Estimation of Inactivation time for the SARS-CoV-2 virus from the UV biometer in South Korea.

The coronavirus disease 2019 (COVID-19) is a result of the infection by "severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and has caused various social and economic effects over the globe. As the SARS-CoV-2 is effectively inactivated by the exposure to the UV-B radiation (shorter than 315 nm), the exposure time for inactivation of the SARS-CoV-2 was estimated using the broadband UV observation instrument over 11 observation sites in South Korea. For the limitation of the UV biometer, which has limited spectral information, the coefficient for conversion from the erythemal UV (EUV) to the radiation for virus inactivation was adopted before estimating the inactivation time. The inactivation time of SARS-CoV-2 is significantly dependent on seasonal and diurnal variations due to the temporal variations of surface incident UV irradiance. The inactivation times in summer and winter were around 10 and 50 min, respectively. The inactivation time was unidentified during winter afternoons due to the weak spectral UV solar radiation in winter. As the estimation of inactivation time using broadband observation includes the uncertainty due to the conversion coefficient and the error due to the solar irradiance, the sensitivity analysis of the inactivation time estimation was also conducted by changing the UV irradiance.

Standardization of Broadband UV Measurements for 365 nm LED Sources.

Broadband UV measurements are evaluated when UV-A irradiance meters measure optical radiation from 365 nm UV sources. The CIE standardized rectangular-shape UV-A function can be realized only with large spectral mismatch errors. The spectral power-distribution of the 365 nm excitation source is not standardized. Accordingly, the readings made with different types of UV meters, even if they measure the same UV source, can be very different. Available UV detectors and UV meters were measured and evaluated for spectral responsivity. The spectral product of the source-distribution and the meter's spectral-responsivity were calculated for different combinations to estimate broad-band signal-measurement errors. Standardization of both the UV source-distribution and the meter spectral-responsivity is recommended here to perform uniform broad-band measurements with low uncertainty. It is shown what spectral responsivity function(s) is needed for new and existing UV irradiance meters to perform low-uncertainty broadband 365 nm measurements.

Green and Economic Fabrication of Zinc Oxide (ZnO) Nanorods as a Broadband UV Blocker and Antimicrobial Agent.

Zinc oxide (ZnO) nanoparticles have gained widespread interest due to their unique properties, making them suitable for a range of applications. Several methods for their production are available, and of these, controlled synthesis techniques are particularly favourable. Large-scale culturing of Chlorella vulgaris produces secretory carbohydrates as a waste product, which have been shown to play an important role in directing the particle size and morphology of nanoparticles. In this investigation, ZnO nanorods were produced through a controlled synthesis approach using secretory carbohydrates from C. vulgaris, which presents a cost-effective and sustainable alternative to the existing techniques. Fourier transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD) analysis, transmission electron microscopy (TEM), and UV-Vis spectroscopy were used to characterise the nanorods. The prepared nanorods exhibited a broad range of UV absorption, which suggests that the particles are a promising broadband sun blocker and are likely to be effective for the fabrication of sunscreens with protection against both UVB (290-320 nm) and UVA (320-400 nm) radiations. The antimicrobial activity of the prepared nanorods against Gram-positive and Gram-negative bacteria was also assessed. The nanostructures had a crystalline structure and rod-like appearance, with an average length and width of 150 nm and 21 nm, respectively. The nanorods also demonstrated notable antibacterial activity, and 250 µg/mL was determined to be the most effective concentration. The antibacterial properties of the ZnO nanorods suggest its suitability for a range of antimicrobial uses, such as in the food industry and for various biomedical applications.