Innovative High Gas Pressure Microscopy Chamber Designed for Biological Cell Observation.

An original high-pressure microscopy chamber has been designed for real-time visualization of biological cell growth during high isostatic (gas or liquid) pressure treatments up to 200 MPa. This new system is highly flexible allowing cell visualization under a wide range of pressure levels as the thickness and the material of the observation window can be easily adapted. Moreover, the design of the observation area allows different microscope objectives to be used as close as possible to the observation window. This chamber can also be temperature controlled. In this study, the resistance and optical properties of this new high-pressure chamber have been tested and characterized. The use of this new chamber was illustrated by a real-time study of the growth of two different yeast strains - Saccharomyces cerevisiae and Candida viswanathii - under high isostatic gas pressure (30 or 20 MPa, respectively). Using image analysis software, we determined the evolution of the area of colonies as a function of time, and thus calculated colony expansion rates.

Noninvasive imaging of rat-derived microglia and its reactivity to inflammatory molecules via acoustic impedance microscopy.

PURPOSE: Microglia, the brain's immune cells, play important roles in neuronal differentiation, survival, and death. The function of microglia is deeply related to the morphologies; however, it is too complex to observe conventionally and identify the condition of living microglia using optical microscopes. Herein, we proposed a new method to observe living cultured microglia and their reactivity to inflammation via the acoustic impedance mode of a scanning acoustic microscope. METHODS: Primary cultured microglia collected from rat pups exposed to acetamiprid, an insecticide, in utero were observed with both acoustic interface impedance mode (C-mode) and transparent three-dimensional impedance mode (B-mode). RESULTS: We characterized microglia into four types based on the results obtained from acoustic impedance, cytoskeletal information, and laser confocal imaging. Biphasic acoustic observation using B-mode and C-mode gave us information regarding the dynamic morphologies of living microglia treated with adenosine triphosphate (ATP) (600 µmol/L), which reflects distress signals from inflamed neurons. Acetamiprid exposure induced microglia response even in the neonatal period. ATP stimulus altered the shape and thickness of microglia with a change in the bulk modulus of the cell. Three-dimensional alteration with ATP stimulus could be observed only after biphasic acoustic observation using B-mode and C-mode. This acoustic observation was consistent with confocal observation using anti-Iba-1 and P2Y12 immunocytochemistry. CONCLUSION: This study demonstrated the adequacy of using a scanning acoustic microscope in analyzing microglia's shape, motility, and response to inflammation.

Experimental Considerations for the Evaluation of Viral Biomolecular Condensates.

Biomolecular condensates are nonmembrane-bound assemblies of biological polymers such as protein and nucleic acids. An increasingly accepted paradigm across the viral tree of life is (a) that viruses form biomolecular condensates and (b) that the formation is required for the virus. Condensates can promote viral replication by promoting packaging, genome compaction, membrane bending, and co-opting of host translation. This review is primarily concerned with exploring methodologies for assessing virally encoded biomolecular condensates. The goal of this review is to provide an experimental framework for virologists to consider when designing experiments to (a) identify viral condensates and their components, (b) reconstitute condensation cell free from minimal components, (c) ask questions about what conditions lead to condensation, (d) map these questions back to the viral life cycle, and (e) design and test inhibitors/modulators of condensation as potential therapeutics. This experimental framework attempts to integrate virology, cell biology, and biochemistry approaches.

Time and frequency domain deconvolution for cross-sectional cultured cell observation using an acoustic impedance microscope.

Herein, we propose a method to estimate the reflection coefficient of the ultrasonic wave transmitted onto an object and to display this with acoustic impedance distribution. The observation targets were glial cells, which have a rigid cytoskeleton and spread out well on a culture substrate. A reflection coefficient derived only from the cells was then obtained using a deconvolution process. In the conventional method, the deconvolution process that was performed only in the frequency domain would cause an error in the reconstructed signal, and it formed an artifact when the result was converted into the acoustic impedance image. To solve this problem, two types of deconvolution techniques were applied in either the full frequency or time-frequency domain. The results of both methods were then compared. Since the characteristic acoustic impedance is a physical property substantially equivalent to the bulk modulus, it can be considered that the internal elastic parameter is thus estimated. An analysis of the nucleus based on its position in the acoustic impedance image was then performed. The results indicated that the proposed time-frequency domain deconvolution method is able to maintain the structure of the cell, while the cell itself is free from unwanted artifacts. The nucleus was also estimated to be located toward the center of the cell, with lower acoustic impedance value than the cytoskeleton. The results of this study could contribute to establishing a method for monitoring the internal condition of cultured cells in regenerative medicine and drug discovery.

Design and Construction of a Chamber Enabling the Observation of Living Cells in the Field of a Constant Magnetic Force.

The aim of the work was to design and construct a microscopic stage that enables the observation of biological cells in a magnetic field with a constant magnetic force. Regarding the requirements for biological observations in the magnetic field, construction was based on the standard automatic stage of an optical microscope ZEISS Axio Observer, and the main challenge was to design a set of magnets which were the source of a field in which the magnetic force was constant in the observation zone. Another challenge was to design a magnet arrangement producing a weak magnetic field to manipulate the cells without harming them. The Halbach array of magnets was constructed using permanent cubic neodymium magnets mounted on a 3D printed polymer ring. Four sets of magnets were used, differing in their dimensions, namely, 20, 15, 12, and 10 mm. The polymer rings were designed to resist magnetic forces and to keep their shape undisturbed when working under biological conditions. To check the usability of the constructs, experiments with magnetic microparticles were executed. Magnetic microparticles were placed under the microscope and their movement was observed to find the acting magnetic force.

Single-Cell Live Imaging.

Recent fluorescence microscopy allows for high-throughput acquisition of 5D (X, Y, Z, T, and Color) images in various targets such as cultured cells, 3D spheroid/organoid, and even living tissue with single-cell resolution. The technology is considered promising to augment insights on heterogeneous features of both physiological and pathological cell phenotypes, for instance, distinct responses of cancer cells to anticancer drug treatment. Here we overview microscopic applications to capture live cell events for different types of targets, together with a couple of proof of concepts. The 2D live imaging will be exemplified by a FRET-based time-lapse cultured cell imaging, and 3D tissue imaging protocol will be complemented with a method for mouse skin live imaging.

Optical and biological properties of transparent nanocrystalline hydroxyapatite obtained through spark plasma sintering.

Transparent bioceramics have attracted a large amount of research interest as they facilitate direct observation of biointerfacial reactions. Thus far, attempts to achieve transparent hydroxyapatite have been focused on augmenting the sintering pressure and/or extending the sintering duration. This study aims at fabricating transparent HA using a direct and fast spark plasma sintering process with appropriate starting powder and moderate sintering pressure. Three types of raw powder, namely micro-spheres, nano-rods and nano-spheres, were sintered to investigate the optical and biological properties of the compacted pellets. It was found that in terms of transparency, the micro-sphere pellet sintered at 1000°C stood out with an in-line transmittance as high as 84% achieved at 1300nm for a 2mm thick sample. In addition, pellets fabricated from micro-spheres demonstrated the highest cell viability in in vitro biological tests with L929 cells. Living cells cultured on a transparent micro-sphere pellet could be directly and clearly observed by light microscopy. It is thus concluded that the micro-sphere powder is the most desirable raw material to manufacture transparent hydroxyapatite because it could enable dense pellets with notably high transparency and outstanding in vitro biocompatibility to be readily obtained.

Robust patterning of gene expression based on internal coordinate system of cells.

Cell-to-cell communication in multicellular organisms is established through the transmission of various kinds of chemical substances such as proteins. It is well known that gene expression triggered by a chemical substance in individuals has stable spatial patterns despite the individual differences in concentration patterns of the chemical substance. This fact reveals an important property of multicellular organisms called "robustness", which allows the organisms to generate their forms while maintaining proportion. Robustness has been conventionally accounted for by the stability of solutions of dynamical equations that represent a specific interaction network of chemical substances. However, any biological system is composed of autonomous elements. In general, an autonomous element does not merely accept information on the chemical substance from the environment; instead, it accepts the information based on its own criteria for reaction. Therefore, this phenomenon needs to be considered from the viewpoint of cells. Such a viewpoint is expected to allow the consideration of the autonomy of cells in multicellular organisms. This study aims to explain theoretically the robust patterning of gene expression from the viewpoint of cells. For this purpose, we introduced a new operator for transforming a state variable of a chemical substance from an external coordinate system to an internal coordinate system of each cell, which describes the observation of the chemical substance by cells. We then applied this operator to the simplest reaction-diffusion model of the chemical substance to investigate observation effects by cells. Our mathematical analysis of this extended model indicates that the robust patterning of gene expression against individual differences in concentration pattern of the chemical substance can be explained from the viewpoint of cells if there is a regulation field that compensates for the difference between cells seen in the observation results. This result provides a new insight into the investigation of the mechanism of robust patterning in biological systems composed of individual elements.