RESUMO
Chiral alkyl chains are ubiquitously observed in organic semiconductor materials and can regulate solution processability and active layer morphology, but the effect of stereoisomers on photovoltaic performance has rarely been investigated. For the racemic Y-type acceptors widely used in organic solar cells, it remains unknown if the individual chiral molecules separate into the conglomerate phase or if racemic phase prevails. Here, the photovoltaic performance of enantiomerically pure Y6 derivatives, (S,S)/(R,R)-BTP-4F, and their chiral mixtures are compared. It is found that (S,S) and (R,R)-BTP-4F molecule in the racemic mixtures tends to interact with its enantiomer. The racemic mixtures enable efficient light harvesting, fast hole transfer, and long polaron lifetime, which is conducive to charge generation and suppresses the recombination losses. Moreover, abundant charge diffusion pathways provided by the racemate contribute to efficient charge transport. As a result, the racemate system maximizes the power output and minimizes losses, leading to a higher efficiency of 18.16% and a reduced energy loss of 0.549 eV, as compared to the enantiomerically pure molecules. This study demonstrates that the chirality of non-fullerene acceptors should receive more attention and be designed rationally to enhance the efficiency of organic solar cells.
RESUMO
Additive engineering is widely utilized to optimize film morphology in active layers of organic solar cells (OSCs). However, the role of additive in film formation and adjustment of film morphology remains unclear at the molecular level. Here, taking high-efficiency Y6-based OSC films as an example, this work thus employs all-atom molecular-dynamics simulations to investigate how introduction of additives with different π-conjugation degree thermodynamically and dynamically impacts nanoscale molecular packings. These results demonstrate that the van der Waals (vdW) interactions of the Y6 end groups with the studied additives are strongest. The larger the π-conjugation degree of the additive molecules, the stronger the vdW interactions between additive and Y6 molecules. Due to such vdW interactions, the π-conjugated additive molecules insert into the neighboring Y6 molecules, thus opening more space for relaxation of Y6 molecules to trigger more ordered packing. Increasing the interactions between the Y6 end groups and the additive molecules not only accelerates formation of the Y6 ordered packing, but also induces shorter Y6-intermolecular distances. This work reveals the fundamental molecular-level mechanism behind film formation and adjustment of film morphology via additive engineering, providing an insight into molecular design of additives toward optimizing morphologies of organic semiconductor films.
RESUMO
Compared to the bulk heterojunction (BHJ) devices, the quasiplanar heterojunction (Q-PHJ) exhibits a more stable morphology and superior charge transfer performance. To achieve both high efficiency and long-term stability, it is necessary to design new materials for Q-PHJ devices. In this study, QxIC-CF3 and QxIC-CH3 are designed and synthesized for the first time. The trifluoromethylation of the central core exerts a modulatory effect on the molecular stacking pattern, leveraging the strong electrostatic potential and intermolecular interactions. Compared with QxIC-CH3, the single crystal structure reveals that QxIC-CF3 exhibits a more compact 2D linear stacking behavior. These benefits, combined with the separated electron and hole transport channels in Q-PHJ device, lead to increased charge mobility and reduced energy loss. The devices based on D18/QxIC-CF3 exhibit an efficiency of 18.1%, which is the highest power conversion efficiency (PCE) for Q-PHJ to date. Additionally, the thermodynamic stability of the active layer morphology enhances the lifespan of the aforementioned devices under illumination conditions. Specifically, the T80 is 420 h, which is nearly twice that of the renowned Y6-based BHJ device (T80 = 220 h). By combining the advantages of the trifluoromethylation and Q-PHJ device, efficient and stable organic solar cell devices can be constructed.
RESUMO
Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC71BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d52) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1 year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening.
RESUMO
Balancing the rigid backbones and flexible side chains of light-harvesting materials is crucially important to reach optimized intermolecular packing, micromorphology, and thus photovoltaic performance of organic solar cells (OSCs). Herein, based on a distinctive CH-series acceptor platform with 2D conjugation extended backbones, a series of nonfullerene acceptors (CH-6F-Cn) are synthesized by delicately tuning the lengths of flexible side chains from n-octyl to n-amyl. A systemic investigation has revealed that the variation of the side chain's length can not only modulate intermolecular packing modes and crystallinity but also dramatically improve the micromorphology of the active layer and eventual photovoltaic parameters of OSCs. Consequently, the highest PCE of 18.73% can be achieved by OSCs employing D18:PM6:CH-6F-C8 as light-harvesting materials.
RESUMO
Urea, as one of the most sustainable organic solutes, denies the high salt consumption in commercial electrolytes with its peculiar solubility in water. The bi-mixture of urea-H2O shows the eutectic feature for increased attention in aqueous Zn-ion electrochemical energy storage (AZEES) technologies. While the state-of-the-art aqueous electrolyte recipes are still pursuing the high-concentrated salt dosage with limited urea adoption and single-anion selection category. Here, a dual-anion urea-based (DAU) electrolyte composed of dual-Zn salts and urea-H2O-induced solutions is reported, contributing to a stable electric double-layer construction and in situ organic/inorganic SEI formation. The optimized ZT2S0.5-20U electrolytes show a high initial Coulombic efficiency of 93.2% and durable Zn-ion storage ≈4000 h regarding Zn//Cu and Zn//Zn stripping/plating procedures. The assembled Zn//activated carbon full cells maintain ≈100% capacitance over 50 000 cycles at 4 A g-1 in coin cell and ≈98% capacitance over 20 000 cycles at 1 A g-1 in pouch cell setups. A 12 × 12 cm2 pouch cell assembly illustrates the practicality of AZEES devices by designing the cheap, antifreezing, and nonflammable DAU electrolyte system coupling proton donor-acceptor molecule and multi-anion selection criteria, exterminating the critical technical barriers in commercialization.
RESUMO
Non-fullerene acceptors (NFAs) significantly enhance photovoltaic performance in organic solar cells (OSCs) using halogenated solvents and additives. However, these solvents are environmentally detrimental and unsuitable for industrial-scale production, and the issue of OSCs' poor long-term stability persists. This report introduces eight asymmetric NFAs (IPCnF-BBO-IC2F, IPCnF-BBO-IC2Cl, IPCnCl-BBO-IC2F, and IPCnCl-BBO-IC2Cl, where n = 1 and 2). These NFAs comprise a 12,13-bis(2-butyloctyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2'',3'':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno-[3,2-b]indole (BBO) core. One end of the core attaches to a mono- or di-halogenated 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) end group (IPC1F, IPC1Cl, IPC2F, or IPC2Cl), while the other end connects to a 2-(5,6-dihalo-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC) end group (IC2F or IC2Cl). The optical and electronic properties of these NFAs can be finely tuned by controlling the number of halogen atoms. Crucially, these NFAs demonstrate excellent compatibility with PM6 even in o-xylene, facilitating the production of additive-free OSCs. The di-halogenated IPC-based NFAs outperform their mono-halogenated counterparts in photovoltaic performance within OSCs. Remarkably, the di-halogenated IPC-based NFAs maintain 94â98% of their initial PCEs over 2000 h in air without encapsulation, indicating superior long-term device stability. These findings imply that the integration of di-halogenated IPCs in asymmetric NFA design offers a promising route to efficient, stable OSCs manufactured through environmentally friendly processes.
RESUMO
The development of electron transport and n-type materials is still largely dominated by a limited number of organic semiconductors, with fullerenes at the forefront. In contrast, substantial progress has been made in developing hole transport and p-type materials. Therefore, expanding the range of electron acceptors, making them solution-processable, and elucidating their structural arrangement by X-ray crystallography is essential. We synthesised 2,2'-bi-(5,6,11,12-tetraazanaphthacene) (bi-TANC) and its triptycene end-capped derivative, 2,2'-bi(8,13-dihydro-8,13-[1,2]benzenonaphtho-5,6,15,16-tetraazanaphthacene) (bi-TpTANC), as electron acceptors. Bi-TANC exhibits a herringbone-like crystal packing with intermolecular π-π overlap, which is observed in typical organic n-type semiconductors. However, it showed poor solubility, similar to larger acenes. In contrast, bi-TpTANC exhibited favourable solubility, and its electrochemistry in solution was investigated. In the cyclic voltammogram of bi-TpTANC, reversible redox waves corresponding to 3-step/4-electron transfer were observed at -0.795â V (1e-), -0.927â V (1e-), and -1.44â V (2e-) as half-wave potentials. The redox wave associated with the two-electron transfer on the negative low-potential side indicates the presence of through-bond charge delocalisation in the monoanionic state. Furthermore, the LUMO level of bi-TpTANC is -4.1â eV, which indicates its potential as a promising air-stable n-type material.
RESUMO
The synthesis and properties of a series of 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) inspired electron acceptors based on thiophene-fused quinone and triptycene motifs is presented. This has yielded insights into structure-property relationships for establishing and modulating simultaneous two-electron reduction processes in TCAQ analogues. These new compounds were synthesised using a Friedel-Crafts acylation between triptycene and thiophene-3,4-dicarbonyl chloride. Isomeric para-quinones featuring a [c]-fused thiophene on one side and a ß,ß- or α,ß-fused triptycene on the other were isolated alongside a thiophene-3,4-diketone which bears two triptycene fragments. Knoevenagel condensation of these products with malononitrile produced a quinoidal bis(dicyanomethylene), an oxo-dicyanomethylene and an acyclic bis(dicyanomethylene). This series of new electron accepting molecules has been studied using X-ray crystallography and the implications of their 3D structures on NMR and UV/vis absorbance spectroscopy and cyclic voltammetry results have been ascertained with conclusions underpinned by computational methods.
RESUMO
Organic π-scaffolds are being envisaged for new-age electron- and ion-responsive materials that can accumulate electrons as well as transport proton. However, such systems are extremely rare as electron-deficient scaffolds are unstable in aqueous solution. Here we detail the synthesis of a water-stable core-naphthalenediimide-nitrobenzyl-viologen based tetra-cation, which accumulates up to eight-electrons within an exceptionally narrow potential window of +0.05 V and -1.12 V. The supramolecular interactions and the ensuing ionic framework are tunable based on the three anions, e.g., Cl-, Br- and PF6-, that are investigated in this work. The ionic framework is formed and supported by a range of H-bonds, in which, the nitro benzyl groups act as pillars connecting the 1D water-tapes and the halide anions. The water molecules are hydrogen-bonded with the halide anions and bestow a facile pathway for the proton conduction, with proton conductivity up to 3.19 x 10-3 S cm-1. In contrast, the ionic assembly formed by the lipophilic PF6- anions do not host the water tapes and consequently the proton conductivity is found to be four orders of magnitude lower. This is a unique example, whereby proton conductivity is realized and is tunable within a highly electron-deficient, eight-electron acceptor, water-stable ionic supramolecular system.
RESUMO
Perovskite nanocrystals (NCs) recently emerged as a suitable candidate for optoelectronic applications because of its simplistic synthesis approach and superior optical properties. For better device performance, the effective absorption of incident photons and the understanding of charge transfer (CT) process are the basic requirements. Herein, we investigate the interfacial charge transfer dynamics of CsPbBr3NCs in the presence of different molecular acceptors; 7,7,8,8-Tetracyanoquinodimethane (TCNQ) and 11,11,12,12 tetracyanonaphtho-2,6-quinodimethane (TCNAQ). The vivid change in CT dynamics at the interfaces of NCs and two different molecular acceptors (TCNQ and TCNAQ) has been observed. The results demonstrate that the ground state complex formation in the presence of TCNQ acts as additional driving force to accelerate the charge transfer between the NCs and molecular acceptor. Moreover, this donor (NCs)-acceptor (TCNQ, TCNAQ) system results in the higher absorption of incident photons. Finally, the photo detector based on CsPbBr3-TCNQ system was fabricated for the first time. The device exhibited a high on-off ratio (104). Furthermore, the CsPbBr3-TCNQ photodetector shows a fast photoresponse times of 180 ms/110 ms (rise/decay time) with a specific detectivity (D*) of 5.2 × 1011Jones. The simple synthesis and outstanding photodetection abilities of this perovskite NCs-molecular acceptor system make them potential candidates for optoelectronic applications.
RESUMO
The advent of nonfullerene acceptors (NFAs) has greatly improved the photovoltaic performance of organic solar cells (OSCs). However, to compete with other solar cell technologies, there is a pressing need for accelerated research and development of improved NFAs as well as their compatible wide bandgap polymer donors. In this study, a novel electron-withdrawing building block, succinimide-substituted thiophene (TS), is utilized for the first time to synthesize three wide bandgap polymer donors: PBDT-TS-C5, PBDT-TSBT-C12, and PBDTF-TSBT-C16. These polymers exhibit complementary bandgaps for efficient sunlight harvesting and suitable frontier energy levels for exciton dissociation when paired with the extensively studied NFA, Y6. Among these donors, PBDTF-TSBT-C16 demonstrates the highest hole mobility and a relatively low highest occupied molecular orbital (HOMO) energy level, attributed to the incorporation of thiophene spacers and electron-withdrawing fluorine substituents. OSC devices based on the blend of PBDTF-TSBT-C16:Y6 achieve the highest power conversion efficiency of 13.21%, with a short circuit current density (Jsc) of 26.83 mA cm-2, an open circuit voltage (Voc) of 0.80 V, and a fill factor of 0.62. Notably, the Voc × Jsc product reaches 21.46 mW cm-2, demonstrating the potential of TS as an electron acceptor building block for the development of high-performance wide bandgap polymer donors in OSCs.
RESUMO
Anchoring an imidazole-di-tert-butyl-arylsilane possessing an azido group to a polystyrene resin provided a heterogeneous precursor that was radiolabeled easily using aqueous [18 F]fluoride. After optimizing the conditions (i.e., using DMSO as solvent and heating at 160°C for 15 min), the desired [18 F]fluorosilane was obtained in 24% radiochemical yield (RCY) and 78% radiochemical purity (RCP) using solid-phase extraction as sole purification. Then, this compound was conjugated by strain-promoted alkyne-azide cycloaddition to a model single-variable domain possessing a cyclooctyne tag, yielding to the desired 18 F-labeled bioconjugate in 2% RCY and >95% RCP after purification by a size exclusion chromatography.
Assuntos
Radioisótopos de Flúor , Halogenação , Radioisótopos de Flúor/química , Alcinos , Compostos Radiofarmacêuticos/química , Imidazóis , Tomografia por Emissão de PósitronsRESUMO
The phrase "Let food be thy medicine " means that food can be a form of medicine and medicine can be a form of food; in other words, that the diet we eat can have a significant impact on our health and well-being. Today, this phrase is gaining prominence as more and more scientific evidence suggests that one's diet can help prevent and treat disease. A diet rich in fruits, vegetables, whole grains, and lean protein can help reduce the risk of heart disease, cancer, diabetes, and other health problems and, on the other hand, a diet rich in processed foods, added sugars, and saturated fats can increase the risk of the same diseases. Electrophilic compounds in the diet can have a significant impact on our health, and they are molecules that covalently modify cysteine residues present in the thiol-rich Keap1 protein. These compounds bind to Keap1 and activate NRF2, which promotes its translocation to the nucleus and its binding to DNA in the ARE region, triggering the antioxidant response and protecting against oxidative stress. These compounds include polyphenols and flavonoids that are nucleophilic but are converted to electrophilic quinones by metabolic enzymes such as polyphenol oxidases (PPOs) and sulfur compounds present in foods such as the Brassica genus (broccoli, cauliflower, cabbage, Brussel sprouts, etc.) and garlic. This review summarizes our current knowledge on this subject.
Assuntos
Antioxidantes , Fator 2 Relacionado a NF-E2 , Humanos , Fator 2 Relacionado a NF-E2/metabolismo , Proteína 1 Associada a ECH Semelhante a Kelch/metabolismo , Antioxidantes/farmacologia , Estresse Oxidativo , DietaRESUMO
This study successfully designed and synthesized two nonfused ring electron acceptors, 412-6F and 412-6Cl, modified with fluorine and chlorine substituents, respectively. Single-crystal analysis revealed that 412-6F possesses a planar molecular backbone and exhibits pronounced dipole-dipole interactions between the fluorine atoms on the lateral phenyl groups and the carbonyl oxygen atoms on the end groups. This specific interaction promotes dense end-group stacking, leading to a reduced interlayer spacing. Improved crystallinity and coherence length are observed in the D18:412-6F blend film. Conversely, 412-6Cl adopts a more distorted configuration and lacks these interactions. As a result, the organic solar cell (OSC) based on D18:412-6F achieved a remarkable power conversion efficiency of 18.03%, surpassing the performance of the D18:412-6Cl OSC. This underscores the importance of designing novel acceptors with beneficial intermolecular interactions to enhance OSC efficiency, thus providing a new direction for organic photovoltaic advancement.
RESUMO
The structure of molecular aggregates is crucial for charge transport and photovoltaic performance in organic solar cells (OSCs). Herein, the intermolecular interactions and aggregated structures of nonfused-ring electron acceptors (NFREAs) are precisely regulated through a halogen transposition strategy, resulting in a noteworthy transformation from a 2D-layered structure to a 3D-interconnected packing network. Based on the 3D electron transport pathway, the binary and ternary devices deliver outstanding power conversion efficiencies (PCEs) of 17.46 % and 18.24 %, respectively, marking the highest value for NFREA-based OSCs.
RESUMO
As the simplest oligomeric acceptors, dimerized acceptors (DAs) are easier to synthesize, and more importantly, they can retain good intermolecular interaction and photovoltaic properties of their parent small-molecule acceptors (SMAs). Nevertheless, currently most efficient DAs are derived from banana-shaped acceptors and they might suffer from inferior device stability with high diffusion coefficients. Herein, we design and synthesize two planar DAs (DMT-FH and DMT-HF) by bridging two linear-shaped M-series SMAs with a thiophene unit. The effects of fluorination position on the diffusion coefficients, power conversion efficiencies (PCEs) and stability of the DAs are systematically studied. Our results suggest that DMT-HF with fluorination on the ending indanone groups shows enhanced intermolecular interactions, improved PCE and stability compared with the counterpart (DMT-FH) with fluorination on the central indanone groups. Further optimization on the DMT-HF-based devices yields an outstanding PCE of 17.17%, which is the highest among all linear-shaped SMA-based DAs. Notably, with the low diffusion coefficient (3.36×10-24 cm2 s-1) of DMT-HF, the resulting device retains over 93% of the initial PCE after 5000 h of continuous heating at 85 oC, suggesting its excellent thermal stability. The results highlight the importance of intermolecular interaction and fluorination for achieving efficient and stable polymer solar cells.
RESUMO
The development of nonfullerene acceptors (NFAs), represented by ITIC, has contributed to improving the power conversion efficiency (PCE) of organic solar cells (OSCs). Although tuning the electronic structures to reduce the exciton binding energy (Eb) is considered to promote photocharge generation, a rational molecular design for NFAs has not been established. In this study, we designed and developed two ITIC-based NFAs bearing spiro-substituted bithiophene or biphenyl units (named SpiroT-DCI and SpiroF-DCI) to tune the frontier molecular orbital (FMO) distribution of NFAs. While the highest occupied molecular orbitals (HOMOs) of SpiroF-DCI and ITIC are delocalized in the main π-conjugated framework, the HOMO of SpiroT-DCI is distributed on the bithiophene unit. Reflecting this difference, SpiroT-DCI exhibits a smaller Eb than either SpiroF-DCI or ITIC, and exhibits greater external quantum efficiency in single-component OSCs. Furthermore, SpiroT-DCI shows improved PCEs for bulk-heterojunction OSCs with a donor of PBDB-T, compared with that of either SpiroT-DCI or ITIC. Time-resolved spectroscopy measurements show that the photo-induced intermolecular charge separation is effective even in pristine SpiroT-DCI films. This study highlights the introduction of spiro-substituted bithiophene units that are effective in tuning the FMOs of ITIC, which is desirable for reducing the Eb and improving the PCE in OSCs.
RESUMO
End-groups halogenation strategies, generally refers to fluorination and chlorination, have been confirmed as simple and efficient methods to regulate the photoelectric performance of non-fullerene acceptors (NFAs), but a controversy over which one is better has existed for a long time. Here, two novel NFAs, C9N3-4F and C9N3-4Cl, featured with different end-groups were successfully synthesized and blended with two renowned donors, D18 and PM6, featured with different electron-withdrawing units. Detailed theoretical calculations and morphology characterizations of the interface structures indicate NFAs based on different end-groups possess different binding energy and miscibility with donors, which shows an obvious influence on phase-separation morphology, charge transport behavior and device performance. After verified by other three pairs of reported NFAs, a universal conclusion obtained as the devices based on D18 with fluorination-end-groups-based NFAs and PM6 with chlorination-end-groups-based NFAs generally show excellent efficiencies, high fill factors and stability. Finally, the devices based on D18: C9N3-4F and PM6: C9N3-4Cl yield outstanding efficiency of 18.53 % and 18.00 %, respectively. Suitably selecting donor and regulating donor/acceptor interface can accurately present the photoelectric conversion ability of a novel NFAs, which points out the way for further molecular design and selection for high-performance and stable organic solar cells.
RESUMO
In the development of high-performance organic solar cells (OSCs), the self-organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side-chain topology in a series of low-cost nonfused-ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA-4, which possesses an asymmetric alkyl side-chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA-4. As a result, the OSC device based on DPA-4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA-based OSCs.