present various opportunities for developing ß-TCP based biomaterials.