Early prediction of lung lesion progression in COVID-19 patients with extended CT ventilation imaging.

PURPOSE: In the prediction of COVID-19 disease progression, a clear illustration and early determination of an area that will be affected by pneumonia remain great challenges. In this study, we aimed to predict and visualize the progression of lung lesions in COVID-19 patients in the early stage of illness by using chest CT. METHODS: COVID-19 patients who underwent three chest CT scans in the progressive phase were retrospectively enrolled. An extended CT ventilation imaging (CTVI) method was proposed in this work that was adapted to use two chest CT scans acquired on different days, and then lung ventilation maps were generated. The prediction maps were obtained according to the fractional ventilation values, which were related to pulmonary regional function and tissue property changes. The third CT scan was used to validate whether the prediction maps could be used to distinguish healthy regions and potential lesions. RESULTS: A total of 30 patients (mean age ± SD, 43 ± 10 years, 19 females, and 2-12 days between the second and third CT scans) were included in this study. The predicted lesion locations and sizes were almost the same as the true ones visualized in third CT scan. Quantitatively, the predicted lesion volumes and true lesion volumes showed both a good Pearson correlation (R2 = 0.80; P < 0.001) and good consistency in the Bland-Altman plot (mean bias = 0.04 cm3). Regarding the enlargements of the existing lesions, prediction results also exhibited a good Pearson correlation (R2 = 0.76; P < 0.001) with true lesion enlargements. CONCLUSION: The present findings demonstrated that the extended CTVI method could accurately predict and visualize the progression of lung lesions in COVID-19 patients in the early stage of illness, which is helpful for physicians to predetermine the severity of COVID-19 pneumonia and make effective treatment plans in advance.

Using 4DCT-ventilation to characterize lung function changes for pediatric patients getting thoracic radiotherapy.

PURPOSE: A form of lung functional imaging has been developed that uses 4DCT data to calculate ventilation (4DCT-ventilation). Because 4DCTs are acquired as standard-of-care to manage breathing motion during radiotherapy, 4DCT-ventilation provides functional information at no extra dosimetric or monetary cost. 4DCT-ventilation has yet to be described in children. 4DCT-ventilation can be used as a tool to help assess post-treatment lung function and predict for future clinical thoracic toxicities for pediatric patients receiving radiotherapy to the chest. The purpose of this work was to perform a preliminary evaluation of 4DCT-ventilation-based lung function changes for pediatric patients receiving radiotherapy to the lungs. METHODS: The study used four patients with pre and postradiotherapy 4DCTs. The 4DCTs, deformable image registration, and a density-change-based algorithm were used to compute pre and post-treatment 4DCT-ventilation images. The post-treatment 4DCT-ventilation images were compared to the pretreatment 4DCT-ventilation images for a global lung response and for an intrapatient dose-response (providing an assessment for dose-dependent regional dose-response). RESULTS: For three of the four patients, a global ventilation decline of 7-37% was observed, while one patient did not demonstrate a global functional decline. Dose-response analysis did not reveal an intrapatient dose-response from 0 to 20 Gy for three patients while one patient demonstrated increased 4DCT-ventilation decline as a function of increasing lung doses up to 50 Gy. CONCLUSIONS: Compared to adults, pediatric patients have unique lung function, dosimetric, and toxicity profiles. The presented work is the first to evaluate spatial lung function changes in pediatric patients using 4DCT-ventilation and showed lung function changes for three of the four patients. The early changes demonstrated with lung function imaging warrant further longitudinal work to determine whether the imaging-based early changes can be predicted for long-term clinical toxicity.

A complete 4DCT-ventilation functional avoidance virtual trial: Developing strategies for prospective clinical trials.

INTRODUCTION: 4DCT-ventilation is an exciting new imaging modality that uses 4DCT data to calculate lung-function maps. Because 4DCTs are acquired as standard of care for lung cancer patients undergoing radiotherapy, 4DCT-ventiltation provides functional information at no extra dosimetric or monetary cost to the patient. The development of clinical trials is underway to use 4DCT-ventilation imaging to spare functional lung in patients undergoing radiotherapy. The purpose of this work was to perform a virtual trial using retrospective data to develop the practical aspects of a 4DCT-ventilation functional avoidance clinical trial. METHODS: The study included 96 stage III lung cancer patients. A 4DCT-ventilation map was calculated using the patient's 4DCT-imaging, deformable registration, and a density-change-based algorithm. Clinical trial inclusion assessment used quantitative and qualitative metrics based on the patient's spatial ventilation profile. Clinical and functional plans were generated for 25 patients. The functional plan aimed to reduce dose to functional lung while meeting standard target and critical structure constraints. Standard and dose-function metrics were compared between the clinical and functional plans. RESULTS: Our data showed that 69% and 59% of stage III patients have regional variability in function based on qualitative and quantitative metrics, respectively. Functional planning demonstrated an average reduction of 2.8 Gy (maximum 8.2 Gy) in the mean dose to functional lung. CONCLUSIONS: Our work demonstrated that 60-70% of stage III patients would be eligible for functional planning and that a typical functional lung mean dose reduction of 2.8 Gy can be expected relative to standard clinical plans. These findings provide salient data for the development of functional clinical trials.

A hybrid model- and deep learning-based framework for functional lung image synthesis from multi-inflation CT and hyperpolarized gas MRI.

BACKGROUND: Hyperpolarized gas MRI is a functional lung imaging modality capable of visualizing regional lung ventilation with exceptional detail within a single breath. However, this modality requires specialized equipment and exogenous contrast, which limits widespread clinical adoption. CT ventilation imaging employs various metrics to model regional ventilation from non-contrast CT scans acquired at multiple inflation levels and has demonstrated moderate spatial correlation with hyperpolarized gas MRI. Recently, deep learning (DL)-based methods, utilizing convolutional neural networks (CNNs), have been leveraged for image synthesis applications. Hybrid approaches integrating computational modeling and data-driven methods have been utilized in cases where datasets are limited with the added benefit of maintaining physiological plausibility. PURPOSE: To develop and evaluate a multi-channel DL-based method that combines modeling and data-driven approaches to synthesize hyperpolarized gas MRI lung ventilation scans from multi-inflation, non-contrast CT and quantitatively compare these synthetic ventilation scans to conventional CT ventilation modeling. METHODS: In this study, we propose a hybrid DL configuration that integrates model- and data-driven methods to synthesize hyperpolarized gas MRI lung ventilation scans from a combination of non-contrast, multi-inflation CT and CT ventilation modeling. We used a diverse dataset comprising paired inspiratory and expiratory CT and helium-3 hyperpolarized gas MRI for 47 participants with a range of pulmonary pathologies. We performed six-fold cross-validation on the dataset and evaluated the spatial correlation between the synthetic ventilation and real hyperpolarized gas MRI scans; the proposed hybrid framework was compared to conventional CT ventilation modeling and other non-hybrid DL configurations. Synthetic ventilation scans were evaluated using voxel-wise evaluation metrics such as Spearman's correlation and mean square error (MSE), in addition to clinical biomarkers of lung function such as the ventilated lung percentage (VLP). Furthermore, regional localization of ventilated and defect lung regions was assessed via the Dice similarity coefficient (DSC). RESULTS: We showed that the proposed hybrid framework is capable of accurately replicating ventilation defects seen in the real hyperpolarized gas MRI scans, achieving a voxel-wise Spearman's correlation of 0.57 ± 0.17 and an MSE of 0.017 ± 0.01. The hybrid framework significantly outperformed CT ventilation modeling alone and all other DL configurations using Spearman's correlation. The proposed framework was capable of generating clinically relevant metrics such as the VLP without manual intervention, resulting in a Bland-Altman bias of 3.04%, significantly outperforming CT ventilation modeling. Relative to CT ventilation modeling, the hybrid framework yielded significantly more accurate delineations of ventilated and defect lung regions, achieving a DSC of 0.95 and 0.48 for ventilated and defect regions, respectively. CONCLUSION: The ability to generate realistic synthetic ventilation scans from CT has implications for several clinical applications, including functional lung avoidance radiotherapy and treatment response mapping. CT is an integral part of almost every clinical lung imaging workflow and hence is readily available for most patients; therefore, synthetic ventilation from non-contrast CT can provide patients with wider access to ventilation imaging worldwide.

Mapping lung ventilation through stress maps derived from biomechanical models of the lung.

PURPOSE: Most existing computed tomography (CT)-ventilation imaging techniques are based on deformable image registration (DIR) of different respiratory phases of a four-dimensonal CT (4DCT) scan of the lung, followed by the quantification of local breathing-induced changes in Hounsfield Units (HU) or volume. To date, only moderate correlations have been reported between these CT-ventilation metrics and standard ventilation imaging modalities for adaptive lung radiation therapy. This study evaluates the use of stress maps derived from biomechanical model-based DIR as an alternative CT-ventilation metric. MATERIALS AND METHODS: Six patients treated for lung cancer with conventional radiation therapy were retrospectively analyzed. For each patient, a 4DCT scan and Tc-99m SPECT-V image acquired for treatment planning were collected. Biomechanical model-based DIR was applied between the inhale and exhale phase of the 4DCT scans and stress maps were calculated. The voxel-wise correlation between the reference SPECT-V image and map of the maximum principal stress was measured with a Spearman correlation coefficient. The overlap between high (above the 75th percentile) and low (below the 25th percentile) functioning volumes extracted from the reference SPECT-V and the stress maps was measured with Dice similarity coefficients (DSC). The results were compared to those obtained when using two classical CT-ventilation metrics: the change in HU and Jacobian determinant. RESULTS: The mean Spearman correlation coefficients were: 0.37 ± 18 and 0.39 ± 13 and 0.59 ± 0.13 considering the changes in HU, Jacobian and maximum principal stress, respectively. The corresponding mean DSC coefficients were 0.38 ± 0.09, 0.37 ± 0.07 and 0.52 ± 0.07 for the high ventilation function volumes and 0.48 ± 0.13, 0.44 ± 0.09 and 0.52 ± 0.07 for the low ventilation function volumes. CONCLUSION: For presenting a significantly stronger and more consistent correlation with standard SPECT-V images than previously proposed CT-ventilation metrics, stress maps derived with the proposed method appear to be a promising tool for incorporation into functional lung avoidance strategies.

A prospective study to validate pulmonary blood mass changes on non-contrast 4DCT in pulmonary embolism patients.

PURPOSE: Limited diagnostic options exist for patients with suspected pulmonary embolism (PE) who cannot undergo CT-angiogram (CTA). CT-ventilation methods recover respiratory motion-induced lung volume changes as a surrogate for ventilation. We recently demonstrated that pulmonary blood mass change, induced by tidal respiratory motion, is a potential surrogate for pulmonary perfusion. In this study, we examine blood mass and volume change in patients with PE and parenchymal lung abnormalities (PLA). METHODS: A cross-sectional analysis was conducted on a prospective, cohort-study with 129 consecutive PE suspected patients. Patients received 4DCT within 48 h of CTA and were classified as having PLA and/or PE. Global volume change (VC) and percent global pulmonary blood mass change (PBM) were calculated for each patient. Associations with disease type were evaluated using quantile regression. RESULTS: 68 of 129 patients were PE positive on CTA. Median change in PBM for PE-positive patients (0.056; 95% CI: 0.045, 0.068; IQR: 0.051) was smaller than that of PE-negative patients (0.077; 95% CI: 0.064, 0.089; IQR: 0.056), with an estimated difference of 0.021 (95% CI: 0.003, 0.038; p = 0.0190). PLA was detected in 57 (44.2%) patients. Median VC for PLA-positive patients (1.26; 95% CI: 1.22, 1.30; IQR: 0.15) showed no significant difference from PLA-negative VC (1.25; 95% CI: 1.21, 1.28; IQR: 0.15). CONCLUSIONS: We demonstrate that pulmonary blood mass change is significantly lower in PE-positive patients compared to PE-negative patients, indicating that PBM derived from dynamic non-contrast CT is a potentially useful surrogate for pulmonary perfusion.

Pulmonary embolism in COVID-19: Ventilation and perfusion computed tomography.

This is an illustrated case about CT ventilation and perfusion in Covid patient.

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom.

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VICBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom. The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VICBCT- and 4D-CT-based ventilation images (VICT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VICBCT. Correlations between the VICBCT and VICT values were evaluated using voxel-wise Spearman's rank correlation coefficient (r). In case of both metrics, the Jacobian-based VICBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VICBCT was greater or equal to that of the HU-based VICBCT. In addition, the ventilation accuracy of VICBCT increased at low gantry speeds. Thus, the image quality of VICBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VICBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VICBCT imaging into the functional avoidance planning process.

The VAMPIRE challenge: A multi-institutional validation study of CT ventilation imaging.

PURPOSE: CT ventilation imaging (CTVI) is being used to achieve functional avoidance lung cancer radiation therapy in three clinical trials (NCT02528942, NCT02308709, NCT02843568). To address the need for common CTVI validation tools, we have built the Ventilation And Medical Pulmonary Image Registration Evaluation (VAMPIRE) Dataset, and present the results of the first VAMPIRE Challenge to compare relative ventilation distributions between different CTVI algorithms and other established ventilation imaging modalities. METHODS: The VAMPIRE Dataset includes 50 pairs of 4DCT scans and corresponding clinical or experimental ventilation scans, referred to as reference ventilation images (RefVIs). The dataset includes 25 humans imaged with Galligas 4DPET/CT, 21 humans imaged with DTPA-SPECT, and 4 sheep imaged with Xenon-CT. For the VAMPIRE Challenge, 16 subjects were allocated to a training group (with RefVI provided) and 34 subjects were allocated to a validation group (with RefVI blinded). Seven research groups downloaded the Challenge dataset and uploaded CTVIs based on deformable image registration (DIR) between the 4DCT inhale/exhale phases. Participants used DIR methods broadly classified into B-splines, Free-form, Diffeomorphisms, or Biomechanical modeling, with CT ventilation metrics based on the DIR evaluation of volume change, Hounsfield Unit change, or various hybrid approaches. All CTVIs were evaluated against the corresponding RefVI using the voxel-wise Spearman coefficient rS , and Dice similarity coefficients evaluated for low function lung ( DSClow ) and high function lung ( DSChigh ). RESULTS: A total of 37 unique combinations of DIR method and CT ventilation metric were either submitted by participants directly or derived from participant-submitted DIR motion fields using the in-house software, VESPIR. The rS and DSC results reveal a high degree of inter-algorithm and intersubject variability among the validation subjects, with algorithm rankings changing by up to ten positions depending on the choice of evaluation metric. The algorithm with the highest overall cross-modality correlations used a biomechanical model-based DIR with a hybrid ventilation metric, achieving a median (range) of 0.49 (0.27-0.73) for rS , 0.52 (0.36-0.67) for DSClow , and 0.45 (0.28-0.62) for DSChigh . All other algorithms exhibited at least one negative rS value, and/or one DSC value less than 0.5. CONCLUSIONS: The VAMPIRE Challenge results demonstrate that the cross-modality correlation between CTVIs and the RefVIs varies not only with the choice of CTVI algorithm but also with the choice of RefVI modality, imaging subject, and the evaluation metric used to compare relative ventilation distributions. This variability may arise from the fact that each of the different CTVI algorithms and RefVI modalities provides a distinct physiologic measurement. Ultimately this variability, coupled with the lack of a "gold standard," highlights the ongoing importance of further validation studies before CTVI can be widely translated from academic centers to the clinic. It is hoped that the information gleaned from the VAMPIRE Challenge can help inform future validation efforts.

CT ventilation imaging derived from breath hold CT exhibits good regional accuracy with Galligas PET.

BACKGROUND AND PURPOSE: CT ventilation imaging (CTVI) derived from four dimensional CT (4DCT) has shown only moderate spatial accuracy in humans due to 4DCT image artefacts. Here we assess the accuracy of an improved CTVI using high quality exhale/inhale breath-hold CT (BHCT). MATERIALS AND METHODS: Eighteen lung cancer patients underwent exhale/inhale BHCT, 4DCT and Galligas PET ventilation scans in a single imaging session. For each BHCT and 4DCT scan, we performed deformable image registration (DIR) between the inhale and exhale phase images to quantify ventilation using three published metrics: (i) breathing induced lung density change, CTVIDIR-HU (ii) breathing induced volume change CTVIDIR-Jac and (iii) the regional air-tissue product, CTVIHU Spatial accuracy was reported as the voxel-wise Spearman correlation r between CTVI and Galligas PET. RESULTS: For BHCT-based CTVIs (N = 16), the CTVIDIR-HU, CTVIDIR-Jac and CTVIHU methods yielded mean (range) r values of 0.67 (0.52-0.87), 0.57 (0.18-0.77) and 0.49 (0.14-0.75) respectively. By comparison the 4DCT-based CTVIs (n = 14) had values of 0.32 (-0.04 to 0.51), 0.16 (-0.31 to 44) and 0.49 (0.20-0.77) respectively. CONCLUSIONS: High quality CT imaging is a key requirement for accurate CT ventilation imaging. The use of exhale/inhale BHCT can improve the accuracy of CTVI for human subjects.

Evaluation of functionally weighted dose-volume parameters for thoracic stereotactic ablative radiotherapy (SABR) using CT ventilation.

For the purpose of reducing radiation pneumontisis (RP), four-dimensional CT (4DCT)-based ventilation can be used to reduce functionally weighted lung dose. This study aimed to evaluate the functionally weighted dose-volume parameters and to investigate an optimal weighting method to realize effective planning optimization in thoracic stereotactic ablative radiotherapy (SABR). Forty patients treated with SABR were analyzed. Ventilation images were obtained from 4DCT using deformable registration and Hounsfield unit-based calculation. Functionally-weighted mean lung dose (fMLD) and functional lung fraction receiving at least x Gy (fVx) were calculated by two weighting methods: thresholding and linear weighting. Various ventilation thresholds (5th-95th, every 5th percentile) were tested. The predictive accuracy for CTCAE grade ≧ 2 pneumonitis was evaluated by area under the curve (AUC) of receiver operating characteristic analysis. AUC values varied from 0.459 to 0.570 in accordance with threshold and dose-volume metrics. A combination of 25th percentile threshold and fV30 showed the best result (AUC: 0.570). AUC values with fMLD, fV10, fV20, and fV40 were 0.541, 0.487, 0.548 and 0.563 using a 25th percentile threshold. Although conventional MLD, V10, V20, V30 and V40 showed lower AUC values (0.516, 0.477, 0.534, 0.552 and 0.527), the differences were not statistically significant. fV30 with 25th percentile threshold was the best predictor of RP. Our results suggested that the appropriate weighting should be used for better treatment outcomes in thoracic SABR.

Dosimetric feasibility of 4DCT-ventilation imaging guided proton therapy for locally advanced non-small-cell lung cancer.

BACKGROUND: The principle aim of this study is to incorporate 4DCT ventilation imaging into functional treatment planning that preserves high-functioning lung with both double scattering and scanning beam techniques in proton therapy. METHODS: Eight patients with locally advanced non-small-cell lung cancer were included in this study. Deformable image registration was performed for each patient on their planning 4DCTs and the resultant displacement vector field with Jacobian analysis was used to identify the high-, medium- and low-functional lung regions. Five plans were designed for each patient: a regular photon IMRT vs. anatomic proton plans without consideration of functional ventilation information using double scattering proton therapy (DSPT) and intensity modulated proton therapy (IMPT) vs. functional proton plans with avoidance of high-functional lung using both DSPT and IMPT. Dosimetric parameters were compared in terms of tumor coverage, plan heterogeneity, and avoidance of normal tissues. RESULTS: Our results showed that both DSPT and IMPT plans gave superior dose advantage to photon IMRTs in sparing low dose regions of the total lung in terms of V5 (volume receiving 5Gy). The functional DSPT only showed marginal benefit in sparing high-functioning lung in terms of V5 or V20 (volume receiving 20Gy) compared to anatomical plans. Yet, the functional planning in IMPT delivery, can further reduce the low dose in high-functioning lung without degrading the PTV dosimetric coverages, compared to anatomical proton planning. Although the doses to some critical organs might increase during functional planning, the necessary constraints were all met. CONCLUSIONS: Incorporating 4DCT ventilation imaging into functional proton therapy is feasible. The functional proton plans, in intensity modulated proton delivery, are effective to further preserve high-functioning lung regions without degrading the PTV coverage.

Assessing the use of 4DCT-ventilation in pre-operative surgical lung cancer evaluation.

PURPOSE: A primary treatment option for lung cancer patients is surgical resection. Patients who have poor lung function prior to surgery are at increased risk of developing serious and life-threatening complications after surgical resection. Surgeons use nuclear medicine ventilation-perfusion (VQ) scans along with pulmonary function test (PFT) information to assess a patient's pre-surgical lung function. The nuclear medicine images and pre-surgery PFTs are used to calculate percent predicted postoperative (%PPO) PFT values by estimating the amount of functioning lung tissue that would be lost with surgical resection. Nuclear medicine imaging is currently considered the standard of care when evaluating the amount of ventilation that would be lost due to surgery. A novel lung function imaging modality has been developed in radiation oncology that uses 4-Dimensional computed tomography data to calculate ventilation maps (4DCT-ventilation). Compared to nuclear medicine, 4DCT-ventilation is cheaper, does not require a radioactive contrast agent, provides a faster imaging procedure, and has improved spatial resolution. In this work we perform a retrospective study to assess the use of 4DCT-ventilation as a pre-operative surgical lung function evaluation tool. Specifically, the purpose of our study was to compare %PPO PFT values calculated with 4DCT-ventilation and %PPO PFT values calculated with nuclear medicine ventilation-perfusion imaging. METHODS: The study included 16 lung cancer patients that had undergone 4DCT imaging, nuclear medicine imaging, and had Forced Expiratory Volume in 1 second (FEV1 ) acquired as part of a standard PFT. The 4DCT datasets, spatial registration, and a density-change-based model were used to compute 4DCT-ventilation maps. Both 4DCT-ventilation and nuclear medicine images were used to calculate %PPO FEV1 . The %PPO FEV1 was calculated by scaling the pre-surgical FEV1 by (1-fraction of total resected ventilation); where the resected ventilation was determined using either the 4DCT-ventilation or nuclear medicine imaging. Calculations were done assuming both lobectomy and pneumonectomy resections. The %PPO FEV1 values were compared between the 4DCT-ventilation-based calculations and the nuclear medicine-based calculations using correlation coefficients, average differences, and Receiver Operating Characteristic (ROC) analysis. RESULTS: Overall the 4DCT-ventilation derived %PPO FEV1 values agreed well with nuclear medicine-derived %PPO FEV1 data with correlations of 0.99 and 0.81 for lobectomy and pneumonectomy, respectively. The average differences between the 4DCT-ventilation and nuclear medicine-based calculation for %PPO FEV1 were less than 5%. ROC analysis revealed predictive accuracy that ranged from 87.5% to 100% when assessing the ability of 4DCT-ventilation to predict for nuclear medicine-based %PPO FEV1 values. CONCLUSIONS: 4DCT-ventilation is an innovative technology developed in radiation oncology that has great potential to translate to the surgical domain. The high correlation results when comparing 4DCT-ventilation to the current standard of care provide a strong rationale for a prospective clinical trial assessing 4DCT-ventilation in the clinical setting. 4DCT-ventilation can reduce the cost and imaging time for patients while providing improved spatial accuracy and quantitative results for surgeons.

Evaluating the accuracy of 4D-CT ventilation imaging: First comparison with Technegas SPECT ventilation.

PURPOSE: Computed tomography ventilation imaging (CTVI) is a highly accessible functional lung imaging modality that can unlock the potential for functional avoidance in lung cancer radiation therapy. Previous attempts to validate CTVI against clinical ventilation single-photon emission computed tomography (V-SPECT) have been hindered by radioaerosol clumping artifacts. This work builds on those studies by performing the first comparison of CTVI with 99m Tc-carbon ('Technegas'), a clinical V-SPECT modality featuring smaller radioaerosol particles with less clumping. METHODS: Eleven lung cancer radiotherapy patients with early stage (T1/T2N0) disease received treatment planning four-dimensional CT (4DCT) scans paired with Technegas V/Q-SPECT/CT. For each patient, we applied three different CTVI methods. Two of these used deformable image registration (DIR) to quantify breathing-induced lung density changes (CTVIDIR-HU ), or breathing-induced lung volume changes (CTVIDIR-Jac ) between the 4DCT exhale/inhale phases. A third method calculated the regional product of air-tissue densities (CTVIHU ) and did not involve DIR. Corresponding CTVI and V-SPECT scans were compared using the Dice similarity coefficient (DSC) for functional defect and nondefect regions, as well as the Spearman's correlation r computed over the whole lung. The DIR target registration error (TRE) was quantified using both manual and computer-selected anatomic landmarks. RESULTS: Interestingly, the overall best performing method (CTVIHU ) did not involve DIR. For nondefect regions, the CTVIHU , CTVIDIR-HU , and CTVIDIR-Jac methods achieved mean DSC values of 0.69, 0.68, and 0.54, respectively. For defect regions, the respective DSC values were moderate: 0.39, 0.33, and 0.44. The Spearman r-values were generally weak: 0.26 for CTVIHU , 0.18 for CTVIDIR-HU , and -0.02 for CTVIDIR-Jac . The spatial accuracy of CTVI was not significantly correlated with TRE, however the DIR accuracy itself was poor with TRE > 3.6 mm on average, potentially indicative of poor quality 4DCT. Q-SPECT scans achieved good correlations with V-SPECT (mean r > 0.6), suggesting that the image quality of Technegas V-SPECT was not a limiting factor in this study. CONCLUSIONS: We performed a validation of CTVI using clinically available 4DCT and Technegas V/Q-SPECT for 11 lung cancer patients. The results reinforce earlier findings that the spatial accuracy of CTVI exhibits significant interpatient and intermethod variability. We propose that the most likely factor affecting CTVI accuracy was poor image quality of clinical 4DCT.

Measurement of preoperative lobar lung function with computed tomography ventilation imaging: progress towards rapid stratification of lung cancer lobectomy patients with abnormal lung function.

OBJECTIVES: In lung cancer preoperative evaluation, functional lung imaging is commonly used to assess lobar function. Computed tomography ventilation (CT-V) imaging is an emerging lung function imaging modality. We compared CT-V imaging assessment of lobar function and its prediction of postoperative lung function to that achieved by (i) positron emission tomography ventilation (PET-V) imaging and (ii) the standard anatomical segment counting (ASC) method. We hypothesized (i) that CT-V and PET-V have similar relative lobar function and (ii) that functional imaging and anatomic assessment (ASC) yield different predicted postoperative (ppo) lung function and therefore could change clinical management. METHODS: In this proof-of-concept study, 11 patients were subjected to pulmonary function tests, CT-V and PET-V imaging. The Bland-Altman plot, Pearson's correlation and linear regression analysis were used to assess the agreement between the CT-V-, PET-V- and ASC-based quantification of lobar function and in the ppo lung function. RESULTS: CT-V and PET-V imaging demonstrated strong correlations in quantifying relative lobar function (r = 0.96; P < 0.001). A Wilcoxon-signed rank test showed no significant difference in the lobar function estimates between the two imaging modalities (P = 0.83). The Bland-Altman plot also showed no significant differences. The correlation between ASC-based lobar function estimates with ventilation imaging was low, r < 0.45; however, the predictions of postoperative lung function correlated strongly between all three methods. CONCLUSIONS: The assessment of lobar function from CT-V imaging correlated strongly with PET-V imaging, but had low correlations with ASC. CT-V imaging may be a useful alternative method in preoperative evaluation for lung cancer patients.

Evaluation of four-dimensional computed tomography (4D-CT)-based pulmonary ventilation: The high correlation between 4D-CT ventilation and (81m)Kr-planar images was found.

PURPOSE: To evaluate four-dimensional computed tomography (4D-CT)-derived pulmonary ventilation by comparing with (81m)Kr-gas ventilation (VRI). We also proposed two methods to improve the functional accuracy of 4D-CT ventilation images and evaluated these methods. METHODS AND MATERIALS: Eleven lung cancer patients with 4D-CT and VRI were analyzed. Hounsfield unit-based (VHU) and a Jacobian-based (VJac) 4D-CT ventilation images were calculated. They were evaluated by voxel-by-voxel spearman's rank correlation coefficient (r) between 4D-CT ventilation and VRI images. After applying an averaging ventilation method and a slope calculating method, correlations were also calculated. RESULTS: 4D-CT ventilation showed the high correlation to VRI (r=0.875 with VHU). An averaging method brought significantly higher (p=0.012) correlations to nuclear medicine images with VHU. The improvement was not significant (p=0.619) with VJac. Slope calculating method improved the correlation with VHU and slightly worsened the correlation with VJac. CONCLUSIONS: The averaging method we proposed might be useful to improve 4D-CT ventilation images. We found good agreement between 4D-CT ventilation and nuclear medicine ventilation, indicating the high physiologic accuracy of 4D-CT ventilation.

Functional Image-guided Radiotherapy Planning for Normal Lung Avoidance.

For patients with lung cancer undergoing curative intent radiotherapy, functional lung imaging can be incorporated into treatment planning to modify the dose distribution within non-target volume lung by differentiation of lung regions that are functionally defective or viable. This concept of functional image-guided lung avoidance treatment planning has been investigated with several imaging modalities, primarily single photon emission computed tomography (SPECT), but also hyperpolarised gas magnetic resonance (MR) imaging, positron emission tomography (PET) and computed tomography (CT)-based measures of lung biomechanics. Here, we review the application of each of these modalities, review practical issues of lung avoidance implementation, including image registration and the role of both ventilation and perfusion imaging, and provide guidelines for reporting of future lung avoidance planning studies.

Lung Contusion: A Clinico-Pathological Entity with Unpredictable Clinical Course.

Lung contusion is an entity involving injury to the alveolar capillaries, without any tear or cut in the lung tissue. This results in accumulation of blood and other fluids within the lung tissue. The excess fluid interferes with gas exchange leading to hypoxia. The pathophysiology of lung contusion includes ventilation/perfusion mismatching, increased intrapulmonary shunting, increased lung water, segmental lung damage, and a loss of compliance. Clinically, patient's presents with hypoxiemia, hypercarbia and increase in laboured breathing. Patients are treated with supplemental oxygen and mechanical ventilation whenever indicated. Treatment is primarily supportive. Computed tomography (CT) is very sensitive for diagnosing pulmonary contusion. Pulmonary contusion occurs in 25-35% of all blunt chest traumas.